ATV "in use" when trying to play iTunes multispeaker from my Mac
Whenever I try to turn on "multispeakers" from my Mac (so that I can play the music across my ATV sound system) I get an error message saying that the Apple TV speakers cannot be connected as they're "already in use".
What steps do I need to perform to mac the ATV be ON (but not "In Use") so that I can use multiple speakers?
press and hold the menu button on the remote 'til you get to the top level menu... should solve it..
if that doesn't work then just restart your appleTV... press and hold menu + down button and follow instructions 'til get option to restart.
Similar Messages
-
Why does apple application support pop up when trying to play Itunes?
Hello out there, I need help with my Itunes. Went to Itunes and a message popped up stating "Apple Application Support not found. It is needed to run Itunes.
Windows Error2. Why is this happening, have played Itunes in the past. I have uninstalled and reinstalled and same message pops up .I am using a HP PC.Have you tried this support article ? http://support.apple.com/kb/ts3074
-
We are trying to play playlists and a slideshow from an Apple Macbook wirelessly to the Apple TV. The small, upward arrow icon that appears on the bottom right of the screen (which allows you to pick Computer or Apple TV) doesn't always show up, and therefore, we can't get it to work. Any thoughts?
Airplay mirroring software will not work with anything below Mountain Lion 10.8 and an Apple computer from 2011 or newer.
http://support.apple.com/kb/HT5404
Go to "About this Mac" and tell us:
1. What OS X version you are running
And then click on "More Info" and tell us
1. What year is your Macbook.
Also tell us a little about your cable and Wireless setup.
Maybe we can help. -
New version of Firefox is hanging when trying to play a file from the BBC iPlayer
When trying to click on the 'Play' button on the BBC iPlayer site http://www.bbc.co.uk/iplayer/radio/categories/drama, Firefox hangs and does not allow me to click on anything else on any of the open tabs.
If I use the task master to close Firefox and then try to reopen it, I get a message saying that it is already open. Only restarting the computer will allow me to start it again.do some working around, remove the old version, download the latest version from mozilla official, and do the new install, and install the addons. update problems are more than you can think over, so just do a new complete for sure. update sometimes is really time wasting......
-
Itunes quits when trying to play purchased movies from itunes store
Mac OS X 10.4.10 Dual G5 No add ons. Everytime I try to play purchased movies or purchase a movie itunes quits. it seems this began after a recent updates as I noticed the issue when i tried to purchase a movie it downloaded and crashed while processing file. I tried to open a previously purchased movie and crash again. I rebuilt the xml file and cleared preferences. Any ideas?
Hi, did you find an answer to the problem, as I have the same one (with Wiindows 8)
-
Error message when trying to play iTunes purchased movies
Hi,
I have purchased a TV show from iTunes using my Apple TV 3rd generation and whenever I attempt to view the purchased item a message appears on the TV saying "An error occurred loading this content. Please try again later".
I have tried power cycling, restarting the router, resetting and restoring, without any success.
Any ideas?
All help appreciated.
Thanks.After fiddling around with it, I have managed to fix this by adjusting the Internet speed preferences in the Apple TV settings menu.
Hope this helps someone else with the same problem. -
TS2278 Error Occured when trying to play iTunes on Apple TV with PC
15000 when streaming to AirPort Express base stations using iTunes with a PC
Are you only having trouble streaming from this particular PC or any network client to the Apple TV? How is the PC connected to the network, specifically by wire or wireless? What is the make and model of your wireless router? I assume that the Apple TV is connected by wireless to this same router ... correct? What operating system is your PC running?
-
Black Screen when trying to play iTunes Movies PLEASE HELP
This is my set up. I have an iMac running OS X (10.5) and a mac mini running (10.6) this mac mini is hooked up to my tv in the living room, it also is fitted with an external hard drive (this is where my itunes media folder is located for my mac mini). I enabled home sharing on both macs and they are both authorized to play my media. I recently downloaded two movies on my iMac and transferred them to my mac mini. Now here is the problem. I can play the movies fine on my iMac but when i try to play them on my mac mini all i get is a black screen with no sound. The movie is playing on the mac mini because i see the time bar moving but nothing is on the screen.
Please help.In an attempt to consolidate numerous threads about video problems with Flash Player 11.2.202.228 I've created a new post where I'd like to have people who are still encountering this issue to either post or link to an existing post with their information.
Video investigation with Flash Player 11.2.202.228
We're asking for 4 pieces of information
1. A brief explanation of the problem
2. Did disabling hardware acceleration fix the issue
3. A sample URL
4. A copy of your dxdiag report
If you've already provided all 4 answers to us, thank you and please take a minute and copy the URL of your post (right click on the highlighted title of your post as shown in the example screenshot below) and paste it as a reply so your input is not lost.
If you haven't provided these answers, we ask that you take a few minutes and create a new post with the required information. -
When trying to play a song from a play list on my phone it automatically skips to another song
This is happening on my ipod and iphone; I'll select a song to start playing from a playlist and it automatically skips ahead 1-3 songs and starts playing, and whenever I try to play that song it does it again. Some songs we put into itunes from disks and some were bought from itunes and it doesn't seem to discriminate against either type and it's really bugging the crap out of me! Just started about a week ago....any suggestions? clues?
It could be because of a corrupted song. Usually a resync will solve this issue. Try the following form of troubleshooting to find out which song is corrupted.
Select Manually Manage Music and Media (or videos, can't recall which). Select half of your library and sync it to one device, and sync the other half to the other device. Play the songs and see which device skips. If only one skips, then it means that the half of the library that you synced to that device contains the song causing the problems. Split that half of the library in half and keep repeating the syncing/testing/splitting process until you find the song. Then delete/redownload the song. If both skip then it may be multiple songs. -
Am getting PCM output error message when trying to play a video from iPad2 on my TV
The movie was purchased on iTunes store. I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound. After a few minutes and every few minutes after that the movie would blur and blackout then it would come back. Eventually I got a PCM OUTPUT error message onscreen. How do I resolve this problem?
I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.
-
Use iPhone 4 to play iTunes library from an external hard drive without computer
Hello all-
I use iTunes for playback of my music library. My library is too large to be stored locally on my MBP so I use an external hard drive. I was wondering if anyone knew of a way to use / setup an iPhone 4 to be able to read the iTunes library files and access the music stored on the external hard disc for playback WITHOUT the use of my MBP or any other computer. I may be asking too much but essentially it is just code that is written into iTunes that allows this to happen, between computer and external hard drive as well as iPod and it's hard disk. Of course I would need to be able to connect my iPhone to the external hard drive. I figure the dock to usb cable would suffice.
Any help is appreciated!
rthanks for the quick reply! I was hoping to not only access the individual files, but use an actual user interface that could read the iTunes library files that I already have created via iTunes on my MBP, and provide me with an iTunes like playback experience, similar to how the Remote app works or the iPod app. Thanks though, I might use NetPortal for other applications though.
r -
"Unknown Error" when trying to move a folder from local MAC drive to External HDD
Help?
Thanks`Hi,
Are you trying to move the folder to the root level of the target external drive. If so try first making a folder in external drive and then retry moving to that new folder. A similar problem was reported in this thread http://forums.adobe.com/message/2950191#2950191 on windows where you could not export to the root level of a disk. I recall having a similar problem on my Mac and I believe that it was the same.
-louie -
im still stuck with the ios 10.6.8
The iOS 7 is only for iPods, iPhones and iPads. It is not for Macs.
Allan -
An error 2096 comes up on screen when trying to play iTunes from quick time says to uninstall tunes then re-install !! Started to happen after last upgrade from quick +iTunes and is frustrating as can't play anything ,is on Windows XP and was fine till now! Thanks in advance.
Is your QuickTime working if you try to open it?
If you get a 2096 error, see:
http://support.apple.com/kb/TS1875
Otherwise see:
http://support.apple.com/kb/TS1489
If your QuickTime works normally let me know.
The 2096 error has often been associated with compatability mode problems.
Otherwise try a complete removal of all iTunes related programs:
http://support.apple.com/kb/HT1925
Then download and install the version of Quicktime that does not include iTunes:
http://www.apple.com/quicktime/download/win.html
Check that it works
Then try installing iTunes. -
Getting message "file cannot be found" when trying to play music in iTunes
When trying to play ANY music in my iTunes Library I get the message that the file containing the music cannot be found. I recently updated to the latest version of iTunes - is this the problem or is it something else?? I thought that at least the songs purchased from the iTunes Store would play but they do not. I receive the same message which asks if I want to attempt to locate the file. I click yes and that takes me to the iTunes Library which gets me nowhere. Anyone have any ideas????? I have used iTunes for years with no problems before this.
Hi Patricia,
First, try Repairing Disk Permissions. Quit all open applications. Launch Disk Utility, it's in your Applications/Utilities folder. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Repair Disk Permissions. Only takes a few minutes to run, then Quit Disk Utility. Reboot your PBook and launch iTunes. See if you can play a track...
If not... with iTunes open, select iTunes Store, then from the Menu Bar, click Store/Authorize Computer and see if that works. If that doesn't work ...
Quit iTunes. Try dragging the com.apple.iTunes.plist file from the HD/Users/YourName/Library/Preferences folder to your Desktop. Launch iTunes and see if you can play tracks. If you can, drag that file back to the Preferences folder. If not, drag that file to the Trash, empty the Trash and reboot. It could be your iTunes preferences file is corrupted and needs replacing. Your Mac will create a new pref file for you the next time you launch iTunes.
Hope something helps...
Carolyn
Message was edited by: Carolyn Samit
Maybe you are looking for
-
New Infinity Installation. No internet connection ...
Hi. Had Infinity installed on Thursday afternoon and was initially impressed with 40Mb+ download and 15Mb upload speeds. However, at about 5.30pm webpages stopped loading. Rebooted the HomeHub3 and was ok again for about 15 minutes but then nothing f
-
Show only part of a list in dependencies of a node
I have a XMLlistCollection who shall fill up my Applikation. In some views I only want to show a part of all entries. Equivalent to a mysql query where I can say: give me all where myNode contains this string. Is there a way to to so? I did a researc
-
PR numbers are jumping-Not sequential
Hi Friends, The PR numbers are not coming sequentially. Its jumping like 10000000, 10000010, 10000030, 10000035, 10000041, 10000046. In SPRO, internal number range interval is set as 1. How to solve this problem as this problem is coming in Productio
-
One of our IT engineers at work mentioned the security of our home networks could be substantially improved by using a properly configured Sonicwall TZ 105 with the comprehensive security option (sold as a separate item from the Sonicwall hardware).
-
My BG (Background Insert Image) Selection is missing in the Properties Panel of my new Dreamweaver C6. I just moved up from an earlier version of Dreamweaver which did have it. How can I get the BG Image Insert / change link? Thanks