ATV no longer connects any mobile devices.
I can't connect to my ATV with my iphones or ipad. Home sharing is on on all my devices wifi is connected. I can get netflix with it I can connect with my macbook. But I can't use the remote app or connect with the ipod or pictures or movies. they were all working until I updated itunes now I can only use itunes from the macbook to conect to the ATV.
Yeah they're both on the same network and have no WiFi issues other than sync. IP scheme is good & stuff. Think I might have just fixed it. I've rebooted the machine (desktop that's hard wired to the router) several times to no avail. Just now I booted the machine down, the restarted the router, then booted the machine back up. As soon as I started iTunes, both devices came up like before. Must have been the router not cooperating I guess.
Similar Messages
-
DV6-701nr cannot connect any mobile device by USB
I have a Samsung Galaxy Note 4 and am experiencing a new issue: without having installed anything new on the laptop, I can no longer see my Note 4 as a USB mass storage device on the laptop. Thinking it may be the phone and not the laptop, I tried connecting a Motorola Moto X and nothing. The laptop does not recognize these devices at all.
That said, I CAN remove the microSD cards from the phones, place them in a USB adapter, and they show up just fine. Only when I use the cable to connect these devices directly does it fail to read. I have used multiple cables, so I really don't think all these cable are bad (or power only).
I have reinstalled the Samsung USB drivers, to no avail.
What can you suggest so that I can plug my phone in and move files back & forth, without having to remove the microSD card every time? Thanks!Hi @WWWilkie
Thank you for your inquiry, I will do my best to assist you!
I understand that when you connect your phone it is not longer seen. Thinking it may be the phone you tried another phone but it too was not seen.
You have tried different cables and uninstalling and reinstalling the drivers for the phone. You can remove the SD card and insert it an USB adapter the notebook finds it.
If you connect your phone to a different computer, is it recognized?
When the phone is connected if you check disk management was there a drive letter assigned to the phone or maybe a drive letter conflict.
If a drive letter is not assign , please assign a driver letter. If there should be a driver letter conflict try changing the driver letter.
You could also try running MS Fix It to help overcome this difficulty?
If this has not helped you could try doing a restore back to when it was recognized properly.
HP Notebook PCs - Using Microsoft System Restore
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios? I have all the apps in Creative Cloud by the way.
If you already purchased it with the same Apple ID, then you will not be re-charged.
-
I cannot get iTunes 11.1.4 to install. I have tried uninstalling iTunes and downloading itues again witha manual install. It always fails because it cant get the mobile device part to work. I am the administrator and I don't have ANY mobile devices. I just want to update the program on my PC - and now I don't have any iTunes at all.
The best information on dealing with the iTunes install is in the user tip: https://discussions.apple.com/docs/DOC-6562
-
My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please adviceMy Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice -
Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!
Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
My Airport Extreme no longer will allow any wireless devices to connect to the internet. I have tried resetting and unplugging the device and the modem without any success. I only have internet access through a wired desktop connection. The desktop is running on windows 7 and 2 laptops are running on Windows 8. (This had been working for the past 8 or 9 months. The problem started last week.). I had my cable company reset the modem on their side and still no luck. Does anyone know how I can fix this issue. The Extreme has dropped the connection to the printer, dvd players, game consoles, ipads and iphones.
Open AirPort Utility, click on the AirPort Extreme, then click Manual Setup
Click the Internet icon, then click the Internet Connection tab
The setting for Connection Sharing should read Share a public IP address
If you change the setting, click Update at the lower right to save the new setting
Wait a minute for the AirPort Extreme to restart, then power off both the modem and AirPort Extreme
Wait at least 15 minutes
Power up the modem first and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it runa few minutes
Check the network -
What is wrong with itunes and connecting their mobile devices to a windows computer
I have an apple iPhone and two other apple devices None of which can connect and be recognized on my Alienware computer with with windows 7. The problem is never quiet the same, some times it isn't recognized and doesn't show up on itunes at all and other times i connects and disconnects rapidly. Only rarely does it sync and stay connected long enough to download a few songs, other than that its a pure hassle to deal with and is starting to become highly annoying and makes me wonder if the phone would be more useful being hit with a golf club. open to any solutions
In addition to my previous message i have discovered some new information about the problem. the mobile device driver that is installed with itunes is currupt and personal trouble shooting along with auto trouble shooting can find a solution to this problem. might possibly been an imcomplete download offered by itunes. WAY TO GO
-
FTP connection on mobile device works over wifi but fails over 3G
Hi all,
Hoping someone can help, or has come across this issue.
I am developing a mobile app using flash builder 4.6 with the flex 4.6 sdk. My app needs to transfer files via ftp.
The issue I am experiencing is that the ftp connection establishes and files transfer without a problem when connected via wifi, on both android and ios platforms.
However, when only connecting via a 3G connection on a device, a problem occurs. While I can establish a connection, when I send the USER command, I never receive a response.
A simple view with code to reproduce this issue is listed below. Has anyone come across this problem? I have been searching far and wide but cannot find anything related.
Could this be an issue with Adobe Air or the socket class? I have written equivalent code using the android sdk in eclipse, and a connection to the same server and user details works on both wifi and 3g connections.
Any help would be appreciated.
Thanks.
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
<fx:Script>
<![CDATA[
private var commands:Array;
private var s:Socket;
private var data_channel:Socket;
private function connectToFtp():void
var ftp_response:String;
var data_response:String;
var data_channel_ip:String;
var data_channel_port:int;
s = new Socket();
s.addEventListener(Event.CLOSE, closeConnection);
s.addEventListener(Event.CONNECT, connectionMade);
s.addEventListener(IOErrorEvent.IO_ERROR, showError);
s.addEventListener(SecurityErrorEvent.SECURITY_ERROR, showSecError);
s.addEventListener(ProgressEvent.SOCKET_DATA, receiveReply);
s.connect("mydomain.com", 21);
function receiveReply(e:ProgressEvent):void{
ftp_response = s.readUTFBytes(s.bytesAvailable);
trace(ftp_response);
var code:String = ftp_response.substr(0, 3);
if (code == "220")
// connected.
// send user command
s.writeUTFBytes("USER myUserName\n");
s.flush();
else if (code == "331")
// user command sent. password required
// send password
s.writeUTFBytes("PASS myPassword\n");
s.flush();
else if (code == "230")
// login successful
// change directory
s.writeUTFBytes("CWD /fibreSyncFtp/\n");
s.flush();
else if (code == "250")
// change directory successful
// send passive command
s.writeUTFBytes("PASV\n");
s.flush();
else if(code == "227")
//get the ip from the string response
var temp:String = ftp_response.substring(ftp_response.indexOf("(") + 1, ftp_response.indexOf(")"));
var data_channel_temp:Array = temp.split(",");
data_channel_ip = data_channel_temp.slice(0,4).join(".");
//calculate the port number from the last two digits - if this makes no sense, google
// FTP PROTOCOL - there are loads of guides that explain the server responses.
data_channel_port = parseInt(data_channel_temp[4]) * 256 + int(data_channel_temp[5]);
data_channel = new Socket(data_channel_ip, data_channel_port);
data_channel.addEventListener(ProgressEvent.SOCKET_DATA, receiveData);
s.writeUTFBytes("LIST\n");
s.flush();
else if (code == "125")
//use the new IP to open a second socket - this will transmit the data.
// Your first socket will transmit any commands you issue and this new socket will transmit the data
else if (code == "226")
// transfer complete
// close the connection
//s.close();
else if (code == "425")
// can't open connection
function connectionMade(e:Event):void
trace("Connection Made");
function receiveData(e:ProgressEvent):void{
data_response = data_channel.readUTFBytes(data_channel.bytesAvailable);
trace(data_response);
function showError(e:IOErrorEvent):void{
trace(e.text);
function showSecError(e:SecurityErrorEvent):void{
trace(e.text);
function closeConnection(e:Event):void{
trace(e.type);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Button top="10" label="FTP" click="connectToFtp()" horizontalCenter="0"/>
</s:View>Probably you need to write your own AIR native extension, which uses the native Android sockets..I have the same problem and I'm just starting writing the extension...I guess there is no other way..At least you test with native android socket and you confirm is fine, so we know it should work
-
I cannot connect any Apple device to my business network. iPhone or iPad
Several employees and the owner of the company have iPhones and iPads but not one single person can connect any of them to my Wi-Fi network. All Android devices and all laptops (we do not have any Macs) can connect just fine. What are we doing wrong??
What do you mean by "what kind of wifi?"
I have a Cisco 1710 router
Its an open network so no wep/wpa.
how do I find out if I am using Mac Filtering?
Yes I do broadcast the SSID and the devices pick it up just fine but when I try to join it simply says "unable to connect to west101."
Unfortunately I am totally illiterate when it comes to networking. I work for a small company with 4 branches and about 30 employees. We have extremely poor IT support that is bundled into a licensing agreement with our software provider. We cannot afford outside IT help and they fired the guy who did have some IT knowledge. Now I am the "IT liasion" (hahahahaha what a joke). Should I start by reading "Networking for Dummies" or do you know of a better book/website to start with? -
ITunes 10 installed now no Connection - Apple Mobil Device?
Help!
Just installed iTunes 10, and now there is no connection to my iPhone4?
message is as Follows - Can´t find Apple Mobile Device??
Deinstalled iTunes, ran CleanUp, Reinstalled iTunes.... Same Message?
even Reinstalled the USB driver.... but nothing!
PLEASE HELP ME SOMEONE!!!
Greetz
AdamWelcome to the discussions,
check this article about reinstalling AMDS: http://support.apple.com/kb/TS1567
and this one about removing and reinstalling all Apple related software: http://support.apple.com/kb/HT1923 -
after updat iTunes to the 11.2.2(3) ver I cannot connect any device iTunes after connect device (iPad3, IP5S) is hanging.. and I have to force iTunes to close. do U have the same problems?
Hey there Michal115,
It sounds like you are unable to connect your iOS devices without it becoming unresponsive. That would frustrate me too. I would use the following article about that very issue to help you resolve that:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Start with these 3 steps to make sure the other devices are up to date as well, and there is additional troubleshooting to be done in the article if needed:
Install any available software updates for your computer.
For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions.
For Windows: Refer to the documentation for your computer for instructions on using Windows Update to update your computer.
Update iTunes to the latest version.
For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions. You can also download iTunes from the Apple website.
For Windows: Use Apple Software Update, or download iTunes from the Apple website.
Test with automatic syncing disabled.
For Mac OS X: Click the iTunes menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
For Windows: Click the Edit menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
Reconnect your device and test to see if the issue still occurs. If your device is recognized successfully, you may be able to isolate which type of data is causing the issue. Do this by deselecting all syncing options under each of the syncing tabs and then sync. After that, re-enable your sync options one at a time until the issue returns.
Note: If the issue only occurs when syncing data from the Info tab is enabled (For example: Contact, Calendar, Mail account or Bookmark syncing), reset the Sync History (for Mac OS X instructions see this article, for Windows see this article).
Thank you for using Apple Support Communities.
All the very best,
Sterling -
ITunes Freezes when connecting ANY iOS device
So, my issue is exactly what the title describes, but let me give some more detail.
I have a MacBook Pro (OSX 10.9.5) that's currently running iTunes 11.4. My issue is that every time I connect any of my iOS devices (or my wife's or friends') as soon as iTunes begins to detect an iOS device, it freezes. The computer doesn't freeze, the device doesn't freeze, just iTunes - as soon as the device name pops up in the upper right corner of iTunes, the program freezes.
This issue did not happen on previous versions of iTunes (I think on 11.2 and earlier), but as soon as I updated, it started happening. For a while, I just kept a previous version of iTunes so that I could keep syncing my devise, but when I got my iPhone 5 (recently) it won’t requires the newer iTunes version, so I can’t keep doing that.
I have tried uninstalling and reinstalling iTunes multiple times with no success. I have tried resetting the devices, making sure all updates are done on all devices, etc.
To be clear, I have tried this with multiple different devices (iPod Touch 3rdGen, iPad 2, iPod Touch 4thGen, iPad Mini, iPhone 5) and it does exactly the same thing with all of them – it does not happen with any of these devices when connecting them to my wife’s PC or my work MacBook Pro. This makes me assume that it is an issue with either my Macbook Pro, or with how iTunes is installed on it.Alright, here's what I got for you from the console:
10/8/14 7:38:06.415 AM SyncServer[2210]: [0x7fa96b506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332201472 bytes free in admin.
10/8/14 7:38:06.417 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2210]) Exited with code: 1
10/8/14 7:38:07.058 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:07.308 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:15.626 AM iTunes[2204]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
10/8/14 7:38:15.627 AM iTunes[2204]: Failed to create replacement string
**repeat previous line 33 more times**
10/8/14 7:38:15.636 AM iTunes[2204]: tid:26c0b - unable to query device capabilities
10/8/14 7:38:15.636 AM iTunes[2204]: Failed to create replacement string
**repeat previous line 83 more times**
10/8/14 7:38:16.614 AM com.apple.usbmuxd[1468]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,98c70826
10/8/14 7:38:17.337 AM SyncServer[2214]: [0x7f9dfbd06750] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332180992 bytes free in admin.
10/8/14 7:38:17.339 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2214]) Exited with code: 1
10/8/14 7:38:17.574 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:17.854 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:18.456 AM com.apple.SecurityServer[14]: Session 100047 created
10/8/14 7:38:18.457 AM com.apple.SecurityServer[14]: Killing auth hosts
10/8/14 7:38:18.457 AM com.apple.SecurityServer[14]: Session 100043 destroyed
10/8/14 7:38:27.603 AM SyncServer[2217]: [0x7fc1435068a0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332176896 bytes free in admin.
10/8/14 7:38:27.605 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2217]) Exited with code: 1
10/8/14 7:38:28.692 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:28.837 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:28.945 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 9 seconds
10/8/14 7:38:38.038 AM SyncServer[2218]: [0x7fee62506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332176896 bytes free in admin.
10/8/14 7:38:38.040 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2218]) Exited with code: 1
10/8/14 7:38:38.356 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:38.607 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:39.000 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:48.635 AM SyncServer[2219]: [0x7fd2bad068a0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332078592 bytes free in admin.
10/8/14 7:38:48.637 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2219]) Exited with code: 1
10/8/14 7:38:49.162 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:49.284 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:49.315 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:59.418 AM SyncServer[2220]: [0x7fa659506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332078592 bytes free in admin.
10/8/14 7:38:59.420 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2220]) Exited with code: 1
10/8/14 7:39:00.294 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:39:00.542 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 9 seconds
10/8/14 7:39:00.576 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
I sorted through most of the code and I don't think I got anything too extraneous in there nor do I think I got any of my personal info in there. Any help you can provide would be much appreciated. Thanks in advance! -
ITunes No longer connects to WiFi Devices
So I have an iPhone and an iPad 2. Since the release of OS5, I've been using WiFi sync and it's worked great.
All of a sudden in the past few days, my iTunes will NOT connect to either device. Nothing changed that I know of, it just doesn't work anymore.
I used to start iTunes and it would automatically find the devices and show them in the list on the left hand side. Now that doesn't happen, and when I try to sync from the devices, it says iTunes is unavailable.
Suggestions? thanks!Yeah they're both on the same network and have no WiFi issues other than sync. IP scheme is good & stuff. Think I might have just fixed it. I've rebooted the machine (desktop that's hard wired to the router) several times to no avail. Just now I booted the machine down, the restarted the router, then booted the machine back up. As soon as I started iTunes, both devices came up like before. Must have been the router not cooperating I guess.
-
How can I connect my mobile device on the same network with my printer
I have pictures on my mobile device but I am unable to print them on my HP Photosmart plus printer. I was wondering how am I able to make sure that my printer and my mobile device is on the same network so I can print my pictures or either be able to save them to my memory card?
Hi,
Are you talking about iPad, iPhone ?? If YES then please check your printer on this list,(updated on 15Dec2011) it must be an AirPrint enabled printer to be able to print from iPad, iPhone. If YES (again), you can use AirPrint on your iPad to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
I have a LaserJet 5100 - purchased in 2005 - worked great until I just bought a new HP Pavilion computer. It prints normal text fine but having issues printing 11x17 pdf drawings. I have tried loading updated drivers from HP site, called HP and tal
-
My iMac will not go to sleep when I press the rear power button.
It will, however, if I press sleep in the apple menu using the mouse. This has recently started since I upgraded the memory and ran disk doctor. I know the rear button is not broken as it feels fine and powers up the computer when switched off. I hav
-
Migrating MS ACCESS FORMS TO Oracle FORMS9i
Hello , can someone tell me, how i can migrate a whole MS ACCESS 2000 mdb (with forms) to Oracle. I think i have first migrate the Access DB with the OMWB to Oracle and in the next Step to convert the VBA Code to JAVA or Forms9i. Is there a tool avai
-
Hi Experts Can anyone please advise how can HTML / Word editor be configured in SO10. The only option right now is standard text editor and even after changing editor, it doesn't help. Please advise. thank you Regards Neha
-
My screen is not resounding and my sleep button is broken
A few months ago the sleep button on the top of my iPhone 4s stopped workng so I set up a quick button on my screen that I can put it to sleep with. Now my screen is not working, only that quick button is working. Help!