ATV Post 2.3 update: i have exhausted all options....what to do next?

after all my attempts to get my atv to work again, my atv is useless post 2.3 update. remote doesnt respond/atv freezes.......
any further suggestions.............

Hello, scouseboy02.
I would recommend trying the steps in this article to troubleshoot the iOS device not being recognized in iTunes. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8. If the issue still persists, try all remaining steps in the article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Also, try testing other USB ports as well as disable any security software installed.
Cheers,
Jason H.

Similar Messages

HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH....

HT1420 No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
This will be required for another two weeks.

All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection

All my PC's and computer(both Apple and Microsoft) will conect to internet except appleTV I have exhausted all resets, It did work yesterday now no connection Has anyone had same problem ?

Resets are not a solution. Have you done any actual trouble shooting? What is the actual symptom you are experiencing? If you are using WiFi have you tried directly connecting it using a wired connection.

I have an iPhone 4. I unplugged my phone during an update and have lost all pictures and videos from the last year. Is there any way to restore from a certain date to recover?

I have an iPhone 4. I unplugged my phone during an update and have lost all pictures, text messages and videos from the last year. Is there any way to restore from a certain date to recover them?

If you have a current backup you can restore your phone to that backup. http://support.apple.com/kb/HT1766

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

HT201365 Since updating my iphone and adding icloud, I can no longer retrieve my yahoo mail. I've already exhausted all options in the settings menu on my iphone. What next? Thanks!

Since updating my iphone and adding icloud, I can no longer retrieve my yahoo mail. I've already exhausted all options in the settings menu on my iphone. What next? Thanks!

I just want to be able to USE iCloud on my phone
To do that, you don't go to iCloud.com on your iPhone. You use the apps that all your iCloud data is synced into, such as Mail, Contacts, Calendars, Notes, Reminders, Safari (for bookmarks), Photos (for Photostream) etc.

HT1277 i have added my company e-mail add into my Macbook i receive mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

i have added my company e-mail add into my MacBook , i recive e-mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

Hello,
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Where can I find the software updates? Have looked all over the site!

Where can I find the software updates for Ipad 2? Have looked all over the site!

You update through iTunes if you have iOS 4. If you have iOS 5 then tap Settings > General > Software Update.

Updated to ios7. Ipad decided it wanted a password, after a day of ios7, and after exhausting all options it "disabled" itself. Tried all the Apple suggestions. No luck. Anyone else have this problem and did you find a solution?

Nothing about 7compensates for this betrayal.

I read the set up information after the update. When it asked if I wanted to add password I said no.
http://support.apple.com/kb/HT1212

I have a gen3 iPod touch. It shows the battery charging when I plug into my PC, but will not show as an extra drive in "my computer" and won't show up in iTunes either. Can anyone help please? I have exhausted all "help" options.

I am trying to get my iPod touch (3rd gen), to show up in "My Computer" and in iTunes. I am using a usb cable and it is connecting okay, because the battery is charging. It won't show up as an external drive on my computer, and nothing in iTunes either. I have used the exact same usb cable and plugged into the exact same usb port with a different iPod touch without having this problem. I have swapped them back and forth and it seems to be a problem with this particular iPod, because the other shows up just fine. I have already downloaded and installed the latest iTunes update, and I already restarted the computer afterwards. The other iPod is a 4th gen touch, but that really shouldn't matter. I would greatly appreciate anyone's help on this matter. I know that I can't be the first person that this has happened to. Thanks.

Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone.

When the "degregister iMessage" page tells me I have exhausted all of my tries, try again later, how long do I have to wait to try again?

I think I solved my problem of not receiving the code to deregister my number for iMessages, but now it tells me I can't submit my number because I've ran out of entries. How long do I have to wait until I can retry?????
Add this to the list of reasons I switched to Android...

Connect to iTune and "Check for Update" (tap to enalrge image)

After an update I have lost all my Reminderfox entries!

Firefox must have done updates of Aniweather and Colourtabs, but I have lost Reminderfox and all entries

See [[Add-ons are disabled after updating Firefox]]
Make sure you have the latest version of the [https://addons.mozilla.org/firefox/addon/reminderfox/ ReminderFox add-on] and restart Firefox.
You can also visit http://www.reminderfox.org/ and click on the Help link.

I have tried all options given but none worked and since Firefox conducted a security update, I have lost ALL bookmarks!

I have tried the many different solutions (if not all or at least most) given by Mozilla for retrieving my bookmarks and none of them work. My bookmarks went missing after a security download/update from Firefox. I have many, many bookmarks and I do need the majority of them! What am I to do now? This is very disappointing as I so enjoy Firefox and have used it happily for years. Kindly help me with this situation as I can not even imagine trying to recall and re-bookmark them all. I can't say I would even trust bookmarks anymore. Thank you for your help...I am not a tech wizard but have tried what the site suggested.

I also have to add that this all happened after Firefox version 28.0 was updated...very disappointed.

XPJ file appears to be corrupt -- have exhausted all known fixes

Hello all,
Before I forget, here's the rundown on our system:
RoboHelp 8, version 8.0.2.208 (all patches up-to-date, to our knowledge); RoboHTML used exclusively
Microsoft Visual SourceSafe 2005, version 8.0.50727.42
Windows XP
Three help projects
Two on VSS; third does not work right from VSS, so we update it separately
One of the two on VSS appears to be corrupt (see below) -- RoboHelp hangs when trying to launch the XPJ file
All other help projects are fine
Four help authors
Background of the problem:
On Tuesday late afternoon, one of our authors was in the help project in question and had several topics checked out when our network went down. She closed the help project with the files still checked out, and when the network came back up, she went back in, got the expected messages about "files are checked out, do you want to replace them with the version from source control or keep them checked out and use your local copy." Since she didn't want to lose her changes, I instructed her to keep them checked out, and then check them back in when everything came up. However, when she tried to check them back in, RoboHelp hung. This was late in the day, so she closed down RH manually and resolved to deal with it in the morning.
The next morning, one of our other authors, who gets in very early, was able to get into the help project just fine and work in it all day. This second author was not aware that the problems from the previous day continued. I was also able to get into the help project at this time. The first author then tried to get into the help project, but wasn't able to get in at all. The second author needed to get into the checked out files to make changes, so I instructed the first author on how to go into VSS and check those files in directly from there, without having to get into RH. At this point, I assumed the problem resided only with the first author's instance of the project, but I didn't think that checking in some topics would exacerbate the problem. (Maybe it did.) I figured, at most, we might need to pull down the help project from the network to her C drive again to fix the problem.
A little while later, the third author and I both tried to get into the help project and were not able to. At this point, only the second author, who had gotten into the project early in the morning, was in the help project and was not having any problems. At the end of the day yesterday, she saved and checked in all of her files. However, this morning, she came in and now she is not able to get into the help project, either.
Troubleshooting attempted:
The error dialog that displays when you shut down an app manually indicates that the app has hung. (No kidding, but thought I'd better say I looked at it.) The actual error reports, of course, were incomprehensible.
Attempted to launch XPJ without source control: Made a copy of the help project to a different location and deleted the vssver2.scc files in the copy. Tried to launch XPJ and it hung.
Attempted to rebuild the XPJ and CPD files: Backed up the help project on C drive, deleted CPD file, renamed XPJ file, and then double-clicked the HHP file. Had to copy and paste the path to the RoboHTML.exe file in the Locate Program dialog box. Received an error that the HHP file is corrupt. Then opened RoboHelp and tried launching the HHP file from the Starter window. Received messages about making various APJ and FPJ files writable. Thought this was a good sign, so I clicked OK on all of them, and then RH hung again.
Pulled down a new version in source control to my C drive, but RH still hangs when launching XPJ. This problem appears to be with the version in source control as well.
At this point, we're afraid our only course of action is to get our IT department to revert the entire help project in source control to the version that existed before the network went down on Tuesday and then pull that version to our C drives. However, we will lose some work from late Tuesday and yesterday. Is there anything else we should try before doing this?
Thank you in advance for your help. I apologize for the novel, but I figured I better be thorough.
Thanks,
Lisa

First, check that the cpd, ldb and pss files aren't included in source control.
With Robohelp closed, ensure that there isn't an ldb file in your project directory - this should only exist while Robohelp is open but sometimes gets left behind when Robohelp crashes.
If you any of the above existe in the specified locations, delete them (and the cpd on the c drive for good measure) and try to open the project again.
If you want to test the project outside source control, there is an additional step which you don't mention, so I'll put it here in case you didn't do it and want to try again. As well as deleting the .scc files, you also need to manually edit the xpj file. Open it in Notepad and delete everything between the <miscproperties> tags. (If you only see <miscproperties/> don't do anything to the file. This can cause other issues, but I won't go into them right now. It might be relevent to the 3rd project you mentioned depending on what 'doesn't work right' means.)
See how that goes,
Amber

ATV Post 2.3 update: i have exhausted all options....what to do next?

Similar Messages

Maybe you are looking for