ATV remotes down button doesn't work

I have three ATVs. The down button will not work when I try to use the remotes on any TV. My ATVs have been bricked as a result since I can't set up remote app to work on any of them.

Yes, restore the iPhone with current iTunes on computer. If still problem after that, make Genius reservation or Service arrangement and take or send to Apple for resolution under Warranty.

Similar Messages

  • Volume down button doesn't work

    I am having problems with my Volume down button.  I've had the 5 for 3 weeks and it worked for the first 2 weeks.  I can only get the volume down with the earbuds volume control or on the screen if its an option.  I have reset my phone several times and I have the most updated IOS and it still doesn't work.
    Any one else haveing the same issue or have any solutions for me.  I guess next I will try to restore the phone.... just really didn't want to have to go that route, but it may be necessary so I can at least try all my options.

    Yes, restore the iPhone with current iTunes on computer. If still problem after that, make Genius reservation or Service arrangement and take or send to Apple for resolution under Warranty.

  • The remote down button only sometimes works

    More often than not the down button on the remote wont work even though it's communicating with the box as it clicks and light flashes. Any ideas?

    buttons are mechanical microswitches which cause an electrical connection detecting it being pressed
    if metal plastic or become defect and breaks or if dirt get in to cause the mechanical connection not happen or only happen periodic
    you will experience what you experience, you most likely cure would be to buy a new remote, use an ios device with remote app or give it a go trying to clean  / repair the button yourself

  • HT4528 My volume down button doesn't work on my iPhone 5

    Just yesterday my volume down button stopped working. Did a reset on the phone and no fix. Any suggestions without having to go to the support desk?

    Hi Gogettem,
    Depending on what 'reset' you have done there may be other options.
    It will also depend on what you mean by stopped working.  If you mean that the button itself is stuck in then it is a hardware issue and needs replacement.  If you mean that it still pushes like normal but it won't change for you or won't give you any indication of changing then it's possible the below solution can work.
    First make sure you backup your iPhone to either iCloud or iTunes.
    Then use iTunes and while the iPhone is plugged in click on Restore iPhone from the summary page.  When the restore finishes, the important part is to restore as 'new' first and do NOT restore from backup.
    When you restore as 'new' you should test it.  If it still does not work then you need a replacement.
    John

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • My iPod 5 shut down and hasn't turned back on (this isn't the first time it happened) I've read to put it in recovery mode but my home button doesn't work, how can I fix it?

    ipod 5, had it for about 2-3 years, constantly shuts downs for about 12 hours but this time it hasn't turned on for a whole day, and my home button doesn't work which occurred a long time ago.

    Try this previous discussion:
    Turn on without Home/Power Button

  • HT1386 If my lock button doesn't work what can i do to shut down the phone?

    If My Lock Button Doesn't Work What Can I Do To Shut Down The Phone?

    More than likely a hardware problem.
    Make an appointment at an Apple Store if there is one nearby to confirm.

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • Can't Add Credit Card (submit button doesn't work)

    Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
    The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
    If it helps, I have the Palm Pre, I'm with O2 (UK).
    Can anyone help?
    Post relates to: Pre p100ueu (O2)

    This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

  • My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

    My home button doesn't work the first time I press it, but the second time.  This is very annoying.  Why is it doing this?

    - Try a reset. It cures many ills and nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -If a hardware problem see:
    fix for Home button

  • USB mouse button doesn't work on MacBook Unibody

    Since the trackpad was not working, we have to use a USB mouse to navigate. After a few minutes, the mouse left and right button doesn't work. I can move the pointer around the screen and use the keyboard.
    Thoughts

    The same problem happens with a Bluetooth apple mouse. You can scroll up, down and use the secondary (the right click) The problem normally developes after the MacBook has been running for a while and gets hot underneath.

  • I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

  • Back Button Doesn't Work on Some Websites

    How come my Back Button Doesn't Work on Some Websites? It just keeps redisplaying the same page over and over. Example:
    http://abclocal.go.com/wabc/front

    Back button behaviour can be pretty wierd. I usually use the keyboard combination, but for some reason it doesn't work on PDF's and I have to end up using the graphical back button.
    There are some websites out there that for some reason or another break the Back button's behaviour. Sometimes I have to hold down the mouse button to get the back button menu in order to work around that problem.
    In another case there was this page in Amazon that wouldn't allow me to go back to. Everytime I went to that page the browser to automatically kick me to the next page. I had to disable javascript to work around that problem.

Maybe you are looking for

  • Can I import tables, etc. created elsewhere into my mail messages?

    Here's what I'd like to do. I want to create some simple lists in Numbers or Pages in the form of a table. I would then like to import that into the message body of a message in Mail. I've tried to cut and paste, but that just ends up with a jarbled

  • How to find out and locate the top 100 max elements from a 4D array

    I try to find out the 100 maximum elements in a 4D array and then I want to put the result in a 2D array, Which should show me the locations of the elements and the values of those elements ==================== =Labview 7.0 & 8.0 & 8.5= =============

  • Regenerating Proxies - list view hangs client

    Just wondering if anyone else has come up against this one? If in the Asset window in the list view, and I attempt to regenerate proxies on a clip, the client freezes. I have to force-quit the client. Upon restarting the client and inspecting the Sea

  • Date filter in preview

    Hi there, Can anyone help me to see the error of my ways with date filters when using Preview and Designer to create reports. If I create a Excel 2013 workbook with date filter on Power View they appear as they do in Excel and the current version of

  • Lotus Notes menu bar issue

    Hi, Although I'm able to start Lotus Notes on OS 10.8 (after installing the Java bundle of OS X), the menu bar is completely unresponsive (but I actually do see LN menu bar items) : I really don't understand what's going on.. Lotus Notes 8.5.2 for Ma