ATV sync speed super stupid slow.

How quickly does it take you to sync one 45 minute TV show from your ATV to your computer? Mine takes me about 45 minutes. Is this normal? If not, how can i speed this up? I have a wireless Linksys router that hasn't been slow transferring files from my MBP to my G5, or any other capacity. If it is the ATV, why does the sync speed blow?

Well, it's new in that it's always been this way since i bought it new. It's just always seemed slow. It took about 2 hours to sync 8 shows from X-Files Season 2 last night. That works out to being about 2.5 GB, but that STILL seems super slow for this network. I have no issues streaming, so i wonder if this length is supposed to happen.
Now, just to be clear, i have a wireless Linksys router (WRT54G V8). I'm pretty savvy re: computers, but i'm a bit weak on networks, so it might not be optimized. I know sometimes my handheld phone can interfere with me streaming to my airport, but only when it is in use.
Otherwise, the router is hardwired to a Comcast modem. Thoughts?

Similar Messages

Dropbox uploading/syncing speeds are extremely slow

I've noticed that when I am in Windows my Dropbox uploading speeds are relatively fast but when I am using Arch Linux it uploads at a crawl. When I initially start the program it jumps up to a fast rate and then almost immediately starts to slide down to about 20 kbs.
I looked at my Dropbox settings and I made sure nothing is throttled including the download speeds. Does this have something to do with my specific network configuration in Arch Linux? Its definitely not my ISP since in Windows using the same connection Dropbox is really fast.

I could only find this on the internet, besides that I am out of ideas:
Preferences > Network > Bandwidth > Change Settings. Once there, change your Upload rate to "Don't limit", or if you're familiar with your network's upload bandwidth and want to exercise a little more control, pick an upload limit that you're comfortable with in the Limit to field.
Maybe it is related to your network configuration. Dropbox is working fine here.

ITouch Sync Speed to Vista Laptop

If I just connect my Itouch to my laptop and add new tunes via Itunes then the sync speed is very slow. However, if I also connect my old Ipod 30Gb video at the same time to any other USB port the Itouch sync speed increases dramatically! Much faster - almost as quick as the old Ipod. Is this an Itunes issue? It's a bit weird as the old Ipod syncs correctly on it's own. The Itouch has the latest - 3.0 - firmware.
Regards Graham

This ABSOLUTELY solved my problem... everyone having hang up problems check this out! It worked perfect. Thanks for the help man... Hope itunes have this fixed soon.

Slow Sync Speed

Hi there,
I've read many posts on this forum and believe that my sync speed is quite low. I did a theoretical max speed test for my line attenuation at Kitz.co.uk and it said that I should have a speed in excess of 19000kbps with an ip profile of 16000kbps. I have been using a dodgy micro filter that disconnected the broadband everytime I recieved a phone call however I have purchased a new one and my router is running flawlessly with no dropouts. The noise margin is constantly at 6db. I believe that this may have flagged my line to be faulty and thus resolved a slower sync speed to compensate.
I disconnected the broadband roughly 8 days ago after it had been connected for about 15 days expecting to sync at a higher speed but infact the sync speed dropped by several hundres kbps.
Is there any way that I can sync at a higher speed?
Thanks in advance

Ok I ran cat /proc/avalanche/avsar_modem_stats via telnet
AR7 DSL Modem Statistics:
[DSL Modem Stats]
US Connection Rate: 828 DS Connection Rate: 10544
DS Line Attenuation: 23 DS Margin: 5
US Line Attenuation: 13 US Margin: 9
US Payload : 3985202784 DS Payload: 3901859552
US Superframe Cnt : 42408111 DS Superframe Cnt: 42408111
US Transmit Power : 0 DS Transmit Power: 0
LOS errors: 0 SEF errors: 0
Errored Seconds: 3592 Severely Err Secs: 4
Frame mode: 0 Max Frame mode: 0
Trained Path: 1 US Peak Cell Rate: 1952
Trained Mode: 16 Selected Mode: 1
ATUC Vendor Code: 54535443 ATUC Revision: 3
Hybrid Selected: 1 Trellis: 1
Showtime Count: 1 DS Max Attainable Bit Rate: 11328 kbps
BitSwap: 1 US Max Attainable Bit Rate: 1284966 bps
Annex: AnxA psd_mask_qualifier: 0x0000
Power Management Status: L0 DS HLINSC: 0
US ACTPSD: -345 DS ACTPSD: -366
Total init. errors: 0 Total init. timeouts: 0
Showtime init. errors: 0 Showtime init. timeouts: 0
Last showtime init. errors: 0 Last showtime init. timeouts: 0
ATUC ghsVid: b5 00 54 53 54 43 05 10
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
ATUR ghsVid: b5 00 54 53 54 43 00 00
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
[Upstream (TX) Interleave path]
CRC: 351 FEC: 275203 NCD: 0
LCD: 0 HEC: 220
[Downstream (RX) Interleave path]
CRC: 5290 FEC: 67573629 NCD: 0
LCD: 0 HEC: 0
[Upstream (TX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0
[Downstream (RX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0
[ATM Stats]
[Upstream/TX]
Good Cell Cnt: 83025058
Idle Cell Cnt: 1324844211
Tx Packets Dropped Count: 0
Tx Bad Packets Count: 27
[Downstream/RX)]
Good Cell Cnt: 1244509050
Idle Cell Cnt: 3798720619
Bad Hec Cell Cnt: 84325
Overflow Dropped Cell Cnt: 0
Rx Packets Dropped Count: 0
Rx Bad Packets Count: 0
[SAR AAL5 Stats]
Tx PDU's: 27918363
Rx PDU's: 43978168
Tx Total Bytes: 2729375221
Rx Total Bytes: 2652108237
Tx Total Error Counts: 0
Rx Total Error Counts: 1569
[OAM Stats]
Near End F5 Loop Back Count: 0
Near End F4 Loop Back Count: 0
Far End F5 Loop Back Count: 0
Far End F4 Loop Back Count: 0
SAR OAM Ping Response Drop Count=0
I'm guessing that I am on ADSL as it says annex A? Does that mean that I can access any higher speeds as I'm not on ADSL2/+? or would forcing the modulation on the router help?
Update: It is set to trained mode 16 which is ADSL2+ What is going on here, I just restarted the router and it is now slower.
Thanks

Lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop.

lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop. stuck and cannot process any further.

Hi. Did you trigger a delete data via LR preferences ->Lightroom mobile.
I'm not seeing a catalog connected to your account.
Did you import originals via the connection-kit?
Thanks
Guido

Downloads slower than sync speed

I got connected a few weeks ago an happy with the sync speeds. 73 Down 19.9 Up The problem is no matter what I download I can't go over 55Mbit I have done a few speedtests and can't get over 55Mbit. Is there something wrong with my router or the line? I'm have a DSL N68U.
Here are my stats

TimCurtis wrote:
The problem seems to be with your profile - from the BT speed test.
DLM has set your sync speeds , although perhaps a little lower than might be expected, at 73k. From that you'd expect the profile to be at about the same figure, but yours is a lot lower which is the problem I'd guess.
Exactly what I was thinking. I was under the impression that with the current set up and under normal conditions ADSL2+ should set the downstream IP Profile to 88.2% of downstream sync and VDSL2 should set it to 96.8% of downstream sync.
Take my example. My line is capable of VDSL2 speeds of over 80Mbps. I'm on Infinity 1 so my downstream sync is capped at 40Mbps and my modem does sync at that. My downstream IP Profile is 38.72Mbps (exactly 96.8% of sync).
Kas,
Your stats show that your line is capable of 102.66Mbps. You are on Infinty 2 so your downstream sync has been capped at 80Mbps and in fact is currently synced at 73.46Mbps (possibly due to some slight noise on the line?).
However your downstream IP Profile is 57.71Mbps which is only 78.6% of sync. When downloading data via the internet using IP you will not get a speed greater than this limit. That explains your test results.
So the question that someone more knowledgeable might be able to answer is why the IP profile is set so low compared to sync speed?

Questions and answers on DLM, sync speed and real ...

I was confused about some DML details and posted on a BE forum (https://avatar.bethere.co.uk/forum/viewtopic.php?t=43542) and got what was to me an incredibly helpful response from Tom (drsox). I thought it would be of interest to some readers here so copy it below. Once again, many thanks Tom.
1) FTTC DLM applies only between the cabinet and the modem?
>> Yes, as there isn't any broadband / data signal going anywhere further down the line to the exchange if you are on FTTC!
2) What are the different parameters that apply on this hop? I know there is a current sync speed, a current snr, a target snr and an ip profile. Anything else?
>> The IP profile isn't really related to DLM, it just "follows" your sync rate. In the past the IP profile would take up to 3 days to "follow upwards", leaving you with a high sync and awful speeds! This has been changed now on 21cn and "RE-ppp"ing (rebooting the router) would force the IP Profile to update instantly.
DLM changes the SNR target. So where BE have hard coded / set SNR targets such as 3db, 6db, 9db, 12db etc.. They only change upon user request. BT use their DLM system where line instability or line error counts are collected and analysed, the SNR target and interleaving settings are then modified in increments to try and stabilise the line.
This image shows quite well how, over a 6 day period, BTs DLM noticed that my line fault was fixed. I didn't get the full speed back for a week.
3) Is the ip profile the same as the BRAS profile?
>>Yes
4) The DLM keeps statistics of errors etc to dynamically change the ip profile?
>> Changes the SNR target and interleaving for the line which will reduce the speed, and therefor the IP profile.
5) There is a general theory that the DLM is incapable of telling the difference between an error and a modem power cycle, so that power cycling can cause your profile to lower. Is that correct?
>> Yes, if you resync / power cycle your router multiple times in a day it is likely to try and "combat the line errors" and reduce your sync rate by increasing the SNR and / or interleaving on the line.
6) Can other connections and disconnections have the same effect? For example, if I reboot the router (where this is separate from the modem)? Or use the router interface to disconnect/reconnect the broadband?
>> PPP drops (router reboots while leaving the BT Openreach VDSL modem on and connected) won't affect DLM. The IP profile will match your sync rate upon reconnection of the PPP session.
7) If you have a low ip profile, does this mean that the sync is limited to the ip profile?
>> Other way around, if you have a low sync rate then the IP profile will match the sync rate. If you get an awful sync rate and the IP profile follows downwards, then you resync higher but the router "keeps the PPP session open" (which is possible if you resync quick enough) then your IP profile will stay low, even though the sync is high. Until you reboot your router or disconnect and reconnect the PPP session.
8) Can the sync rate change dynamically without a reconnection? If the ip profile gradually rises, will the cabinet force a resync to make sure the customer is actually getting the benefit of the higher ip profile, or must the user intervene with a modem resync?
>> See above - Sync can rise without affecting the IP Profile and the cabinet does not force a RE-PPP.
8) As I understand it, if the ip profile gets stupidly low for some reason, it can only be reset by BT wholesale? This will only be done after a visit to your home and a telephone call from the engineer to the BT wholesale central admin?
>> Mixed reports plus I don't think people understand the difference between sync speeds, line faults, the delay in DLM increasing sync after a fault.. I expect half the reports on the BT forum are not related to a stuck BRAS / IP profile. It is possible for the ISP or a BT engineer to reset the IP profile and possibly DLM training.
9) (8) This applies to all ISPs using BT Wholesale: some may be more willing to force this process to happen on behalf of their customers, but none can cirumvent it?
>> GEA providers (I believe) still have DLM but don't have BRAS / IP profiles unless they implement their own.
10) Who sets the snr? As I understand it, the customer has no direct control. Is this different for different ISPs?
>> Mixed information again, I believe that BT Wholesale give providers DLM override controls and SNR settings but none? (or few) ISPs use this system.
11) Real download/upload speeds are physically limited by the sync rate. They are also naturally limited by local limitations (such as wireless connections), server limitations, and congestion at various points along the route? Any more? The congestion along the route will vary bewteen ISPs as they use different routes with different capabilitues.
>> It is possible for BTs regional or local cabinet network to become congested. Supposedly the minimum speed you should achieve over the BT part of the network is 15mbps. ISPs such as Plusnet, BT etc.. then layer their own "discriminatory" traffic management on top of that (ie, slow down torrents etc.).
12) Real speeds are 'unnaturally' limited by throttling. This will also vary from ISP to ISP. Sky claims to have none, and BT none except for p2p. PlusNet and John Lewis have significant (but well explained)throttling. All the more expensive operators have none.
>> What you said
13) The ip profile affects the sync rate, and therefore actual speeds. Does the ip profile effect actual speeds in any other way?
>> Not quite right. The IP profile directly affects the speeds you can achieve but the sync rate affects the IP profile. The sync rate is determined by the stability and quality of your line and what DLM thinks it can cope with.
14) Many people (including AndrueC above) report real speeds from speedtests that are consistent and not close to the ip profile. These can't be explained by congestion (that would make them inconsistent). They can't be explained by server limitations, as they are consistent accross servers and the same servers give better speeds to other people. They can't be explained by local limitations, too many people claim sudden drops where the local conditions have not changed. They should not be able to be explained by throttling, as they as seen for many ISPs who do not throttle (I don't hold with the ISP lying theory here). What other factors are there that can explain these cases?
>> AndrueC and some other Sky customers have strange symptoms where speeds are around 20mbps rather than the full sync speed. The only logical explanation is either local cabinet congestion, contention between BT and the provider's network (not enough investment by the provider) or artificial traffic management on the providers side. It is also possible that the router that the customer has attached to their line is unsuitable for the higher speeds. For example an old ethernet router may only be able to cope with 20 or 30mbps! A friend of mine has a TP-Link ethernet router running Tomato on a BT 80mbps service but the TP-Link's CPU limitation causes his service to only perform at around 68mbps; he has a replacement router on order. (Obviously wifi will significantly reduce performance).
15) If you get a stupidly low ip profile, how long can you except it to take before it climbs to something more reasonable? (eg in my particular case, my profile is currently around 15Mb, and from BT service line tests should be around 58Mb). And the classic question, is it best to power cycle the modem (1) never, (2) occasionally (how often) or (3) never if at all possible? Mine did jump from 3.5Mb to 15Mb on one power cycle. Was that just coincidence?
>> My FTTC line took about 6 to 7 days to go from 40mbps to 80mbps after a line fault. It is possible that your 3.5mbps to 15mbps increase was the "re-ppp" affecting the BRAS profile and that your sync had slowly been increasing over time.

what a waste of money sending an engineer to "fix a fault" which does not exist. Precisely.
In my original BE post to which Tom so helpfully responded, I began: It seems to me that DLM is an excellent concept with a highly flawed implementation, both technically and administratively. I think that sending out an engineer to fix an obviously flawed profile is the main example of an adminastrative flaw. I understand (I can't remember source, maybe Tom again) that they are sometimes relaxing the requirement for a visit before reset.
Maybe the DLM system is too keen on stability vs speed. This will keep complaints down from many people: most users won't notice speed too much as long as it is reasonable, but will be upset if their Skype calls and browsing are being interrupted too often.
However, it does lead to complaints from people who notice the drops after an incidence (as in your thread that has drawn lots of interest), or who only get 50 instead of 60. The main technical flaw is that DLM can so easily be confused by drops from loss of power, too much modem recycling, etc, and then takes so long to recover.

Continual Drop in Sync Speed

I have been experiencing a continual drop on sync speed and thus actual line speed over the last few weeks. I had a HH4 replaced aftger teh last one died and since then the line speed seems to be getting slower and slower.
I am on DSLMax (good old ADSL) and normally sync around 8mb as am very close to the actual exchange - am now down to 6.4mb and am sure it will drop again.
Normal instructions from the phone support has been applied - reset hub etc.... and has not made a difference...
Can I ask one of the mod's to try and help out - see why the line is syncing lower than it normally does/has been for the last 3 years....
thanks
Pete

in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

What is sync speed limited by?

Assuming my line is all ok, what is sync speed limited by?
The reason i ask is im told my exchange and line is rated for 2 meg (which i was syncing at around 2.5), on sppedtest was getting 2 meg download...so all is looking well...but then randomly one saturday (about 2 weeks ago) i changed over a filter and disconnected the extension wiring, reset the home hub and synced at 3.9 meg, with a nice SNR of 5.9db. Obviously i was well impressed as my speed went up!
Why was this sync different? As im yet to get anywhere near that again?

neild7744 wrote:
Assuming my line is all ok, what is sync speed limited by?
It's essentially governed by the characteristics of the line. Even if the line is OK, it'll still have properties that could limit the possible speed to an extent. eg lines all attenuate the signal, even good lines.
There are other factors, "hard" caps for example can be imposed by the hardware, possibly due to the service you're buying. An "up to 8Mbps" service will never go faster than that, even if the line is capable.
The reason i ask is im told my exchange and line is rated for 2 meg (which i was syncing at around 2.5), on sppedtest was getting 2 meg download...so all is looking well...
Not really relevant to your question, but...while your line may well be "rated for 2 meg" the exchange will be capable of more than that. If you get anything less, it's due to one of the reasons above.
but then randomly one saturday (about 2 weeks ago) i changed over a filter and disconnected the extension wiring, reset the home hub and synced at 3.9 meg, with a nice SNR of 5.9db. Obviously i was well impressed as my speed went up!
Why was this sync different? As im yet to get anywhere near that again?
On the face of it, it sounds as though either the filter or the extension wiring is causing some noise/interference on the line, which was slowing things down.
If this behaviour is consistent and repeatable, it should be fairly easy to find and eliminate the cause, which may give a very worthwhile improvement to your speed.

Loss of sync speed (over 50%), openreach say line ...

Hi,
I hope someone can help!
For the last 24 months my sync speed has been a consistent and stable 7000+ so my BRAS profile was 6500.
Last weekend the connection dropped and now will not sync any faster than ~3000, so half the usual speed, well actually less because my BRAS is now 2500
I have checked all ADSL filters, connected the ADSL router directly to the master socket removing face place to disconnect the extension wiring, tried a different and known working router - another home hub and a Cisco, etc etc smae results.
The SNR on the line is unchanged at 35dB as previously be good for 7000+, so I can't understand why my sync is now 3000
At a sync of 3000 the SNR is 6dB (previously 7000 sync @ 6dB) which would suggest the line
is noiser than before, although no additional noise is heard on the voice line.
Openreach have been to visit - the line passed all of their tests. The openreach engineer also could not sync faster than ~3000.
He went to the exchange and redid the wiring to the DLSAM - no speed improvement.
He called me from the exchange and said that the DLSAM is "sending to me @ 7.2" - so I thought great, he's sorted it, then he told me no it would not be any better as "the line loses 1 meg for each km" .... so we entered a bit of dialogue about how the line could not be synced @7.x at the exchange end and 3.x at my end, about line sync, DMT tones etc etc I think I was going over his head! He then went on about maybe it's slower because there are now more users on the exchange - again I explained about how the contention actually works on the VC to the BT core, not by BT Wholesale decreasing sync speed on the DSLAM sync... again going over his head....
So basically he thinks it's fine as the line tested ok and I doubt I'll get any further change.
Now here is the strange thing -
...it was only after the call that I realised that he'd have no visibility of the sync speed on the DSLAM so when he said it's "sending to me at 7.2" he meant that he was plugged directly into the DSLAM port with his portable tester... Now he should be syncing @ 8Meg when connected directly to the DSLAM in the exchange, so it must be a fault on the DSLAM port / profile?
How do I go about getting BT wholesale to move me to a different port? Not only has my speed decreased but I get random re-syncs.
Please help!!! :-)
Cheers
Matt
PS provider is BT Total Broadband

Here's the other strange thing - I just reset the line to clear the stats, and made sure no other PCs were connected, i.e no significant volume of data being send/received, and in 5 minutes I have 160,000 FEC/Interleave errors - that's not right surely?
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:05:17
Downstream
3,392 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
5.9 dB / 22.0 dB
Line attenuation (Down/Up)
36.0 dB / 21.0 dB
Output power (Down/Up)
19.5 dBm / 11.8 dBm
Loss of Framing (Local)
64
Loss of Signal (Local)
11
Loss of Power (Local)
0
FEC Errors (Down/Up)
165234 / 2
CRC Errors (Down/Up)
217 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
685

I'm trying to download a movie from iTunes and it's stupid slow. I found the solution on the web before but can't find it again. Help!

Trying to download a iTunes movie on MacBook pro and it's stupid slow. I found a work through on the net before and it worked but can't find it now. Can someone help?

and now its down from 2 hours left to 46 min left, for some reason after 11pm the speeds change on itunes store and Apple tv for the past 3 days

File sync speed, reliability

To those who are already using CC, how is the speed and uptime of the file syncing service? I tried it free in the browser (I think they give 2 GB free) and the speed seemed glacially slow compared to services like DropBox. Also, my InDesign file synced but it doesn't show your linked images so everything is a low-res preview. Worse than a PDF. I'm trying to understand how I would ever use this to show something to a client.

Bill Bridgeforth wrote:
How is the speed and uptime of the file syncing service?
Hi Bill,
There is this:
http://status.creativecloud.com/
Judging by daily things like:
- Sync is down (completely, like the last few days)
- Some users may experience delays in working with their files.
- Some users may experience poor performance with some features of the service.
It seems pretty self evident this is not a viable option for professionals or those who need a reliable service.

Very high sync speed but very low ip profile!! Ple...

Hello everyone.
I have been a BT customer for almost 4 yrs now, with little or no issues during my time with them. Until now!
About 2 months ago i mustve signed upto the 20mb bb, as my 8mb bb, was working great but i though why not to the extra speed. So i sign up, and i get about 17.8mb sync rate, GREAT im thinking. SLowly, i did not realise my bb kept dropping out and eventually it lowered the sync rate everytime and eventually it halted at a 4.5mb sync. I am thinking how is this possible, i had 8mb bb and it used sync at 8.1mb without fail and speeds were excellent.
So i called them logged a fault, on 21/11/2010. I explained to them what had happened, they understood, tried to do a few things their end, however nothing change, so they booked in an engineer for 22/11/2010. he came and saw everyhting was fine (i wasnt home at the time, my mum was) so did really have a chance ot explain properly, but i told him what i could over the phone whil i was at work, and advised your premises seems to be fine, must be exchange. OK . Bt followed up asking is everything resolved,i said no changes, speed it still slow.They booked another engineer for 7/12/2010.
He came, i happed to stay home this time, and i explained to him what is happening. He checked everything, ran some line tests, and notices my line can hand 16mb but it seems to have capped. he got the cap removed and it synced at 17.9mb, im thinking AWESOME. He checked the mains, even replaced the socket, because i had a old battered one, which was excellent. He advised give it few hours the ip profile should reset itself, just keep monitoring it. He also advised if your bb line kept dropping, then it would keep lowering the sync rate and this has what had happened originally. He also advise if it starts happening again, connect the router directly the mains as it was currently on the extension socket down stairs. Once he left, as adivsed i monitored and i kept seeing it was dropping off and very very frequently like every 10 minutes. So i took his advised connected the router to the mains upstairs with a filter and it has not dropped since. this was 2 days, 2hrs 31mins ago.
However my ip profile has not changed. my sync rate has increased by more than 400% and has been very stable as i have notice with NO drop out.
I have been doing research, i have read any major sync increases the ip profile should reset within a few hrs, but as you can see it hasnt in more than 48hrs. I know i should wait maybe another 24hrs but i dont think it would make a difference. I phoned BT yday and they stated this the best your line can handle, i explained to them the history of speed and the recent incident, but told me nothing can be done and this the best i can get, they wud not understand my connection syncing how it should but the profile is stopping me from enjoying it!
I was wondering is there any way i can get this sorted, so i can enjoy really fast broadband?
Here are bb router (homehub 2.0 stats below and the speedtester results also):
ADSL line status
Connection Information
Line state
Connected
Connection time
2 days, 02:43:29
Downstream
17,832 Kbps
Upstream
1,131 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.6 dB / 5.8 dB
Line attenuation (Down/Up)
24.1 dB / 9.8 dB
Output power (Down/Up)
26.8 dBm / 1.7 dBm
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
3132 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 3132 Kbps
For your connection, the acceptable range of speedsis 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :17832 Kbps(DOWN-STREAM), 1131 Kbps(UP-STREAM)
IP Profile for your line is - 3500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 3.43:16.63:79.94 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
918 Kbps
0 Kbps
1131 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 918 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1131 Kbps
PLEASE PLEASE, can anyone help me in getting this sorted, i know what my line is capable and i know its faster than this.
Thank you in advance and let me know if any more information is required. THanks once again.

Similar situation here. I fitted a BT accelerator a month after the switch to ADSL2+ to get that last little bit of speed and instead it caused repeated dropouts. My IP profile got hammered and SNR set crazily high as a result.
Removed the accelerator and have a rock solid line again. That was 3 weeks ago and my profile is now at 12000 with SNR down to 12db. Hopefully will be back to where I was before the accelerator some time by the end of January.
I am using a Dlink 2460 so could force the SNR down with DMT software but am holding off at the moment as BT's profiling is so aggressive I don't want to give it any excuse to hammer my line again.

AME Batch Encoding stupid slow

This questions has been asked before here but there has not been any satisfactory answer to it yet as far as I can tell.
The issue is that some of us (not Harm, I know) see extremely slow export speeds using AME CS5 versus exporting directly out of Premiere.
In my case this is true regardless of what format I encode to.
All source files are AVCHD. Regardless if I try to batch encode to WMV, Blu Ray H.264, or MPEG2-DVD, export times are at least 3 times slower than if I just export directly out of PPro. This defeats the purpose of having a batch encoder in the first place.
This is the case on ALL My workstations, including this one:
1) Intel 980X; Win7 Pro; 24Gig Ram, 128Gb SSD boot + 450Gb VelRaptor + 640Gb WD Cav Black + 1TB Cav Black (to spread media, scratches,etc. etc. around); 1Gb NVIDIA GTX 285; nothing but production software, no antivirus or anything else. Mercury Playback Engine is always activated. No non-GPU accelerated effects are used.
I played around with the Windows task manager priority settings and that didn't help.
So if there is ANYONE who has a solution to this, that would be wonderful.
Thanks

That's correct...
Stan, though the AME engine handles the encoding work directly from PrPro, it is also now a standalone program that you can run without ever having to open PrPro (you can even import projects into it and select sequences from it, negating the need to open PrPro in the first place, once editing is complete).
Fuel, you say you expect more from a professional solution... can you give an example of an encoder that works faster? I'm not familiar with any other encoders out there that are 64-bit, work seemlessly with the editing program, and that can take advantage of CUDA support.
Though you've attempted to demonstrate that its not a resources issue, I would encourage you to visit www.ppbm5.com and download and run the benchmarking stuff and post your results. I've only seen two or three reports of such a drastic difference in speed between AME and PrPro (usually it's just a few percentage points) and every other time I've seen it, though the configured system sounded great, the benchmarking app showed they were suffering. The thread covering those other folks was sometime early last fall, I believe. You may be able to find it if you search for you.
I can guarantee you that if this product was truly "stupid slow" there would be a lot more folks out there complaining about it, and you wouldn't find the huge group of professionals that you have here using it on a daily basis. They'd be going out to find something faster. The fact that they're still using it tells me that it's got a lot going for it. Just something for you to think about...

I think my sync speed is stuck or been capped

Hi everyone, last week i had a full line reset because i started dropping in speed, from 16meg al the way down to 9meg, at the time time of the reset my sync speed went to 12.5meg, 24 hours later i was down to 9.494meg down and 1.12 up, im supposed to be on another 10day training but nothing has happened, meaning the hhb3 hasnt switched off or resynced since i dropped to 9.4meg, now after 5 days of constant connection there was still no change so i did a something to try and make my speed drop but nothing happened, it still synced at the exact same speed 9.4meg, im certainly not rate adaptive and i cant have any line issues or my speed would of dropped after constantly plugging in and out the socket and making it resync, so the only things i can come up with is that ive either been capped or the exchange has got stuck for some reason, ive even gone through my entire extension wiring and changed it to cat6, it made my line attenuation lower but no change in sync rate heres my speed test and hub stats.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days,
04:02:35
Downstream:
9.494 Mbps
Upstream:
1.129
Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex
A
Latency type:
Fast
Noise margin
(Down/Up):
10.4 dB / 5.9
dB
Line attenuation
(Down/Up):
29.3 dB / 13.3
dB
Output power
(Down/Up):
18.1 dBm / 12.0
dBm
FEC Events
(Down/Up):
0 / 0
CRC Events
(Down/Up):
207 / 76
Loss of Framing
(Local/Remote):
0 / 0
Loss of Signal
(Local/Remote):
0 / 0
Loss of Power
(Local/Remote):
0 / 0
HEC Events
(Down/Up):
727 / 45
Error Seconds
(Local/Remote):
233 / 89
FAQ
<script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed" ); // </script>
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
8135 Kbps
0 Kbps
21000 Kbps
Max Achievable Speed
Download speedachieved
during the test was - 8135 Kbps
For your connection, the acceptable
range of speeds is 4000-21000
Kbps.
Additional Information:
Your DSL Connection Rate
:9721 Kbps(DOWN-STREAM), 1155 Kbps(UP-STREAM)
IP Profile for
your line is - 8576 Kbps
2. Upstream
Test: -provides background information.
Upload Speed
897 Kbps
0 Kbps
1155 Kbps
Max Achievable Speed
>Upload speed
achieved during the test was - 897 Kbps
Additional
Information:
Upstream Rate IP profile on your line is - 1155
Kbps
We were unable to identify any
performance problem with your service at this time.
It is possible that any
problem you are currently, or had previously experienced may have been caused by
traffic congestion on the Internet or by the server you were accessing
responding slowly.
If you continue to encounter a problem with a specific
server, please contact the administrator of that server in the first
instance.
Please visit FAQ
section if you are unable To understand the test results.
Solved!
Go to Solution.

Thanks for your replys, believe it or not my line as been more stable, meaning alot less disconnects,infact very rare since i last had the snr reset, it auto changed to fast when mods manually reset the snr a month ago, i think it sounds like a joint or something, def not my internal wiring, its all brand new as of today and theres no change in sync so, the prob lies else where, i tried to tell bt before that theres some kind of fault between the pole and the exchange last time my speed dropped when i was on adsl max, it dropped to 300k i think, i rang up for a mac code because they wouldnt acknoweldge the fact and gottalked into adsl2+, everything went well untill 3 weeksago(around that time) i was up to 16meg sync, i posted it on here, after opening my big mouth my speed started to drop so i had a manuall snr reset, that solved it for a while, then i had that bad weather and it all screwed up, like i said previous, about 10-20mins before the reset my sync dropped to 1meg and line attenuation shot up to 65db, after the reset i had 12.5meg, 24 hours later i was down to 9meg, person on the other end of the phone at bt said my minimum sync should be around 12meg

ATV sync speed super stupid slow.

Similar Messages

Maybe you are looking for