ATV Update causing TV to switch to HDMI input when switched on

I have a Panasonic TX32LXD70 with my ATV connected using HDMI, the TV is set to go to the DVB-T tuner when switched on.
Before the "Take 2" update this worked fine but since upgrading when you turn the TV on it switches to ATV after about 10 seconds even if the ATV is in standby.
Has anyone seen this behaviour and managed to disable it ?
Thanks, Rob

sounds  more like a tv issue as hdmi does not native support changing the input sources of tvs

Similar Messages

  • ITunes switches to avg volume when switching speakers

    Anyone find it absurd that the volume is reverted to 70% or so after switching from an AirPort Express to Computer?
    Suppose you put in your headphones, turn the volume down and switch to Computer. What's more stupid than to assume that the user wants 70% volume after that?

    Just to add... I have iTunes configured to open on Space 2 for default. I just removed this configuration and it stopped doing it. Then I configured it again and it's doing it again.
    Don't really know what changed from yesterday, all I can think of is the iTunes update I did.
    Going to remove the configuration until I get and update that may address this issue.

  • Toshiba 32TL838: video flickering after fw upgrade in menus, using HDMI input

    Hi,
    yesterday I upgraded my 32TL838's firmware to version 6.4.0Y.1 / 94.6.27.8 using the network upgrade feature.
    After the upgrade I reset the TV to start over with factory settings.
    During the quick setup after the reset I noticed a very poor video quality. The whole image flickered, had a ghost effect and looked interlaced. The menus were almost unreadable.
    After completing the setup the TV switched to normal TV mode (DTV cable) and at least the tv picture looked quite normal. While cable TV input is selected, I can also open menus like before, they're displayed correctly.
    But as soon as I switch to HDMI input, the picture is getting nuts again, just as during the initial setup, including the TV's menu overlays. Sometimes it's getting stable for maybe 30 seconds but then it's crippled again.
    Some words about my setup: the TV uses only HDMI input 1 and the cable input, nothing else is connected.
    The HDMI input links to an Onkyo TX-SR508 AV receiver that is being fed by a Fantec 3DS4600 media player and BDP-S373 BluRay player.
    Because I expect the what-about-your-HDMI-cabling question, I exchanged the HDMI cables but as expected that did not help at all.
    At least I seem to be successful in working around the problem when using the Fantec player.
    Before I upgraded the firmware I was able to use the player with 1080p/60Hz and the player was setup accordingly.
    Now I switched to 1080p/50Hz and the video picture looks okay again. (However I did only a short test and as I said, sometimes_
    the picture is okay for a short time.)
    Unfortunately my BluRay player has no menu to change the frequency, so watching BluRay or the online services the player offers, is impossible.
    So what can I do now? A firmware downgrade (if that's possible) would be a quick temporary workaround I could accept. But in the medium term I expect Toshiba to restore the features they promoted and for which I paid.
    (Youtube stopped working with the old firmware and it looks as if 1080p/60Hz doesn't work anymore with the latest firmware.)
    Does anybody know a way to downgrade the firmware using an USB key? I already downloaded the previuos release tl838_853886.bin but I don't have a clou how (and if) it can be installed.
    Thanks for your hints
    belektro

    > Before I upgraded the firmware I was able to use the player with 1080p/60Hz and the player was setup accordingly.
    I think you mixed simply the PAL and NTCS settings.
    Usually all external players provide an option where you could choose between PAL and NTSC.
    NTSC standard is the common one for countries in South / North America and Japan,
    The PAL is used in Europe and some countries in Asia.
    Both PAL and NTCS support 24p (24 frames per second) but most output for PAL and NTSC use interlaced frames which means that:
    NTSC (60Hz) supports fps 60i or 30p
    PAL (50Hz) generally uses 50i or 25p;
    Probably the external player supports PAL settings and its set to 50Hz and therefore its play properly using the 1080/50Hz.

  • HDMI Constantly Auto-Switching

    Hi,
    I've had one of the newer style BT Youview boxes since around June, just recently when the box is in standby it constantly causes the TV to automatically switch to the HDMI input. It does this every few minutes and gets very annoying!
    Is anyone else experiencing this? I'm guessing it's down to a recent software update, i've tried a complete reboot but still the same.
    For information, the Youview box is plugged into a Yamaha AV amp via HDMI, the amp is then connected to the TV with HDMI. I don't have any problems with any other source also plugged into the amp (blu-ray player, xbox, etc). If i unplug the HDMI lead for the youview box the problem goes away, so definitely the youview box causing the problem. The AV amp displays an HDMI logo when the selected input is outputting an HDMI signal, when the youview box is in standby this logo is constantly flickering (when the youview box is powered on the HDMI logo is permanently lit). It looks like the youview box is intermitantly (every few seconds) outputting an HDMI signal when in standby, causing the TV to auto-switch to the HDMI input.
    Any help huch appreciated.
    Thanks,
    James

    The problem is the software update of 27 October. This has messed up HDMI switching leaving the connection trying to open HDMI all the time whether in stand by or in use mode. This fault may stop you using the other inputs on your TV and may lead to HDMI socket damage. (Engineer statement). I have been phoning useless BT since October and they do not know how to fix it. They know that the problem exists but keep fobbing me off with call backs that rarely happen. Useless

  • Os x 10.8.3 update caused graphic and general slowness

    on my mid2012 15inch macbook pro, which worsens when switching to the powerful graphic card. MRI shows no hardware malfunctions. any ideas what may cause this?

    thank you for your response.
    the process that has the highest cpu usage value is kernel_task and its around 5.0 most of the time.
    %user: 0.56
    %system: 0.81
    %idle: 98.63
    page outs: 0
    swap used: 15.1 mb
    reads in/sec:0
    writes out/sec: 0-11
    3/17/13 12:21:26.161 AM Mail[173]: unrecognized decoding of mime part (null)
    3/17/13 12:21:30.695 AM Mail[173]: unrecognized decoding of mime part (null)
    3/17/13 12:21:32.894 AM Mail[173]: unrecognized decoding of mime part (null)
    3/17/13 12:24:49.000 AM kernel[0]: memorystatus_thread: idle exiting pid 228 [cfprefsd]
    3/17/13 12:24:53.000 AM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    3/17/13 12:24:53.000 AM kernel[0]: macx_swapon SUCCESS
    3/17/13 12:25:13.000 AM kernel[0]: memorystatus_thread: idle exiting pid 593 [cfprefsd]
    3/17/13 12:25:35.483 AM mds[48]: (Normal) DiskStore: Disk store AC wakeup
    3/17/13 12:25:41.144 AM SubmitDiagInfo[596]: Launched to submit Diagnostics and Usage
    3/17/13 12:26:05.666 AM com.apple.backupd-helper[595]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.
    3/17/13 12:26:06.940 AM com.apple.security.pboxd[601]: Bug: 12D78: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    3/17/13 12:26:07.022 AM com.apple.security.pboxd[601]: CGSGetWindowTags: Invalid window 0x29f
    3/17/13 12:26:07.022 AM com.apple.security.pboxd[601]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
    3/17/13 12:26:07.874 AM com.apple.security.pboxd[601]: CGSCopyWindowColorSpace: Invalid window 0x29f
    3/17/13 12:26:07.958 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:07.958 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:07.960 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:07.973 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:07.975 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:07.976 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:08.007 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:08.007 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:08.019 AM com.apple.quicklook.satellite[591]: Unsupported: Unsupported Annotation Type
    3/17/13 12:26:17.823 AM com.apple.security.pboxd[601]: CGSReleaseWindow: Invalid window 671
    3/17/13 12:26:17.823 AM com.apple.security.pboxd[601]: _NXTermWindow: error releasing window (1000)
    3/17/13 12:26:18.843 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:26:18.877 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.03 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:11.854 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:12.052 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.20 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:13.062 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:13.272 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.21 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:14.283 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:14.478 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.20 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:15.485 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:15.688 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.20 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:16.698 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:16.878 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:27:17.887 AM WindowServer[77]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    3/17/13 12:27:18.072 AM WindowServer[77]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.19 seconds (server forcibly re-enabled them after 1.00 seconds)
    3/17/13 12:30:27.167 AM WindowServer[77]: Received display connect changed for display 0x4280140
    3/17/13 12:30:27.201 AM WindowServer[77]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280140 device: 0x10e927a10  isBackBuffered: 1 numComp: 3 numDisp: 3
    3/17/13 12:30:27.203 AM WindowServer[77]: CGXMuxAcknowledge: Posting glitchless acknowledge
    3/17/13 12:30:27.243 AM WindowServer[77]: Received display connect changed for display 0x4280140
    3/17/13 12:30:27.253 AM WindowServer[77]: Received display connect changed for display 0x3f003d
    3/17/13 12:30:27.253 AM WindowServer[77]: Received display connect changed for display 0x3f003e
    3/17/13 12:30:27.254 AM WindowServer[77]: Received display connect changed for display 0x3f003f
    3/17/13 12:30:31.000 AM kernel[0]: Sandbox: sandboxd(611) deny mach-lookup com.apple.coresymbolicationd
    3/17/13 12:30:36.032 AM sandboxd[611]: ([173]) Mail(173) deny mach-lookup com.apple.tsm.portname
    3/17/13 12:30:38.328 AM lsboxd[196]: ISGetIconFamilyFromStorage: seed mismatch for 22d40001, actual seed is c5b50ef1
              1   OSServices                          0x00007fff88dbd720 _ZL26ISGetIconFamilyFromStoragejPP17CIconStorageArrayPj + 140
              2   OSServices                          0x00007fff88dbd8c8 _ISReleaseStorageRefInternal + 33
              3   OSServices                          0x00007fff88dbd88e _ISReleaseStorageRefWithCache + 40
              4   OSServices                          0x00007fff88dbd7cb _ZL25ISReleaseImageRefInternalP16OpaqueISImageRefPPK9__CFArray + 72
              5   OSServices                          0x00007fff88dbd75e _ISReleaseImageRef + 49
              6   OSServices                          0x00007fff88db6b01 _ZN18SFLMutableListItem7DestroyEv + 23
              7   OSServices                          0x00007fff88db6acf _Z14SFLItemReleaseP16OpaqueSFLItemRef + 36
              8   OSServices                          0x00007fff88db8539 _ZN11SFLListBase7DestroyEv + 41
              9   OSServices                          0x00007fff88db84e6 _SFLReleaseSnapshot + 49
              10  lsboxd                              0x0000000105c05376 lsboxd + 9078
              11  libdispatch.dylib                   0x00007fff947740b6 _dispatch_client_callout + 8
              12  libdispatch.dylib                   0x00007fff9477629b _dispatch_source_invoke + 691
              13  libdispatch.dylib                   0x00007fff94775305 _dispatch_queue_invoke + 72
              14  libdispatch.dylib                   0x00007fff94775448 _dispatch_queue_drain + 180
              15  libdispatch.dylib                   0x00007fff947752f1 _dispatch_queue_invoke + 52
              16  libdispatch.dylib                   0x00007fff947751c3 _dispatch_worker_thread2 + 249
              17  libsystem_c.dylib                   0x00007fff8ad94d0b _pthread_wqthread + 404
              18  libsystem_c.dylib                   0x00007fff8ad7f1d1 start_wqthread + 13
    3/17/13 12:30:38.800 AM com.apple.security.pboxd[619]: Bug: 12D78: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    3/17/13 12:30:38.830 AM com.apple.security.pboxd[619]: CGSGetWindowTags: Invalid window 0x2c8
    3/17/13 12:30:38.830 AM com.apple.security.pboxd[619]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
    3/17/13 12:30:39.056 AM com.apple.security.pboxd[619]: CGSCopyWindowColorSpace: Invalid window 0x2c8
    3/17/13 12:31:00.000 AM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    3/17/13 12:31:00.000 AM kernel[0]: macx_swapoff SUCCESS
    3/17/13 12:31:32.000 AM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    3/17/13 12:31:33.000 AM kernel[0]: macx_swapoff SUCCESS
    3/17/13 12:31:59.024 AM WindowServer[77]: CGXSetWindowListTags: Modification of kCGSModalWindowTagBit (31) on a window 0x2d5 requiring rights kCGSWindowRightOwner by caller Preview
    3/17/13 12:31:59.025 AM Preview[613]: (null): CGSOrderPanelIfActive: window is not owned by the given connection
    3/17/13 12:31:59.025 AM WindowServer[77]: CGXSetWindowShadowParameters: Operation on a window 0x2d5 requiring rights kCGSWindowRightOwner by caller Preview
    3/17/13 12:31:59.037 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.037 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.037 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.056 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.056 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.056 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.057 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.071 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.071 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.071 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.072 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.088 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.088 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.089 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.089 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.104 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.105 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.105 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.105 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.121 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.122 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.122 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.122 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.138 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.138 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.138 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.139 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.154 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.154 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.155 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.155 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.171 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.171 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.172 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.172 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.188 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.188 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.188 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.189 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.205 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.205 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.205 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.205 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.221 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.222 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.222 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.222 AM WindowServer[77]: CGXSetWindowListAlpha: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.229 AM WindowServer[77]: CGXSetWindowShadowParameters: Operation on a window 0x2d5 requiring rights kCGSWindowRightOwner by caller Preview
    3/17/13 12:31:59.238 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.238 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.239 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:31:59.240 AM WindowServer[77]: CGXSetWindowTransform: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:31:59.241 AM com.apple.security.pboxd[619]: CGSSetWindowTransformAtPlacement: Failed
    3/17/13 12:31:59.241 AM com.apple.security.pboxd[619]: ERROR: CGSSetWindowTransformAtPlacement() returned 1001
    3/17/13 12:32:05.070 AM WindowServer[77]: CGXSetWindowListTags: Modification of kCGSKitVisibleTagBit (13) on a window 0x2d5 requiring rights kCGSWindowRightOwner by caller Preview
    3/17/13 12:32:05.070 AM Preview[613]: kCGErrorIllegalArgument: CGSSetHideOnDeact: error setting window tag bits
    3/17/13 12:32:05.070 AM WindowServer[77]: CGXSetWindowListTags: Modification of kCGSModalWindowTagBit (31) on a window 0x2d5 requiring rights kCGSWindowRightOwner by caller Preview
    3/17/13 12:32:05.071 AM Preview[613]: (null): CGSOrderPanelIfActive: window is not owned by the given connection
    3/17/13 12:32:05.095 AM WindowServer[77]: CGXOrderWindow: Operation on a window 0x2d5 requiring rights kCGSWindowRightPresenter by caller com.apple.security.pboxd
    3/17/13 12:32:05.095 AM com.apple.security.pboxd[619]: CGSOrderWindowList
    3/17/13 12:32:05.000 AM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    3/17/13 12:32:06.000 AM kernel[0]: macx_swapoff SUCCESS
    3/17/13 12:32:07.346 AM com.apple.security.pboxd[619]: CGSReleaseWindow: Invalid window 712
    3/17/13 12:32:07.347 AM com.apple.security.pboxd[619]: _NXTermWindow: error releasing window (1000)
    3/17/13 12:33:16.762 AM xpcd[190]: (null): have symlinks: (
    3/17/13 12:33:38.974 AM com.apple.backupd-helper[635]: Not starting scheduled Time Machine backup - time machine destination not resolvable.
    3/17/13 12:34:15.177 AM com.apple.Preview.TrustedBookmarksService[648]: Failure to de-serialize bookmark data file.
    3/17/13 12:34:22.385 AM com.apple.security.pboxd[619]: CGSGetWindowTags: Invalid window 0x2fc
    3/17/13 12:34:22.385 AM com.apple.security.pboxd[619]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
    3/17/13 12:34:22.585 AM com.apple.security.pboxd[619]: CGSCopyWindowColorSpace: Invalid window 0x2fc
    3/17/13 12:34:31.782 AM com.apple.security.pboxd[619]: CGSReleaseWindow: Invalid window 764
    3/17/13 12:34:31.782 AM com.apple.security.pboxd[619]: _NXTermWindow: error releasing window (1000)
    3/17/13 12:40:24.001 AM WindowServer[77]: CGXRegisterWindowWithSystemStatusBar: window 11 already registered
    3/17/13 12:40:29.170 AM WindowServer[77]: CGXRegisterWindowWithSystemStatusBar: window 11 already registered
    3/17/13 12:41:57.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=708[GoogleSoftwareUp] clearing CS_VALID
    3/17/13 12:43:40.255 AM WindowServer[77]: CGXRegisterWindowWithSystemStatusBar: window 11 already registered
    3/17/13 12:44:11.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1363473853
    3/17/13 12:44:22.321 AM com.apple.mtmd[47]: stat on /Users/ormeirnaggar/Library/Application Support/Google/Chrome/Default/History Index 2013-03-journal: No such file or directory
    3/17/13 12:44:22.321 AM com.apple.mtmd[47]: stat on /Users/ormeirnaggar/Library/Application Support/Google/Chrome/Default/History Index 2013-03-journal: No such file or directory
    3/17/13 12:45:33.387 AM com.apple.ShareKitHelper[637]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    3/17/13 12:45:33.388 AM com.apple.ShareKitHelper[637]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    3/17/13 12:45:33.388 AM com.apple.ShareKitHelper[637]: --warning: [ShareKit] Cancel UI for running services with Client PID: 709
    3/17/13 12:45:36.295 AM WindowServer[77]: CGXRegisterWindowWithSystemStatusBar: window 11 already registered
    3/17/13 12:48:43.293 AM lsboxd[196]: @AE relay 61657674:6f646f63
    3/17/13 12:52:55.465 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:52:55.465 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:52:55.465 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:54:09.677 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:54:09.677 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:54:09.677 AM apsd[69]: <APSConnectionNotificationQueue: 0x7f7f5b8594a0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.SocialPushAgent-user=501-env=production
    3/17/13 12:54:51.608 AM WindowServer[77]: CGXRegisterWindowWithSystemStatusBar: window 11 already registered

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • KERNEL Security Update Causing System Havoc

    MAY KERNEL PATCH CAUSES SYSTEM HAVOC
    We regularly update our patches, including recommended kernel security patches for Solaris 10.
    However, two days ago upon attempting to load the weekend Solaris 10 security patch (the latest as
    of this writing), the system indicated that the install had failed. After that, it was all downhill and as
    of today our main server is completely down.
    Being based on a ZFS file system didn't particularly help either as it appears that whatever problem
    was generated by the botched init5 installation of the Kernal Security patch got copied to the mirror
    disk, because the despite the failed installation the bootarchive was "updated" before shutdown
    and there didn't appear to be any way to restore from the mirror.
    What few errors I could view before even rebooting failed had to do with PCI and basic boot-time
    mounting. Currently, there is not even enough time for any text to appear on screen before the
    system reboots again (i.e. a reboot-loop).
    It appears there is no choice in a case such as this other than to restore from a zfs snapshot and I
    am not even sure that will work with no functioning kernel! I'll try it from fail-safe.
    Somehow I feel I am not alone this weekend as a frustrated system administrator. What has been
    most frustrating is that this was not an optional patch, but a kernel security patch which most of
    us would conscientiously add!
    Anybody been here, done this? Is there a "best procedure" in this case?
    Thanks for any help you can provide on restoring after a botched kernel update!
    Gunnar K. A. Njalsson
    The SPACEPOL Corporation

    We switched to Windows Server 2008 Enterprise this week, partially as a result of the problem above and not having
    a simple and straight-foward solution to recovering backup snapshots.
    In my opinion this is a real weakness with ZFS and the Solaris operating system. It should essentially be a no-brainer
    that there exist a simple file system-integrated solution that does not require all of the extra calculations, mirrors,
    commands and set-ups which are currently part of Solaris and ZFS. These are valuable tools, but in the case I
    mentioned above, the major problem was a false sense of security provided by all of the hype about ZFS and
    mirrors.
    It only took a botched official update to copy the errors to the mirror and thereby loose our data and make
    recovery a very intricate process which we did not have time to do. Windows Server provides us with a simple
    interface for backing up our data and server on a separate disk at times of our choosing and with a recovery
    or restore option that is intuitive and just as simple as backup.
    I love Solaris and Sun and share much of the philosophy of UNIX and related tools. However, in a security-focused and
    critical production environment such as ours, it's not a matter of my personal likes and dislikes; but a question of
    being able to get typical system administration tasks done simply, even if they have to be left to non-computer scientists
    at times. Solaris worked well for a year, but when the kernel became corrupted by an update, everything was lost.
    That's too much risk!

  • IPad iOS 6.1.2 update causing excessive battery drain

    I have noticed in other discussions that a number of iPhone users have experienced excessive battery drain after updating to iOS 6.1.2.
    I am now experiencing this problem in a big way after updating to iOS 6.1.2 on an iPad 3.   Prior to this update, my battery life was very good, dropping to only 70% to 80% at the end of a typical day of use.
    After the update, which was said to be to fix a previious Mail Exchange battery drain issue (one that I was not experiencing), my battery was dropping to 30% after a few hours.   It was literally like holding a bucket with a hole in the bottom and watching the water drain out.
    I noticed that my Usage time and Standby time were identical, even though the ipad had been in sleep mode much of the time.   This indicates to me that something about this patch is causing the iPad not to actually sleep when in sleep mode.
    The iPhone discussion forums point to a number of possible fixes, including uninstalling all emails and re-installing them all the way to a total erasure and reinstalation of everything.  This worked for some, but not for all victims of this problem.
    Until Apple recognizes this problem and sends out another update, one less painful solution that worked for me was to change all of my email accounts from Push to Fetch every 15 minutes.   This has stopped the problem for me, for now. so I wanted to share this in case anyone else is experiencing similar problems.
    If other community members have discovered other short term or long term fixes then please do post here.
    Apple, I await an update that will allow me to restore Push functionality, or instructions on what steps will work to properly restore full functionality (what to remove and reinstall etc).

    Just to confirm that I have the same problem.  I updated to iOS6.1.2 on Friday 1 March 2013, I have an iPad2.  And Saturday morning my iPad was 0% after having nodded off on a 78% full battery.  This has NEVER happened before, and has become a daily occurrence.  I have now amended my Mail to fetch and hope it works.

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

    OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
    The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
    Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
    Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
    I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
    Here's what I sent to Apple tech support:
    Guys/Gals (OS X Engineers):
    Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
    Please. Just do the right thing and fix the audio.
    There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
    And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
    Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
    Crikey!
    iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
    Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM   Mac OS X (10.4.9)   20 Years of Microsoft-Induced Grey Hair

    Libby,
    Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
    http://www.macmaps.com/backup.html
    But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
    I suggest starting a new thread here, where someone else could help you out better:
    http://discussions.apple.com/forum.jspa?forumID=752&start=0
    First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My ipod touch 4g just updates today on itunes and the update caused more trouble than good. My ipod will no longer show me the battery percentage in the top right hand corner and also I am not allowed to drag other applications to the bottom panel.

    My ipod touch 4g just updates today on itunes and the update caused more trouble than good for me. My ipod will no longer show me the battery percentage in the top right hand corner and I am not allowed to drag other applications to the bottom panel. Also my itunes doesn't allow "enable disk use" anymore. Can anyone help? My ipod now says that it's the 4.3.4 version

    - Unjailbroken iPod never showed % battery.  Just the icon.
    - Unjailbroken iPod Touches never had a disk mode.
    - What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back?

  • Recent windows 7 updates caused serious conflicts??

    I have two NI PCIe-1433 boards and the NI Max v5.4 installed. Recent win 7 (64 bit) automatic updates, within the last 10 days seemed to cause serious problems. Win 7 couldn't boot any more. Sometimes computer turns on and off by itself before the windows logo shows up. Sometimes it crashes before I can login.
    I did a fresh reinstallation of win 7. The same problem happened after some automatic updates. I can boot and use windows 7 if I unplug both NI cards. This makes me think the problem is in NI driver/card. I'm reporting it here to see if anybody experiences similar things.
    Earlier this year Win 7 automatic updates caused a problem with my Canon printer/scanner. Canon supplied scan software still does not work today.

    Hi Jeremy
    Thank you for responding. I do not know which update. I know it's due to some update(s) that happened recently.
    After I reinstalled the fresh Windows 7 (64 bit), I installed NI IMAQ software. I was able to use both boards to acquire images at that point. However Windows 7 kept updating itself. Later the same problem happened again.
    After unplugging both boards, I have been using the computer for 2 days without a problem. My computer's power supply is 650W. Does the boards require a lot of power?
    Jin

  • Adobe Reader 11.0.04 SCUP update causing SCCM 2007 SP2 R3 client to crash

    When we started deploying the 11.0.0.4 update for Adobe Reader provided for System Center Updates Publisher (SCUP), we started having failures with our Operating System Deployments. When the 11.0.0.4 update installs during the Install Software Updates (via WSUS) step, it stops the SCCM client, causing the SCCM client to crash and uninstall. When the SCCM client uninstalls, it breaks the OSD process and the image process fails. Our current .wim file has Adobe Reader 11.x patched to the 11.0.0.3 level. We are using SCUP 2011. Everything was working ok until this update came out. We even tried creating an SCCM software distribution package to deploy the update and it still crashes the SCCM client when installed that way. Has anyone seen similar issues in their SCCM environments? Does Adobe have a support number available to get help with these types of issues? Thanks.

    Try using the Adobe doc:  1   Introduction — Enterprise Administration Guide
    Also, you'll find installing and updating via bootstrapper is easier than AIP over the long haul.
    hth,
    Ben

Maybe you are looking for

  • Using Sony Bravia as display brightness issue

    I'm using a Mini as a media server, hooked up via HDMI to a recently purchased Sony Bravia TV. When watching video, the picture will automatically get brighter or darker -- but in the most annoying way possible. When watching a movie with a particula

  • Regarding ENTITY bean local interfaces

    Hi all, I have a component session bean - containing a number of service methods for creating, retrieving, updating & deleting instances of a related entity bean. This session bean is used by another session facade bean, which invokes the various ser

  • Problem with redeeming a gift card.

    I got a 15 dollar i-tunes gift card. I tried to enter the code, and it says that it is not recognized. I click to go to a page where it says send us the code and the Gift Card serial number. However, there is no code where the screen says it should b

  • Change Data type column - Performance of Index in Oracle 10g

    Hi, I have a table with too many rows (over 2000000 rows) . I have changed datatype (NUMBER to VARCHAR2) of an indexed column (the index is only for this column), using a temporay backup table: CREATE TABLE BKTABLE AS SELECT FIELD, ROWID AS IDROW FRO

  • Yet More ITunes 7 and Ipod Issues

    So, it seems like everyone else, I've been cursed with the [deleted] software that Apple released far prematurely. I've rolled back to 6.0.4, and now my ITunes functions properly. My Fifth-Generation Ipod, however, is down hard. It connects to the co