ATV V1 and V2 on same network. That should work, right?

ATV version 1 and version 2 can be used on the same network, right? assuming so. i see V1 selling on craigslist for 25-50 bones and figure i can outfit the rest of my TV's with them. anyone had issues? thanks!

3 1's and 3 2's here, no problems for me

Similar Messages

Using FaceTime on same network that a Mac and a iPad share

Just wondered if it's possible to use FaecTime on the same network that a MBP and iPad use?

It's possible to do this

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Ive just got a new iPhone4 and I am trying to get the App's ie games from my iPhone3 onto the 4 and retain the same levels that I have reached on the 3, The Apps have gone onto the 4 but its making me re-start everything from level 1?

Ive just got a new iPhone4 and I am trying to get the App's ie games from my iPhone3 onto the 4 and retain the same levels that I have reached on the 3,
The Apps have gone onto the 4 but its making me re-start everything from level 1?
Ive paid $$ for the games and then more $$ within the games via iTunes for in game purchases and desperatly want the games on the 4 with the levels that I have reached on the 3!
Can anyone help!! Please!!!! My Smurfs and Animals are starving Hahahaha

Mate, it's good to hear that you have gotten the iPhone 4 but sorry to burst your bubbles. Not all games can have the "saved" data ported over.
Normally when you save a game in iPhone, the memory used is in the flash memory of the device. Those that can be ported over, reason is due to the data being saved over the air and when you logged in on a new device, it recognises you via the userID.
Maybe you can try to backup your iPhone 3, and restore the file onto your iPhone 4. Not too sure if that would brick your phone though.

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hey NicolasZen,
Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Your iPhone may have one of these symptoms:
- iPhone displays "No Service" or "Searching" in an area of good coverage
- iPhone doesn't regain service when returning to an area of coverage
Resolution
If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
2. Turn iPhone off and then on again.
3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
5. Update your iPhone to the latest version of iOS.
6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
7. Restore the iPhone.
Thanks,
Matt M.

I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks!

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions?

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

Photo will not upload my pictures from the same camera that always worked in IPhoto. Says "could not be imported (may be unrecognized file type or files may not contain valid data). So how do I do it?

Photo will not upload new photos from same camera that always worked in IPhoto. Says "could not be uploaded )may be unrecognized file type or files may not contain valid data). Help!

Try image capture or a card reader - after the photos are safely on your Mac then use the camera's format command to reformat the memory card
LN

I have a gray globe and its says choose network what should i do

I have a globe showing and it says pick network what should i do

Hold down option key as you startup the computer.
When you see the the available startup disks, select Macintosh HD.
Reset PRAM. http://support.apple.com/kb/PH4405
Best.

Conflicts??? If connect ATV & Airport Express in the same network?

Since I installed AirPort Express 2 today, I couldn't use Iphone4s/ipad to airplay / mirror onto my Apple TV any more (only shows AirPort Base device).
Do they conflict with each other in the same network?
Anyone knows how to fix?
Thanks a lot!!
William

I must be missing something here. WDS is rather old and out-dated technology.
What other router is he using besides the 2n'd gen?

Homeshare worked on my PC until recent iTunes update. Cannot get homeshare to work on PC as previous. When I use my MacBook Pro on the same network, iTunes/AppleTV works just fine, so it has to be iTunes?

An interesting observation...when I have a MacBook Pro connected and select Computers on my AppleTV2, the name of the MacBook computer comes up on the screen and allows me to select it and view photos from my iTunes library. Orks perfectly. When my Windows 8 PC is connected, and I select Computers on my AppleTV, the name of the PC does NOT come up on the computer list, but instead the AppleTV immediately tries to download pictures from the PC itunes library. It runs for ~2 minutes then generates an error message saying it could not connect to the iTunes library and to make sure it is tunrned on, connect to the same network, and use the same blah, blah, blah. I know all the settigns on the network are correct because my MacBook works perfecty. So frustrating that my PC worked previously before the recent iTunes software update. What to do to fix it?

Hi Rickgal,
Thanks for visiting Apple Support Communities.
Based on the information, it does sound like this behavior is isolated to your PC. I recommend trying the troubleshooting steps in this article on your PC:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Start with turning Home Sharing off and on again, as explained in step 3:
Go to File > Home Sharing and choose Turn Off Home Sharing.
Choose File > Home Sharing > Turn On Home Sharing.
When prompted, enter the Apple ID you'd like to use.
Click Turn On Home Sharing, then Done.
Best Regards,
Jeremy

2 Computers on the same network isn't working anymore

Why can't 2 computers use the same airport? Is there a setting to change so that 2 different computers can use the same network. We were able to do it for year and then just recently something changed. Can anyone guild me? Thanks.

Open AirPort Utility - Click Manual Setup
Click the Internet icon
Look for the setting for Connection Sharing
Connection Sharing = Share a public IP address
Click Update to save any changes you have made

ATV V1 and V2 on same network. That should work, right?

Similar Messages

Maybe you are looking for