ATV wont set date and time

Apple TV wont set date and time eventhough I am connected to my wifi. Without date and time I cant do anything

My Apple TV just did the same thing, Ethernet stopped working and I had to connect with wireless to restablish network connectivity...

Similar Messages

TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

Is there any definitive info on this subject?

When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?

Passport restart when set date and time automatical austrian mountain

Hi guys sorry for my poor english. I was for four days in austrian mountain. There are a lot of areas without any connection (thats ok in mountain...). but why restartet my passport two counts per day? Only when it, set date and time automatical. After deactivat of this option my passport works normal without any restarts. My passport has follow infos: SQW100-1 softwareversion 10.3.1.1779.On 2000 meter was a mountain hut with an strong wireless repeater. Maybe it was the problem. Nobody on the hut has any problems with restarts... ok i was alone with my blackberry. nobody realy nobody on this mountain hut use a blackberry. Back from mountain i can set date and time automatical... and it works fine without problems. by the way i was the only one after four days with an active phone... Some IPads works on fourth day.... but how in hell go into a mountain with an IPad!? living area germany wireless carrier O2

When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?

Trying to setup my new ATV and it won't set date and time, and won't allow me to log in with my apple ID.

Trying to setup my new ATV and it won't set date and time, and won't allow me to log in with my apple ID to homeshare OR to test te network, which I know is correct since I changed it. I live in an apartment complex and the router is in my roommates room. ANY suggestions? I'm at the point where I may return this because it has been nothing but a hassle. I'm very annoyed and just want the product that I paid for to actually work.
The ABOUT section says Network Time: Skipped (reachable) and Activation: Failed (skipped)
I'm also using my MacBook Pro as the homesharing with iTunes up to date.

I had a similar issue wuth my new Apple TV. If you (or your roommate) are able to change the router firewall settings, do that first. I don't know the ports that you need, except that 123 is one of them (to set the time). Then restart the Apple TV. See if that will get you through the activation process. I actually ended up restoring mine to factory settings, but I'm not sure if that step was really necessary.
I understand your frustration, though. Getting the Apple TV to work was such a pain -- it almost feels like it is not really an Apple product.

All of a sudden my ATV came up with a message stating trying to set dat and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

Welcome to the Apple Community.
It's not related to any hacking.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router.
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Set date and time

I recently updated the apple tv .It was fine after the update although i did not use it as i was on my way out after the update.Days later when i put in on it cant seem to open itunes.reason being network time cannot be updated.i tried sighning out and now i cant sighn in.I tried reset that just brings me to a halt on screen that says activating setting date and time.Does any one know whats going on.Is the time server down ? Or something .Itune store sighn in works well in my pc ,ipad and other devices no problem.
And i tried putting off all firewalls in router but no luck.
Its connected wirelessly to the same router which normally works
Any idea guys

HI
I have tried everything possible such as router firewall settings changing DNS servers using WIFI and ETHERNET nothing works.Waited for more updates nothing so far.The only solution is to down grade the firmware through itunes .Using now 5.0.2 works like a charm .Don't wait any longer just search apple forum for procedure and follow.Use a mac better.It takes only 5 minutes for the process.All you need is a mac or windows pc,usb cable,the type that goes behind the apple tv,(I used a blackberry bold 9900 original cable),software known as ipsw.YOU DONT NEED TO POWER THE APPLE TV WHILE DOING THIS.IT WILL LIGHT THE LED FROM PC POWER.GO TO https://discussions.apple.com/thread/4419016?start=0&tstart=0 Read procedure written by cwlown .JUST MAKE SURE FOR MAC HOLD OPTION KEY DOWN THEN CLICK RESTORE .POINT TO THE DOWNLODED ipsw AND RUN.FOR WINDOWS HOLD SHIFT THEN CLICK RESTORE .POINT TO Ipsw download and run.There is no neen to unzip or extract ipsw.I had a problem when using windows xp ipsw did not show up as an upgradeable firmware therefore could not run it.I did not want to waste time and used the mac instead.I think renaming the ipsw in windows could have cleared the problem.Another thing is after the downgrade itunes will say that your APPLE TV is restored to its factory defaults don't worry the job is done ,check your software on the APPLE TV THROUGH your tv LOCATED at general then about.SETTING up the ATV first connect the wifi or lan cable select location first THEN sign in.

HT1551 Initial set up setting date and time just spins and spins..

Can't seem to get past the set up time and date on my Apple TV...it just spins and spins

Go to the Setting menu> General > Set Date&Time . It should display AUTO. Click on set Date and Time change it to MANUal and adjust the time accordingly.
As for the apple id that should be a different issue, my ATV frequenlty thinks it's in California's time zone and I have no trouble login in and out. Try going to the Apple ID site ifto you can't login there, you may have the wrong password.
Apple ID:https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Stuck on "setting date and time" page-tried hitting menu to reset network, but it stays on the setting date and time page. Any advice?

Anyone know how to fix this? It's reading the remote because the light is flashing when I click on many, but it's staying on the "setting date and time" page. Any workaround here would be great. Thanks peeps!

This is indication of a network issue... .ensure that the DNS settings are set to Automatic.
If the ATV is not responding to the remote, start by unplugging the device then plugging it back in. If it still fails to respond, restore via iTunes on the computer.

HT3180 Can't set date and time on apple tv

I cannot set date and time. Help!

It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

How do I set date and time on apple tv?

How do I set date and time on apple tv?

Fixed the same problem, STEPS
1. Reset your apple TV
2.It will again stuck on that setting, ignore it by press menu
3. Unplug ethernet wire
4. Try to connect with wifi, it should be work with wifi connection as mine.
5. Then you can switch back Ethernet wire after get fixed.
Thanks. Lemme know dude if it's work.

Setting date and time in java mail

I want to set date and time for the mail sent by my application.
So how to set date and time for my mail.

msg.setSentDate(new Date());Where msg is an instance of javax.mail.Message.

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

Is there a way to force time can only be set to "Set date and time automatically"?

I am using OS X 10.9 .5 , and here is what I want to do.
When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
Thanks in advance.

There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

How do I change the "Set Date and Time Automatically" server

Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

sig wrote:
The menu has a drop down. But if you know the address of another time server I would think you can type it in.
Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
charlie

Keychain problem and "Set date and time automatically"

Something very strange appened to me today. I spent a few hours to get it through.
All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
Sorry for my English (I'm from Italy).
Someone got the same issue?

That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
Would you mind double-checking the following setting, using the AirPort Admin Utility?
AirPort Tab - Base Station Options: Logging/NTP
- Set Date & Time Automatically: time.apple.com (checked)
Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router?

ATV wont set date and time

Similar Messages

Maybe you are looking for