Atv2 streams from Netflix @ 1/10th of speed of the other devices
ps3, ipad2, & desktop pc all pull around 9Mb/s [12Mb/s service] via cat5 AND/OR .n from AEBS.
The ATV2 pulls from .75-1.2Mb/s from Netflix, according to their tech support.
swapped out cat cables, rearranged which cable goes into which lan port on router, still the same thing. Called Uverse, they ran line tests, came out to house, nothing wrong (obviously if others are connecting ok).
Apple has offered to swap out the Atv2, just wondering if anyone has had this issue and solution. Netflix states that its not on their end. Other than this Atv2 works fine.
Will wait a week to update to new 4.3 F/W out today 1AUG2011.
All other devices current with F/W, and nothing is jailbroken etc...........
Any comments appreciated.
Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
if using a hub 4 locate these lines located in the hub logs
Lines should look like this
19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?
I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router. -
Every time I download an app on one of my apple devices, it automatically goes onto both of the other devices. How do I stop this from happening?
On the device that you don't want the apps to be downloaded on, go to Settings > iTunes & App Stores > Automatic Downloads. Once you turn that off, your problem will be fixed.
-
I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
I can download from iCloud to one iPod but not the other. It says downloaded but doesn't show up in music...
I'm not sure what you mean by the "music library" - are you looking in the Music app? Or the iTunes app (which is not the one to be looking in)?
-
I have the same songs showing up on 2 playlists on my Ipod. How do I remove the songs from one playlist and leave them on the other playlist?
Hi tmilbut,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to delete items from a playlist on an iPod.
iPod Nano User Guide - Remove items from a playlist - page 23
http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
Remove items from a playlist:
1 On the Home screen, tap Music > Playlists, then tap the playlist you want to edit.
2 Flick down, then tap Edit.
3 Tap next to the item you want to delete, then tap Delete when it appears on the right.
4 When you finish, tap Done.
Delete a playlist:
1 On the Home screen, tap Music > Playlists.
2 Flick down, then tap Edit.
3 Tap next to the playlist you want to delete, then tap Delete when it appears next to the playlist.
If you tapped the wrong playlist, tap the one you want to remove.
4 Tap Delete, or tap Cancel if you change your mind.
5 When you finish, flick up, then tap Done (or swipe right to return to the Home screen if you cancel).
Cheers,
- Judy -
I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices? I thought that was the point of iCloud. Any suggestions since iCloud doesn't seem to work?
It's a work computer so I wanted to save them to my iTunes so I can access from another computer. Should I go to a home computer and just Import for best results? If so how do I do this? Also, why would I be synched with another library and how do I find out what this is? Very new/green user here
-
I NEED TO SHARE MY LR CATALOGS FROM LAPTOP TO MAC AND EVEN IPAD WITH NO EXTERNAL DEVICES - I WOULD LIKE ANY EDIT I MAKE FROM ONE COMPUTER TO BE MADE ON THE OTHER - HOW DO I DO THIS ?? THANKS!!
All the info you do with your image files is stored in the Lightroom Catalog file. The Catalog file cannot be located on a network it must have a physical connection to the computer.
While the Catalog is in use a LOCK file will be temporarily placed alongside which prevents its use by any other device. -
i need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training from authorised center.how good it it to do prepare from unauthorised center and take exam in any country like australia ,US ?please help understand .
Hi Preeti,
please first understand the difference between a subject (your header) and its body line, please never write so long subject matter.
Now coming to your queries , what you thinks being at Australia or US is free of Cost. The first thing is that i don't understand your mission for taking Certifications, Are you a working proffesional because for more than 2 yrs. of working experience, you don't need any training , you can take direct examinations.
And if you are not a working professional, i don't thing taking any certification will serve any purpose in your job hunt, although it will enrich your Resume only, you will nothing get out of this from just taking a vertification
So, please tell us that you are a fresher or having real time working exposure in SAP SD module, then any one will guide you well. -
I am running 10.8 and setup airport extreme to run music from my imac to my receiver in the other room. When I open sound from system preferences, I don't see an external device to choose, other then internal speakers. Any ideas?
Airport Express (the small Airport device, which is the only one with an audio connection) works through Airtunes, which only works with iTunes. The computer won't send ALL system sound to the Airport. If you actually want to send sound outside of iTunes, use Airfoil.
Matt -
I have 3 devices all using the same iCloud account: iPhone 5, iPad 3, and MacBook Pro with Mt. Lion. I want to be able to delete an iMessage on one device and have it automatically deleted from the other devices automatically instead of having to delete the message on all 3 devices. Is this possible? I want it to sync up just like an email account would sync up. Thanks.
You got the gist of it - imessage and email accounts have different supporting "underline". Even some of the mail accounts (POP) do not have that capability. Neither does imessage. What I did is made sure that I receive my imessages to one device only. I do not know if it will work for you. Good luck.
-
TS2972 home sharing will work from computer to apple tv but not the other way?
home sharing will work from computer to apple tv but not the other way?
Home sharing is one thing, physically copying is another thing.
-
I have had an Apple TV for over a year. I use it mainly to stream programs from Netflix, and up until a few months ago, I had no poroblems. Now it has become impossbile to watch a Netflix program on my TV because the film freezes every couple of minutes, or less, and seems to be downloading. It starts again, but the same thing happens in a couple of mnutes more. I have tried pausing the film for a few minutes to let it download, and I have even started a film, and then paused it, half an hour before starting to watch it, hoping that this would allow the entire film, or most of it, to download, but it hasn't helped. I don't have this problem when I download directly from Netflix onto my laptop, but then I don't need Apple TV. Of course, I'd rather watch films on my TV than on my laptop. Any suggestions other than buying a new Apple TV after just over a year?
I also found the following post about a TV interfering with wireless networking:
https://discussions.apple.com/message/17354146#17354146
When I was searching I also found similar problems with screen brightness affecting wireless networking in iPads and MacBooks. So it seems like screen backlighting can generate wireless interference. The joy of technology. -
Mac Pro won't stream from Netflix
Mac Pro 2 x 3 GHz Dual-Core Intel Xeon, 9 Gb RAM, OS X 10.6.7. Used to be able to stream Netflix Instant Watch movies up to about a year ago, when I got an iPad and switched to watching Netflix stuff on that. But yesterday I tried it on the Mac Pro again and a message informed me "Our apologies -- instant watching is not supported on your operating system." I use Safari 5.0.5 and meet all the other Netflix requirements for streaming on a Mac.
On a separate internal hard drive of my Mac Pro, I have OS x 10.5.8 and Safari 5.0.5, and am still able to stream Netflix movies fine if I boot up in that. But I can't steam them when booted into 10.6.7 for some reason. Any ideas?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Hi I want to know how to create Purchase return so that the Purchase return account has an effect. We have created a AP Credit Memo...but it is not affecting the Purchase return account Regards Farheen
-
IMovie error when trying to export-file open with write privilege
When trying to export an iMovie, after about two hours, I got a message - error - a file is open with write privilege. Any idea what might be causing this error or what the error message means?
-
Can I buy iPhone 5 unlocked contract-free in US
Is iPhone 5 unlocked contract-free available in the store? If YES : how much it costs If NO : When it will be available.
-
Assign value to the DFF fields in the OA Page
Hi, I have a requirement to copy customer address defined at the customer level to the contact while creating customer contact in Sales User. The page has the address fields like - Address1, Address2, county, state etc. when I open the page in JDev,
-
My 8g iPhone is having problems: 1) the slide bar does not respond to my touch and will not slide to open. This is usually overcome by pressing the home button several times to get to the home screen. 2) the bigger problem is that the browser won't s