(ATV2 tv) can't access rented show from my favorites.

(ATV2 tv) can't access rented show from my favorites. Error is "The iTunes store is currently unavailable. Try again Later." I have updated and rebooted ATV, as well as my router a number of times. I don't want to rent it again, any ideas?

Thank you! Knowing someone else had the issue helped me fix it on my end!
I'm guessing it's a server issue of some sorts.. maybe just some accounts. It's not the first time favorites has been broken, last time it was broken I just couldn't enter the favorites area. The spinny thing just appeared forever.
My fix: though nothing in favorites works (every time I press select on the show I want it displays the same error as you get), from the main menu with the TV shows menu open, but favorites not yet entered, press the up button and it'll move the cursor to the first image in the menu of rentals at the top of the screen. Easier anyway! Didn't know you could!
On top of that, though I'm now unable to rent via favorites itself, I can do so via the "top tv rentals" thing.
Hope this helps and they fix it soon! :/

Similar Messages

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

I can not access Itunes Store from my computer. When I run the dianostic I get a red light that says "Secure Link to the Itunes Store Failed".

I can not access Itunes Store from my computer.
When I run the diagnostic tool for network connectivity, my network connects but I get a Red light that says "SECURE LINK TO THE ITUNES STORE FAILED".
Can anyone help me on this problem?

ITunes won't connect all I get is the "accessing iTunes store......". With the bar scrolling but no connection.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Can not access iCloud drive from iPad

can not access iCloud drive from iPad

iOS 8/8.1 does not have an iCloud Drive app (that works like OneDrive or Dropbox, etc..). Instead you have to open the application first (ie. Numbers) which will show you your iCloud drive files that you can open and work with.
This is the exact reason I am currently migrating all of my documents BACK to OneDrive. If I don't know what the filetype is of a file that I am looking to open (ie. Word document or PDF) then I'm screwed. At least with OneDrive (or DropBox, or Google Drive, etc.) I can browse my files from my mobile device.

I would like to access an old Time machine back up from a Core 2 Duo Macbook, but no longer have a Mac. Can I access the backup from a cheaper old ibook, or would I need a Macbook. Is the OS important?

I would like to access an old Time machine back up from a Core 2 Duo Macbook, but no longer have a Mac. I am going to buy a used machien to acess this. Can I access the backup from a cheaper old ibook, or would I need a Macbook. Is the OS important?

right click on the folder that shows with the red negative sign, and select to "get info". In the long skinny window that appears, look in the "sharing and permissions" section. In the "name" column, you should see your current user name. Ensure the "privilege" is set to Read and Write. If your user name is not in the name column, click the + sign, and add it, ensuring the privileges are set to Read and Write

Can't access recent Emails from mail tile in window 8.1

Can't access recent Emails from mail tile in window 8.1. Everything working fine until yesterday. I can get my Emails by going to google Chrome and accessing my gmail but I like just hitting the mail tile in 8.1. Also is the start
of something bad onmy computer?

Hi,
Could you please explain a bit for the " mail tile " mentioned here?
If you mean to access e-mail with the Mail APP, and have issues when using it, we may first take a try with the
Apps troubleshooter.
More information regarding mail APP troubleshooting, please check the below TechNet Wiki:
Troubleshooting the Modern Mail App on Windows 8
Troubleshoot problems with an app
If any further help needed, please feel free to update here.
Best regards
Michael Shao
TechNet Community Support

How can I buy tv shows from Jordanian iTunes store?

how can I buy tv shows from Jordanian iTunes store?
I have used a local visa card and I cannot buy movies or tv shows on Apple TV as I get a message saying that I have to buy them from the Jordanian iTunes store!!

It does seem a bit off that the rules are that stringent....
This is not a decision made by Apple.
It is made by the copyright holding music or television companies and is part of the contract with the recording artist or program producer. They make the decision as to what territories are distributed to and what territories are left out.

How can I access xml document from javascript whithin a JSP page

how can I access xml document from javascript whithin a JSP page?
I have a JSP that receives an XML document from a JavaBean, so I can access it within the entire JSP, but I need to access it from the javascript inside the JSP... and I have no idea how i can do this.
Thanks in advance!

The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

Can't access internal network from VPN using PIX 506E

Hello,
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. My running configuration is as follows:
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password N/JZnmeC2l5j3YTN encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname SwantonFw2
domain-name *****.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list allow_ping permit icmp any any echo-reply
access-list allow_ping permit icmp any any unreachable
access-list allow_ping permit icmp any any time-exceeded
access-list INSIDE-IN permit tcp interface inside interface outside
access-list INSIDE-IN permit udp any any eq domain
access-list INSIDE-IN permit tcp any any eq www
access-list INSIDE-IN permit tcp any any eq ftp
access-list INSIDE-IN permit icmp any any echo
access-list INSIDE-IN permit tcp any any eq https
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
access-list swanton_splitTunnelAcl permit ip any any
access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
no pager
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.150 255.255.255.0
ip address inside 192.168.0.35 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN_Pool 192.168.240.1-192.168.240.254
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.1.26 255.255.255.255 outside
pdm location 192.168.240.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
access-group INSIDE-IN in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup swanton address-pool VPN_Pool
vpngroup swanton dns-server 192.168.1.1
vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton idle-time 1800
vpngroup swanton password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.36-192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username scott password hwDnqhIenLiwIr9B encrypted privilege 15
username norm password ET3skotcnISwb3MV encrypted privilege 2
username tarmbrecht password Zre8euXN6HxXaSdE encrypted privilege 2
username jlillevik password 9JMTvNZm3dLhQM/W encrypted privilege 2
username ruralogic password 49ikl05C8VE6k1jG encrypted privilege 15
username bzeiter password 1XjpdpkwnSENzfQ0 encrypted privilege 2
username mwalla password l5frk9obrNMGOiOD encrypted privilege 2
username heavyfab1 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab3 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab2 password 6.yy0ys7BifWsa9k encrypted privilege 2
username djet password wj13fSF4BPQzUzB8 encrypted privilege 2
username cmorgan password y/NeUfNKehh/Vzj6 encrypted privilege 2
username cmayfield password Pe/felGx7VQ3I7ls encrypted privilege 2
username jeffg password zQEQceRITRrO4wJa encrypted privilege 2
terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated

Bj,
Are you trying to access network resources behind the inside interface?
ip address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1- access-list SWANTON_VPN_SPLIT permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
2- no vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton split-tunnel SWANTON_VPN_SPLIT
3- no access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
4- isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please rate any helpful posts

Can't access work IMAP from home

Hi
We're running mail service (IMAP) on OS X Server 10.3.9 at the office. Everything works fine when I'm on the network locally - I can send and receive external emails etc.
However, I can't access the server from home using either the domain name or IP address. I used to be able to but we've recently changed ISP & router and I'm not sure if this has affected it. I assume the MX records for the domain are fine since we can send and receive.
I'm not really an IT admin-type guy (it's just kinda become my responsibility) so I don't fully understand DNS, local domains etc.
If anybody has any pointers, I'd really appreciate it.
Thanks
Ian
Mac OS X (10.3.9)
PowerBook G4 1.5 Mac OS X (10.4.8)
Mac OS X (10.4.8)

Everything works fine when I'm on the network locally - I can send and receive external emails etc.
However, I can't access the server from home using either the domain name or IP address. I used to be able to but we've recently changed ISP & router and I'm not sure if this has affected it.
DNS Basics: the DNS server basically resolves a 'name' to an IP address. E.g. mail.mydomain.com to the IP address of the mailserver.
When you are inside the local network (LAN), your computers probably find the server using a local IP address. When you are outside the LAN, then your computer will find it EITHER by using the public IP address of your firewall OR using a name which will resolve to the same.
Since it worked before you changed ISPs, I'm guessing that you had it set explicitly to the WAN IP address. This will have changed with the change of ISP.
Easiest way to fix this is to use the same host name as you MX record is set to. So if your MX record is mail.mydomain.com then use this as it is obviously resolving to the IP address of your mail server (or more exactly, the IP address of your firewall).
NEXT, since your router has also changed (and I presume this is also your firewall) then you need to ensure that the imap port required (143) is open and port-forwarding to the internal IP address of the mail server.
-david
Server 10.4.8

Since installing Photoshop CC I can't access Camera Raw from the program Bridge.

Since installing Photoshop CC I can't access Camera Raw from the program Bridge. When I try, I get a message that says, "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature." Is Photoshop CC a qualifying product? It has been opened a number of times, but it doesn't solve this problem.

I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Can't access my desktop from the sidebar. Keeps going to terminal

can't access my desktop from the sidebar. Keeps opening in terminal window. Also when trying to save from an email, I cannot save to desktop

If you haven't already restart and test, if no joy then Repair Disk Permissions in Disk Utility. Open Disk Utilties (Applications - Utilities - Disk Utility) select the internal HD, select the First Aid tab and then click Repair Disk Permissions. To be safe run Repair Disk Permissions 2x.

(ATV2 tv) can't access rented show from my favorites.

Similar Messages

Maybe you are looking for