AU Lab will not send output to Focusrite Saffire 6 USB - Suggestions?

Macbook Air 13" (2012)
AU Lab will not route audio to Saffire 6. I'm creating an EQ for the overall audio on my Mac - if I set to output through internal speakers, it works perfectly - but if output is set to Saffire 6, AU Lab won't even recognise an input from Soundflower, let alone send an output to the interface.
Ideas?

Hey all, first I am SOOO glad I found this as I was going nuts trying to figure this out.. The post from addressler is totally correct, however I just wanted to chime in that if you are using ARC 2 room correction plugin within AU Lab, you should not forget to change your DAW input/output to "Soundflower (2ch)" as well so your mixes are going through the plugin, but bouncing of your audio is not being affected. I am using AU Lab to listen to music, produce music in my DAW and correct my room acoustics so this is important.
Additionally, and perhaps this is an anomaly on my system, but I noticed that I had duplicate (slightly delayed) audio playing causing some phasing issues on playback when using soundflower. I fixed this by leaving all routing the same, but simply quitting Soundflower. I know it sounds crazy, but I quit soundflower and still have my Preferences audio ouput, Au Lab input, and DAW (Logic Pro 9) input AND output set to Soundflower (2 ch) and it works like a charm.
I have AU Lab set to open on startup. Only thing to remember is that when it comes time to track or use your interface to record into the DAW, you must switch the DAW input/output to Saffire (or interface of choice), otherwise your interface is merely your playback device (Soundcard) and does not offer any preamp input options.
Hope this helps someone!

Similar Messages

TS2755 My emails will not send on my iphone 5C? Any suggestions

My emails will not send on my iphone 5C? Anyone have a correction for that?

Hey pamela9801,
I would first try out these troubleshooting steps:
Try these basic troubleshooting steps first
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:
Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Then, if that doesn't work, I would continue along with the rest of the suggestions in the following article:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Welcome to Apple Support Communities!
Cheers,
Delgadoh

SpeedGrade 2014.2 will not send output via BlackMagic Intensity Pro HDMI to my external monitor.

I occasionally can get a few pixels near the left side of the monitor, and 2014.1 would display the lower half of the frame, but now, after the 2014.2 update, I can't even get that much. Premiere is monitoring perfectly. Any suggestions welcome!

I am having the same problem. I am on Speedgrade version 2014.1 currently and it won't output to either of the monitors I've tried. Both are connected via HDMI.
One is a 22' ASUS monitor, which reads "Out of Range" when I connect it to my blackmagic Intensity Pro output. From what I've read this has to do with the frame size coming out of SP being too large for the monitor.
Next I tried to output to a 50' HD TV. I don't get the "Out of Range" message on this one, instead the monitor is black with an occasional flicker when I hover over a clip or an option in Speedgrade. By flicker I mean the screen flashes a garbled purple mess for less than a second, then goes black again.
I'm running the Creative Cloud Suite on a Mid 2012 Mac Desktop with a 2 x 2.66 GHz 6-Core Intel Xeon processor, 52GB of RAM, and ATI Radeon HD 5770 1024 MB graphics card. OSX version 10.8.5.
Been waiting for this capability for a while, any advice would be much appreciated.
Thanks!
Josh

LR 4.2 will not send D600 NEF files to CS5 or CS6

LR 4.2 will not send D600 NEF files to CS5 or CS6 whenever I right click on the image and chose "Edit In"...is this a glitch that is to be fixed in the upcoming LR upgrade or is this something I can fix now? Converting to a jpeg or dng before I can export to CS is a pain in the rumpus ;o)

Try updating to Lightroom 4.3 RC http://labs.adobe.com/downloads/lightroom4-3.html
And Camera Raw 7.3 RC http://labs.adobe.com/downloads/cameraraw7-3.html
They are release candidates, which means they're undergoing final testing but they're much more stable than a beta version. They have full support for the D600, so you should find the rendering looks better too.

Email will not send

Email will not send , but I can receive ?

Are you getting any errors when you try to send? Or does it just get stuck in your outbox sending? Simple thing to do is reset your iPad by holding down the home and power button until you see the silver apple then just let the iPad start normally. If the issues still persist as mentioned above got to Settings>mail, contacts, and calendars and just turn of mail then turn back on. See if you get any errors if not check your mail again and attempt to send the email. If all above fail. Go back to settings and then mail, contacts, and calendars then select the email account that you are having issues with then delete the account. Once deleted select the option to add account and re add your email account back to your iPad. Let me know if this works for you.

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

My gmail account receives mail, but will not send, forward, or reply...it gets stuck in the spin and then I have to force quick firefox.

My gmail accounts receives mail, but will not send, reply or forward. Also cannot open settings. It gets stuck in spin mode.
I worked with an apple tech, tried several things, and then she suggested I contact Mozilla support.

Hey Butterworth,
You may need to use the information in this article to help you troubleshoot the issue with your outgoing server:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I can't get into any mail or internet unless I go thru google. I tried to reload and get error. The FIREFOX error report will not send either.

I tried to reload , received error. Will not send trouble shooting CRASH REPORT. Was working great until crash. Will not accept or I cannot figure out how to have forefox accept updates for ADOBE updates or my virus protection STOP SIGN.

<blockquote>Locking duplicate thread.<br>
Please continue in your previous thread: [[/questions/964962]]
</blockquote>

Firefox crashes most often when Yahoo is running or sometimes in midst of navigating a site and will not send an error report to Mozilla, what to do?

Frequently I have the aarp game site open and Yahoo open. At times Mozilla crashes and will not send an error message, simply brings up the restore screen. When asked to restore it never restores if Yahoo is up, Firefox just closes. At other times Yahoo may not be up but if I have two other sites up it may just dump my internet connection. Again, no opportunity to send error message. I really like a lot of the features with Firefox but the crashing is driving me crazy. A friend has had the same problem but is now just using internet explorer. I

Make sure that you haven't left a profiles.ini file.
* http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox

When i take a picture with my iphone and then forward the picture in an email (regardless of picture size) it will not send - any thoughts????? Thanks.

When I take a picture with my iPhone and then forward the picture to an emaila ddress (regardless of picture size) it will not send the email with the pciture enclosed - any thoughts on how to fix ?????
Thanks -

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

IPod Touch 4 will not send mail (Comcast POP account)

I'm having an issue sending mail (Comcast) in a new iPod Touch. I sync'd it with iTunes and the mail settings are configured exactly as my iPhone (which works sending & receiving). The iPod will receive mail but will not send. It's also able to get online through our wireless network at home.
The only thing I can think of is that it required me to update iTunes to 10.1 (from 10) before it would even be recognized in iTunes. I haven't sync'd my iPhone to the updated iTunes and really am afraid to, if that's what's causing the issue.
Here is the message:
"Canot send Mail"
The connection to the outgoing server "smtp.comcast.net" failed. Additional outgoing mail servers can be configured in settings...."
I can't understand why the iPod's mail settings would be configured any different than the other 4 macs and 1 iPhone in our household.
Any ideas?

Thanks for your help. After further trouble shooting I found that the iPod was conflicting with other outgoing mail servers that were listed as "Other SMTP Servers" in the mail settings. I deleted them and kept only the one that is used for this one email account.
"Authentication" continues to change from "password" to "MD5 Challenge-Response" on it's own. I don't know what that is, so I'll need to check into it to make sure it isn't an issue.

All of a sudden this morning my iphone will not send imessages from my phone number but only from my email address. When I go to the settings for my imessages to choose where they are coming from my phone number is greyed out....Is there a way to fix this

All of a sudden this morning my iphone will not send imessages from my phone....

Hi Chas869,
Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
ErinW_VZW
Follow us on Twitter @VZWSupport

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

Thunderbird will not send or receive email in Windows 8.1 unless I re-install. The next time I open Thunderbird it is again broken.

Thunderbird will not send or receive email in Windows 8.1 unless I re-install it. The next time I open Thunderbird it is again broken. So, I have to repeat the un-install / re-install process. Currently I am using Version 31.0, but this was happening the the previous version as well.
Here are some of the messages in the error console:
Could not read chrome manifest 'file:///C:/Program%20Files%20(x86)/Mozilla%20Thunderbird/chrome.manifest'.
Could not read chrome manifest 'file:///C:/Program%20Files%20(x86)/Mozilla%20Thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
Timestamp: 8/3/2014 8:02:29 AM
Warning: mutating the [[Prototype]] of an object will cause your code to run very slowly; instead create the object with the correct initial [[Prototype]] value using Object.create
Source File: resource://gre/components/steelApplication.js
Line: 783
Timestamp: 8/3/2014 8:02:57 AM
Warning: Use of getPreventDefault() is deprecated. Use defaultPrevented instead.
Source File: https://www.mozilla.org/thunderbird/js/jquery/jquery-1.5.1.min.js
Line: 16
Thanks for the help.
Joe

That really sounds like anti virus scanning to me. Try rebooting your machine into safe mode with networking and see if it works correctly then.

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

I had the same problem. I went in and added my email address to iMessage and deleted the text to my friends that have iPhones and sent another to test it and it worked. Only thing is now my non iPhone friends don't receive my pic text. I had to turn off iMessage for it to work. Apple needs to fix this ASAP!

AU Lab will not send output to Focusrite Saffire 6 USB - Suggestions?

Similar Messages

Maybe you are looking for