Auanable to connect with internet

I have a WRYT54GS router. I just got a new high speed internet satalite install. The router works well with two laptops wirelessly. The desk top uses a wireless USB connection, Linksys 2500. The problem is that before the satalite install, the desk top worked well with the card to connect. Now, the card connects with thw router but does not connect with the internet. I have reinstalled the 2500 software and looked at all that I could but it still does not connect with the internet but does with the router. Any one out there have a thought on this. Also the eithernet card on the desk top does not work but that is not even connected. ?????

Let me know the IP address on the desktop if it says connected? You can try the following settings to get the good performance of the wireless:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Then go to the Wireless tab, keep network mode as mixed,
 For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
 For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Similar Messages

  • How can I find the number of megabytes per seconde of mij connection with internet

    In a tuning program is asked the number of MB per second of mij lan-connection with internet.
    I should like to know how I can find that number.

    Hey Tongo,
    This isn't really a Firefox question. I would suggest doing a quick Google search for "Internet Speed Test" or something of that nature. I know a very popular one is located here: http://www.speakeasy.net/speedtest/
    Hopefully this helps!

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • After having downloaded my e-book ADE gives the information that there is not a connection with internet. What is the problem? Liejaat.

    After having downloaded my e-book, Adobe Digital Edition gives me the information  that there is no connection with internet.Who can help me with this problem? Liejaa.Adobe Digital Editions

    I've never seen this error in the context of trying to connect via ODP.NET or ODT.
    If you have Oracle Dev Tools for Visual Studio installed, you can try to create a connection to the database using Server Explorer. If this works, that means your ODP.NET connection is just fine.
    If you don't have VS or the tools, another thing you can try is connecting through ODP.NET using a simple OracleConnection.Open. Make sure you have your client set up to connect to the DB server.
    Here's some info about connecting to the DB:
    http://download.oracle.com/docs/html/B28089_01/featConnecting.htm#sthref101

  • 01 days left to connect with internet

    hi,
    i'm starting adobe muse and get a message that if i won't connect with internet within 1 day
    adobe muse won't start anymore.
    i use adobe muse now for 1 year and I AM CONNECTED TO THE INTERNET. what's up?
    greetings

    Hi,
    Could you please confirm if the issue was resolved or needs further assistance?

  • Android apps can't get connected with Internet on 10.3.1 os

    With updating the os 10.3.1..... now my z10 device can't get connected with internet....on android apps...like line app,etc....its showing error msg of check your Internet connection....same problem on other android apps...

    hello guri,
    can you give us the exact error message, or even a screenshot please ?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Airport doesn't make connection with internet (dsl-modem ST 780 WL)

    Hi,
    I 've connected two airports (extreme) with ethernetcables at a dsl-modem (older model Speedtouch). The connection with internet is okay.
    But: when I connect the same airports (on the same way: with cables) at a Speedtouch 780 WL, they have no connection with internet. Everything seems to be allright, in the airport assistent I see IP-adresses and so on.
    What 's wrong..?

    It's more likely a software problem that something wrong with the PowerBook, so posting an additional question in the Leo forums' "Getting Online and Networking" sub-section is a good idea. Leave this one here in case it sounds familiar to other PB owners.

  • Adobe cloud connection can't connect with internet

    I have a problem with the creative cloud connection. It won't connect with the internet. And I have no problems with internet.
    I tried several days but it won't work. So I thought deinstall the creative cloud connection and download it again and maybe it works.
    But now I can't download it anymore. I can get information and I see my files but there is no download button anymore.
    Can you help me.
    Regards Cora

    You can read about what is really going on, in this thread: (Essentially you were paying Adobe to be a beta tester)
    http://forums.adobe.com/thread/1203580?start=80&tstart=0

  • Can connect with AE but fail on connecting with internet

    For some reasons I needed to re-conflict my AE and changed the wireless name. 2 of my Mac computer and my iTouch could connect with no problem. But my PC (XP2) could connect with this AE but failed on internet with error message "limited or not connectivity".
    Had to Restore my PC one day back (using the System Restore), reset my AE to previous name. Now everything is ok ... what's the reason behind ???
    Thank you

    I finally get the answer :-
    The XP only works for WEP 128bit with 13 characters password and not 5 characters

  • EA6350 AC1200+ Unable to make connection with Internet

    Hi! Just wanted to ask if you could help with this issue I just bought the EA6350 AC1200+  Wifi Router. I tried to set up the router in the same manner, step by step as the instructions tell me to and the Wifi is still telling me that it doesnt detect any internet connection.Whenever i login to the Smart Wifi Menu, the screen tells me that there is a connection between the computer and the router, but no connection with the internet.  I have tried to check if its my internet's fault, by just simply connecting the cable to my laptop and the internet works just fine. My internet connection via LAN cable doenst require any login/password.  Please let me know if anyone can help! Thank you so much! nting007

    @nting007 Reset the router to factory defaults. Press and hold the reset button on the back panel of your router for about 10 seconds then release. Once accomplished, follow the steps on this link.

  • Linksys WTR160N not keeping connection with internet

    I just bought a Linksys WTR160N Broadband router and tried to connect with comcast modem Arris. Keep losing connection. Called linksys tech and he said it was my network card but when i connect direct to the modem it works fine. I bought a new linksys network N card for my laptop and it has the same problem. I am direct connected right now and has worked fine. HELP

    Try to readjust the wireless settings on your router...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Reduce the MTU size to 1300 under setup..and Click on save settings.
    For Wireless Settings, please do the following : -
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • HT4623 iOS6.1.2 - update error with "unable to verify as you are not connected ", but my connection with Internet is alright, either using 3G or WIFI.

    I am having a problem to update my iOS6.1.2. It always stop at verification step as because of failed to verified due to not connect to Internet.  Somehow, my Internet connection is alright. I test this both by using 3G and WIFI. Please assist. Thank

    Hi, I use Mail.app and sometimes it times out when waiting for a response from the ISP. I've had this happen when other apps are using up all the bandwidth, but also for random reasons. It's not an OS X thing, as the same thing happens with my OS 9 box. Some ISP servers are just flaky!
    What OS version are you running? I seem to recall that later versions of 10.3 and 10.4 fix some network-related problems, but you'd have to check the release notes to make sure.
    HTH,
    ~FifthWheel

  • Airport Extreme intermittently loses connection with Internet?

    I have an Airport Extreme connected to a router that is connected to our cable modem. Internet connection is fine, but the Airport Extreme will intermittently lose connection with the Internet and shows a solid amber light. Turning the Airport Extreme off and then on again will resolve the issue, however, this happens about once per week (at different days/times) and would like to ensure a consistent connection even when I'm not at home. (We are thinking of installing a lighting control system that depends upon a consistent wireless connection to work properly, even when we aren't home to restart the Airport Extreme). Please advise on what the trouble might be and how we can get a permanent resolution to the issue.

    Is your Extreme an 802.11g (domed-shape) or 802.11n (squarish) model? Do you have the Extreme connected to the other router by Ethernet? Finally, is the Extreme configured as a bridge, i.e., Connection Sharing = Off (Bridge Mode)?

  • Itunes slow connection with internet

    HELP please someone!
    I recently purchased an iphone 4 and so had to get itunes!
    I never had the need for it before but I'm quite impressed with it, sorts my music well and works quicker than I thought it would on Windows.
    There is 1 issue though, the connection with the internet seem terrible!
    I can't stream the 30sec clips of songs in the itunes store! If I download a song it takes at least half an hour! =(
    My connection works fine for everything else, normally around 3Mb/sec download speed, often more though! So don't have any issues with anything else!
    If I download a song from another source, often takes a matter of a few mins, if not seconds. But itunes seems so slow on the internet!
    Really quick to use, just slow as **** on the net!
    Any solutions you can suggest?
    I've got a Comodo firewall and Mcafee anti-virus and I've added itunes to their safe lists! I can't see what's slowing it up!
    HELP PLEASE!
    Thanks in advance folks!

    How about the built-in Windows firewall - is that also active?
    As a test if this was my PC, I'd turn off all firewalls and security to see if it made any difference. You can always turn it back on after the test.
    Also I'd try closing itunes in the main account, logging into the windows guest account and see if it is slow there, too.

  • Airport express makes no connection with internet

    My airport express is on green, but the router/moden above it makes no connection to internet.
    When I put the LAN directly in my computer it works fine.
    Routeraddress is 192.168.1.1.
    I used static IP 192.168.1.200 and used the bridgemodus.
    The internetrouter is a Davolink DV-2020.
    Can please tell somebody me what I do wrong?!
    Thank you.
    Olav
    P.S. I have reset and reboot the modem router a few times allready.

    On a different note about port mapping, I hope Tesserax can answer.
    I'm trying to open port 16000 for UDP only, do I put in my default gateway address or the ip4 address or my 68.xxx address?
    Also, how do I open DMZ?
    Airport Uility 7.6.1
    airport extreme 2nd gen

Maybe you are looking for

  • How to restrict the functions in People Enter and Maintain - Others LOV

    I want to restrict the functions appearing when i click on People Enter and Maintain -> Others screen. Can this be done through form personalization ? If not how can this be achived. I want to restrict the list in Assignmnet -> Others list also. Than

  • Java.sql.SQLException: FATAL ERROR document format: structure 'Statement',

    Hi Gurus,   I did JDBC to SRM scenario. In that the incoming message is posted successfull to the SRM server. But in the acknowledgement message is not delivered to the sender. It gives an error message in the RWB. Its states that the field 'ADATE' c

  • Need to create 500 designs, all identical in every way except for a unique QR code

    Hi there. I am using Photoshop CS6. I have a design from which I want to create 500 versions of an image. All will be identical, except for the QR code which will be unique for every one. The placement of the QR code will be identical in all of them.

  • Import and Burn CD Ding When Complete

    How do I turn off the 'ding' notifier in iTunes when an import or cd burn is complete? I can't find how to do this and when I went to the Apple store, the guy at the 'Genius Bar' had no answer. I appreciate any help.

  • Best practice for messages that fails

    Hi all, In a scenario, for e.g. proxy -> XI -> WS For e.g. if the Webservice service is down, we would have a message failure in XI. What is the best practice in business scenario to handle such situations? Appreciate any comments,