AUC Asset Number and Main Asset Number Line Item Details

Hi Assets Experts,
My Customer wants see the details of line item from AUC asset to Main Asset Number, we have create Capital PO Rs. 100000/- One Lac  and Assign Internal Order No.600600 in PO.when good receipt MIGO. with reference internal Order no.600600 for Particular AUC Asset, coz we have assign the Internal Order No.600600 into  AUC Asset.number 900600, now we started commissioning for Plant Asset and booked some expenses like 25000 thousand now Asset has been use for production. so we have settlement the AUC asset to Main Asset . Main Asset Number is 200600
we have settled thru KO88 then AIAB and AIBU , in AIBU give FXA No. i.e 200600.
So whenever want to see the particular Asset Number i.e 200600 should be shown all the line item here only two line item one is GR. Rs. 1,00,000/- and another line item is 25,000/- Booked Expenes.
how can we see the details in SAP. thru line item wise. wht T.Code
Kindly advice wht should i do for the fetch the details of Particular main Asset i.e 200600 which show two line item.
Kind regards
Pranav Kr. Gupta
SAP FICO Consultant

Thanks Narasimhulu,
for immediate reply,
But sir in T.Code AB03  we can see the AUC  Asset Details Line Item, wht Customer wants link between from AUC Asset  number to Main Asset  number as well so that it is easy to understand under AUC Asset see the Details  i said mentioned in above mail,
Against AUC Asset Number 900600 to display main asset as well i.e 200600.
there is any T.code where we can see the links from AUC to Main Asset Number should be display along with Line item.
Kindly help me in this regards
for Audit Purpose customer requirement.
its urgent.
Note : We working on  ECC6, but NEW GL Document Splitting not activated... till now.
Kind regards
Pranav Kr. Gupta.
SAP FICO Consultant

Similar Messages

  • Multiple asset numbers in Single PR/ PO line item

    Hello,
    If we enter multiple Asset Numbers in single PR/ PO line item then we get following error message while doing GR  -
    ' Entry 7100000256 00001  not in table XACCOUNTING (system error) '
    Message no. M7000
    For this PO, in account assignment we have selected 'Distribution' as 'Distribution on quantity basis' and 'Partial Inv' as 'Distribute to following row'
    In case of procurement of materials like chair, we are procuring few hundred materials and for each chair we are creating one asset number.
    Please help to resolve.
    Regards,
    Milind Dumbre
    Edited by: Milind Dumbre on Feb 2, 2011 3:24 PM

    Hello,
    Check these  SAP notes 1386249, 1550451 is relevant for you. These  notes are applicable for your system. these notes are non industry specific.
    You can try these note , i think your problem may get resolve.
    Regards
    Mahesh Naik

  • Report to get Asset Line item details & user id details

    HI All,
    Is there any report to get Asset No, Assets line item details & user Id details.
    Thanks in advance.
    Ava

    Hi,
    which user ID? User created? User last changed?
    You can enhance any standard report with individual fields, see WIKI entry [Include additional fields in Standard Fixed Asset ALV reports|https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV] and/or SAP note 335065.
    User who created the asset is field ANLAV-ERNAM.
    Regards,
    Markus

  • Report to find a material by a mfr part number and old material number

    Hi,
    Is there any standard report to find a material by a mfr part number and old material number ?
    For the moment, we are using MM03 to search articles by these selection criterion.
    Thanks,
    Julien Girard

    Hi
    As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
    Use Txn SQVI, enter the Quick view field say- ZMNFR and click the  create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter  MARA  for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only.  Click the tick mark , you will go to the next screen,
    You will notice Quick viewer Intial screen
    Open the node general material data
    Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
    Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
    Please ensure that you are maintaining both the details in material master basic data1 and purchasing  view if you wish to get  out output
    Best regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:52 AM

  • Invoice Number and Performa invoice number

    Hi all
      I want to get the combination of invoice Number and Performa invoice number, I have got the VBFA Table, but it’s very slow, any alternative program or function please help me
    Thanks
    Kanishka

    Try AC_DOCUMENT_RECORD. It returns all kind of accounting documents.

  • Download Error - Contact customer support. Indesign wont load application have gone from the control panel. CS photoshop loads and wants a serial number - and my serial number dosent work?

    Download Error - Contact customer support. Indesign wont load application have gone from the control panel. CS photoshop loads and wants a serial number - and my serial number dosent work?

    Hello Bradley,
    sometimes the "opm.db file" is the culprit. In this case you should delete it.
    But as much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
    Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
    I quote: ... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
    Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html   and follow the prescribed sequence of operations
    If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html and if "open" please use chat, I had the best experiences.
    Good luck!
    Hans-Günter

  • Shipment document number and cost document number for vendor invoice

    Hi,
    Given a Vendor invoice number ( MIRO) how to find out the shipment number and cost docuemnt number?
    Regards,
    Krishna prasad.

    Hi,
    Please try using SREL_GET_NEXT_RELATIONS. Please try to search on SDN and you should find an example fo this. The only thing you need to pass is the Business Object Name for Vendor Invoice number. Or if you have an alternal field like even PO that you can pass , that will be of great help as well.
    You may want to take a look at:
    SREL_DISPLAY_LIST_OF_NEIGHBORS
    SREL_GET_NEXT_RELATIONS
    Pls reward points if useful.
    Thanks
    Ganesh.S

  • PO number and Finance doc number connection

    Hi Experts,
    In our project we got a requirement like we need to show fields from fs10n, fields are, GL account number,
    FI document number, PO number, Amount in local currency and PO description.
    I didnt see any datasource which bring PO number, FI GL account number and Finance document number together, so please guide me in this regards.
    how can i bring finance and purchase data together?? which is the appropriate data source for this?
    Thanks,
    urs raghu

    >
    ursraghu.bw wrote:
    > Hi Experts,
    >
    > In our project we got a requirement like we need to show fields from fs10n, fields are, GL account number,
    > FI document number, PO number, Amount in local currency and PO description.
    >
    > I didnt see any datasource which bring PO number, FI GL account number and Finance document number together, so please guide me in this regards.
    >
    > how can i bring finance and purchase data together?? which is the appropriate data source for this?
    >
    > Thanks,
    > urs raghu
    U can do a multprovider on both Purchasing and Finance InfoCube.
    In R/3, table BSEG has a field call EBELN. So I believe in BW you can use DataSource 0FI_GL_14 as it contains PO num, acct doc, etc. As long with these keys, it is easy to do a join or lookup DSO or even a multiprovider.
    hope it helps.

  • Link between inv. number and accounting document number

    Hi Frnds,
    When i receive  a partial receipt (of an invoice) from a customer, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?

    Hello,
    Try to prepare query based on tables BSIK, BSAK and BSEG. (Transaction code SQVI)
    Regards,
    Ravi

  • Link between Invoice verifycation number and Accounting Document number

    Dear All
                   I want the Link between invoice verifycation number (MIRO) an accounting document number the same MIRO. in which table the both two numbers avilable.
    How can identify. can any one tell me the table name for this
    Regards
    Kumar.

    Hi..
    What is the link or join condition for these two tables
    BKPF and RBKP. and RSEG and BSEG.
    In this i want to Accounting document number and invoice verifycation number in a single report.
    Regards
    Kumar

  • Link between invoice number and accounting document number

    Hi Frnds,
    When i receive a partial receipt (of an invoice) from a customer, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?

    hi
    try these tcodes
    FBL5N
    FB02
    regards

  • Relation accounting document number and clearing document number

    Hi everyone,
    What is the relation between accounting document number and clearing document number.

    For every accounting document when it is posted it should be available in BKPF Doc header table.. Once that document is closed or cleared..there is any entry made to BSAK for Vendors (Cleared Items) or BSAD for Customers (Cleared Items).
    Eg: When a invoice is generated for a PO it gets created and is still not cleared or is not closed , it makes an entry in BSIK. Once it is closed it is available in BSAK.
    Same is the case with Sales order..

  • MM Document number and FI document number is a single table

    Dear Friends,
    Could you please let me know the table where both MM document number and FI document number will be available. I checked in BKPF and it is only updating FI document number and not MM document number and in MKPF it is only updating MM doc number and not FI document number.
    Also let me know if there is any report/tcode/program available to view this at one place itself.
    Regards,
    Dwarak.

    hi
    i dont think you can view both table in one screen.
    in T-CODE:SE16N you can see one by one table.
    Regards
    ramana

  • How do you add a mobile number and a home number to a contact on a 4S

    How do you add a mobile number and a home number to a contact on an iPhone4S?

    First add the mobile number. Once you've done that there should be another field that shows 'iPhone". Tap on 'iPhone' and change it to 'Home' then input the home number.

  • How to design sequence number and sub sequence number

    Hi
    I am creating DMEE for bank file, there is sequence number and sub sequence numbers in the file.
    File structure
    Aaa name 0001 tax id amount
    Bbb name 00010001 dnum amt
    Bbb name 00010002
    Bbb name 00010003
    Aaa name 0001 tax id amount
    Bbb name 00020001
    Bbb name 00020002
    Could you please help me on how to design sequence and sub sequence number in DMEE structure.
    Regards,
    Guna

    Hi,
    please find seqence number and sub sequence number in below file structure.
    Aaa name 0001(Seq. num) tax id amount   -------------------------------------header
    Bbb name 0001(Seq.num)0001(sub seq num) dnum amt---------------- item
    Bbb name 0001(Seq.num)0002 (sub seq num) ---------------- item
    Bbb name 0001(Seq. num) 0003(sub seq num) ---------------- item
    Aaa name 0001(Seq. num) tax id amount                  --header
    Bbb name 0002(Seq. num)0001(sub seq num)---------------- item
    Bbb name 0002(Seq. num)0002(sub seq num)---------------- item
    TRL
    Please help me to design sub sequence number and sequnce number again in the item details.
    Best regards,
    Anji

Maybe you are looking for

  • Scheduling a filter to run only once a day

    Hi All, I am trying to build a filter running once every day, so far i am using "scheduledSystemEvent" which executes the filter every 5 mins. I tried doing this via "CustomScheduleEvnet" also but did not have any luck with it. Following is the snap

  • When I close labview I get a Visual C++ runtime library error, how do I resolve this issue?

    I am using Labview 2012 (64 bits) on a Windows 7 OS. The error code is R6031 - Attempt to initalize the CRT more than once. This indicates a bug in your appilcation.

  • PO status update in SRM

    Hi friends, We have seen PO's approved and released through w/f. It has been replicated in R/3 but when user sees the status on SRM portal, it shows as 'Error in Process'. Is there any way we can update that status manually. Please advice on that. I

  • Slow redirect by mod_oc4j during network failover - 10g R2

    I have successfully installed two OracleAS 10g application server instances (app1, app2) on two machines and added both instances to a cluster (cluster1). Each application server contains a single OC4J instance (home) with a single OC4J process. I ha

  • Equal background to photo color and position graphic or text within the cli

    Hello, I am new and this is my first post. I started creating my first video and get pretty far for the first time today. I did use video footage, photos and text. The footage is fine, but I would like to give the photos a background which I choosed