AuC requires an area in the controlling area currency EUR

Hi,
In our new business scenario we have one country in Europe which uses currency EUR and another country is Morocco which uses currency MAD. We have concept of Alternative Chart of Accounts for Morocco statutory requirement and primary chart of accounts is Spain. There is a one controlling area and two different company codes for two different countries. In Controlling area our configuration is Currency Type - 20(Controlling Area Currency), tick the check box of Diff.company code currency and curency is EUR. While I am creating Internal Order for CWIP asset of Spain where currency is EUR I am not getting problem of crating CWIP asset through KO01.
While I am creating Internal Order for CWIP asset of Morocco where currency is MAD I am getting problem of creating CWIP asset through KO01. Error shows as :
AuC requires an area in the controlling area currency EUR
Message no. AY310
Diagnosis
The controlling area currency EUR is not managed in any of the areas of the asset under construction that is to be created. However, this currency is required for the capital investment measure.
System Response
Error message: Creating the AuC or releasing the order/ WBS element is not possible; or changing the asset under construction is not possible.
Procedure
Check if you manage the controlling area currency in one of the depreciation areas in Asset Accounting, especially in asset class M999. If you do not, then define such a depreciation area. Make sure that this depreciation is active in asset class M999.
You can save the order / WBS element if you remove the investment profile that was entered.
u2022     If you are in the 'Change asset' transaction, check if you have deactivated a depreciation area that manages controlling area currency EUR. Re-activate this depreciation area.
What will be the probable solutions ?
Best Regards,
Samrat Roy

HI Samrat Roy
Is it your Chart of Accounts & Fiscal Year is the same for both Company Codes?
Is your Chart of Deprecaition is same for both company code?
And finaly Maintain 2 Deprecaition areas for 2 different types of Currency. 
Let me kown furhter proces
Regards

Similar Messages

  • AuC requires an area in the controlling area currency USD

    Hi,
    when i posting AUC through Internal Order i am getting error "AuC requires an area in the controlling area currency USD message no.AY310"
    Diagnosis
    The controlling area currency USD is not managed in any of the areas of the asset under construction that is to be created. However, this currency is required for the capital investment measure.
    System Response
    Error message: Creating the AuC or releasing the order/ WBS element is not possible; or changing the asset under construction is not possible.
    Procedure
    Check if you manage the controlling area currency in one of the depreciation areas in Asset Accounting, especially in asset class 1200. If you do not, then define such a depreciation area.  Make sure that this depreciation is active in asset class 1200.
    You can save the order / WBS element if you remove the investment profile that was entered.
    If you are in the 'Change asset' transaction, check if you have deactivated a depreciation area that manages controlling area currency USD.  Re-activate this depreciation area.
    Please help me in this issue.
    Regards,
    Venkat.

    Hi Venkat,
    I think you need to maintain depreciation area for the controlling area currency USD for atleast the asset class (i.e.1200)..Then the problem will be solved.
    In the error text only, SAP has given clear cut procedure.
    Sateesh

  • Why does the REQUIRED security flag allow the control flow inspite failure

    Hi,
    I have a small query regarding the security flags of for LoginModule(s).
    When a LoginModule is given a required flag, it allows the login mechanism to continue checking the other login modules. However, the overall login mechanism will fail even if one single module with the required flag has failed.
    Can someone help me understand why is it so. The only reason i can think of is to allow some sort of debugging.
    Thanks

    Thank you for your reply.  I changed the error handling as you suggested on the 2nd lookup to redirect to unmatched rows.  Now I get all greet.  I don't have the conditional split as in your diagram.  But also, nothing appears to have
    happened in the DB.  Aren't the rows in my text file supposed to be added to the FactCurrencyRate table?
    How do I get a conditional split?
    Rich P
    OK, sorry I forgot to reply you back.
    Conditional Split was just dummy task. Ignore it.
    Manipulate the data in such way that you get matching records.
    Inside Source, for first 2 rows I put the dates which are available in DimDate.
    1.00010001,ARS,7/1/2005 0:00,0.99960016
    1.00010001,ARS,2/5/2006 0:00,1.001001001
    1.00020004,ARS,9/5/2001 0:00,0.99990001
    1.00020004,ARS,9/6/2001 0:00,1.00040016
    1.00050025,ARS,9/7/2001 0:00,0.99990001
    1.00050025,ARS,9/8/2001 0:00,1.001001001
    Then in OLE DB Destination, I loaded the rows to TestFactTable.
    (Now, you don't even need NO MATCH OUTPUT as there are matching records here)
    Cheers,
    Vaibhav Chaudhari
    [MCTS],
    [MCP]

  • Controlling area currency diff from comp code currency

    Hi Gurus,
    In all the reports for for viewing the budget vs actual,  i am getting in controlling area currency(EUR) I want to view that in company code currency( INR) by default without having to change the currency.
    Thanks in advance

    Hi,
    You have two options:
    Enter either a target currency or one of the following currencies:
    Controlling area currency
    Object currency
    Transaction currency
    If you enter a target currency, enter the following data for currency translation:
    Base currency
    Date of translation
    Exchange rate type
    The SAP system uses these entries to convert from the selected base currency to target currency values
    Hope its useful.
    Reward points if useful.
    Thanks..

  • Programmatically changing the Control Type of ViewCriteriaItem

    Our requirement is dynamically changing the Control Type (Date, LOV, Combo box, etc) of ViewCriteriaItem.
    We are trying in the following way,
    ViewCriteriaManager vm = view.getViewCriteriaManager();
    oracle.jbo.ViewCriteria vca[] = vm.getAllViewCriterias();
    oracle.jbo.ViewCriteria vc = vca[0];
    vc.removeAllElements();
    ViewCriteriaRow vcr = vc.createViewCriteriaRow();
    vcr.setAttribute((String)viewItemRow.getAttribute("WvciColumnName"),"");
    ViewCriteriaItem vc_item1 = vcr.ensureCriteriaItem((String)viewItemRow.getAttribute("WvciColumnName"));
    // Based on some condition
    vc_item1.setProperty(ViewCriteriaItem.CONTROL_TYPE, ViewCriteriaItem.ControlType.DATE);
    But the control type is not changed in UI?
    Kindly help us
    Regards,
    Vijay

    Hi Sonny:
    Finally I've solved the problem in Java mapping program, changing the content-type parameter like this:
         public void setParameter(Map mParametro)
              this.mParametro=mParametro;
              if (mParametro==null)
                   this.mParametro=new HashMap();
              mParametro.put(StreamTransformationConstants.CONTENT_TYPE, "text/xml");
    I hope it helps you. Regards,
    Alejandro.

  • To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • ITunes wont open. when I click on it, it says " iTunes can not run because of the required files are missing. please reinstall iTunes.

    iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!

    See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

    When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
    I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
    Anything I haven't tried?
    HELP!

    A bit confused by your statement
    bcboarder wrote:
    . I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
    Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
    I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
    A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
    You can try to borrow and  use the Mac Disk Utility ->First Aid ->Repair.
    Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

  • Error during hyperbuild - "cannot find the file 'namake' (or one of its components. Make sure the path and filename are correct and all required libraries are available."

    I have just installed v6.3 for Windows and am trying to run a hyperbuild simulation of a legacy (v6.2 UNIX) model. I suspect that I don't have everything configured right (path to C compiler???) I get the error message "can't find 'nmake'" during simulation.
    Help!

    Sorry I wasn't being very clear either.  I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004.  Once you know what environment variables have changed you can go the control panel to set them.  Some of them will may be new variables that you will need to define.  Others may already exists in which case you want to append to them.
    The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath.  You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat).  This batch file would have two lines.  One to run VCVARS32.bat and the second to run XMATH.bat.  If you are not familiar with batch files there are a lot of resources on the web about them.  In this case all you would need is:
    <path to vcvars32.bat>\vcvars32.bat
    "C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat"  -v 71.6
    The -v 71.6 is optional.  it specifies to specifically open version 7.1.6.  If you leave it off the newest version will be opened.
    Carl L
    National Instruments

  • Itunes cannot run because some of the required files are missing?

    This morning when I turned on my computer my itunes was suddenly not working. When I double click the desktop icon to open it up, I get an error message that reads:
    iTunes cannot run because some of the required files are missing. Please reinstall iTunes.
    I searched the FAQ archive and still cannot find an answer to my problem.
    THe last part of the error message says to reinstall itunes, but I cannot even get the corrupt version off. Is there anyway to save the music I have on here? Another user and I have separate iTUnes music, so a great deal of music will be lost, including things recently purchased.

    Thank you so very much. I don't know why I didn't think of that but it is up and running fine now

  • Help!  When I connect to itunes it tells me that required files are missing and please reinstall.  I have reinstalled and the same message appears.  Thanks. Windows XP

    Help!  I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall.  I have reinstalled, I have deleted and reinstalled and the same message appears.  Thanks.
    Windows XP

    Meanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.

  • I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • "iTunes can not run because some of the required fields are missing.  Please reinstall iTunes."  What the ****?!

    "iTunes can not run because some of the required fields are missing.  Please reinstall iTunes."  What the ****?  Please help me figure this out.  I already removed quicktime (as another thread suggested).  I can't get in!

    i get same error.
    I have uninstalled and reinstalled more times than i care to count. but still i get
    itunes cannot run because some of its required files are missing.

  • After upgrade to 4.0, the controls on mymsn page do not work and several of my content items are not displayed.

    The stock quotes, fox sports and movie times content fields do not display and the controls do not work on any of content boxes. The customize and add content tabs do nothing. This all worked with 3.6 but not with 4.0.

    A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
    Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
    ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
    Edited by: mimi_jones on Jul 18, 2011 6:16 AM

Maybe you are looking for

  • Replacing New Macbook Pro Hard Drive

    Im about to purchase a Seagate Momentus 7200.3 for my new MBP. My question is, will apple to the drive swap for me for free? Also will they migrate my old disk image to the the new drive, or will I have to reinstall OSX and migrate my files from a Ti

  • Help needed - OBIEE - Level Based Hierarchy - Expanding Month for one year affects all previous years

    I am creating a level based hierarchy for the Date Dimension year --> quarter --> month --> date (one path) year .--> month --> date (the second path). I create the pivot table using these dim hierarchies. But the problem is, when I click on, say "Mo

  • Error in SES.

    Hi Experts, while creating the SES when we enter the short text in SES and then fetching the services from the PO this error comes. Error initializing text Message no. SE208 Diagnosis An error has occurred within the system during the initialization

  • OSX, Firefox, and Multiple User Problems

    Hi I posted this question over at Mozilla but no one could offer any tips, hope someone has an idea here. I'm using OS X on a machine with mulitple users set up. When I created the users however, I duplicated everything from User1 to make the rest of

  • Getting dump while calling adobe form

    Hello All, I am working on a webdynpro application and within the application I am calling a adobe form, when I call the adobe form I am getting the following short dump: Error in the ABAP Application Program The current ABAP program "CL_WD_ADOBE_SER