AuC requires an area in the controlling area currency USD

Hi,
when i posting AUC through Internal Order i am getting error "AuC requires an area in the controlling area currency USD message no.AY310"
Diagnosis
The controlling area currency USD is not managed in any of the areas of the asset under construction that is to be created. However, this currency is required for the capital investment measure.
System Response
Error message: Creating the AuC or releasing the order/ WBS element is not possible; or changing the asset under construction is not possible.
Procedure
Check if you manage the controlling area currency in one of the depreciation areas in Asset Accounting, especially in asset class 1200. If you do not, then define such a depreciation area. Make sure that this depreciation is active in asset class 1200.
You can save the order / WBS element if you remove the investment profile that was entered.
If you are in the 'Change asset' transaction, check if you have deactivated a depreciation area that manages controlling area currency USD. Re-activate this depreciation area.
Please help me in this issue.
Regards,
Venkat.

Hi Venkat,
I think you need to maintain depreciation area for the controlling area currency USD for atleast the asset class (i.e.1200)..Then the problem will be solved.
In the error text only, SAP has given clear cut procedure.
Sateesh

Similar Messages

AuC requires an area in the controlling area currency EUR

Hi,
In our new business scenario we have one country in Europe which uses currency EUR and another country is Morocco which uses currency MAD. We have concept of Alternative Chart of Accounts for Morocco statutory requirement and primary chart of accounts is Spain. There is a one controlling area and two different company codes for two different countries. In Controlling area our configuration is Currency Type - 20(Controlling Area Currency), tick the check box of Diff.company code currency and curency is EUR. While I am creating Internal Order for CWIP asset of Spain where currency is EUR I am not getting problem of crating CWIP asset through KO01.
While I am creating Internal Order for CWIP asset of Morocco where currency is MAD I am getting problem of creating CWIP asset through KO01. Error shows as :
AuC requires an area in the controlling area currency EUR
Message no. AY310
Diagnosis
The controlling area currency EUR is not managed in any of the areas of the asset under construction that is to be created. However, this currency is required for the capital investment measure.
System Response
Error message: Creating the AuC or releasing the order/ WBS element is not possible; or changing the asset under construction is not possible.
Procedure
Check if you manage the controlling area currency in one of the depreciation areas in Asset Accounting, especially in asset class M999. If you do not, then define such a depreciation area. Make sure that this depreciation is active in asset class M999.
You can save the order / WBS element if you remove the investment profile that was entered.
u2022 If you are in the 'Change asset' transaction, check if you have deactivated a depreciation area that manages controlling area currency EUR. Re-activate this depreciation area.
What will be the probable solutions ?
Best Regards,
Samrat Roy

HI Samrat Roy
Is it your Chart of Accounts & Fiscal Year is the same for both Company Codes?
Is your Chart of Deprecaition is same for both company code?
And finaly Maintain 2 Deprecaition areas for 2 different types of Currency.
Let me kown furhter proces
Regards

Why does the REQUIRED security flag allow the control flow inspite failure

Hi,
I have a small query regarding the security flags of for LoginModule(s).
When a LoginModule is given a required flag, it allows the login mechanism to continue checking the other login modules. However, the overall login mechanism will fail even if one single module with the required flag has failed.
Can someone help me understand why is it so. The only reason i can think of is to allow some sort of debugging.
Thanks

Thank you for your reply. I changed the error handling as you suggested on the 2nd lookup to redirect to unmatched rows. Now I get all greet. I don't have the conditional split as in your diagram. But also, nothing appears to have
happened in the DB. Aren't the rows in my text file supposed to be added to the FactCurrencyRate table?
How do I get a conditional split?
Rich P
OK, sorry I forgot to reply you back.
Conditional Split was just dummy task. Ignore it.
Manipulate the data in such way that you get matching records.
Inside Source, for first 2 rows I put the dates which are available in DimDate.
1.00010001,ARS,7/1/2005 0:00,0.99960016
1.00010001,ARS,2/5/2006 0:00,1.001001001
1.00020004,ARS,9/5/2001 0:00,0.99990001
1.00020004,ARS,9/6/2001 0:00,1.00040016
1.00050025,ARS,9/7/2001 0:00,0.99990001
1.00050025,ARS,9/8/2001 0:00,1.001001001
Then in OLE DB Destination, I loaded the rows to TestFactTable.
(Now, you don't even need NO MATCH OUTPUT as there are matching records here)
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Activate Cost Component Split in Controlling Area Currency

Hello,
I have controlling area currency USD and company code currency INR. When I do WIP run then system is giving error messages "contr.area currecy is missing" and "not find valid cost component structure" and suggesting to maintain "Cost Component Split in Controlling Area Currency".
When I maintain then after that I am not able to run CK11N for std.cost estimate only with the error "cost componenet spit costed with zero" and also system giving this message on front screen of ck11n, means not allowing to go into ck11n result screen.
Could you please give me some tips or check point on this issue.
Thanks
Regards
Ravi

I'd revert to the Cost Component per Co Area currency config that you were forced to delete (as per your other post) - but this time, just for a Costing Type or a specific Val Variant and check the results.
Maybe that'll throw some light... also check if you maintained all the Exchange Rate config in your system... check General Settings for all the config that is required.
Cheers.

REPORT S_ALR_87013558 - budget in Controlling area currency not correct

Hi ,
these are the budget column settings :
Key figure          Overall in CAC
Version     0     Plan/Act - Version
Value Type     41     Budget
Object ind.     P     Project item
Debit type     1     Costs and credit-side payments
My case is the following :
Controlling Area Currency : USD
WBS object currency : EUR .
The budget on the wbs is in EUR ; unfortunately the bdg displayed into the report , has a Change rate that i dont' recognize .
E.G. Budget on the wbs 110000 EUR - bdg displayed into report : 120.153,85
If i launch the transaction cj31 i see the bdg , if i select controlling area currency , the bdg in USD >156.200,00.
This value is read from the table BPGE .
Why does the report S_ALR_87013558 don't read it also from there?
thanks and regards

hi
in PS all the Cost reports are read from the Info Database.

CJI3 Report - Balance in Controlling Area currency after settlement

Hi Friends,
When I run CJI3 report for one of my projects, the system displays the actual costs in Controlling Area Currency and Object Currency. Controlling Area currency is USD and Object Currency is EUR. After settlement, for one of the cost elements, the CJI3 report shows 0 EUR actual costs balance under Object Currency and displays 19.5 USD actual costs balance under Controlling Area currency. This seems to be coming from PM05 order and the the posting dates are different.
Why there is balance shown in Controlling Area currency (USD) (may be due to exchange rate difference according to me..)?
How this issue can be resolved so that I can go ahead to close the project?
One more thing related to the same issue, when I run CN41 (Structure Overview0 report), it shows a difference actual costs balance (3201USD)? Why is it different from CJI3 report? Which report is correct?
Thanks & Regards,
Balakrishnan

you need to check two things -
are you settling the PM05 order to WBS before settling the WBS itself
or
there seems to be another account to make provision for exchange rate fluctuation - check that out

Controlling area currency - urgent

Hi,
In a project we are using Controlling Area Currency as INR. As our group company is europe based they want us to change to EUR. We are also using PCA where currency is INR. I want to know the pros and cons of changing the same to EUR from INR.
Bye,
Ramesh

Hello
Check this if it could help you
When you create a controlling area, you specify whether the controlling area currency may differ from the company code currency, and which particular currency is to be the controlling area currency.
You can use the company code currency or the currency of a different organizational unit recorded as a parallel currency in the company code. You can also use a separate controlling area currency not dependent on the company code currency.
Cross-company code cost accounting can therefore be performed for company codes that use values recorded in different currencies. SAP recommends that you specify a consistent parallel currency for the company codes, and use this as the controlling area currency. In this case, postings in Controlling are made that are relevant for Accounting.
The following currencies are valid in Controlling:
· Controlling area currency
The system uses this currency for cost accounting. This currency is set up when you create the controlling area. It is based on the assignment control indicator and the currency type.
(see: Specifying Controlling Area Currency )
· Object currency
Each object in Controlling, such as cost center or internal order, may use a separate currency specified in its master data. When you create an object in CO, the SAP system defaults the currency of the company code to which the object is assigned as the object currency. You can specify a different object currency only if the controlling area currency is the same as the company code currency. There is an object currency for the sender as well as one for the receiver.
· Transaction currency
Documents in Controlling are posted in the transaction currency. The transaction currency can differ from the controlling area currency and the object currency. The system automatically converts the values to the controlling area currency at the exchange rate specified.
The system always translates actual data with the average rate (exchange rate type M).
You store the exchange rate type for each currency. You can specify a different exchange rate type for planning data in the version.
All three currencies are saved in the totals records and the line items. This enables you to use the different currencies for evaluations in the information system. This is only possible if you specified that all currencies should be updated for the given controlling area (see: Maintain Controlling Area).
The transaction currency is USD, the controlling area currency is EUR, and the object currency is SFR (Swiss francs). The system converts the amounts as follows:
1.) From transaction currency to controlling area currency (USD ® EUR)
2.) From controlling area currency to object currency (EUR ® SFR)
The following additional currencies may also appear as controlling area currencies in Controlling if you use cross-company code cost controlling:
Local Currency:
Company code currency (country currency) used for local ledgers in external accounting.
For each company code you can specify one or two parallel currencies (= second and third local currencies) which are stored in the documents and updated parallel to the local currency in the general ledger.
Group Currency:
Currency in which the group balance sheet is displayed.
You can specify it as a parallel currency (additional local currency) for a company code.
Hard Currency:
Secondary currency for countries with high inflation. You can specify it as a parallel currency (additional local currency) for a company code. You need to specify the hard currency in the detail screen for the corresponding country.
Index-Based Currency:
Country-specific, fictitious currency stipulated in certain countries with high inflation for tax returns. You can specify it as a parallel currency (additional local currency) for a company code. You need to specify the index-based currency in the detail screen for the corresponding country.
Global Company Currency:
Currency used in a corporate group. In the CO application component you can create companies to represent divisions, regions, or product groups.
You can specify it as a parallel currency (additional local currency) for a company code. You need to store the global company currency in the detail screen for the corresponding company.
For more information on defining parallel currencies, see Customizing under Financial Accounting ® FI Global Settings ® Company Code ® Parallel Currencies ® Defining additional local currencies.
Reg
*Assign points if helpful

Programmatically changing the Control Type of ViewCriteriaItem

Our requirement is dynamically changing the Control Type (Date, LOV, Combo box, etc) of ViewCriteriaItem.
We are trying in the following way,
ViewCriteriaManager vm = view.getViewCriteriaManager();
oracle.jbo.ViewCriteria vca[] = vm.getAllViewCriterias();
oracle.jbo.ViewCriteria vc = vca[0];
vc.removeAllElements();
ViewCriteriaRow vcr = vc.createViewCriteriaRow();
vcr.setAttribute((String)viewItemRow.getAttribute("WvciColumnName"),"");
ViewCriteriaItem vc_item1 = vcr.ensureCriteriaItem((String)viewItemRow.getAttribute("WvciColumnName"));
// Based on some condition
vc_item1.setProperty(ViewCriteriaItem.CONTROL_TYPE, ViewCriteriaItem.ControlType.DATE);
But the control type is not changed in UI?
Kindly help us
Regards,
Vijay

Hi Sonny:
Finally I've solved the problem in Java mapping program, changing the content-type parameter like this:
     public void setParameter(Map mParametro)
          this.mParametro=mParametro;
          if (mParametro==null)
               this.mParametro=new HashMap();
          mParametro.put(StreamTransformationConstants.CONTENT_TYPE, "text/xml");
I hope it helps you. Regards,
Alejandro.

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

ITunes wont open. when I click on it, it says " iTunes can not run because of the required files are missing. please reinstall iTunes.

iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!

See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Error during hyperbuild - "cannot find the file 'namake' (or one of its components. Make sure the path and filename are correct and all required libraries are available."

I have just installed v6.3 for Windows and am trying to run a hyperbuild simulation of a legacy (v6.2 UNIX) model. I suspect that I don't have everything configured right (path to C compiler???) I get the error message "can't find 'nmake'" during simulation.
Help!

Sorry I wasn't being very clear either. I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004. Once you know what environment variables have changed you can go the control panel to set them. Some of them will may be new variables that you will need to define. Others may already exists in which case you want to append to them.
The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath. You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat). This batch file would have two lines. One to run VCVARS32.bat and the second to run XMATH.bat. If you are not familiar with batch files there are a lot of resources on the web about them. In this case all you would need is:
<path to vcvars32.bat>\vcvars32.bat
"C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat" -v 71.6
The -v 71.6 is optional. it specifies to specifically open version 7.1.6. If you leave it off the newest version will be opened.
Carl L
National Instruments

Itunes cannot run because some of the required files are missing?

This morning when I turned on my computer my itunes was suddenly not working. When I double click the desktop icon to open it up, I get an error message that reads:
iTunes cannot run because some of the required files are missing. Please reinstall iTunes.
I searched the FAQ archive and still cannot find an answer to my problem.
THe last part of the error message says to reinstall itunes, but I cannot even get the corrupt version off. Is there anyway to save the music I have on here? Another user and I have separate iTUnes music, so a great deal of music will be lost, including things recently purchased.

Thank you so very much. I don't know why I didn't think of that but it is up and running fine now

Help! When I connect to itunes it tells me that required files are missing and please reinstall. I have reinstalled and the same message appears. Thanks. Windows XP

Help! I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall. I have reinstalled, I have deleted and reinstalled and the same message appears. Thanks.
Windows XP

Meanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.

AuC requires an area in the controlling area currency USD

Similar Messages

Maybe you are looking for