AUC standard report

Dear PS experts,
is there any standard report on AUC numberwise ?
pl help in giving the tcode for the same.
all the capital investment projects, before making final asset/capitalisation, ps system generated automatic  AUC (Asset Under Construction) number. we would like to see all the AUC numbers generated by ps irrespective of final/capitalisation of project.
thanx in advance
regards
Srihari

hi srinivas,
i am looking for a std report which is exclusively has the auc numbers. these auc numbers generated with different numbering range.  but the said report s_alr_87011964 is only showing the final asset numbers.
i reiterate the process of mine, before creating final asset, ps syster generate the auc number and keeps adding the various costs incurred during differnt periods in single auc number for a capital investment project. after creating the final asset, i am creating settlement rule in project for this asset so that auc amount is entirely transferred to this asset. once auc is zero, we close the project and auc is deactivated automatically.
now requirement is there any std report of knowing the only auc numbers.
pl helpl
regards
srihari

Similar Messages

  • AUC details in any Standard Report ?

    Hi PS gurus,
    Request pl let me know is there any standard report which can give details of AUC details projectwise before or after capitalisation of projects.
    Thanks in advance
    regards
    Srihari

    Hi sudhakar,
    i have tried with cjid but not getting desired info.
    i have to know the AUC positings after capitalisation of project. auc postings are  possible if the project is not closed. Once the project is closed at cj02 level, then the AUC is deactivated, u can see deactivation at as03 with auc no. in this case no one can post any costs in network-wbs-auc
    My requirement:
    After capitalisation of project, if the project is not closed by project dept and the project engineer is booked some costs and done gr/ml81n in network of the same project, then the costs are going to sit in network, and then we have to do cj88 to move from network-wbs-auc, in this case i would like to see the auc postings in any standard report. is it possible. ?
    pl help if any solution available.
    thanks in advance
    regards
    srihari

  • AUC Transfer Report

    Dear Experts,
    Is there is any standard report to check whether Month End Settlements to AUC's via CJ8G, has happened properly? In other words to check whether values are transfered from expense accounts to Balance Sheet Accounts....
    Many Thanks,
    Dileepa.

    use reporting for that
    run CJI3 for the month should be zero for sum of all costs
    Take the value of costs against the settlement cost element as that is the amount that should go to B/L account
    run FBL3N line item report to check if the cost have been transferred

  • AuC unsettled report

    Hello Experts
    There are mutiple AuC for which there is some unsettled line items and settled line items.
    I want to know, if there is any standard report, which will give list of unsettled line items in any AuC master
    Meena

    Hi Meena,
    You can check the report S_ALR_87012058.
    Regards,
    Mukthar

  • Standard report for Open Orders & JIT lines

    Hi,
    I need a standard report that will list out all open Purchase Orders and All Open JIT lines for a Supplier for Perticular plant.
    Is there any standard report that can pull this data.
    Regards
    Sandeep

    Use ME2M / ME2N  and ME2L reports with selection parameters WE101 and scope of list EINT

  • Edit font size standard report

    Hello community,
    I try to edit the font size of a standard report but I can't find any menu within APEX to edit this reports.
    I also tried to edit it within the SQL with '< f o n t s i z e=130%">' || ... || '</ f o n t >' but this did not work.
    Can anybody help me? Is there a menu which lists all the standard reports and where is the chance to edit this?
    Or is there any other chance?
    Thank you so much,
    Lisa :-)

    Hi Lisa,
    The font is defined in the style sheet (css file) that is referenced in the Page Template. You can override the style by adding your own style (with the same name as used by the columns in the report - you can check that using Firefox+Firebug or the Developer Tools in Chrome) after the APEX standard CSS. You can also put this CSS in your Report Template or in your Page (if it's only for one specific page).
    A good practice is not to include CSS or HTML in your SQL query. Because SQL is logic and HTML/CSS is presentation and these two shouldn't be mixed up.
    Roel

  • How to add new fields to standard reports

    hi friends,
                 im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
    for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
    append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
    ?when we check the standard rewport codes...there are lot of include statements perform statements etc  ...how to find out the final structure or internal table which has the output values..???

    hi
    it would be better if u giv full name of the report
    if ur displaying the data in alv then search for the
    word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
    then check the data that is comming into
    try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
    if ur displaying the data using write statement
    then create a zprogram and add a write statement
    fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
    shiva

  • How to add additional fields to zreport which contains standard report code

    Hi Experts,
    In order to add additional fields to standard report i copied the code into zreport but i am unable to  add additonal field into report because the code is looking so complex.
    standard report:AQZZ/SAPQUERY/FKF1============
         or
    sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
    Additional feilds to add is :Region,company code,country
    Please let me know how toidentify ALV and guide me how to solve this.
    Regards,
    naresh.

    Hello Naresh,
    First check whether these three fields are available in the text elements area.
    Please write your code in the subroutine %comp_ldesc.
    Repeat the code for your three new fields
    perform ldesc(rsaqexce) using 'G00010000X010       00  A1'
        %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
      read table %textpool_langu into %textpool_langu_line
                                 with key ID = 'I' key = 'A01'.
      if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
      else. %txt1 = %txt_unknown.
      endif.
    So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
    I think this is enoogh.
    Please update if you got the solution, which will be informative for others.
    regards,
    Antony Thomas
    Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

  • Reading values from standard report in custom report dynamically

    Hello Gurus,
    I have a strange requirement, We have some standard reports which displays output in drop down blocked data. I want to create a custom report which will get that data in my internal tables.
    Just to elaborate this requirement, I will give you a example:
    I have a standard report which output as first line 'A' and second line as 'B'. Now when I press drop down in 'A', it displays line items say 1,2,3,4,5.... Similarly block 'B' once when pressed displays line items 6,7,8,9,10.
    Here I want a custom report which directly read data from this standard report and gives us the values of line items 1,2,3,4,5 in one internal table and similarly items 6,7,8,9,10 in another internal table.
    Hope the question clarifies the requirement now.
    Request you to please provide the resolution.
    Thanks,
    Harjeet

    Hi Harjeet,
    Use sumit statement for standard program and export the list to  memory. and then read list from memory and use in your custom program.
    Use below code for reference.
    DATA: t_list TYPE abaplist OCCURS 0.
    SUBMIT rfdopr10
                    ************** your options
                    AND RETURN
                    EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject       = t_list
      EXCEPTIONS
        NOT_FOUND        = 1
        OTHERS           = 2.
    BR,
    Vijay

  • Standard report on vendor payment

    I want a standard report on payment discrepancy and balance payment to vendor. Can sombody suggest ?

    Use Transaction Code   S_ALR_87012078
    After Executing this report u can selcet filed Account & Net Due from Layout
    Then Subtotal on Account ( Vendor ) , U can get report of due amount for 0,30,60,90 & so on & also u can get Not due amounts
    Regards,
    Umesh

  • Purchase Order Standard Report

    Dear Experts,
    I am new to MM module.
    I want a standard report which can display purchase order report.
    Please help me. Its important.

    Hi Charan,
    This is a forum about certificaiton. So please start a new question in the application forum, I assuem in your case you could post in SCM forum.
    B.R. Jenny

  • Standard report on purchase order and bank details

    Respected all
    I need a standard report in which i could get purchase order number , internal order number , vendor name , invoice number , cheque number , cheque amount     and      cheque date .
    Is there any standard report available? your replies are highly appriciated.
    thanking you
    abhay

    try MC.A
    Please search before asking, even in your menu structure.
    There are binocluar icons in your SAP Easy access screen to search in the menu.
    Or enter SEARCH_SAP_MENU in the ok-field and search for transactions.

  • Line Item Not dispaying in Payment Advice standard report

    Hi Experts,
    I have cleared line items of a vendor by making payment through F-53 and subsequently generated the Print Form spoon request through FBZ5. But in the print, line items (cleared Items) doesn't display in Payment advice report. But for the Fiscal Year 2009 line items (Cleared item) was displaying in the Payment Advice report which is now not displaying.Since it is a standard report no changes made. So please suggest how to achieve it.
    Thanks in Advance,
    Arabinda

    Hello,
    In tr. F-53 you post a payment document,
    but to print a check you need to use some check printing program.
    SAP-delivered program is RFFOUS_C and it processes only
    one bank line per payment document.
    Please check the following general information:
    The standard form (of the print program RFFOUS_C) prints the invoice
    items followed by the check.  If the item details overflow to the next
    page, then the first check (eg cheque no. 1) will be voided and you'll
    get the valid cheque on second page (eg cheque no. 2). This is standard
    functionality.
    Also I would request you to recheck your customising in FBZP i.e.
        -> Click on the 'Payment methods in company code' button
        -> Double click on the appropriate 'Pymt meth.'
           -> Click on the 'Pyt adv. ctrl' button
              ¦ Note to payee lines on the form  /               ¦
              ¦                                                  ¦
              ¦ O  restricted to                       98 Rows   ¦
              ¦ O  None                                          ¦
              ¦ O  as many as req                                ¦
              ¦__________________________________________________¦
    - The first option will restrict the number of lines on the form to a
    value from 1 to a maximum of 98.
    - The second option will restrict the number of lines on the form to
    zero.
    - The third option option will not restrict the number of lines on the
    form.
    You may test in the system which among the three options will suit your
    needs. There is a documentation available at the side of each button.
    Also please check whether the problem happens with the standard SAP
    program. You may wish to review the documentation for RFFOUS_C via
    transaction SE38 -> Enter program name -> Select 'Documentation' radio
    button -> Display -> scroll to 'Setting up and changing the SAPscript
    forms (layout sets)'.
    Also you can refer to the parameter `No form summary section' in the
    variant of RFFOUS_C. By setting this indicator, you can prevent the form
    summary section from being printed hence the overflow is avoided and
    thus eliminates the voided check issue. Please refer to F1 Help of this
    field for further information.
    Also please refer to the F1 help on the indicator "Indicator: Do not
    Void any Checks" in the selection screen of payment program RFFOUS_C.
    I hope this helps.
    BR,
    Raquel

  • Standard  report(for open PO order items) with estimated Delivery dates

    hi friends
    i would like to know if there is any standard  report(for open PO order items) with estimated Delivery dates on it.
    thanks
    alahari

    ME2M (by material)
    ME2L (by vendor)
    ME2N (by number)
    Use selection parameter WE101 for open GR
    and scope of list EINT (scheduling lines)

  • Standard report  for unit of measures

    Is there any standard report to see the Fert material unit of measures  and its alternate unit of measures.

    HI
    there is no standard reprot for you requirment.
    only UOM of material you canget from MM60.
    but if you want alternate also got with table data MARM
    1.use SE16-- enter the table name MARM
    2.enter the material(field MATNR), and execute you get the report
    -ashok

Maybe you are looking for