Auch beim leztzten Bridge Update bestehen Cach Probleme fort

Ich dachte, dass mit dem neuen Bridge Update das Cach Problemn endlich gelöst würde. Dem ist aber nicht so: Nach einigen Bilder, die ich aus Bridge heraus in Photoshop bearbeitet hatte, wurden die geänderten JPGs nicht mehr neu eingelesen, auch das Änderungsdatum wurde nicht aktualisiert....

Similar Messages

  • Bridge purge central cache problem

    I keep getting an error message saying bridge encountered a problem and i should purge the central cache in cache preferences. I'm not sure if I'm doing it right but it's not working and continues with this error message every time I open it. Any suggestions?

    Any suggestions?
    Try posting on the Bridge Forum.

  • Bridge update does not fix caching problems.

    Dear Adobe,
    The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
    I originaly reported the problem here on May 16, 2012.
    http://forums.adobe.com/thread/1007560
    At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
    I've since tracked several other reports of this bug and related cache problems.
    I assume that, at best, we will have to wait another 6 months or more for the next update. How can I assure this bug will be addressed?

    redcrown on guard wrote:
    The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
    At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
    Thank you for this bit of information. Maybe it means I can stop the deactivations/uninstall/reinstall/reactivate cycle to try yet another solution. And hopefully, this will stop the re-caching problem with other than tif files.
    regards
    *S*

  • Immer wieder Cach Probleme in Bridge

    Hallo,
    ich habe immer wieder Cach Problem, obwohl ich den Cach mittlerweile in das Verzeichnis exportiere. Habe gestern gerade den Cach geleert und für 1800 Bilder neu eingelesen. Heute nun wieder das selbe: Das Suchen nach Bilder mit einer bestimmten Bewertung war nach einiger Zeit nicht mehr möglich.
    Langsam frage ich mich, ob Bridge überhaupt das richtige Tool dafür ist, denn diese andauernden Cach Probleme in Bridge haben mich schon Tage an Zusatzarbeit gekostet.
    Für Hinweise wäre ich sehr dankbar.
    Gruß
    Claus Tropitzsch

    Zuerst hatte ich das hier bereits beschriebe Problem mit dem immer wieder erneuten Drehen von Hochformat Fotos. Eines war dabei, welches schließlich sogar spiegelverkehrt war. Ich habe deshalb mittlerweile diese Bilder aus Digitalkameras als schreibgeschützt, was das Arbeiten sehr erschwert.
    Neuerdings ist jetzt scheinbar der neu erstellte Cach so defekt, dass die Suchfuntkion nicht mehr geht und es kommen auch Meldungen, dass die Datenbank defekt sei. Ich wußte nicht, dass da eine DB dehinter steht. Da hilft dann nur Zentraler Cach bereinigen. Dabei gehen dann aber auch bei JPGs ein Teil der Bewertungen verloren (hauptsächlich die mit 2 und 3 Sternen).

  • I am having trouble with the cache in bridge.  When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation.  I did that but now when I try to get to the folders where my p

    I am having trouble with the cache in bridge.  When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation.  I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work.  The message appears "building criteria" and I get an endless loop on the lower left panel.  How do I correct?

    You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

  • When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem.

    When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem. The solutions given by Adobe don't help me. Does anyone have another solution....????
    Als ik Bridge open krijg ik een venster te zien met de boodschap: Er is een fout opgetreden in Bridge waardoor de cache niet kan worden gelezen. Probeer de centrale cache te wissen in de cachevoorkeuren om de situatie op te lossen. De oplossingen van Adobe verhelpen het probleem niet, heeft iemand anders een oplossing .....????
    Alvast bedankt. Jaap Wals.

    When launching Bridge, press and hold down Command-Option (Mac) or Control-Alt (Win) + Shift to choose “Reset Preferences”, Purge Entire Thumbnail Cache”, and/or Reset Standard Workspaces”.

  • Bridge CS6 Cache problem

    Have installed Photoshop CS6 and in using Bridge I get the message "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation". If purge the central cache as instructed, on the start up of Bridge I get the same message and are unable to use Bridge.
    I am on a Mac using OSX 10.7.4
    Your help will be appreciated

    "Removing the Cache manual is fast, you only need time to rebuild cache,
    but that is something you can do with one click on the button an let it
    run overnight."  How do I do that?
    The path provided is for a Mac, there should be a similar path for Windows, maybe Curt can provide you this. The principals stay the same, you quit bridge, dump the cache file manual, restart Bridge (builds a new, empty but fresh cache folder) and when you point Bridge to a folder it start building the cache according your settings (ACR, HQ preview etc.)
    If you have a lot of subfolders just select the main folder, use the menu view / show items from subfolders and this means your main folder shows all the content of your subfolders in the content panel.
    This takes a while and according to your amount of files and file size as well as processor speed it can take several hours before it is finished. For best practice start this procedure as 'last of the day', leave your PC on for the night and let Bridge do its job. It takes a lot of resources and time for Bridge to cache so if it is the only task your PC has to do the better it will do it

  • PS6 Bridge cache problem

    work with an Imac, version Moutain Lion 10.8.2 and with PS6.
    I get this message when opening PS6 Bridge, see upper section of the annex. If I click Ok pressure I can continue working.Don't know what good that cache content and for which this actually serves. have already emptied via preferences cache cache, this problem is not yet solved.   Can some one help me whit this problem.
    Translate the error message
    "There was an error in Bridge causing the cache cannot be read. Try to clear the cache in the Central cache preferences to resolve the situation."
    I hope this is a correct translate, my English is not super , sorry.

    for the moment I think the problem is solved now.    
    Thanks to "Curt Y

  • Adobe Media Encoder CS6 6.0.3-Update Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Adobe refuses support. I've paided for the product but they don't care

    Adobe Media Encoder CS6 6.0.3-Update
    Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Zeitpunkt. Fehlercode: U43M1D204

    Ja wie gesagt es hat davor auch ohne Probleme Funktioniert nur war ich gezwungen das System neu zu Installieren und ab dann konnte ich die da oben genannten Updates nicht mehr Installieren. Ein Mac ist zwar eine schöne Sache kommt aber für mich nie in Frage da ich mein PC als Arbeitsrechner und Gamer Rechner nutze und das meiste läuft halt nicht auf einen Mac und man müsste manche Programme neu Kaufen, das sehe ich überhaupt nicht ein, und meine Anwendungen werden aus Prinzipien nicht für Apple Produkte entwickelt da verdient man kaum etwas... aber das muss jeder für sich entscheiden. An eine neue Version habe ich eventuell nächstes Jahr gedacht aber auch nur die CS6 ob man das brauch ist die Frage da CS 5 genau macht was es soll. Das Modell mit der Adobe Cloud hat zwar denn Vorteil das die Programme Aktuell sind aber man muss Monatlich dafür Zahlen und CS5/CS6 oder älter brauch man nur einmal Kaufen. Darüber hinaus finde ich eh das Adobe so eine richtige S*** ist wenn es um Support ältere Programme geht so zeigt Adobe meiner Meinung nach das Ihre Produkte nichts wert sind zumindest macht es den Anschein. Aber wie gesagt, bin ich hier um Hilfe zu bekommen um das Problem zu lösen ohne ein neue Version zu kaufen, das ist ja bekanntlich die einfachste Lösung, aber wenn Informatiker auch so denken würden dann würde es sehr schlecht aussehen... und als Anmerkung am Rande, es wäre ja nett wenn man mir denn Link dieser Updates zukommen lassen könnte um die Updates Manuell zu Installieren.
    "Aber wie sollen wir denn Programme testen auf Hardware und OS, die es erst in ein paar Jahren geben wird."
    Dies kann man in voraus natürlich nicht aber in nachhinein geht das und Software Entwickler denn etwas an Ihre Produkte liegt, machen das nachhinein auch und passen gegebenenfalls Ihr Produkt an.
    PS: CS 2 läuft ebenfalls auf einem Windows 8.1 rechner ;-)

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • I am facing a caching problem in the Web-Application that I've developed us

    Dear Friends,
    I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet.
    Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch the data (using DAO layer) and will store in the session. After this the servlet will forward the request to the view JSP to present the data. The JSP access the object stored in the session and displays the data.
    However, when the link is clicked second time then the request is not received by our servlet and the cached(prev data) page is shown. If we refresh the page then request come to the servlet and we get correct data. But as you will also agree that we don't want the users to refresh the page again and again to get the updated data.
    We've included these lines in JSPs also but it does no good:
    <%
    response.setHeader("Expires", "0");
    response.setHeader("Cache-Control" ,"no-cache, must-revalidate");
    response.setHeader("Pragma", "no-cache");
    response.setHeader("Cache-Control","no-store");
    %>
    Request you to please give a solution for the same.
    Thanks & Regards,
    Mohan

    However, when the link is clicked second time then the request is not received by our servlet Impossible mate.. can you show your code. You sure there are no javascript errors ?
    Why dont you just remove your object from the session after displaying the data from it and see if your page "automatically" hits the servlet when the link is clicked.
    cheers..
    S

  • Qaaws not refreshing query triggered from Xcelsius, maybe a cache problem

    Hi,
    I'm having a problem with QAAWS and Xcelsius
    I'm using a List Builder component to select multiple values in this case STATES from the efashion universe
    I use the selected states as values to feed a prompt in a QAAWS query, the qwaas query has  the SALES REVENUE as the resultset and in the conditions it has a multi prompt for STATES
    When I preview my dashboard, I select the States, then UPDATE the values and then refresh the query with a CONNECTION REFRESH button, The first time I do this it works fine and returns the Sales revenue.
    If I add a new State to my selection and then run update and run run again the query with the refresh button, it doesn't work any more and it shows again the value retrieved from the first query
    First I thought that the query wasn't triggered by Xcelsius, but by doing some more tests I found that actually the query runs but it returns the value from the first query
    I think this is a cache problem , so is there a way to tell QAAWS to always run the query and not use the cache?
    thanks,
    Alejandro

    Hello Alejandro,
    QaaWS indeed uses a cache mechanism to speed up some Xcelsius interactions (from XI 3.0 onwards), but your issue should not be induced by this, as cache sessions are discriminated according to session user id & prompt values, so if you are correctly passing prompt values, QaaWS should not serve you with the previous values by error.
    Could you specify how you are passing several prompt values to the QaaWS? There might be an issue there, so make sure that:
    1. QaaWS query prompt is set using In List operator, otherwise only first value will actually be taken into account,
    2. In Xcelsius Designer Data Manager, web service input paremeters are duplicated to accept several input values (you cannot submit you list of prompt values as a list to a single input parameter).
    If this still does not work, I'd suggest you debug your dashboard runtime using an HTTP sniffer like Fiddler (available from http://www.fiddler2.com/) which enable you to inspect the sent & recieved HTTP messages with the server, where you should verify which prompt values are sent to the QaaWS servlet.
    FYI, you can set the QaaWS cache lifetime for each query, by going into QaaWS edition first wizard screen, click Advanced... button and change value for timeout parameter (default is 60 seconds)
    Hope that helps,
    David.

  • Beim cs2 bridge geht camera raw nicht

    beim cs2 bridge geht camera raw nicht

    In Ergänzung zu Willis möchte ich anmerken, dass Camera RAW zu Anfang wirklich nur für RAW-Daten vorgesehen war (daher auch der Name) und deshalb keine Beabeitung von JPGs und anderen Dateien möglich war. Erst mit späteren Versionen wurde die Bearbeitung anderer Bildformate nachgelegt.
    Gruß
    Bernhard

  • Crash when updating site cache?  MM_Username1?

    Hi,
    All of a sudden, tonight, DW8.0.2 will no longer open or load
    one of my
    sites, crashing when "Updating Site Cache". The site is ASP
    linked to an SQL
    database.
    Checking the file that the cache gets to, I notice that the
    problem file is
    within a sub-directory of the site, called "/admin". Thing is
    though, it's
    not always the same file, but it IS always a file within the
    /admin
    sub-directory.
    Within this sub-directory I altered, by hand, the Login User
    code and
    Restrict Access to Page code to create and use the session
    variable
    MM_Username1 as opposed to the default MM_Username.
    Could this be the reason for the sudden trouble with the site
    cache? I am
    puzzled because the site was working fine for a few weeks
    now, with this
    sub-directory included, and I didn't create the MM_Username1
    issue today
    either, it has also been working fine for a good few weeks
    now. I've also
    not added anything new to the site, that I am aware of.
    When I remove the sub-directory from the site, the Updating
    Site Cache works
    fine, so I am 100% sure there is a problem with the files
    within this
    sub-directory. How will I know which one though?
    I've tried this, as recommended by Adobe, but I still get a
    freeze-up when
    re-creating the cache:
    1. Try renaming the Dreamweaver user configuration folder, so
    that
    Dreamweaver will automatically generate a new user
    configuration folder the
    next time Dreamweaver launches. The Configuration folder is
    located here:
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration
    2. Recreate your Dreamweaver user settings in the registry as
    follows:
    Launch the Registry Editor by clicking the Start button,
    choose Run, then
    type "regedit". In the Registry Editor, navigate to this
    folder:
    HKEY_CURRENT_USER\Software\Macromedia\Dreamweaver 8
    Rename the "Dreamweaver 8" key to "DreamweaverOLD", so that
    Dreamweaver will
    automatically generate a new user settings key the next time
    you launch it.
    3. Recreate your Dreamweaver site definitions in the registry
    as follows.
    The steps below will delete your site definitions in
    Dreamweaver.
    4. Launch the Registry Editor by clicking the Start button,
    choose Run, then
    type "regedit". In the Registry Editor, navigate to this
    folder:
    HKEY_CURRENT_USER\Software\Macromedia\Common\8\Sites
    Rename the "Sites" key to "SitesOLD", so that Dreamweaver
    will automatically
    generate a new Sites key the next time you launch it.
    Any further advice?
    Regards
    nath.

    Found it! Jeesh.
    I had a querystring value in my UPDATE redirect URL which was
    coded
    incorrectly!!!
    I am frustrated that, rather than just highlighting the error
    or, at the
    very least, producing an error when opening the specific
    file, this type of
    thing crashed the entire DW programme.
    The time I spent in Notepad today changing MM_Username1 back
    to
    MM_Username!! Turns out that was nothing to do with it.
    <groan> Yeah,
    that's right, laugh it up! :o)
    Anyway, solved now. A misplaced ", %, ), (, <, >, &
    etc can cause you no
    end of grief! :o(
    Nath.
    "tradmusic.com" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hi,
    > All of a sudden, tonight, DW8.0.2 will no longer open or
    load one of my
    > sites, crashing when "Updating Site Cache". The site is
    ASP linked to an
    > SQL database.
    > Checking the file that the cache gets to, I notice that
    the problem file
    > is within a sub-directory of the site, called "/admin".
    Thing is though,
    > it's not always the same file, but it IS always a file
    within the /admin
    > sub-directory.
    >
    > Within this sub-directory I altered, by hand, the Login
    User code and
    > Restrict Access to Page code to create and use the
    session variable
    > MM_Username1 as opposed to the default MM_Username.
    > Could this be the reason for the sudden trouble with the
    site cache? I
    > am puzzled because the site was working fine for a few
    weeks now, with
    > this sub-directory included, and I didn't create the
    MM_Username1 issue
    > today either, it has also been working fine for a good
    few weeks now.
    > I've also not added anything new to the site, that I am
    aware of.
    >
    > When I remove the sub-directory from the site, the
    Updating Site Cache
    > works fine, so I am 100% sure there is a problem with
    the files within
    > this sub-directory. How will I know which one though?
    >
    > I've tried this, as recommended by Adobe, but I still
    get a freeze-up when
    > re-creating the cache:
    >
    > 1. Try renaming the Dreamweaver user configuration
    folder, so that
    > Dreamweaver will automatically generate a new user
    configuration folder
    > the next time Dreamweaver launches. The Configuration
    folder is located
    > here: C:\Documents and
    Settings\<username>\Application
    > Data\Macromedia\Dreamweaver 8\Configuration
    >
    > 2. Recreate your Dreamweaver user settings in the
    registry as follows:
    >
    > Launch the Registry Editor by clicking the Start button,
    choose Run, then
    > type "regedit". In the Registry Editor, navigate to this
    folder:
    > HKEY_CURRENT_USER\Software\Macromedia\Dreamweaver 8
    > Rename the "Dreamweaver 8" key to "DreamweaverOLD", so
    that Dreamweaver
    > will automatically generate a new user settings key the
    next time you
    > launch it.
    >
    > 3. Recreate your Dreamweaver site definitions in the
    registry as follows.
    > The steps below will delete your site definitions in
    Dreamweaver.
    >
    > 4. Launch the Registry Editor by clicking the Start
    button, choose Run,
    > then type "regedit". In the Registry Editor, navigate to
    this folder:
    >
    > HKEY_CURRENT_USER\Software\Macromedia\Common\8\Sites
    >
    > Rename the "Sites" key to "SitesOLD", so that
    Dreamweaver will
    > automatically generate a new Sites key the next time you
    launch it.
    >
    > Any further advice?
    > Regards
    > nath.
    >

  • Cannot update local cache 0

    After upgrading to Netweaver7.0 SP15 we started getting these errors messages in the portal defaultTrace logs.
    [EXCEPTION]
    #1#com.sap.bc.proj.jstartup.sadm.ShmException: Cannot update local cache 0.
            at com.sap.bc.proj.jstartup.sadm.ShmCache.nativeGet(Native Method)
            at com.sap.bc.proj.jstartup.sadm.ShmCache.onGet(ShmCache.java:412)
            at com.sap.engine.core.cache.impl.ShmMonitor.onGet(ShmMonitor.java:114)
            at com.sap.engine.cache.admin.impl.LocalMonitor.onGet(LocalMonitor.java:296)
            at com.sap.engine.cache.core.impl.CacheGroupImpl.get(CacheGroupImpl.java:575)
            at com.sap.engine.cache.core.impl.CacheGroupImpl.get(CacheGroupImpl.java:622)
            at com.sap.ip.bi.base.service.cache.impl.CmlCacheService.get(CmlCacheService.java:227)
    It doesn't appear to be a fatal error but it gets logged constantly when users access BI iViews (Bex, Bex Web Analyzer, etc). We've been running like this for a couple of weeks. Last night the server ran out of shared memory. Restarting Oracle and SAP BI cleared up the problem for now. Any number of things could have caused that problem but this error appears to be related to shared memory (ShmCache).
    We've been unable to locate any information about this exception. Any help would be greatly appreciated.
    Regards,
    John

    Hi John,
    We're getting the same problem.  Were you able to resolve it?
    Thanks,
    Regards
    Mel Calucin
    Bentley Systems

Maybe you are looking for