Auction status error

Hi everyone,
We have an issue with the status of an auction. The status is not automatically updated. For example, we create an auction which starts at 10am and finishes at 12pm. Before 10am, the status is "Published" and continues with that status even if is 11am and only it changes to "Active" when the purchaser or the bidder enter in LAC. If we close the LAC before the end date (for example 11:30am), the auction still has the status "Active" even after the end date (for example 1pm) and only when we enter again in LAC the status change to "Ended".
Do you know what could be the problem?
Thanks,
Ivá

Hi,
My issue was solve. We have to adjust the system time.
Regards,
Ivá

Similar Messages

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Material statuses error message should go after entering Trackin No in PO

Hi All,
I have created one Material statuses with error message, I have created material with the use of that material statuses..
Its working fine,At the creation of PR, PO I'm getting that Error message..
My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
Is it possible?? how to do it?? plz help me...
Is it possible in standard SAp???
thanks and regards
rames reddy

Hi,
You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
And then assign field selection key to PO Document type and save.
SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
The same you can do for PR document type by having a field selection key for PR document type.
Regards,
Biju K

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

Time machine backup error OS Status error 2

Time machine has been backing up to newly replaced Time Capsule with no Time Machine issues until today.
There have been a few Time Capsule 'amber flashing light' moments, solved with a reset.
But after one such reset this morning, despite the green light being steady, the error message stated in the title above has appeared.
Time capsule is visiblle and properly configured, according to Airport Utility.
On the menu bar, the Tme Machine logo is grey, and states "Time Machine is not configured".
In the Time Machine preferences window, have re set the Time Capsule as the backup disk (several times).
Time Capsule green light is on, and I can hear it whirring into action when I select it as back up disc.
The complete message reads:
Time Machine can’t access the backup disk “(my name) Time Capsule”. Time Machine backup OS status error 2.
I am Running OSX 10.6.7
Time Capsule 1 TB
Less than one month old, and the second time calsule replacement form Apple.
Can anyone please shed any light on this?
Many thanks
Lorraine

Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
See this post (Major Dude) that is in the More Like This section:
Time Machine and ReadyNAS Duo

Media encoder status error CS4

I cant get my CS4 projects to encode!
Media encoder gives me a status error. (yellow triangle in the status column) When I open the text file I get:
- Source File: C:\Users\Andrew\AppData\Local\Temp\denis final CS4_1.prproj
- Output File: E:\Sequence 01.wav
- Preset Used: Windows Waveform 48kHz 16-bit
- Video:
- Audio:
- Bitrate:
- Encoding Time: 649:51:33
8/25/2009 9:10:49 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Other info:
-Vista 64bit,
-Adobe creative Suite CS4. Premiere CS4 4.1.0
-It wont encode anything, I've tried a few projects, the above one was an export of audio timeline.
-The project "denis final CS4.prproj" is actually in my "E:" drive
-A renamed project called "denis final CS4_1.prproj" (created by CS4 I assume) does in fact exist in "C:\Users\Andrew\AppData\Local\Temp\"
-I am unable to deactivate Premiere CS4 . It allows me to deactivate successfully, but comes up active next time I run.
Any ideas?
thanks,
Andy

Here's what I get after a few minutes of being in the encoder. Nothing actually starts encoding:
- Source File: /Users/user/Library/Caches/TemporaryItems/Wedding.prproj
- Output File: /Users/user/Video/Projects/Wedding/DVD/_Wedding.mpg
- Preset Used: Export Widescreen DVD 7Mbps CBR
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:19
Sun Dec 20 15:56:11 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Is there an error code in there?

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

Receiving a continuous status error with the FP1600 module.

I have 3 banks of terminals. All three banks use a FP-1600 module as the network interface. All three banks operate when I power the modules. However, after roughly 15min to a half hour, bank number 1 experiences a continuous red blinking status error, followed by total communication loss to Labview (there is still power to the terminal). The only way to re-establish communication is to cycle the power. This bank contains 3, AO-200 modules; 1, AO-210 module; 2, AI-111 modules; 1, AI-110 module, and 1 RLY-420 module. All modules are powered the same, and the others have never lost communication.

Prashant,
I would contact the National Instruments support by phone, as you may need to return the FP-1600 for repair.
http://sine.ni.com/apps/we/niae_asc.main
Communication Methodhone NI
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

SRM PO Status "Error in Process"

Hi,
SRM 3.0 Extended classic scenario
EBP Purchase order goes in to Status "Error in process" after making some ammendments.
Getting following error
1) EEP\Business to Business Procurement(100)\...\Purchase Order\Backend application errors
2)Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE PurchOrder xxxxxxxxxx: Please specify a valid account assignment
3) Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE Purchase order xxxxxxxxx: Instance xxxxxxxxx of object type PurchaseOrder c ould not be changed
Can you please suggest what are the setting i need to check, actuallly the changes is not reflecting in to backend.
Thanks,
Jairaj

Hi,
Thanks for reply,
It is a service purchase order and changes made to them is delete and undelete the service line items not updating in to back end,
below is details fo error log.
1) javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Pleasespecifyavalidaccount+assignment&PARAM4=BBP_PD_PO_TRANSFER_EXEC&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283846&alert_ALINDEX=0000001660&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=PurchOrder 6500010389: Please specify a valid account assignment&CTR_URL=test1', 'tools')
2. javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Instance6500010389ofobjecttypePurchaseOrderc&PARAM4=ouldnotbe+changed&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283847&alert_ALINDEX=0000001659&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=Purchase order 6500010389: Instance 6500010389 of object type PurchaseOrder c ould not be changed&CTR_URL=test1', 'tools')
Please advice.
Regards,
jairaj

I am getting 404 status error

hi,
I am new to java.I am getting 404 status error each time i execute this:
http://localhost:8084/sru/showname.jsp.I didn't face any problem with servlets but i
am facing a problem with jsp's.could anyone suggest as to what i could do.
I did set the Java_Home to c:\java\jdk1.5.0_01\.I am using tomcat.
Edited by: srujan on Mar 17, 2008 7:43 AM
Edited by: srujan on Mar 17, 2008 7:45 AM

Thanks for the reply.
I did all the above.I have given the following in web.xml file:
<servlet>
<servlet-name>showname</servlet-name>
<servlet-class>showname</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>showname</servlet-name>
<url-pattern>/showname.jsp</url-pattern>
</servlet-mapping>
and in the browser i have given as:
http://localhost:8084/sru/showname.jsp
still i get the same error.
the jsp example files(that come with tomcat) run well.

StartJAVA was executed with status ERROR

Hi People.
I am installing SAP Netweaver 7.0 SR3 AS JAVA, in Linux RH5 with Oracle 10 and JAVA 1.4.2 IBM.
The problem in the installation is when I tried to install the CI. The installation fail when tried to start de JAVA VM.
The LOG DEV_DISPATCHER is:
[Thr 1123465536] Wed Nov 11 12:08:32 2009
[Thr 1123465536] JLaunchISetState: change state from [Starting (2)] to [Stopped (6)]
</verbosegc>
[Thr 1111980352] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1111980352] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1111980352] JLaunchCloseProgram: good bye (exitcode = 0)
DEV_SERVER0:
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1081338176] Wed Nov 11 12:08:30 2009
[Thr 1081338176] JLaunchRequestFunc: receive command:17, argument:0 from pid:30225
[Thr 1081338176] JLaunchIShutdownInvoke: set shutdown interval (stop:1257952110/end:1257952230/TO:120)
[Thr 1081338176] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 1081338176] JHVM_FrameworkShutdownDirect: invoke direct shutdown
</verbosegc>
[Thr 1108367680] JLaunchIExitJava: exit hook is called (rc = 999)
[Thr 1108367680] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 1108367680] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1108367680] JLaunchCloseProgram: good bye (exitcode = 999)
And the log of Installation is:
TRACE      2009-11-11 12:08:12.823 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 4037
ERROR      2009-11-11 12:08:13.873 [sixxcstepexecute.cpp:951]
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Somebody Help me?
Thanks...

Hi.
The sapinst.log is:
INFO 2009-11-11 17:29:49.025
State of instance EPP/JC01 changed from Java: (dispatcher: STARTING, server0: STARTING) to Java: (dispatcher: STARTING, server0: STARTING).
ERROR 2009-11-11 17:29:49.027
CJS-30153 Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2009-11-11 17:29:49.755
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
Tha sapinst_dev.log is:
TRACE      2009-11-11 17:29:49.027
Function setMessageIdOfExceptionMessage: nw.progress.startupProcessFailed
ERROR      2009-11-11 17:29:49.027
           CJSlibModule::writeError_impl()
CJS-30153 Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
TRACE      2009-11-11 17:29:49.28 [iaxxejsbas.hpp:483]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE      2009-11-11 17:29:49.142 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 25736
TRACE      2009-11-11 17:29:49.265 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 25737
ERROR      2009-11-11 17:29:49.755 [sixxcstepexecute.cpp:951]
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:752]
            CGuiEngineImp::showMessageBox
TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
The others logs are attached in the first Post.
The phase of the error is in StartUP Java VM, before of the installation of Java Components.
Thanks a lot.
Edited by: Esteban Gutierrez E. on Nov 12, 2009 1:38 PM

HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

Spool Request showing status 'Error'

Hi All
I m facing a problem in Spool generation. When spool requests are generated it goes to status 'Error' when i see it in SP01. I have checked the device status from SPAD and also spool processor from SM51.
What should i do now?
Thanks n Regards
Shashank

Hi
The output of log files is as follows:
SAP spool error log
=====================
Print request processing log
Errors occurred processing this print request
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
The operating system is reporting problems
File system full (file /usr/sap/<SID>/../data/000xJTYv.VRP)
Errors occurred processing this print request
Error during print request output. l_rc = 8
There may be no printout
Rgrds
Shashank

Auction status error

Similar Messages

Maybe you are looking for