Aud2 ZS platnm I get I/O from front panel, but no output from REAR OF CA

I had a Audigy2 in my Dell, worked fine. I needed MORE I/O ports. I got a Audigy2 ZS platinum for the front panel (extra I/O) front panel works fine, sound card sounds fine, all is well - except I get no output from the back of the card. (certainly this isn't a "front OR rear" sort of thing?)
About ready to return it.

I DO get digital output from the front and back (front panel on front of Dell) and back of card. I don't get ANALOG output from card. I thought I recall a selecti've click box in the software that said "digital only" where is that. (I HATE creatives software - SO MANY LITTLE UTIL PROGRAMS THAT DO LITTLE OR NOTHING EACH) you have to HUNT through them all to find the option you need.

Similar Messages

May i get service in india of iphone but purchased this from dubai?and i want to factory unlocked this iphone4 can i do?

may i get service in india of iphone but purchased this from dubai?and i want to factory unlocked this iphone4 can i do?

ipod touch 4g 64 gb wrote:
how to know that iphone4s is unlocked while buying from dubai?
Buy from a legitimate source. Get it directly from a supported carrier. NOT from a shop on the corner.

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

Chnaging input in a waveform graph from front panel in labview

Hi !
I am working with temperature sensors; I have several sensors to read simultaneously.
I want to plot information from different sensors in different plots and have the option to change/select the sensors in the a graph from front panel. For example, I have 8 sensors(please see the attachments_ front panel), A,B,C,D,E,F,G and M. Some time it could be possible that user want A,B,C in Tumor Graph or sometimes only A and B. That means the identity and the number of sensors could be changed in different times.
Now I connect only two sensors per graph (ref: block diagram) but the number and the sensors to be plotted in a certain graph can be changed, so How can I implement it ?
Any help or idea will be appreciated.
Best Regards,
Hasan Masud
CTH, Sweden.
Attachments:
random graph_front.jpg ‏260 KB
random graph_block.jpg ‏298 KB

Hi hasanma,
Well, you could expend the build array and add more inputs to it as shown below:
And individually select which sensor data the user wants to view as shown below:
Warmest regards,
Lennard.C
Learning new things everyday...

Midi in from front panel stopped working (x-fi platinum)

8midi in from front panel stopped working (x-fi platinum)" Not sure if I burned the connector or if something is wrong with the driver. My midikeyboard can't be used with sb x-fi platinum anymore.
I borrowed terratec soundcard from big brother a while and used my midikeybaord in with that and output with x-fi card. but now he's taken the terratec back.
and I'd like to really know what's wrong witht he midi in.
Does anyone know what might be the problem?
I have connected normal midi cable -> normalmidi to tiny x-fi port convertor -> front panel
This used to work a bunch of months ago.
i'm using winxp latest updates. i'm trying out reaper. I've got asio4all installed but i usually use directsound when I'm composing music.
tahnks for any help

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

HP OfficeJet J4680 All-in-One getting Copy error message when copying from front panel.

I get this message when I try to copy from the front panel: Incorrect paper size. Load different media or change copy paper size settings. It does not matter what I am trying to copy. I have checked the paper size and media and they are set on what I want -- Letter size and plain paper. It started after I cleared a paper jam from the back of the copier. Hope someone can help me. Thanks Klb

I am also having the exact same problem. I tried resetting it back to default settings (power on, unplug power cord, hold the # and 3 buttons while plugging back up). However, this has not helped. So far the only solution I saw is to upgrade to another printer, but copying seems to be such a simple function for this problem to be so hard so solve. Unfortunately, I've seen no other answers, so upgrading may be my only option even though I have no other problems :-(

No MIC on front panel, when using LineIn from the Ca

Hi
My TV Card ist connected at the lineIn FLexiJack at the Card. When I connect a Microphone into the FrontPanel of my Fatalty I only get the sound from the TV Card.
How can I use the Microphone?
Which switch do I have to move?

Go to the mixer and select the mic or mic or anything that represent the mic input from the front panel under the REC section.
PS:I don't own a X-FI so not sure the correct option name but it should work the same way as the audigy 2 zs.

Select from 4 tables but include data from 3 even if 4th is null

Hello -
I'm quite new to oracle and apex, but enjoying learning - but sometimes I need a gentle nudge to know what I need to learn about.
I have a select statement that works - selecting specific columns from 3 tables:
SELECT
"TERRITORIES"."TER_NAME" "TER_NAME",
"TERRITORY_TYPES"."TTP_DESCRIPTION" "TTP_DESCRIPTION",
"COUNTRIES"."CNT_DESCRIPTION" "COUNTRY"
FROM
"TERRITORIES", "TERRITORY_TYPES","COUNTRIES"
WHERE
"TERRITORIES"."TER_TTP_ID"="TERRITORY_TYPES"."TTP_ID"
and
"COUNTRIES"."CNT_TER_ID"="TERRITORIES"."TER_ID"
I want to add in a 4th table for, you guessed it, States.
However, many of the countries do not yet have states in the states table (and may never have any). Therefore, they do not appear in the results. I want them included in the query, so that I'll have the opportunity to add in the data via Apex.
Is there a phrase I can insert in the 1st query so that I'll get data for Territory Type, Territory and Country, even if the State table is null?
Or, do I need to insert records into the state table, such as: insert into states (state_ID, STATE_CNT_ID) values (state_seq.nextval,2). If so, do I just do that over and over, replacing the value? Or is this where I need to learn about bind variables? Or some other command?
Thank you-
Marion in NY
Edited by: mtpaper on Oct 24, 2009 12:54 PM
I FIGURED IT OUT! I DID IT! How do I mark myself as helpful???
insert INTO states
(state_ID, STATE_CNT_ID)
SELECT state_seq.nextval, cnt_id
FROM countries
WHERE not exists (select * from states where states.state_cnt_id = countries.cnt_id)
Edited by: mtpaper on Oct 24, 2009 1:10 PM

You certainly could insert data into the STATES table, but I generally wouldn't advise inserting rows into a STATES table for states that don't actually exist. It would seem to make far more sense to just do an outer join when you include the STATES table in your query
SELECT "TERRITORIES"."TER_NAME" "TER_NAME",
       "TERRITORY_TYPES"."TTP_DESCRIPTION" "TTP_DESCRIPTION",
       "COUNTRIES"."CNT_DESCRIPTION" "COUNTRY",
       s.state_name
FROM TERRITORIES t ,
       TERRITORY_TYPES tt,
       COUNTRIES c,
       states s
WHERE "TERRITORIES"."TER_TTP_ID"="TERRITORY_TYPES"."TTP_ID"
   and "COUNTRIES"."CNT_TER_ID"="TERRITORIES"."TER_ID"
   and c.cnt_id = s.state_cnt_id(+)The {noformat}(+){noformat} operator indicates that you want to do an outer join. So if there is no row in the STATES table that matches the join condition, a NULL is returned.
From a purely stylistic standpoint, I would generally suggest using aliases (i.e. the T, TT, C, and S in the FROM clause) rather than having to constantly write out all the table names. And I wouldn't suggest putting double-quotes around everything-- that forces all your identifiers to be upper case and case sensitive.
Justin

Is there a way i can restore my iPhone from a backup but everything apart from settings?

Is there any way i can restore my iphone 4S from a backup after restoring it from factory settings but not applying my previous settings? as parental controls have been added, but passcode is forgotten and i now need to keep all my stuff on the iphone but get rid of parental controls!!

You can't chose what to include/exclude with a restore, you can restore the whole backup (including settings) or not restore. I'm assuming that the passcode was on the iPhone when you last backed up, in which case (apart from remembering it) the only way to remove the code is to restore back to factory defaults.

My husband can't receive pics to his 4 from my 5S but he can from other 5S!

I Can send regular text messages to my husband but when I send a pic it gives me the message failed to send error. He can receive them from other people but not me.

This is a solution for duplicates
http://osxmactips.blogspot.com/2009/01/delete-duplicate-iphoto-photos.html
or use a specialized software, Duplifinder
http://www.haystacksoftware.com/duplifinder/
Advanced user tips ... but first backup your iPhoto library
If you want to get rid of your original photo files and leave them in iPhoto, thus freeing up much hard drive space, you can use these commands in Terminal:
mkdir ~/.Trash/iPhoto-Originals
cd ~/"Pictures/iPhoto Library/Modified/"
find . -type f -exec mv "../Originals/{}" ~/.Trash/iPhoto-Originals/ \;
Type these commands carefully and it should work!

Will the Ipad power adapter operate safely from the modified sine-wave output from a 12VDC-240VAC inverter?

Will the power adapter for the Ipad Air operate safely on the modified sine-wave output from a 12 VDC-240VAC inverter?

I am not sure why you want to do that...the power adapter takes 100-240 volts AC at 50-60 Hz and converts that to 5 to 5.1 volts DC at about 2 amps. Why are you inverting 12 VDC to 240 VAC then back to 5 VDC?
It should handle that easily, but seems like a long round about way of getting there.

HP OFFICEJET 6500 709A WILL NOT SCAN FROM FRONT PANEL ON MACHINE os windows 7 what must be done?

I have an oj 6500 709a all in one that will not scan when I press the scan button on machine.I have doown loaded all the updates and drivers.what must be done ?

Hi z5090joe,
Thanks for the response!
We can check a few other things, since the scan communication itself seems to be working okay, just not from the front of the printer. I'd like to check the Scan Settings on the front panel with in the HP Solution Center.
Once you're in the HP Solution Center, please click on Settings along the bottom, click Scan Settings, then click Scan To... Setup.
You will then see a screen that has Available Scan Shortcuts on the left and Front Panel List (Scan To button) on the right. If there are no options on the right, please add the scan options you'd like from the left side by clicking on it and then clicking the Add button in the middle. If you add one by mistake just click on it and then click Remove. Once you've added the options click Update the Device and then OK on the next screen.
If there are options on the right side when you open it, please Remove all of the options, click Update the Device, and then go back to the Settings screen, before following the same process described above to add the options to the right side.
Once you've added the options check the front panel of the printer. If they still aren't there, please turn the printer off for 30 seconds before turning it back on (use the power button not the power cord) and try the Scan option again.
Let me know how this goes for you!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Why can I not print to my HP CM1415fnw from my Mac, but I can from my PC?

Why can't I print from my Mac 10.6.8 to my newly purchased HP CM1415fnw (supposedly air print enabled) but I can print to it from my PC? I thought mac's we're supposed to be easier and this printer is not discoverable wirelessly on my mac or iPad/iPhone/Ipod, but it is from my PC? I can only print from the mac/iPad/iPhone/iPod to this printer IF the wired cable is installed. Seems like HP has the problem, but the mac can't even pull up the printer's web page unless there is a wired ethernet connection. Yes, it is working just fine wirelessly with my PC's on the network.

Go to the Apple contact page and the first section should say something like "To purchase by phone, please call..."
Call this number and order a Snow Leopard DVD.
http://www.apple.com/??/contact/
replace the ?? with your country's address code, e.g. http://www.apple.com/uk/contact/
or if you are from America it's simply http://www.apple.com/contact/

How can I hide the main front panel when I run from the executable?

Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?

NIquist wrote:
Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
Try to take over the world!

Why does vi execute in HIGHLIGHT mode only? Does not RUN from front panel

This is extraordinarily puzzling to me...
The attached vi sends a serial command to a motor controller. Command has the form /1V5500P0R, where the /1 means "motor 1", 5500 is the velocity, and the P0 means "rotate positive direction" and R means RUN (do the command).
When I run the VI from the front panel, the motor does not respond. The correct command string appears in the String indicator box, but, the motor does not turn on. HOWEVER, when I use either HIGHLIGHT EXECUTION, or I SINGLE STEP through the block diagram, the vi works perfectly. It issues the correct command the motor runs properly after stepping over VISA WRITE to VISA CLOSE... The VI accepts any velocity command I want to put in the NUMERIC control on the front panel.
I tried putting the code into a WHILE loop to see if that made any difference...and it does not.
What is happening?
Thanks,
Dave
Attachments:
Simple VISA speed controller forum nov 20.vi ‏12 KB

Hello Angelica,
Your suggestion about use of the WAIT VISA function works, however, I am reluctant to use it because I do not want to slow down the application. The application accepts two inputs and creates the one serial output, and the faster it does this, the better for my application.
I had no problem running these VI's on my old PC in Labview 2011. The new PC requires this WAIT function. There is software provided by the hardware manufacturer to manually send the SERIAL commands, and it works fine on both PCs.
New PC is Intel(R) core(TM) i3-2230 CPU @ 2.2GHz, 3G RAM 64 bit processor and Labview 2012
Old PC is Intel (R) Pentium (R) M Processor 1.73GHz, .99G RAM, 32 bit processor and Labview 2011
Understand that in the attached VI, only a single serial command is being sent, so, is it possible that backlogging or overloading of the device can occur from a single serial command? This does not happen with the manufacturer's interface. The attached vi works with the 10ms wait time. This VI is one of a family of VI's that I wrote and operated in Labview 2011 on the old PC, and all of the worked fine without the WAIT function. Now, none of them will run in either Labview 2011 or Labview 2012 without the WAIT in the VISA as shown in the attached VI.
Do you really think that the command is being sent too quickly? The device communicates over the RS485 bus at 9600 baud, 1 Stop bit, No Parity, No flow control. How can a single string be sent too quickly?
Thank you,
David
Attachments:
Simple VISA speed controller WAIT.vi ‏14 KB

Aud2 ZS platnm I get I/O from front panel, but no output from REAR OF CA

Similar Messages

Maybe you are looking for