Audacious, skin problem. Cannot start.
Hello.
I just installed Audacious player, but I cannot start it. When I try to run the player, I get the following error message:
Unable to load skin.
Check that skin at '(null)' is usable and default scin is properly installed at '/usr/share/audacious/Skins/Default'.
I have the default skin in /usr/share/audacious/Skins/Default directory. I do not know what the first part of the message means (Check that skin at '(null)' is usable...). Can someone give me a hand.
I do not know what else information to post. If you need to know anything for my system, I will post the info. I have Arch GNU/Linux Core Dump, kernel: 2.6.24-ARCH. The system is installed as "Basic", I am using fluxbox ... If you need anything else ...
Regards.
OT: I'm sorry. I just couldn't help laughing at the subject, which makes perfect sense within the Linux context but which sounds truly bizarre otherwise.
Similar Messages
-
Repairing disk problems - cannot start up from Install Disk!
Tiger version 10.4.10
I need to repair the startup disk. I have gone through the usual routines (holding down 'c', changing startup disk in system + attempting to change the startup disk using Utilities on the Install disk). On startup the Install Disk is by passed and the disk I want to repair effects the start up instead.
I would appreciate any help!
PS - Would Disk Warrior help with this problem?
Regards - Pete SHi There
To repair the hard drive without the install disk you can do the following. Hold down the command + S keys at startup until you see a black screen with white text. Once the screen has fully loaded type fsck -f. Note the space between the k and -.
Hope this helps -
Sound card problem - This device cannot start. (Code
hi all,
here's my situation...
i had a dell dimension 4400 that came with a sound blaster li've! value(wdm) sound card. i recently got a new motherboard/case etc. i transferred the sound card to my new system and i get a "This device cannot start. (Code 0)" error when i check device manager. for some reason, the game port on the sound card is working fine, but the audio processor part has the error. windows recognizes the card, but it won't use it. the card is a little over 3 years old.
now, i've read the forums, tried a clean install, registry tweaks, changed bios settings, even did a hd format. i also tried different pci slots. i have sp2 and all my other drivers are updated.
the new motherboard i have is a gigabyte 8ipe000g. i already contacted gigabyte, did not get much help. it has onboard ac97 audio. i disabled the onboard audio, but it did not seem to change anything. i have also tried windows drivers, the dell drivers from the cd, and the drivers from the creative website. none of them changed anything. i am now having trouble removing the drivers from add/remove programs. i keep removing them, but they still remain, even after using the wdm driver remover from the cd (a file named ctapxx.exe, or something similar). it's almost like windows is not actually installing the drivers when i install them. i'm wondering if the code 0 error is specifically driver related.
the first time i disabled the onboard audio and updated the drivers a weird thing happened. every time i started the computer up it would crash when it got to the desktop. it no longer does this for some reason, everything now starts up, but i have no audio. the sound card is the only device giving me problems on my system.
is there anything else i need plugged into the sound card? all i have is the sound card plugged into the pci slot, and an audio cord going from the card to my dvd dri've. is there anything that is supposed to go from the card directly to the motherboard? as far as i can tell, i have everything hooked up correctly. i don't understand why the game port works, but not the audio processor.
so, i have basically tried everything. seems like quite a few people get code 0 errors with some sort of hardware they have, but it usually seems like there is no definite solution.
does anyone have a similar problem, or a solution? hopefully i don't have to get a new sound card. i would just stick with my onboard audio, but i hear it can cause problems with games.Since you have a new board it maybe a bios setting.
Is there IRQ conflict from the soundcard.
Maybe remove the card and unistall the software, use a tool "driver cleaner pro" to remove all creative files.
Check your mainboard manual on what pci slot that dont share, i hear slot 3 is the one to use, i use slot 5.
Fit the card and reinstall.
Best of luck. -
Compiling on xp is no problem but I cannot start my appletviewer
I can compile on xp but I cannot start my applets, in DOS
example :
c:\BIN> appletviewer balloon.html
c:\BIN>
After this nothing happens..
I mean it does something but it does not start the applet.
I tried everything looking up in the advanced browser configuration but could not find any problems there.
It does compile and seems to accept the appletviewer command but does not execute it like it is supposed to.
I really hope that u or someone else has a solution to this problem.Hello abbas_bokhary,
Have you tried running some of the standard demo Applets with appletviewer? Or have you run your Applet with Netscape Browser?
-Merwyn,
Developer Technical Support,
http://www.sun.com/developers/support. -
A lot of problem for an error: Cannot start Managed Server through NM
Hi, all. Thank for coming here.
My main problem is cannot start Manager server through Node Manager. I've configured with the same way on my friend's network and It's works but It's wrong with mine.
my weblogic domain:
Machine 1: Administration Server + 1 Managed server
Machine 2: 1 Managed server
all of these servers communicate through SSL protocol. When I try to start Managed Server on remote machine:
output from console which was invoked startWebLogic.sh
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
And this is MS01 log:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Starting WLS with line:
+/opt/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin/java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=MS01 -Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.system.BootIdentityFile=/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Xrs -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3 -Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.35:7001 -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_wlp1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/wlportal_10.3/p13n/lib/system:/opt/Oracle/Middleware/wlportal_10.3/light-portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/Middleware/wlportal_10.3/analytics/lib/system:/opt/Oracle/Middleware/wlportal_10.3/apps/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/Middleware/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/wlportal_10.3/portal/lib/security weblogic.Server+
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Stopping PointBase server...
PointBase server stopped.
And this is output from console which node manager runs on:
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
I tried to start Managed server some times again, but I face up to strange issue, this is output from console which Admin Server runs on (these exception messages throws continuously):
+<Sep 9, 2010 12:42:53 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource-nonXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "p13nDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceAlwaysXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
I can ensure that all of these connection pool has configured to run on 9093 port already. Then I view the DOMAIN_NAME/pointbase.log, it said:
Unable to start the server. start server error: java.net.BindException: Address already in use
I cannot understand what's run on pointbase address ?
All of these error make me angry, because I've configured with the same way on other system and It's work. I've spent all of week to fix these bug, but I'm having nothing :((
Please help me.Thank Jay SenSharma.
I've looked for these JAVA_OPTION values you said, but I cant found them. That value is content of JAVA_DEBUG option, not JAVA_OPTION. In my situation, JAVA_DEBUG=" " (it's not set by default).
Please re-view my error log:
Node Manager output:
+<Sep 9, 2010 11:32:44 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 11:32:44 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Managed server MS01's log:
+<Sep 9, 2010 11:45:05 PM> <INFO> <NodeManager> <Server output log file is '/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.out'>+
+<Sep 9, 2010 11:45:07 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32 from BEA Systems, Inc.>+
+<Sep 9, 2010 11:45:09 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 9216172 Tue Jan 12 02:07:27 PST 2010+
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>+
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - /opt/Oracle/Middleware/user_projects/domains/devdomain/<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>+
+<Sep 9, 2010 11:45:14 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log00002. Log messages will continue to be logged in /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log is opened. All server side log events will be written to this file.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details..+
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ Truncated. see log file for complete stacktrace+
Caused By: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ Truncated. see log file for complete stacktrace+
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ Truncated. see log file for complete stacktrace+
Caused By: java.lang.RuntimeException: There were errors initializing your configuration: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> org.apache.openjpa.util.StoreException: com.pointbase.jdbc.jdbcUniversalDriver
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:123)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.createConnectionFactory(JDBCConfigurationImpl.java:776)+
+ at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:683)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:288)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:597)+
+ at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)+
+ at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+ at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+ at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+ at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+ at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+ at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)+
+ at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
Caused by: java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
+ at java.lang.Class.forName0(Native Method)+
+ at java.lang.Class.forName(Class.java:169)+
+ at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:85)+
+ ... 38 more+
+ at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:302)+
+ at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+ at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+ at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:+
There are 1 nested errors:
+weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+ at weblogic.security.SecurityService.start(SecurityService.java:141)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
+<Sep 9, 2010 11:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 16443>+
+<Sep 9, 2010 11:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>+
+<Sep 9, 2010 11:45:18 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>+
ps:
I've come your weblog and found alot of tips for debugging WebLogic Server exceptions. It's really helpful. Thanks.
Edited by: Doubt_Man on Sep 10, 2010 10:49 AM
Edited by: Doubt_Man on Sep 10, 2010 3:54 PM -
was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?
Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
What version of Indesign?
What OS? "Rights" sounds like Windows
What is happening when starting it?
If Windows, where was it installed?
If Windows, do you have admin permissions? -
just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally. What I'm need to do so? Thank You.
Since you are covered by warranty, I would take it to your nearest Apple store immediately. There might be a problem with the RAM. And, you have 14 days to return the machine, so if it is not an easy fix, you might want to consider returning it for another machine.
-
HT4623 my iPhone cannot start, what problem?
my iphone cannot start, whats problem?
Do a Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
-
Zen 8G This device cannot start code 10 and firmware update problem
I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time. -
ConnectionServer cannot started - NT Service Initialization Problem
When I startup a "Connection Server" for "Business Object Enterprise 12.0" under Windows XP Professional machine, following error raised.
Could you tell me what is the problem. Thanks.
Timestamp ProcessID ThreadID Message
[Wed May 20 09:30:21 2009] 6712 8100 Log: level=3 cat=1 msg=35100 p=ConnectionServer started
[Wed May 20 09:30:21 2009] 6712 8100 trace message: Creating controller thread
[Wed May 20 09:30:21 2009] 6712 8100 trace message: Waiting on monitor to initialize
[Wed May 20 09:30:21 2009] 6712 2412 trace message: In service controller thread's run!
[Wed May 20 09:30:21 2009] 6712 8100 trace message: SIServerController::waitingToInitialize
[Wed May 20 09:30:21 2009] 6712 2412 trace message: SINTService::run enter
[Wed May 20 09:30:36 2009] 6712 2412 trace message: SIServerController::initialize
[Wed May 20 09:30:36 2009] 6712 2412 assert failure: (.\siservice.cpp:839). (false : StartServiceCtrlDispatcher: The operation completed successfully.
[Wed May 20 09:30:36 2009] 6712 2412 Log: level=0 cat=14 msg=35500 p=NT Service Initialization Problem
[Wed May 20 09:30:36 2009] 6712 2412 trace message: SINTService::run: Cannot start service control dispatcherHi Thomas,
I am having the same issue...I couldn't able to start CMS (Content Management services ) .
Reducing the tomcat heap size doesn't help in my case....
Regards, Anil -
When I plug My device To Pc(Windows Xp) It says Problem With Your Apple Mobile Device Drive ,I cheak in Device manger Its shows "This device cannot start. (Code 10)" Help pls..
All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
Firefox had a problem and creashed ... I cannot start firefox
Windows Otlook at same time stopped working with the fpllowing message: cannot start Microsoft Outlook. Cannot initialize shared utilities. ........ help
Hey dapaley,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If you can start it in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox won't start] Knowledge Base article.
Hopefully this helps! -
Hello,
I just installed audacious (simply by pacman -S audacious)
But if i wanne start audacious i get this error-message;
"check that skin at '(null)' is usable and default skin is properly installed at '/usr/share/audacious/Skins/Default'
If I look at the usr/share/adacious/skins/default map, everything looks normal
I also tried to run audacious with root-rights -> same problem.
Does somebody have an idea to solve this small problem ?
Filenox
Last edited by filenox (2008-01-29 18:22:27)you NEED to install the audacious-plugins package (again, pacman -S audacious-plugins). If that doesn't fix your problem, please post again saying so and i'll direct your post to the Audacious developers.
-
"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano
I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine. -
Installation of Oracle 11g on RHEL 5 (Listener cannot start )
Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
ThanksDear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W.
Maybe you are looking for
-
My laptop crashed and I had to get a new hard drive. How do I get the music from my iPod back into iTunes Library?
-
How to position a table to display at the bottom of the page using XSL-FO
hi al, i have a set of codes that creates a table and displays on the first row of the page. i want it to display on the bottom of this page. how do i do that? example code i have is <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0
-
Path direction in Oracle spatial network data model
Hi all, can any one help me how to implement path direction using oracle network data Model? We are using Oracle Spatial database. there is one feature called network constraint in Network data Model. but how to implement path direction of my Network
-
[i3] urxvt has black borders...
Hi there I'm trying out the i3 window manager and it seems to be quite nice except for one little thing that is driving me mad. urxvt always appears with some black borders around it and I don't know how to remove them. I really can't understand if t
-
Customization of one field in User field tab of WBS master
Hi all, There is one requirement given by our Client. In WBS master data , the user need to use the user fields to add one more fields "Division". The Key field of user fields needs to be changed from "text 1" to "Division" and its Japanese descripti