AUDI Car Bluetooth pairing issue after 1.1.1

Hello-
I've got a 2007 Audi with Bluetooth in my radio. The bluetooth was paired ok before the most recent update. Now I cannot get the bluetooth to pair again. I have tried resetting the pin code on the car, reset the car factory settings, restarted the car and iphone a number of times. When I turn BT "On" for the phone, it says searching for devices. It just spins and spins and nothing happens.
This is pretty frustrating since the first version of the iPhone was completely incompatible with Audi's bluetooth. (connection died when the phone locked) The 2nd update they seemed to have fixed the BT issue for Audi. And now with the 3rd update I can't even pair at all. ***?
Anyone else have this same issue and have any suggestions?
Thanks

I have an A6 with the bluetooth feature. It worked pre and post 1.1.1 however you mentioned you turned your bluetooth back ON after the upgrade.? Maybe that created the issues. I have not changed my BT setting from when I first connect to the Audi. Now I may not ever turn off BT.

Similar Messages

Bluetooth connection issues after update

Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H.

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

Audi AMI bluetooth stopped working after 4.2.1 update

Don't think there is a fix for this, but so others don't run into the same issue...
Seems the latest OS update limits the bluetooth connectivity, i can make calls (iPhone 4) but the bluetooth connection drops after about 3secs, and carries over to the phone. I've tried deleting all parings on both sides etc, but haven't found a solution as yet. everything was fine on previous version, and to some extent it does work still just for 3 secs only.
let me know if anyones found a fix to this, and before i get lots of chimes in about getting the car bluetooth upgraded, i understand that approach, however the os change has stopped this not the car, apple created the issue, they should address, or test such that they can pre-warn etc.

Hi there,
I have had exactly the same problem on my 2009 Audi A4 with my iPhone 3G which I have just upgraded to 4.2.1, I have tried re-pairing the phone and also doing a factory refresh on my iPhone. If you find a fix, I would be interested in knowing what it is.
All the best,
Rich

Problems with iPhone 3G software 4.2.1 and car/Bluetooth pairing.

I just upgrated the software on my iPhone 3G to version 4.2.1 and now the phone does not pair with the HandsFreeLink(TM) Bruetooth device in my 2005 Accura TL vehicle. It had worked fine for 3+ years until the software upgrade. Need help on how to fix! Thanks.

One of the issues that we have had since the latest upgrade (4.2.1) is with the radio function in general (both wifi and bluetooth). We have identified that the wifi security protocol stack has serious issues with key length and this can stop connections to the wifi systems such as TC and APE, but it also affects anyone using security string longer than 8 characters.
With bluetooth we noticed that the older pairing sequence was no longer working. The only way that we could clear this down was by deleting all pairing done earlier in both devices, resetting the network settings and then restarting the 'phone. Place the vehicle/headset/device into pairing mode AFTER the iPhone has completely restarted. Go into the GENERAL-BLUETOOTH settings and pair the device again, this should be all you need to do.
One thing to note is that some of the older bluetooth devices only support v1 of the bluetooth protocol stack and this causes trouble with the new update (don't know why yet but it looks like a handshake problem).
Finally - for BMW owners, the bluetooth stack in 4.2.1 can cause intermittent drop-outs if the car software has not been updated recently (prior to Jan 2010). If you need to pair your iPhone 4 or upgraded 3GS, you may need to take your car to a dealer to update the comms package to he latest version. The snap-in for the iPhone 4 is due from Jan 2011.
Hope this helps.

Bluetooth adapter issue after being unplugged then plugged back in

I am running 10.7.4, MacBook Pro 2 GHz Intel Core i7, 16 GB Ram, Thunderbolt Display with Apple wired Keyboard and Apple Magic Mouse.
Initial issue:
After using the Magic Mouse for a few months I noticed a significant performance issue with the mouse when the internal hard drive would spin up for large data transfers, Time Machine backups, etc. I spoke with Apple Care and tried a number of things, tried switching the wireless network, all with no sign of a fix in the future. I paired the mouse with other computers and could never re-create the issue. I also paired other Bluetooth mice with the laptop and could not re-create the issue. After doing further research I found a number of people on-line that started to use an external Bluetooth adapter which would bypass the internal one. After purchasing one from Amazon, the results were immediately superior. I had plugged the adapter into the underside of my Apple wired keyboard and performance was as expected.
However, this has led to issue number 2:
My MacBook Pro will travel with me often therefore requiring me to unplug it from my "desktop" setup which is it plugged into a Thunderbolt Display, and the display has all of the peripheral plugged in including the wired keyboard with the external Bluetooth dongle plugged into it. When I have had my computer away form the set up for a few hours/days and then come back to plug it in, all external devices work immediately with the exception of the magic mouse. It will sometimes work fairly quickly, within a minute of plugging into the Thunderbolt display, and sometimes I am unable to make it work at all unless I restart the machine. This issue has happened with and without the Thuderbolt display. Any assistance is greatly appreciated. Thanks!

Never got a green light.. does that mean no light at all.. or is it flashing amber??
The series 1 particularly but it happens in series 2 and 3 the TC power supply breaks. Then if you power down and turn it on again it is dead. No light at all. The power supply was on the edge and after powering off does not have the ability to supply start current to the TC so shuts down.. If you plug in after a while the light my flash briefly and go out.. it will not happen again until you wait a few hours for the caps to discharge.
If you have Apple Care on a computer and the TC is less than 3years old Apple will replace it.. otherwise you are joining a large and ever growing multitude of dead TC owners.
See repair possibilities or repairer list here.
http://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modems /apple-time-capsule-repair

E7 Bluetooth pairing issue

My E7 connects as authorized automatically to my PC but not the car bluetooth.
Everytime I have to go to paired devices and open the New paired device option, re-enter the pairing password of my car bluetooth and connect.
Next time in the car I have to repeat the same process although the car is set to authorized.
I did not have this problem with my previous phone Nokia E72 with the car.

is the maximum list of connected items used up can you remove them?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Jaguar - Blackberry Bluetooth Pairing Issue

My new 8100 Pearl recognises the hands-free kit in my 2007 Jaguar X-type ("Jaguar" shows on the Bluetooth paired devices screen), but the pairing won't complete through to connection. The dealer confirmed that other phones will pair with the Jaguar touch screens. The Jaguar touch screen reads "No BT Phone" and never connects. I noticed someone else had a similar post back in June 2008 but no one ever replied with an answer. It seems that I have the same issue. Any help would be greatly appreciated.

Hi jeetenderbatra,
Welcome to the support community!
Are you able to sucessfully pair your BlackBerry Curve smartphone with any other Bluetooth enabled devices or other BlackBerry smartphones? If not, do you also see the same issue with the Bluetooth passkey disappearing during pairing?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

BB 9930 Bluetooth Pairing Issues with 2011 Prius

I'm having a bluetooth pairing problem with my Blackberry 9930 staying connected to my 2011 Toyota Prius. It pairs fine and then some time later it will dial randomly or disconnect or freeze up. Toyota says it is a common problem with the new Verizon Blackberry phones. Went to the Blackberry forum and there are plenty of posts where the same problem is occuring on a variety of late model autos with the 9930 and no response from RIM.
Is there a patch out there to address this issue?? Is Verizon addressing this issue with RIM??
Thank you,
Richard

I have the same problem with my 2011 GMC Yukon Denali (great truck BTW). I go to make a call and it dials out and connects with the end user but I can't hear them and they can't hear me. I manually turn off the bluetooth connection on my phone wait for the disconnected from Yukon message and then turn it back on. Once I get the connected to Yukon message, I can place the call and it works fine. Then randomly, it'll stop again and I'll go through the same procedure. It's a pain in the neck (or other body parts)!
When will Verizon (RIM) have a fix out for this? I've seen it in quite a few posts on the Internet so this problem seems pretty widespread.
Thanks

Bluetooth car kit connectivity issue after IOS 8.1.2 update

After the IOS 8.1.2 update I cannot connect my IPhone with the Bluetooth car kit (hands free) system of my car.
Before the update connectivity was perfect, after the IOS 8.1.2 update the car kit does not find the IPhone any longer.
To solve this issue I deleted both the car kit and the IPhone from the paired devices list of both (my car and the Iphone) and tried to pair them again - no success. The car kit just does not finds the Iphone any longer.
Please, help!!!

Just to share the way I finally solved the problem - might be helpful to somebody else.
I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

Car Bluetooth Connectivity Issue with iPhone 6

Just got the iPhone 6 on Friday -- very exciting! But I can't get the phone to connect to my Mini Countryman's bluetooth. The phone will detect the car's bluetooth signal, and says it's connected, but calls aren't audible via the car stereo system, but rather the phone itself. And if I don't turn the bluetooth off, my car thinks I'm on a call and the radio won't work.
It's frustrating because this feature use to work with my 5s. A friend of mine is having the same issue in his car. And I've seen others complain about this -- seems like an Apple issue. Not sure though.

I did what ever everyone suggested, reset all setting, reset network setting, deleting from car memory. It's works fine after you reset it and reconnect to the car with fresh new connection at first, but after I power the phone off and turn it back on, boom the problem comes back. It's got to be a IOS 8 issue. I did this 3 times and I am getting sick and tired of it so I am going to restore and set up as a new iPhone from Itune and wait and see how Apple is going to fix this issue.
I have 3 cars and the Bluetooth is having the same issue on all of them, work first then no more even with the suggest tricks. I hate my iPhone 6 now.
2011 Lexus ES
2011 Subaru STI
2012 Mercedes E350
Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.
Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.

N8 bluetooth pairing issues

I have recently purchase a pair of sennheiser pxc 310 bt headphones. Now whilst i am able to pair them with a nokia C6, I am unable to do so with my Nokia N8. I am running nokia belle refresh on my N8. I get a message telling me that the phone is unable to pair with the headphones. Same story with a galaxy s3. It does not not even give me an option to enter the pairing code on both of them. I've also noticed that the C6 bluetooth menu has way more options and settings than my N8. Pleeeeasssee help me!

It may be a Sennheiser problem....
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Bluetooth connectivity issues after updating to OS X 10.10.3

I have been experiencing issues with bluetooth mouse connectivity (apple magic mouse) after updating OS X to 10.10.3. My Macbook Retina 15" pro (early 2013) keeps losing connection with the mouse. Switching the mouse on/off helps in re- establishing connection between the mouse and the laptop for a few seconds. I was under the impression that this update of Yosemite was intended to rectify bluetooth and wifi connectivity issues. Any suggestions/advice welcome.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Bluetooth Pairing issue

Hi,
I have a Palm Zire72 which is being HotSynced to a Vista laptop with the built-in Bluetooth functionality on the laptop. The Zire and the laptop recognize each other and I can HotSync successfully. The problem is it requires entering a pairing code on both devices everytime I want to HotSync. I can make the code up, and it can be any code, so long as the same code is entered at the laptop and the on the Zire. It works but that is just a pain.
I have searched all the bluetooth security settings I can find on both devices. Two settings appeared to be related to this issue and I set them to what seemed the appropriate setting for lowest security, but it unfortunatley did not solve the problem.
Does anyone know how I can get the Zire to connect without having to enter the pairing code each time?
Thanks for any help,
Bill
Post relates to: Zire 72

After entering the code on the PDA, you should have an option to add the PC to its 'Trusted Device List'. This should be ticked off and you should not be prompted for the code for the subsequent syncs.

Losing connection with in-car bluetooth few seconds after receiving a call

My iphone is only able to hold connection with my Nokia CK-7W bluetooth for a few seconds when i receive a call. i'm wondering why the phone disconnects, as this results to not being able to use the car's audio system.

If you are concerned, change your Apple ID Password:
Apple ID: Changing your password - Apple Support
After you have done that, on your iPhone go to Settings > App Store and iTunes
Tap on your Apple ID
Sign out of your Apple ID
Sign back in with the ID and new password

AUDI Car Bluetooth pairing issue after 1.1.1

Similar Messages

Maybe you are looking for