Audigy 1 Platinum and Prince of Persia:Warrior Wit

Ok, I have an Audigy Platinum. I recently updated to the latest drivers and everything. I usually don't like updating the drivers for this card, but i recently had to due to PowerDVD6 sound not working correctly in 5.. Well I fixed the PowerDVD6 problem, and now have a new problem. I recently installed Prince of Persia :Warrior Within, and once passed the UBI soft logo, the sound shuts off, and I'm left without sound. I also noticed that when I ALT-TAB back to the desktop, I go to my AUDIO HQ, and check the EAX Control panel, and its empty, no presets, or environments.. All I wanna know is, WHAT DO I DO?!!!!
I would hate to have to purchase a new Card, even I understand this is an older card..
Please Help!!:angry:

I have the same problem, is there some way to change the language settings?
Edit:: press the i (info button) then press twice the first button, you can choose languages by clicking the right flag
Message was edited by: Emiel187

Similar Messages

Creative Audigy 1 Platinum and 2.1 Surround So

Ok, i have a Audigy Plat. so have the front dri've etc etc.... i also have the Creative i-trigue 3300 which is a 2. surround sound system....at the moment the way it works is that i connect the 2 speakers into the sub woofer and then the sub woofer into my sound card...thouhg this maybe a 2. system, in real terms the sound card doesnt treat it as a 2. system...
I was just wondering if i can connect like the sub to the digital/analog out of the card and the 2 speakers to the rear and line out of the card?
Reagrds

For 2. and 4., those 2 and 4 speaker settings are what the proper settings are called. Your speaker's sub will control what it sends to the satellites.
Don't worry, they just didn't change the labels. Most cards send the full signal out and most speakers take it from there.
5. is different as the card sends dedicated signals to all 6 speakers.

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Will the Audigy 2 Platinum work on the KT3 Ultra

I recently bought the Sound Blaster Audigy 2 Platinum, and I have been having problems with it. After I installed it, I could never get the sound card to be recognized. I moved the sound card to different PCI slots, and I uninstalled and reinstalled several times, yet still no success. I was wondering if it was because the Motherboard I have doesn't support it or whether I just got a defective product. I have the MSI KT3 Ultra MS-6380E (VIA Apollo KT333 and VT8233A Chipset Based) Motherboard. Could I please get some help?

I have KT3 Ultra, and Audigy 2 (non platnium, but its the same card), and it works fine. Try upgrading your bios maybe?

Audigy 2 Platinum drive on Audigy 2

Hello,
I bought an Audigy 2 Platinum and an Audigy 2 ZS on ebay. Now I want to know if I can use the internal dri've of the A2P on the A2ZS. What are the differences between both cards?
Thanks for your help and greetings from Germany

Yes, the Audigy 2 dri've should be compatible with the Audigy 2 ZS card.
Cat

Audigy 2 platinum drive not work

I have a Audigy 2 platinum and the front dri've is not working. The card itself is working fine. I see the red light coming out of the opitcal out so the power is plugged in. Is the cable the runs from the card to the dri've a regular IDE cable?
My specs:
P4 3.05/533
G ram
Asus P4P800-E motherboard

Hi,
Is the opitcal out light on on the dri've bay? I'm assuming this has never worked and its a new unit. Two things that may help you. In the BIOS check the PnP OS option (usually under PnP/PCI Config) and set this to No.
Also there is a utility called SBDRVDET.EXE...do you have this file on your system? Try manually running this file and see if this hel
ps.
This should be loadingo n startup so it its not it may point to a problem during the installation.
Hope this hel
ps.
John

Audigy Se & Prince of Persia Forgotten Sands!!!!!

Hi AlL....
Somone help me...
Today i installed Prince of persia Forgotten sands in Xp Sp3.... The game sound is muffled[lack of detail & treble bass is good] while playing, but on cutscenes it's good but low audio output through out the game..... Installed drivers" Daniel Support pack 2.7"... But Badcompany 2 , Split a second and Blur has no problems sound was brilliant, had these muffled audio in some games too eg: X-men, Call of Juarez and most wanted.... But Tried these games on windows 7 no problems with sound quality... Direct X updated to latest... any idea is it with direct sound or anything.... Plz hel pme!!!
Any Audigy Users......

Source
Your computer
must meet or exceed these minimum requirements:
Operating System: Windows 98 SE/ 2000/ ME/ XP (ONLY)
Processor: 800 MHz Pentium III or AMD Athlon
Memory: 256 MB of RAM
Video Card: 64 MB GeForce 3 or higher, or ATI Radeon 8500 or higher,
Matrox Parhelia. (GeForce4 MX not supported)
Sound Card: DirectX 9.0 or higher compatible sound card
DirectX: Versions 9.0 or higher (included on game disc)
Hard Drive Space: 1.5 GB minimum hard drive space
CD-ROM: 16X or better (not recommended for use with CD-RWs)
Additional Supported Peripherals: ThrustMaster FIRESTORM Dual Analog
3
Controls: Windows-compatible keyboard and
mouse

Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Audigy 2 ZS Platinum and Stereo PCM

#Audigy 2 ZS Platinum and Stereo PCM? Hi,
Have an Audigy 2 ZS Platinum here and I'm having issues with having no audio when inputting Stereo PCM over Optical Toslink. I tried using both default and internal decoder, but no audio at all. It only works when using passthru/bypass mode. Tried a bunch of stereo inputs and had no audio at all. Is Stereo PCM not supported or what here? The test input streams were PCM two channel 48khz 6bit and 20bit. And Dolby Pro Logic is listed in the decoder tab with Auto, On, or Off. But maybe that isn't the same as Dolby Pro Logic II and that is why there is no audio. Only seems to work with Passthru mode only.
Message Edited by Seraphic on 04-7-2009 03:07 PMMessage Edited by Seraphic on 04-8-2009 0:44 PM

Hi, is anyone able to offe some help? Thanks

Soundblaster Audigy 2 ZS Platinum and Acid Pr

Hello. I am using an Emachines with 3.3GHz Celeron and .5G RAM and Windows XP SP2. I am trying to record with Acid Pro 6 at 24bit and 44.khz (seems to work with the default audio device - Microsoft Sound Mapper or something like that) but I do not get the I/O options that I have with?the Audigy. I went to Options - Preferences then clicked on the Audio device tab and I tried to switch the audio device?to Soundblaster Audigy 2 ZS and I get a message saying that this device does not support that bitrate or sample rate. The only time it will let me switch to Soundblaster Audigy is if I first change to 24bit and 96khz. The problem with this rate is that?it consumes hard dri've space rapidly. Can the Audigy 2 ZS support a 24/44. rate? I am still trying all kinds of troubleshooting. I'm also researching on the Acid Pro forum for info. Any feedback will be appreciated. Thank you. Jeremiah

jmw wrote:
I went to Options - Preferences then clicked on the Audio device tab . . .
Edit:? I went to Options and Preferences in Acid Pro 6 to try changing the audio device type. Could I get a little reassurance that Audigy 2Z Platinum (Not the Movie Editor) supports 24/44. or 24/48?jmw

Audigy 2 zs platinum and cubase sx prob

I bought a creative audigy 2 zs platinum and use cubase vst 2.02.
I chose creative asio in the vst multitrack window (devices menu).
the problem is the wave volume level in the creative mixer is not working when i use cubase. with other applications it works fine.
is "creative asio" the best choice to get low latency?
any suggestion is welcome_________amd duron ,60 GHz GB RAMXP professional splatest creative driversaudigy 2 zs platinum

Hi, is anyone able to offe some help? Thanks

WinDVD 5 Platinum and Audigy 2 ZS

2 days ago I replaced my Li've Value with the Audigy 2 ZS and when I opened my WinDVD 5 Platinum itrecognized the new card right away. I noticed the 24 bit badging on the main window of WinDVD 5 and thought how sweet. However, I uninstalled the Media Center Go and the remote controll and I ended up messing things up so, I uninstalled and performed a clean install.
Now the badging is no longer shown on Windvd 5 Platinum. Why?
How can I tell that this is being utilized properly with Windvd?
Any help would be great. Thanks in advance!

No, I'm afraid not. These two are incompatible.
Cat

Audigy 2 Platinum EX and Windows 7 :'''(

)Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
I've just tried with official driver and update.... last driver are very very bad :'''(
I've partly resolved with unofficial drivers (downloaded on this forum) but external module
still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
unusable.... how can i do? Can you help me, plz?
TXH to all.
P.S.
Excuse me for my english....

)Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
I've just tried with official driver and update.... last driver are very very bad :'''(
I've partly resolved with unofficial drivers (downloaded on this forum) but external module
still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
unusable.... how can i do? Can you help me, plz?
TXH to all.
P.S.
Excuse me for my english....

Audigy 2 Platinum EX and Windows Server 2

Just upgraded from Windows SBS 2003 to Windows Server 2003. My Audigy 2 Platinum EX seems to be working properly, but my microphone now only pops and crackles. I did not have this problem on SBS 2003. I am running Server 2003 SP and have the latest drivers for the sound card. Please assist with this issue.

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

Audigy 2 Platinum, cracks, pops and had enough! Please he

Hi everyone, OK, I know this has been documented before, but I cannot get a resolution. I have an Audigy 2 Platinum. Most importantly, I just built one huge PC out of two perfectly working PC's. The PC the Audigy 2 Platinum was in, was working fine. Now, in my new super duper pc that has everything, it is crackling and popping all over the place, and its really driving me mad. The only time it doesn't crack and pop is when playing a sound file back through Windows Media Player, but i use multi-tracking software, so that doesn't help!
OK, I have two MARC 8 channel soundcards also in my new PC, but they do not conflict. Trust me, they don't. (I removed them and i still had the same fault) I think it is the onboard soundcard on the new Motherboard i have as I checked in MSCONFIG32 and sure enough, it shared the same IRQ. I cannot find how to disable this onboard soundcard in my BIOS which is ASUS Revision 05 (Award Medallion v6.0) Please help as it is driving me into oblivion!
The other difference this PC has over my old one is that it has 4 SCSI divices, two Hard dri'ves (one removable) one 2.2gb ORB dri've, and standard CD dri've.
Please help me!! I am going mad!
Rich

Hi guys
If your computer has any VIA chipset, and if your computer has any of the following problems, then you might need this driver.
The computer stops ("freezes", "hangs", "locks up"), or makes unusual noises when playing sounds.
The computer stops, or files are corrupted, when copying to or from an IDE DVD, CDROM, or CDRW dri've.
Sounds played by the computer are distorted or have a "crackling" noise.
The computer stops when playing 3D graphics or games, especially on an ATI Radeon series video card</LI>
There is a patch for VIA chipset and the patch WORKS for me! Try them at - http://www.georgebreese.com/net/software/ Look under "PCI Latency" patch for VIA chipsets. If you do not have a VIA chipset, you could also try the Turbo patch mention at that website.

Audigy 1 Platinum and Prince of Persia:Warrior Wit

Similar Messages

Maybe you are looking for