Audigy 1 SB0090 and CoolerMaster Centurion 5 Front Panel Au

Hi is it possible to connect the front panel audio headers of the Cooler Master Centurion T05 casing to the Audigy SB0090 AUD_EXT header? I don't have the creative properity connecter(white connecter on top left of card) on the card.
Thanks and hope to hear some replies soon.

jamesroy wrote:
how can I connect my front panel audio out and mic in to my audigy soundcard?model no. SB0090
hope for your replies... thanks...
Audio output:
If you can't find a 0-pin Proprietary connector on Audigy's board then the only solution is split the signal from Front L/R cannel (it can be splitted from Rear L/R too, but you need to be able to output stereo signal to Rear L/R too (speakers set to 4/4., etc.)).
Microphone:
Same base rules as above but no extra settings needed.
jutapaMessage Edited by jutapa on 05-06-2006 :37 AM

Similar Messages

Enabling / Disabling graphs and opening a new Front Panel Window

Hi,
I have a simple application of showing 12 analog signals on 12 different graphs placed vertically in aligned position. I have to develop a user interface so that if user wants to display signal no. 1, 4 and 6 out of total 12 signals, he should make selection using check boxes and click a re-draw button. It should result in opening a separate window with these three signals displayed as separate graphs aligned vertically and adjusted to fit window size. Similarly later user can change his selection of displaying signals (from same acquired data) say 1, 3, 5, 6, 8, 9, 11 & 12 and click Redraw button. It should result in opening a new Window showing all these signals as separate graphs which are aligned vertically and resized to fit the window. Now I have two major issues in this context.
1) I have been searching LabView help to locate a way to open a new window for this purpose but I failed to locate any way for it. As per my limited knowledge, it seems that we cannot have multiple "Front Panel" windows in Labview.
2) For the graph I could not locate a control to enable/disable a graph so that it appears or vanishes. Is there any way to achieve it?
I shall appreciate your valuable advice. I shifted from "Lab View Signal Express" to "Lab View" in order to achieve this user interface design but I am still not successful in finding a good solution for this application.
Regards
Mnuet

Hi Mnuet,
You can do what was said above. Here is a KB on dynamically loading VIs. It looks something like this.
Dynamically loaded VIs are loaded at the point in code while running, as opposed to being loaded when the parent VI is loaded into memory like normal subVIs. You can make a reference to them and then control the front panel appearance, their run status, etc with property nodes and invoke nodes.
Jeff | LabVIEW Software Engineer

How to change the font and type in the front panel

Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040

Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

Is it possible to change the font style and size of the front panel title?

Can you change the style and size of the Front Panel Window title? I seem to have no luck. I seem to be stuck with only 1 font/style. I would like to use a superscript for 1 of the letters in the title. Is this possible? If it isn't this would be a nice feature to have in the future. I am using LabVIEW 8.5.1.

Things like the window title font is a function of Windows - not LV. You can change it globally, but not on a window by window basis.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Open and close a vi front panel dynamically

I created a main vi panel that display all the signal names. I like the main vi to open a new plot screen when I double click on the signal name. I was able to do that using invoke node. But I when I close the plot screen by clicking on the Window "Close" button, the main vi was not able to open a new one again. So I disabled the Window "Close" button and only use the "Stop" button coded in while loop in the blockdigram of the plot screen. It worked, but the plot screen is still open and changed to editing mode. Is there an easy way to close the plot screen by only one click. Another question is that how does the main vi can open multiple plot screens. Thanks for your advice.

I think I know what happens:
If you close the front panel of a sub-vi, the code is still running, so the VI doesn't terminate and somehow you can't address it (it don't know how you communicate with your sub-vi).
So in your sub-vi you should monitor the panel-close event, and finish the code of the VI and finish the VI
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

Is there a way to use the built-in Datalogging and programmatically log the front panel while the vi is running?

I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that. Currently, I am grabbing all of the front panel control references using VI Server and if there are any changes, the changed values are written to a log file along with a date/time stamp. I'm mostly dealing with buttons, which simply change from 0 to 1 or 1 to 0, so it's not too hard to visualize what was pressed. It works okay for reconstructing what happened, but it would be much nicer to use the built-in fe
ature because you can "replay" directly onto the front panel and actually see what the changes were. However, without being able to programmatically make a new log, it won't work for me.

Jake,
There are several options here.
I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
Good luck

How to store character in file and display result on front panel

hi
currently i m working on FPGA project.i want to aquired data from FPGA board.i want to know about how to store character to file and contineous display each character on front panel in string format.
i have complete up to character display on front panel but only single character display when i want all character in string format.
Solved!
Go to Solution.

I don't see how this question is at all related to Digital I/O but it sounds like you just need a shift register with the concantanate string function.

Automatic Pause (through program) and Manual Resume through front panel Button

Hi, I am trying to implement a system which measures voltage and current for a varying source voltage at varying temperature. The program acquires 5 pairs of voltage and current data. The issue here is that the source voltage is varied by manually changing the value of the variable resistor. What I would like to do is somehow pause the program automatically once the loop (for acquiring 5 V and I data pairs) has completed. Then, after the user manually changes the value of the variable resistor (and enters the new value through a front panel indicator), the user should be able to resume the program through a front panel button like in this example: https://decibel.ni.com/content/docs/DOC-10792
Is it possible to implement this in LabView?
In summary: I would like to implement a system in which the program would pause automatically after a condition has been fulfilled, and can be resumed through a front panel button.
Thank you in advance for any help and suggestions. I hope I made my query clear. I'm not sure whether attaching the program would help but I included it just in case
Solved!
Go to Solution.
Attachments:
Resistivity Measurement.vi ‏132 KB

Hi all! I've overhauled my program after learning how to create state machines in LabVIEW. I think I've managed to make it able to pause program execution by staying in the Initialize state if Pause After Measurement is set to True, only resuming measurement once the user has pressed the front panel button to Acquire Data. Attached is the code for the program.
Thanks to you all for leading me to the right direction (I hope)
I have other questions though for some other functions I want to implement in the program (which are not very relevant to the original topic title). Would it be better to start a new topic or continue the discussion here?
Attachments:
Resistivity Measurement v2.vi ‏159 KB

Create Run And Stop Buttons on Front Panel, rather than using the toolbar run/stop

I would like to make my vi more user friendly by creating start and stop buttons on the front panel. I havent found much info on how to create them. I have created a boolean stop button to stop my FOR LOOP.
-Chris

Creating the buttons is easy - just select the style you want from the Boolean palette. What you need to do is change your diagram and the VI properties. To have a VI automatically start running when opened, open VI Properties by selecting that under the File menu or right clicking the VI's icon. Select Execution and check the Run when opened box. If you need the user to enter some data or change parameters before running the program, there's a couple of ways to go about it with a front panel Start button. You could have a separate while loop with just the start button in it and connect an output of that to a main while loop. This creates data flow and ensures that the start while loop executes before the main. You could create a simple state machine. T
here's a couple of shipping examples. Just open the Example Finder and enter state for the keyword. You could also use the Event structure. Again, there are several shipping examples. Instead of doing a search, you could also browse the Example Finder and look at what's underneath the Building User Interfaces topic.
p.s. I don't think you created a stop button for a for loop as there is no way to stop a for loop. What you can stop is a while loop.

Auto save and auto recover of front panel controls/indicators values

i just want that when i exit from the VI's front panel all controls and indicators current values get saved automatically and when i get back into this vi,those values get recovered automatically.
Like if i incremented numeric control value from 1 to 5 , when i exit from the vi the value 5 get saved automatically and when i get back into the vi ,it shows the recovered value 5 to me automatically.
best regards

I'm Back
I was mistaken when I said the you could select to save either the controls or indicators or both in the Open G Vi's, They are hard wired for both. I made minor changes to these VI's for my app., because I only needed the controls to be saved. The example I am providing uses the Modified VI's, but I've also included the originals.
Modified
Read Panel from INI.vi
Write Panel to INI.vi
Originals
Read Panel from INI.vi
Read Panel from INI__ogtk.vi
The ability to select either or both could easily be implimented into these Vi's using a case selector and an enum wired as an input
Controls only
Indicators Only
Both
Incase you don't have the OpenG toolkit I've provided the necessary files for this example to function
Extract the zip file to your User.lib directory then open Usage.vi
Hope this helps you
Georges Janveau
Attachments:
Config File Usage.zip ‏861 KB

How do I center and/or maximize the front panel on every event?

Hi,
So basically I have a little issue with trying to maximize and then scale back a VI's front panel every time a user selects a different option from a ring control.
So far i've been using the LVWINUTIL.LLB and the provided window size vi to set the size I want on ring selection change which works fine, but as far as centering the VI goes, the method I'm calling only works the first time. After it maximizes and I select a different option on my ring control which is linked to a case within a while loop it simply resizes to the size i set which is correct but when I got back to the ring case which is supposed to maximize the front panel again, it doesn't do it. Centralizing the FP also only works once.
I'm using FP.Run-Time Position.Centered to try and center the VI....only works once. I do understand that this might be the desired behavior since the name is run-time position meaning it'll only do this when the VI is first run, however I need this to happen more then once, how can i do this? Thanks...

How did you center the FP?
Their a method that should work time after time.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Is it possible to sort the controls and indicators on the front panel?

Programming events would be much easier in an application with lots of
controls and indicators, if there where a means to sort and group them.
Is there any means to do so such that you see a sorted list when choosing the control that triggers an event etc..?

I am not aware of a way to sort the list of controls (that are listed in the edit events dialog) by name. They seem to be sorted in the order they were created.
I agree, sorting could be useful for large VIs.
LabVIEW Champion . Do more with less code and in less time .

Matlab plot integration and interaction on a front panel

Hello all,
I am making slow progress in the direction I have taken and was wondering if anyone had some experience/ideas with this. In my application I have the need to mesh a grid optimized to the geometry defined by several boundary points. For this purpose I found a MATLAB code developed by MIT which I would like to use. Right now I can define these boundary points in Labview, then call the matlab exe with this information and have the meshing code come up with a grid. I can get the grid point coordinates back to labview, but here is where the problems start. I am looking for a way to plot these discrete points, not as a curve but as separate dots or 'x'. Also, I would like to be able to click on a point and have Lab View read that points coordinates and store it in a variable.
I assume there would be event structures involved, mouse click event, something like that, so I will be experimenting with that in the meantime, but right now I do not know how to even plot my points.
Thank you advance.
Alek

There are a number of examples that ship with LabVIEW to show you how to do plotting. Open the Example Finder (Help -> Find Examples) and in the tree select Fundamentals -> Graphs and Charts. Also take a look at using cursors for graphs, which will give you coordinate values.
Stop back when you've had a look at those and have a better idea of what you need to do.

How much it cost to update bb9810 and to change the front panel

i went to various service centres for updation of my phone's software but everywhere they are charging more than 500 and i have my phone in warranty period when i informed it to them , they said i have to leave the phone for 1 week , i dint get that how can it takes 1 week for software updation .. please help

Hello,
Every shop controls their prices...no one here can tell you if those prices are good, bad, or otherwise. But, you can conduct the process yourself. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Audigy 1 SB0090 and CoolerMaster Centurion 5 Front Panel Au

Similar Messages

Maybe you are looking for