Audigy 2 & 4 Driver Update Faulty

I had a Creative Audigy 2 ZS Plat. Soundcard.
I recently re-formatted my PC, Installed the drivers from the CD, everything was absolutly fine, then I went onto the Creative Website and used the Auto-Update to update the drivers and software.
When installing the Driver update, it came up with a message saying that the driver could not be stopped, then it asked to restart, which it did, it then proceeded to install the driver, it then asked to restart windows again.
When windows reloaded, there was no sound,?on investigating why, the Sound Blaster was not listed as a soundcard under Sound and Audio Devices.
I looked in device manager and the soundcard was listed as a Multimedia Audio Controller with a yellow exclaimation mark next to it.
I've been able to get the sound card to work again by going onto the Windows Update website, it appeared as an update under hardware.
However when I play a DVD now, my DVD software allows SPDIF playback, it doesn't appear to send anything to my Creative Inspire Digital 5500 speakers, prior to my reformat, they switched to Dolby Digital mode, but now they don't and I get no sound at all.
So I tried downloading the Driver again and installing it, the same thing happened when it installed on my PC, in that it had to restart as it couldn't stop the device.
This time, when it did so, an add new hardware search for drivers window came up, looking for a "PCI Input device" I opted to search for drivers automatically, and it claimed it could not find any drivers, and now I get no sound again.
Luckily the Driver has appeared again in Windows Update, so I will be able to get sound again.
Does anyone know how to get the Driver update to install properly, is anyone else experienceing the same problems as me?

With XP I'm still using 2.8.000, they seem to work fine

Similar Messages

Audigy 2 ZS, Driver update results in broken driver, no sound.

> I recently bought a used Audigy 2 ZS which works fine with the drivers from the CD. I don't know how old they are, Creative System Informations says driver version .82.0. That's why i wanted to update them. I had a Li've! before, so i knew how to update the drivers with the auto updater on the creative site. By the way, i did a clean up of the old drivers with Driver Sweeper before installing the new sound card.
When i do a driver update with the auto updater on the Creative website it downloads and install the newer drivers, but after the mandatory reboot i have no sound, and every Tool crashes, throws an error message or just doesn't work. I lose all my EAX effects and can't select any speakers. The only way to solve that is to uninstall everything and do a clean start with the CD.
I can update everything via the auto updater, except the drivers.
Using Audigy 2 ZS and Windows XP SP3
AMD Athlon XP 3200+
2 GB DDR-400 RAM
Geforce 6800GT 256MB

With XP I'm still using 2.8.000, they seem to work fine

Audigy 2 ZS driver update error mess

While trying to update the driver for the Audigy 2 ZS card I get the following error message:
"Setup did not detect a driver version that is supported by this Web update"
Can anyone please help?
Thanks
Cachibache

With XP I'm still using 2.8.000, they seem to work fine

Audigy 2 driver update fresh inst

Just did a fresh install of Win XP. Now I have two questions:
() Can I install the drivers and firmware directly from Creative, without using the original installation CD, and, if so, which of the many downloads do I choose? (Audigy2CMS PCAPP LB 3 0. . . .)??
(2) If it is advisable to use the original CD first, which of the update downloads do I use (if any) for the Audigy 2?
I find the download update lists leaves me with questions Having had issues slowly develop with the previous install of XP and Audigy, I wish to take advantage of this fresh XP install to install Audigy correctly.
Thanks, guys.
Joseph, in Oregon

Quinnjm,
It really depends on what you use. If you have a platinum dri've and use the remote then you will want to at least install MediaSource from the CD. Then you will only need to update file to MediaSource.
The only driver file you will need to install will be the second driver listed:
Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update[/url]
This file will install with or without drivers and includes a file called CTPanel.exe that will allow you to configure your card. The file is located in c:\program files\Creative\SB Audigy 2\Program\Common\WDM
Jeremy

10/09/06 driver update for Audigy 2

Has anyone installed the driver update put out today for Audigy 2 ZS? Any feedback on whether they are worth downloading would be appreciated.

You can install the file EAX4DRV_AUDIGY2__84_50.exe . Check under Support> Downloads, and fill that in the Search By Filename option. That file can be installed standalone (no previous drivers required).
Cat

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problems with Driver update =( Any advi

I recently was advised that I had to update my soundcard drivers in order for an application to run correctly. I was directed to www.creativelabs.com to download the proper drivers. after I downloaded the drivers and launched the update I promptly received a message that says the setup has failed to detect a supported product on my system. I then did a repair install to add any potentially missing information, but when I launched the setup again I received the same message. I have a regular old Audigy Soundblaster that I purchased from Wal-Mart, can anyone offer any advice or assistance?Here's my dxdiag:?------------------
System Information
Time of this report: 8/24/2007, 8:56:55
?Machine name:
?Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.070227-2300)
??Language: English (Regional Setting: English)
System Manufacturer: Dell Inc
?System Model: Dimension E52
???BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
??Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+,? MMX,? 3DNow (2 CPUs), ~2.3GHz
??Memory: 2046MB RAM
??Page File: 524MB used, 345MB available
??Windows Dir: C:\WINDOWS
?DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
?DxDiag Version: 5.03.2600.280 32bit Unicode------------
DxDiag Notes
?DirectX Files Tab: No problems found.
??Display Tab : No problems found.
??Sound Tab : No problems found.
??Sound Tab 2: No problems found.
??Sound Tab 3: No problems found.
??Music Tab: No problems found.
??Input Tab: No problems found.
??Network Tab: No problems found.--------------------
DirectX Debug Levels
Direct3D:? 0/4 (n/a)
DirectDraw:? 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:? 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:? 0/6 (retail)---------------
Display Devices
??Card name: Radeon X300/X550 Series?
?Manufacturer: ATI Technologies Inc.
??Chip type: ATI Radeon Graphics Processor (0x783)
??DAC type: Internal DAC(400MHz)
?Device Key: Enum\PCI\VEN_002&DEV_783&SUBSYS_0302028&REV_00
?Display Memory: 256.0 MB
?Current Mode: 280 x 024 (32 bit) (60Hz)
??Monitor: Plug and Play Monitor
?Monitor Max Res: 600,200
??Driver Name: ati2dvag.dll
?Driver Version: 6.4.000.675 (English)
??DDI Version: 9 (or higher)
Driver Attributes: Final Retail
?Driver Date/Size: 7/27/2007 23:30:45, 26932 bytes
??WHQL Logo'd: Yes
?WHQL Date Stamp: n/a
???VDD: n/a
??Mini VDD: ati2mtag.sys
?Mini VDD Date: 7/27/2007 23:30:27, 237584 bytes
Device Identifier: {D7B7EE2-32C3-CF-A369-0823AC2CB35}
??Vendor ID: 0x002
??Device ID: 0x783
??SubSys ID: 0x0302028
??Revision ID: 0x0000
??Revision ID: 0x0000
??Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
?Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
???{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
??Registry: OK
?DDraw Status: Enabled
?D3D Status: Enabled
?AGP Status: Enabled
DDraw Test Result: Not run
?D3D7 Test Result: Not run
?D3D8 Test Result: Not run
?D3D9 Test Result: Not run-------------
Sound Devices
???Description: Sound Blaster Audigy
?Default Sound Playback: Yes
?Default Voice Playback: Yes
???Hardware ID: PCI\VEN_02&DEV_0007&SUBSYS_00A02&REV_00
??Manufacturer ID:
??Product ID: 00
???Type: WDM
???Driver Name: P7.sys
??Driver Version: 5.2.000.052 (English)
??Driver Attributes: Final Retail
???WHQL Logo'd: Yes
??Date and Size: 7/6/2005 20:4:30, 389056 bytes
???Other Files:
??Driver Provider: CREATIVE
??HW Accel Level: Full
???Cap Flags: 0xF5F
?Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
?Static/Strm HW 3D Bufs: 64, 63
???HW Memory: 0
?Voice Management: Yes
?EAX(tm) 2.0 Listen/Src: Yes, Yes
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run???Description: Modem #0 Line Playback (emulated)
?Default Sound Playback: No
?Default Voice Playback: No
???Hardware ID:
??Manufacturer ID:
??Product ID: 8
???Type: Emulated
???Driver Name:
??Driver Version:
??Driver Attributes:
???WHQL Logo'd:
??Date and Size:
???Other Files:
??Driver Provider:
??HW Accel Level: Full
???Cap Flags: 0x0
?Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
?Static/Strm HW 3D Bufs: 0, 0
???HW Memory: 0
?Voice Management: No
?EAX(tm) 2.0 Listen/Src: No, No
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run???Description: SigmaTel Audio
?Default Sound Playback: No
?Default Voice Playback: No
???Hardware ID: HDAUDIO\FUNC_0&VEN_8384&DEV_768&SUBSYS_0280ED&REV_ 002
??Manufacturer ID:
??Product ID: 00
???Type: WDM
???Driver Name: sthda.sys
??Driver Version: 5.0.543.0000 (English)
??Driver Attributes: Final Retail
???WHQL Logo'd: Yes
??Date and Size: 8/5/2006 04:00:8, 7464 bytes
???Other Files:
??Driver Provider: SigmaTel
??HW Accel Level: Full
???Cap Flags: 0xB5B
?Min/Max Sample Rate: 4400, 92000
Static/Strm HW Mix Bufs: , 0
?Static/Strm HW 3D Bufs: 0, 0
???HW Memory: 0
?Voice Management: No
?EAX(tm) 2.0 Listen/Src: No, No
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run---------------------
Sound Capture Devices
???Description: SigmaTel Audio
?Default Sound Capture: Yes
?Default Voice Capture: Yes
???Driver Name: sthda.sys
??Driver Version: 5.0.543.0000 (English)
??Driver Attributes: Final Retail
??Date and Size: 8/5/2006 04:00:8, 7464 bytes
???Cap Flags: 0x4
??Format Flags: 0xCC0???Description: Modem #0 Line Record (emulated)
?Default Sound Capture: No
?Default Voice Capture: No
???Driver Name:
??Driver Version:
??Driver Attributes:
??Date and Size:
???Cap Flags: 0x20
??Format Flags: 0x0???Description: Sound Blaster Audigy
?Default Sound Capture: No
?Default Voice Capture: No
???Driver Name: P7.sys
??Driver Version: 5.2.000.052 (English)
??Driver Attributes: Final Retail
??Date and Size: 7/6/2005 20:4:30, 389056 bytes
???Cap Flags: 0x4
??Format Flags: 0xFFF-----------
DirectMusic
??DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
?DLS Version: .00.006.0002
?Acceleration: n/a
??Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
????SigmaTel Audio, Software (Kernel Mode), Output, DLS, Internal
????Sound Blaster Audigy, Software (Kernel Mode), Output, DLS, Internal
????Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
????Creative SoundFont Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
????Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
??Registry: OK
?Test Result: Not run-------------------
DirectInput Devices
??Device Name: Mouse
??Attached:
?Controller ID: n/a
Vendor/Product ID: n/a
??FF Driver: n/a??Device Name: Keyboard
??Attached:
?Controller ID: n/a
Vendor/Product ID: n/a
??FF Driver: n/a??Device Name:? 2400 Series
??Attached:
?Controller ID: 0x0
Vendor/Product ID: 0x043D, 0x00E9
??FF Driver: n/a??Device Name: Controller (XBOX 360 For Windows)
??Attached:
?Controller ID: 0x0
Vendor/Product ID: 0x045E, 0x028E
??FF Driver: n/aPoll w/ Interrupt: No
??Registry: OK-----------
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x0DE, 0x026D
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/4/2004 06:00:00, 57600 bytes
| Driver: usbd.sys, 8/4/2004 06:00:00, 4736 bytes
|
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x046D, 0xC06
| | Location: Optical USB Mouse
| | Matching Device ID: usb\class_03&subclass_0
| | Service: HidUsb
| | Driver: hidclass.sys, 8/4/2004 06:00:00, 36224 bytes
| | Driver: hidparse.sys, 8/4/2004 06:00:00, 24960 bytes
| | Driver: hid.dll, 8/4/2004 06:00:00, 20992 bytes
| | Driver: hidusb.sys, 8/7/200 5:02:20, 9600 bytes
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x046D, 0xC06
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
| | | Driver: mouclass.sys, 8/3/2004 23:58:34, 23040 bytes
| | | Driver: mouhid.sys, 8/7/200 4:48:00, 260 bytes
| |
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x43C, 0x2005
| | Location: DELL USB Keyboard
| | Matching Device ID: usb\class_03&subclass_0
| | Service: HidUsb
| | Driver: hidclass.sys, 8/4/2004 06:00:00, 36224 bytes
| | Driver: hidparse.sys, 8/4/2004 06:00:00, 24960 bytes
| | Driver: hid.dll, 8/4/2004 06:00:00, 20992 bytes
| | Driver: hidusb.sys, 8/7/200 5:02:20, 9600 bytes
| |
| +-+ HID Keyboard Device
| | | Vendor/Product ID: 0x43C, 0x2005
| | | Matching Device ID: hid_device_system_keyboard
| | | Service: kbdhid
| | | Driver: kbdhid.sys, 8/3/2004 23:58:36, 4848 bytes
| | | Driver: kbdclass.sys, 8/3/2004 23:58:34, 24576 bytes----------------
Gameport Devices
PS/2 Devices
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 02:0:08, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 23:58:34, 24576 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 02:0:08, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 23:58:34, 23040 bytes----------------------------
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK-------------------
DirectPlay Adapters
DirectPlay8 Modem Service Provider: Conexant D850 56K V.9x DFVc Modem
DirectPlay8 Serial Service Provider: COM3
DirectPlay8 TCP/IP Service Provider: Local Area Connection - IPv4 ------------------------
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s-------------------------
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Dri'ves
??Dri've: C:
?Free Space: 45.0 GB
Total Space: 235.2 GB
File System: NTFS
??Model: ST3250820AS??Dri've: D:
??Model: TSSTcorp DVD+-RW TS-H653A
?Driver: c:\windows\system32\drivers\cdrom.sys, 5.0.2600.280 (English), 8/4/2004 06:00:00, 49536 bytes

fro_fromthe80s wrote:
It's just a regular ol' Audigy
Actually your "regular old Audigy" is an Audigy SE,?Driver Name: P7.sys
is the Audigy SE driver, not the regular Audigy driver. The driver you want is this one,?http://us.creative.com/support/downl...ype=0&x=27&y=6?

Cant Install the latest 2 Driver Updates for Audig

Hello,
I cant install the latest drivers:
.Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002
2.Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55
Setup is giving me error: "Setup Couldn't detect any Sound Blaster Audigy 2 on your system"
all other drivers previously to that are installed. (also installed EAX4 web update).
specs:
Audigy 2
Windows XP
024Ram
AMD 64bit
please advice what to do. thank you

alright, it seems to have worked.
thanx a bunch

Sound Blaster Audigy 2 ZS - Driver is

Hello,
Recently my creative speaker settings and all my THX controls stopped working. I removed all my drivers, then reinstalled the following from the creative website.
. Creative Sound Blaster Audigy, Audigy 2 series and Audigy 4 series Driver 02.08.0004
This reinstalled the creative media center as well as the creative audio console, but it did not install the Sound Blaster Audigy 2 ZS folder or application etc, which is what has all the Creative Speaker Settings and THX control and all the other creative options. I tried using the driver installation disc which came with the soundcard, but although it shows the creative settings/ THX control installed, whenever i try to open those applications, I get an error message saying that it cannot open that audio device, install audio drivers. I searched for the right drivers and even did the automatic updater, yet it did not work.
So basically could anyone help me find the right driver to download so my creative speaker settings, THX console and all those other apllications will work?
Thanks for your time.

Even using just the CD drivers, shouldn't the applications still work?
right now when I try to open creative speaker settings I get the error:
The Audio device selected by this application is not detected. The application will exit.
Does that mean anything?

PAX PCI Audigy All-OS-Driver V2.60 EAX Fully works now Please redownload.

PAX PCI Audigy All-OS-Driver V2.60
? Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX ?
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
6 years of PAX drivers.
XP Vista Win7 ? 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
?Tweaked Edition?
Supported cards:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA
Supported OS:
XP, Vista, Win7
32 and 64Bit
Based on:
2.8.007.7
PAX Changes:
+ Updated tweak settings. Update setting of 7/22/
Added 64bit improving installing.
?ct_oal.dll=55,Common\amd64
Took out ct_oal.dll=55,Common\amd64 EAX fully works now.
You can find in main folder just click on it and installed. I highly recommend used Iolo System Mechanic fix reg and defrag there free trial.
Important :
Before installing, remove all traces of any previous ?drivers and all driver by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from Guru3D"]http://www.guru3d.com/category/driversweeper/]Guru3D - Driver Sweeper[/url] or paid version at hardwareheaven.com driver cleaner.net
To install the software driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
What is Pax?
Formally known as Youpax, Pax was founded by Robert McClelland 6 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
For support, feedback and latest driver updates, please visit : http://<a href="http://www.hardwareh...x-drivers/</a>
Technewshw.com"]http://www.technewshw.com/forum/index.php]Technewshw.com - Powered by vBulletin[/url]
Guru3D.com"]http://forums.guru3d.com/]Guru3D.com Forums - Powered by vBulletin[/url]
TWeaKFoRCe.CoM"]http://tweakforce.com/]TWeaKFoRCe.CoM your source for the latest Video Drivers[/url]
http://dl.technewshw.com/drivers/PAX...ver%20V2.60.7z

Your welcome try the driver out I do have audigy 2 card but it's on older hp computer haven't been used in months lol. But could used some feed back .

PAX PCI Audigy All-OS-Driver V2.00

PAX PCI Audigy All-OS-Driver V2.00
Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX ?
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
5 years of PAX drivers.
?XP Vista Win7 ? 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
Tweaked Edition
Supported cards:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA
Supported OS:
XP, Vista, Win7
32 and 64Bit
Based on:
2.8.007.7
PAX Changes:
+ Updated tweak settings.
+ EAXConsole Fully fix with tweaks
+ EAXConsole CMSS and CMSS2 and Stereo works!
Issue EQ Graphics setting doesn't work muss be creative issue.
Important :
Before installing, remove all traces of any previous drivers and all driver by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from <a rel="nofollow" href="http://www.guru3d.com/category/driversweeper/"]http://www.guru3d.com/category/driversweeper/[/url] or paid version at hardwareheaven.com driver cleaner.net
To install the software driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
What is Pax?
Formally known as Youpax, Pax was founded by Robert McClelland 5 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
PAX? 2005-200
http://dl.technewshw.com/drivers/PAX/PAX%20PCI%20Audigy%20All-OS-Driver%20V2.00.7z

Will this driver fix the pro 4 breakout box prblems ?

PAX PCI Audigy All-OS-Driver V1.35

"PAX PCI Audigy All-OS-Driver V.35. 'PAX PCI Audigy All-OS-Driver V.35. - XP/Vista/Win7 ? 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
PAX PCI Audigy All-OS-Driver V.35
Code name ?Wing Lock?
?Tweaked Edition?
Supported cards:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA
Supported OS:
XP, Vista, Win7
32 and 64Bit
Based on:
SBAX_PCDRVBETA_US_2_8_00
PAX Changes:
+ Updated tweak settings.
+ 3dcmss fix
http://dl.technewshw.com/drivers/PAX...iver%20V.35.7z
And I can confirm that 3dCMSS fully works now . Enjoy.

.Re: great!!! thank you robert!!?4 ?
iuzi wrote:
great!!!
thank you robert!!?
Your welcome. I tested this on my 3rd bro computer using my old audigy 2 card. Both CMSS and 2 does work. Over weekend at least I got see my nephew .

PAX PCI Audigy All-OS-Driver V1.50

"PAX PCI Audigy All-OS-Driver V.50b Celebrated 5 years of PAX drivers.
PAX PCI Audigy All-OS-Driver V.50
- XP/Vista/Win7 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
PAX PCI Audigy All-OS-Driver V.50
Code name Wing Lock
Tweaked Edition
Supported cards:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA
Supported OS:
XP, Vista, Win7
32 and 64Bit
Based on:
2.8.007.7
PAX Changes:
+ Updated tweak settings.
http://dl.technewshw.com/drivers/PAX/PAX%20PCI%20Audigy%20All-OS-Driver%20V.50.7z

& What did you especially fix or add? I have surfed all around in gameheaven forums and other places but the only thing you wrote is" better performance, better exelaration etc" . I dont think it is enough , you HAVE TO tell which software modules you added or what you have tweaked.
If I were you I would take a look at Daniel_k's threads and take them as reference before posting..................

Audigy 2 NX Driver Li

System?I am using a Shuttle Core 2 Duo system with 4 GB of memory (of which 3.25 GB is recognised) running Windows XP Professional. Soundcard?I use an external Audigy 2 NX. Initial Problem?My PC crashed as a result of a driver problem. On reboot the soundcard did not function. All of the lights on blinked together every two or three seconds. When I went to COntrol Panel and looked at the Sound Devices it did not appear in the drop down list. Steps taken?I tried to run a repair installation of the drivers from the original driver CD. The install aborted giving me the following message:
0x800402?"An event was unable to invoke any of the subscribers" I next tried to uninstall the drivers by selecting them via Control Panel/Add Remove Programs. The removal process began and then stalled at 60% giving the same 0x800402 error. In consequence I cannot uninstall or reinstall the drivers. The card now produces no light when plugged into the mains and a USB port. The on/off button does not appear to be functioning. However, the optical port has its red light,?Help needed?If the soundcard has died I would like to be told and I will replace it. Otherwise (in fact in any event) I would appreciate some help in performing a manual removal of the drivers. Many thanks?Sean

in 0 times installing sp2 9 times the whole system crash
i have no time to make experiments because there is no good sp driver for my audigy 2
the problem is with the original driver the AC3 digital output is not working correctly
what do you do in the test phase? looking the card:
"oh how nice card!"
the driver update is 2MB ?!
it is an global trend, that the HW producing companies doesnt care about the good drivers, and doesnt care the problems

HP Laserjet 1200 and Driver Updates

On the "Download Drivers and Software" support page for the HP Laserjet 1200 printer, there is an option, "Automatically check to see if your driver needs updating".
A machine that I am supporting is having a MS Word collating issue (sometimes works, sometimes doesn't) and I don't know if its a driver issue or not. The machine is XP SP3.
If I click on this link, obviously it will check the drivers, but:
1) Will it give me the option to automatically update the drivers if it finds they are outdated, and
2) How do I roll back to the old driver if the update introduces problems?
Since this potential driver update isn't going through the normal MS XP driver update routine in Device Manager, I'm leery that I won't be able to recover if something goes wrong.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Audigy 2 & 4 Driver Update Faulty

Similar Messages

Maybe you are looking for