Audigy 2 5.1 with head

I currently have an audigy 2 configured for 5. surround. But i now want to use a headset (headphones and mic) for skype. I have a logitec headset which has 2 audio jacks - one for the mic and the other for the headphones. How can i get this working with the audigy?
Thanks.Message Edited by simonb7 on 08-7-2005 07:39 PM

Mic plugged into mic socket on card, headphone(black)into spkr(green).
In volume control(or surround mixer)make sure mic is selected for record source and that the slider is up).
Easy as that.

Similar Messages

Internal table in Excel output with Header and Total

Hi All,
I have a selection-screen of a report where there is option to specify the path of a file to be stored in local PC. This Report gives output in ALV format which displays header and total of columns.
Now, the requirement is, when the user specifies a path for the file in selection screen it should download in the specified location with header and total row into an excel format.
The issue is, I have the internal table with data without total and header row and the total is getting displayed in the screen through ALV feature. I am not sure, how to give the same output in downloaded excel with header row and total as it is displayed on screen.
Please let me know, if you have any suggestions.
Thanks & Regards,
Anshumita.

try using TOP OF PAGE event and write the number of records in the header part.
hope this will help.

ALV Display with header on each page.

Hi experts,
I had develop the report which output comes in ALV with heading. While printing the output, suppose there are 60 lines in output and 15 lines on each page so 4 page will print. Now i want the same heading will come on each page.
Is it possible? if Yes how?
Pls reply.
Thanks,
Abhishek.

Hi,
Write the heading in the top-of-page.
You will have to register the event TOP-OF-PAGE and in the corresponding form write the header.
Regards,
Ankur Parab

Apex IR report with Heading label

i have IR report with 15 column with heading..
The end user can accessing from different department, when the user can see the report shown only their particular department rows only. each department have different column value and Header label .how can display the column header depend on the department user.
e.g. IR report view
Seq# -- Department -- date -- Subject/Customer Message
1                          Communication done with Jony(from HR department)
2                          low sales from East region(from Sales Department)IN the IR report Table data structure.Heading_code value as LOV in IR form(1.Subject/2.Customer Message/ect...) and Column_value as Text Field.
Seq# -- Dept_name -- Heading_code -- Column_value
1        HR              1           Communication done with Jony
2        Sales           2           low sales from East regionApex have limitation of one IR report in one page. so i could not create different Report region even i don’t want create another page due to the further functionality issue.
Thanx,
Ram

I'm glad you could apply that approach. I'm not crystal clear on what is needed but I have a few general ideas.
1) If there will only have 3 or 4 classes (types) of users, you might try using a CASE statement in a Before Header process:
BEGIN;
CASE
    WHEN condition for 'KAC' THEN
         SELECT [first label constant or variable], [second label], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    WHEN condition for 'MIS' THEN
         SELECT [first label constant or variable], [second label], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    WHEN condition for "ADMIN" THEN
         SELECT [first ADMIN label constant], [second ADMIN label constant], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    ELSE -- default case
         SELECT [default first label constant or variable],
                     [default second label constant or variable], ...
              INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
    END;
END; NOTE: Do not make the "ADMIN" case the default. That seems like a security hole. I would always want a data check for the ADMIN case.
2) Or put the above code in an Application Process rather than a Page (Before Header) Process so it's only computed once.
Does that give you some ideas?
Regards,
Howard

Excel Outputs with Header, page breaks, margins in EBS R12, 10.1.3.2 BI Pub

Hi All,
We have most of our report outputs as Excel.
Our client is expecting a common format for outputs in excel, with header, margins, page breaks , page numbers
And some of our reports has more than 70 columns
Using RTF, we could not able to manage this. the header or page breaks are being overwritten when it generated the excel outputs.
Please let me know how to achive this.
Thanks in advance
Edited by: DharV on Oct 15, 2012 8:44 PM

Hi Rohit ,
I had copied these .class & .xml files under Myclasses -> oracle.apps.icx and oracle.apps.po and oracle.apps.fnd was same which comes part of the standard OA tutorial.
I copied same under Myprojects as well.
you have to decompile the class file into java file and then place it in Myproject directory , also copy all dependency files like BC4J components , and then
try to run from Jdeveloper .
Alternatively you can get the entire ICX folder and zip it and add it via library .
--Keerthi

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b>

Downloading the internal table with header to FTP folder

Hi All,
I have one requirement in downloading the internal table details with the fixed header line to FTP folder. The header line having the fixed text of 425 characters length.
Note: We are not suppose to use WS_DOWNLOAD and GUI_DOWNLOAD function modules.
Thanks in advance for your reply.
Regards
Kamini.

Hi,
I can download the internal table details successfully to FTP folder using the FTP function modules like(FTP_CONNECT, FTP_COMMAND , FTP_R/3_TO_SERVER and FTP_DISCONNECT). Here my problem is I am unable to download the internation table with some header text.
You can see the format (example) of file to be download.
Here I can successfully download the below details without the header. But I am unable to download with header line. Could you please suggest me.
seq_no|record_action|trans_date|sku|description|
1|N|2008-01-03 07:52:31|TTASA5025CBO
2|N|2008-01-03 10:28:33|411014
3|N|2008-01-03 10:01:03|TTASA6030CBO
4|N|2008-01-03 10:01:15|TTASA6630CBO
5|N|2008-01-03 10:01:25|TTASA7035CBO
6|N|2008-01-08 16:57:39|TT6G
Regards
Kamini.

Urgent ! XML Output with header, body, trailer

Gurus,
I am trying to use Report to output an xml file with header, body and trailer regions. However, I find that the tool does not allow me to create a header region with info like <report_date>, <report_name>, <report_desc> etc.
Moreover, the tool is not flexible that in the group level, it always automatically fills in the outer tag for me even if I intentionally leave it blank.
So, except using the XML file output function, is there any other way outputing XML file using the tool? Otherwise, I may need to hard code a program to do so!
Thanks for your advice!
Shoshi

Hi
Reports XML file is driven by your queries and groups therein. This means that the groups (and break groups) are represented in XML form.
It is not driven by the layout. So your header region does not appear.
What I suggest is that you need to create a report level formula column in the Data Model. The formula returns date, name and description etc. Since this is a part of Data Model now, it will appear in the XML output.
Regards
Sripathy

Passing an internal table WITH HEADER LINE to abap object

Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
Thanks.

Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
report zrich_0001.
*       CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
    types: t_t001 type table of t001.
    class-data: it001 type table of t001.
    class-data: xt001 like line of it001.
    class-methods: change_table
                                exporting ex_wt001 type t001
                                changing im_t001 type t_t001.
endclass.
data: w_t001 type t001.
data: a_t001 type table of t001 with header line.
start-of-selection.
select * into table a_t001 from t001.
call method lcl_app=>change_table
             importing
                 ex_wt001 = w_t001
             changing
                 im_t001 = a_t001[] .
check sy-subrc = 0.
*       CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method change_table.
    loop at im_t001 into xt001.
      concatenate xt001-butxt 'Changed'
           into xt001-butxt separated by space.
      modify im_t001 from xt001.
    endloop.
    ex_wt001 = xt001.
endmethod.
endclass.
Regards,
Rich Heilman

Receiver file Content Conversion with Header line

Hi,
Here I am doing receiver file content conversion with header line.
I am able to get the output file correct, when I open the file in notepad the header line and data appearing in the same line (not accepted).
But when I tried to open the name file in internet explorer I can see the header line and data in two different lines (accepted).
What should I do I want to see the same output in the notepad?
Please help me out.
Thanks in advance,
Srikanth.

You can use NameA.addHeaderLine.
Specify whether the text file will have a header line with column names. The following values are permitted:
0 u2013 No header line
1 u2013 Header line with column names from the XML document
2 u2013 As for 1, followed by a blank line
3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
4 u2013 As for 3, followed by a blank line
The below weblinks will help you to know the other paramters.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/686e687f2a6d12e10000000a1553f6/content.htm

I I made a PDF fie to preview, but am still apprehensive to actually order the book, as I have ordered some prints of photos after I thought i had them cropped correctly and prints returned with heads, half of bodies have a book formatted and ready to buy

I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising. I have put the book on a PDF file as instucted, please reassure me that if everything looks right there, that is the way the book will look??

If the PDF looks good then the printed copy should be OK. The only problem you might run into is the color rendering. As long as none of your photos use the sRGB profile and not the Adobe RGB color profile the color should be fine.
On those prints that were cropped incorrectly: did you copy them to the print size ordered before uploading for printing? If not then they will be cropped by the printing equipment and you'll lose part of the top and bottom of the print (for landscape prints).
OT

Is it OK to run the Audigy 2ZS card with 2.1 speakers even though.

.....they're rated for up to 7.'s?

I'm using my Audigy 2 ZS with my old Cambridge SoundWorks 2.s (the speakers that were replaced by Inspire 5300s before their remote went south) without a hitch (in Vista Ultimate no less).

PO Form Issue with Header Level Changes

Issue:
It has been observed that whenever changes are done in PO Header (e.g. Header Text), system prints Billing Address and Communications Details as blank. If the changes are made to Line Item level along with header then system prints the Billing address and Communication Details correctly.
Analyse:
we are using the SELECT statement below to fetch the field for
Billing Address and Communications Details.
SELECT SINGLE
mandt z_plant z_company_code z_toll_free_no z_local_no z_fax_no
z_email z_name1 z_name2 z_street z_house_no z_district z_post_code
z_city z_country z_vat_no z_loc_term_cond z_langu
FROM zptp_poformdata
INTO w_poformdata
WHERE z_plant = ls_ekpo-werks
AND z_company_code = ls_ekpo-bukrs .
And when we only change the header level data no value is passing for comany code and plant . as a result Select statement gets failed and we are getting blank window.
NOTE: we are getting blank box only when we fire a print or fax.The preview is coming fine.

by asking so many questions in a single post,you are violating the rule of engagement given below
Only One Question Per Posting
For each question that you have, make a separate posting. Don't ask multiple questions in one posting, this is confusing for people and might not get answered, since the subject line does not reflect all your problems. If a new and unrelated question comes up during a thread, start a new thread.

Getting error of Defining an internal table with header line, SELECT-OPTIO

Hi all,
i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
Following are the code:
DATA: BEGIN OF traptab OCCURS 50.
        INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
        blart LIKE mkpf-blart,
        blaum LIKE mkpf-blaum,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        cpudt LIKE mkpf-cpudt,
        cputm LIKE mkpf-cputm,
        aedat LIKE mkpf-aedat,
        usnam LIKE mkpf-usnam,
        tcode LIKE mkpf-tcode,
        xblnr LIKE mkpf-xblnr,
        bktxt LIKE mkpf-bktxt,
        frath LIKE mkpf-frath,
        frbnr LIKE mkpf-frbnr,
        wever LIKE mkpf-wever,
      END OF traptab.
Thanks & Regards,
sappk25

thanks

BADI cant use an internal table with header line

hi,
In BADI, we cant use an internal table with header line, and I am calling a function module which requires internal table as import parameter, now, the table I am passing is without a header line, So how to solve this problem ?

You can use a type and then create an internal table of that type.
types :
begin of t_<example>
*field list
end of t_<example>
data :
gt_<table> type standard table of t_<example>
pass this to the FM

Dynamicly creating an internal table with header line

Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping.

Audigy 2 5.1 with head

Similar Messages

Maybe you are looking for