Audigy 2 AudioHQ missing decoder tab for SPDIF passthro

I have an Audigy 2 card and am using the latest drivers and mediasource software. I have my SPDIF connection connected to the Sound Blaster Digital I/O module which has a digital out connection that goes to my home theater receiver.
I would like to do SPDIF passthrough, but when I open the AudioHQ software and go to device controls, I do not see a decoder tab. Is there a way I can get that tab to reappear? Why am I missing it's Is there a workaround for this? Thanks!

LehighBri,
You should see a SB#### or CT#### (#=number) printed white on the card and that's the general model number. To be even more specific, the actual model number is made up of the first two digits of the white number on the front and the first two digits of the black revision number stamped on the back of the card
You can see this guide on for example.
http://www.ask.asia.creative.com/wwe...del_number.htm
Jason

Similar Messages

Missing "Decoder" tab from AudioHQ pa

Dear all X-fi users?I am happy to get my X-Fi XtremeGamer Fatalty Pro Series from my local store yesterday. I did full CD installation and updated to lastest drivers "Creative Sound Blaster X-Fi XtremeMusic, Platinum, Fatalty and Elite Pro?Driver with?OpenAL support?2.09.0007 ".
I found the "Decoder" tab is missing from my AudioHQ panel, and I asked my friend who have the "Sound Blaster X-Fi Fatalty" to compare to his AudioHQ, he has the "Decoder" tab from it. The following is my PC specification:CPU: Intel e6600Mobo: Gigabyte 965P-DS4Ram: Cosair 024x2 2gb ramDisplay card : XFX 7900GS?Can anyone please help?Thank you. This picture is captured from my friend's PC[img"]http://danny.myabz.info/decoder.jpg">?This one is captured from my PC[img"]http://danny.myabz.info/without_decoder.jpg">?

The new models (XtremeAudio XtremeGamer and XG Fatalty) don't include built-in DD/DTS/MLP decoders, instead they let you download an OEM version of PowerDVD. Bad move IMO since you get OEM DVD soft with motherboards or?videocards and the built-in decoder can be used with any player capable of SPDIF output.

Missing Applications Tab

When I log on to iTunes, I am missing the tab for APPLICATIONS. I only have the following tabs: Summary, Music, Movies, TV Shows, Podcasts, Photos, Info. How do I add the APPLICATIONS tab so I can then transfer the games I've purchased in my library to my ipod touch?

One thing that might help out.
Along with neuroanatomist's post asking sure that you are running os 2.0.
Are you running windows 2000 as it shows in your profile at the bottom of your post?
If so, the minimum system requirements for ipod touch and iphone are win xp sp2 or vista.
Hope this helps.

Xfi decode tab missing - spdif soun

ok, i've spent about 5 hours going through these forums.
I have the retail version of the Xfi Xtremegamer that states I can have dolby/dts sound through powerdvd download. I have this connected to a p7800 inspire 7. speaker set.
How do I get dolby / dts sound for my movies? I have downloaded powerdvd - and I have tried to follow all the steps in the sticky post:
"Digital Connections, SPDIF and Dolby Digital Info" step 2) Decode the AC3/DTS with your Sound Blaster. or 3) Decode the AC3/DTS with software.
In powerdvd / configuration / audio tab, I have selected "use spdif". On the audio console / spdif I/O tab, the SPDIF Input Settings are greyed out, and there is NO decoder tab.
I am tesing with the dvd "The Core" with 5. dolby sound selected. On first attempt to play, I just get loud clicking sounds. If I stop the movie and then play again, the second attempt will load the onscreen display of the dolby digital bitstream logo, but there is no sound.
I've also tried AC3filter with both media player classic and zoom player.
how do i get this working? And how do i know if sound is playing in dolby or dts?

Hi?I have the same card like you , and i have this problem but i found here in forums 4 files and?copy ?them intosystem32/data folder then restart the computer i found dd/dts tabs on audio console?Thanx

X-Fi: Decoder tab miss

I'm using the "2) Decode the AC3/DTS with your Sound Blaster" option from the stickied Digital Connections... thread. The thing is, I don't get any sound although I've set it to do so within PowerDVD (SPDIF out as suggested in the thread above).
After doing some searching I found out that I need to disable SPDIF pass-through in the decoder tab. The thing is, my console doesn't have a decoder tab! I bought an expensi've Fatalty card so I don't have to worry about these kinds of things - I guess I was wrong and was reminded why I haven't used Creative products for years. Should I return the card or is there a way to get the decoder tab visible. (I tried the Dell work-around but it requires Vista.)

Hello every one, I am new to this forum.
I bought Sound Blaster X-Fi Xtreme Gamer sound card last year in August month. I just want to know whether this card does contain in-built decoder or not. Because I dont see any decoder tab in my creative console. I have searched maximum to find out the right answer but I didnt find correct answer to my doubt. I have installed the drivers came with the card. I didnt update the drivers. I am using windows xp sp3. In the forums I have read that driver update will fix this issue(DD and DTS deocoder tab will appear in the console). If so please guide me which drivers will fix or the updated drivers available on the site will fix the issue.
Thanks in Advance.

Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, Willi

I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi

K1 - Google Android Market Missing Tabs for Movies and Music

Am I missing something or does the Android Market on the K1 not offer Movies and Music? I have tabs for Apps and Books, but there is no way to rent movies nor buy songs through the market. As a work-around, I can go to market.android.com and rent movies and buy music, but for some reason it's not available within the Market App. Is anyone else experiencing the same thing?
Just so you know, I have a new K1, I've run all the system updates, and I'm not rooted.
Thanks in advance.

That explains the versioning of the Android Market app on K1. I thought it was odd that it was 1.0.28... whereas Google support always refer to version to Android Market version 3.3+.
I've been looking for the latest Market to get the PIN/parental controls. On a side-note/rant -- With the existing Android Market, my younger one has already made some in-app purchase charges playing with a game from GAMEVIL (BTW for K1 owners DO NOT DOWNLOAD GAMEVIL games ie AirPenguin if you have young ones. Their games make it easy to purchase items and they were not refunding it. Apparently I'm not alone if you look at the 1 start reviews. I've already lost $$$ which I'm trying to get back... In the meantime I advise anyone with Google Wallet accounts to remove their Credit Card)
Lenovo, please put an updated version of Android Market in your next update!!
Builds:
01/18/2012 - K1_A301_14_14_120109_US
01//2012 - K1_A301_13_13_111209_US
12/2011 - K1_A301_12_12_111109_US

I am missing the iTunes Store Tabs for Music, Movies, and TV Shows. How do I add them?

I am missing the iTunes Store Tabs for Music, Movies, and TV shows. How do I add them?
It is very strange especially not having the Music Tab. I desperately want to download music...
Please help, anyone please, thank you.

To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
To go back to your question; you cannot merge accounts, but perhaps using one account for iCloud and the other for iTunes will resolve the majority of the reasons you needed to merge to begin with.

Can't find the 'decoder' tabe in audio console wind

I just bought a x-fi fatalty. All drivers was installed.
However when I tried to set the spdif passthru to an external AV amp, I can't find the decoder tab in the audio console windows as shown in below screen capture I found on the web.
http://soundblaster.com/images/inline/articles/audio_console.jpg

Hi adrianmak?If you use spdif don?t need X-Fi decoder, when use spdif you send signal to a external decoder. Digital Connections, SPDIF and Dolby Digital Info[/b] ?Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded?audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To?go down this route, you must first have a?set of speakers or a decoder that?supports Dolby Digital.
In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in?your?soundcard options. What this does is?tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your?digital speakers/receiver will do all the decoding to give you full surround sound.
Please note that this?is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.?If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature,? you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right?sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=270">[/url]?What version you have?Try to update drivers from creative, MS Windows Update X-fi driver version?disable decoder tab.
Message Edited by Rad-Wulf on 2-04-200709:26 PM

HELP! My Audigy 2 does NOT decode AC

Greetings everyone!
I'm having a really big problem here that I need help with. The SBAudigy 2 sound card that came with my Dell Dimension 8400 does not seem to want to decode the Dolby Digital AC-3 audio on my DVD movies. Cyberlink's PowerDVD DX 5. that shipped with the system obviously doesn't do it as it's just a basic version of the program.
I know for a fact that my speakers are set up properly because I have some 5. channel WAV files that play properly when I run them in WinAmp. Plus, I get discrete 5. surround in pretty much all the EAX enabled games I've played so far. So this is NOT a speaker issue.
Now, I've check Creative's extensi've knowledge base and what little documentation was provided with my Dell 8400 for the Audigy 2 (basically, just the Getting Started Demo). EVERY PIECE of information I have looked at clearly states that the ALL Audigy 2 sound cards are capable of decoding AC-3.
However, for some ungodly reason, mine cannot do it. I have explicitly followed the instructions on how to turn on hardware AC-3 decdoding, but for some reason, that DECODER tab wherein I'm supposed to enable AC-3 decoding doesn't exist!!! And I should point out that I HAVE all the latest drivers for my Audigy 2.
So, can anyone help me here?
Mad Cat

Catherina-CL wrote:
If the card doesn't decode AC-3, you should still be able to with an application like WinDVD or PowerDVD, as these can decode the sound aswell (if you set the audio option to 5.).
The specs on OEM cards supplied by Dell can differ from the retail cards, so it's possible yours doesn't support AC-3 decoding. If you can post up the model number (and the first few digits of the serial number), I'll see if I can check this up for you.
Cat
Thanks, Cat, but I'm not up for prying open my PC at the moment. Is there a way I could check the model number without opening up the PC?
On the issue of WinDVD and PowerDVD, you have to pay for the software. Dell ships a watered down version of PowerDVD with their machines that does NOT decode AC3, thereby trying to force you to buy the upgrade to the full version 6 which, upon reading the specs on Cyberlink's website, may or may not have a software decoder for AC3 (the website seems to imply that it can get the speaker system to decode AC3).
Mad Cat
Message Edited by MadCat on 05-03-2005 0:33 PM

ITunes on my iPod Touch is missing some tabs

Can somebody help me?
I have:
+ iPod Touch 4th Generation 32GB
+ Wi-fi connection
+ iOS5 installed
iTunes on my iPod Touch is missing some tabs. The only tabs that's showing on my iTunes are Podcast, iTunes U, Search and Downloads
Also, whenever I try to load un Podcast tab, it ALWAYS say Your request could not be completed.
Thank you very much!

Where exactly are the tabs that are showing, are they a list at the bottom of the page and next to it is the "More" option, or are you referring to the options on the More tab? You can move these options between the bottom of the page and the More section.
Is that the problem, or is there something else missing? (Perhaps it would have helped if you had mentioned what is missing). If it's the Apps section you are looking for, it has its own App button on the Home screen.
As for the problem with downloading Podcasts, I would try getting them in iTunes on your computer if you cannot download them via the Touch's Wi-Fi.

Adding item data in Product tab for sales contract (crm_order_maintain)

Hi, can I use crm_order_maintain to add line items under the product tab for a sales contract while creating or modifying an order. Is there any sample code to add the line items, I could look at. I tried calling this FM from my custom tab and then called CRM_ORDER_SAVE but that did not add the line item. I guess I need to call it from the order_save badi and then call the crm_order_save FM as well from within the BADI. If someone could send me some sample code then I can double check if I am missing something.Am I on the right track to be using this FM for adding a line item under the product tab for the sales contract? Please help. thanks

Hi, I've encountered the same problem while I was creating a Sub-Contract from a Master Contract.
In my case the solution was:
first create the Sub-Contract,
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      CHANGING
        ct_orderadm_h     = i_ctorderadm_h
        ct_input_fields   = i_ctinput_fields
        ct_doc_flow       = i_ctdoc_flow
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    READ TABLE i_ctorderadm_h INTO wa_ctorderadm_h INDEX 1.
    APPEND wa_ctorderadm_h-guid TO i_objects_to_save.
in wa_ctorderadm_h-guid now we have the guid of the newly created Sub-Contract.
SELECT SINGLE it_type_to
             INTO v_it_type_to    " --> target item type
             FROM crmc_it_copy_ma
             WHERE it_type_from = wa_out_orderadm_i-itm_type.
     Prepare tables
        wa_ctorderadm_i-header =
        wa_out_orderadm_i-header.   "Retrieved from CRM_ORDER_READ
        wa_ctorderadm_i-handle = '0000000001'.
        wa_ctorderadm_i-number_int = '0000000001'.
        wa_ctorderadm_i-product = wa_out_orderadm_i-product.
        wa_ctorderadm_i-ordered_prod =
        wa_out_orderadm_i-ordered_prod.
        wa_ctorderadm_i-description = wa_out_orderadm_i-description.
        wa_ctorderadm_i-itm_type = v_it_type_to.
        wa_ctorderadm_i-order_date   = sy-datum.
        wa_ctorderadm_i-itm_language = sy-langu.
        wa_ctorderadm_i-mode = c_a.   "c_a = 'A'
        wa_ctorderadm_i-header = wa_ctorderadm_h-guid.
        APPEND wa_ctorderadm_i TO i_ctorderadm_i.
        wa_input_fields-ref_handle = '0000000001'.
        wa_input_fields-objectname = 'ORDERADM_I'.
        REFRESH i_input_field_names.
        wa_input_field_names-fieldname = 'DESCRIPTION'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'HEADER'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'ITM_TYPE'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'MODE'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'NUMBER_INT'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'ORDERED_PROD'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'ORDER_DATE'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_field_names-fieldname = 'PRODUCT'.
        APPEND wa_input_field_names TO i_input_field_names.
        wa_input_fields-field_names = i_input_field_names.
        APPEND wa_input_fields TO i_ctinput_fields.
After that I've called function 'CRM_ORDER_MAINTAIN', to copy the Items from the Master Contract.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_sales          = i_sales
          it_schedlin_i     = i_schedlin_i
        CHANGING
          ct_orderadm_i     = i_ctorderadm_i
          ct_input_fields   = i_ctinput_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
Maybe if you're not working with Contracts, the procedure is not properly correct.
I suggest to put a break-point into crm_order_maintain and try to add the Item manually.
If you reproduce exactly the standard, I'm shure it will work.
Lorenzo

Windows 2003 server loses security tab for folders created in OS X

We have a centralised storage system that is running on a Windows 2003 cluster. This server has folders for each department so they can store colaborative work. They can create their own folders and files within their departments folder.
When files are created using a Mac on this service and then the folder properties are viewed under Windows XP or 2003 the security tab seems to be missing. NTFS permissions still exist on the folder as items beneath that are inherriting permissions still have those inheritted permissions applied to them, but the security tab has gone.
This can also mean that Windows users cannot see these folders and therefore the whole idea of a collaborative storage server is lost.
We have investigated this issue as best we can so far and tried copying folders onto the server with whitespace at the end of the folder name to see if this was the problem, it does not appear to cause the issue.
We have also tried copying folders up to the server from a mac using invalid characters \ / * ? " | were all tried, on the server the symbol is simply substituted with a space and the folder works correctly.
We have tried copying a folder with space at the end of its name and a file within to the server and this also works correctly.
The only common factor seems to be that a lot of the folders with a missing security tab have a single space at the end of the folder name, however this does not seem to cause the issue.
One way around the problem is to use the subinacl.exe tool at the command prompt as the server administrator to regain ownership of the folder and then delete it, however this is not a solution for folders that contain data. This workaround was from the microsoft article http://support.microsoft.com/kb/320081 in step 6.
If anyone has any idea what may be causing this on the Mac side it would be good to know.

We have narrowed down the problem and found the culprit.
The issue is only repeatable on 10.4.x (we used 10.4.11 for testing, but it may affect earlier versions as well)
10.4.11 Local folder created with trailing space in the name, then copied to the Windows 2003 server = loss of security tab on this folder
10.4.11 existing folder on the server has a trailing space added to the folder name = loss of security tab on this folder
10.4.11 existing folder on the server has the trailing space REMOVED from the end of the folder name = security tab returns with permissions in tact
10.5.x Local folder created with trailing space in the name, then copied to the Windows 2003 server = no problem
10.5.x existing folder on the server has a trailing space added to the folder name = no problem
10.5.x existing folder (created under 10.4.11) with trailing space in the folder name has the space removed = Error code 43, unknown error occured
Also interesting is that the illegal characters for Windows \ / * : ? " | in the folder name prevent the folder being copied to the Windows 2003 server in 10.4.11, but are allowed in 10.5.x - all expect the : which is an illegal character in OS-X as well. None of these illegal characters cause issues on the Windows 2003 server as they are simply translated to a space.
The solution would be either as AJ mentioned to purchase Thursby AdmitMac or to upgrade all the users to 10.5.x (which I'm sure would make Apple happier!)

No Dolby/DTS decoder tab in audio console after installing new driv

Using X-Fi Elite Pro and Vista 64-bit /w new 2.8.0004 drivers. Notes in the lastest driver says that Dolby/DTS encoding is enabled for Vista, but I'm not seeing the decoder tab like other people have. Can I still decode with my soundcard using method 2 in this thread

doughnut wrote :
I don't have decoder tab with X-Fi XtremeMusic either in Vista x64. Is that normal And what does that "Dolby Digital and DTS decode re-established for sound cards that included decoding in their Windows XP drivers" feature introduced with latest X-Fi drivers mean if there's no decoder options at all
I have the X-Fi XtremeMusic soundcard and Vista Ultimate x64 SP, I get the decoder tab in both creative audio console and Creative Console Launcher (All modes). In order to get the Dolby Digital and DTS decoder tab in both creative audio console and Creative Console Launcher (Entertainment mode, game mode, ect) you have to install the following. Later, you can buy the Dolby Digital Li've as a add on.
Creative Sound Blaster X-Fi series Driver 2.8.0004 and Creative Console Launcher 2.60.29

Missing Subject line for the Approval Notification Mail

Hi,
We use CUP 5.3 SP7. We have configured the system for role based approval. We found that the approval notification mail being sent without any Subject line. It's configurable to set the admin mail id, but couldn't find one to set the Subject.
We get the following content in the mail....
View <http://<host:port>/AE/index.jsp?verifyApproverLogin.do........................>
Can we set it somewhere from the configuration?
Regards, Anil

Hi Alpesh,
Thx for your reply..But i think you missed my point...Let me try to explain it again...
When we submit a request, the system triggers a notification mail to the approver(s). And this mail seems to be missing a Subject line... and it's shown to be sent from the System E-mail id we set at the SMTP server config.
I couldn't find a tab for setting the E-mail format for the first approver neither at the stage nor in the e-mail reminder configuration.
Perhaps, setting the next approver will help if i had a secondary approver. But we are using a single stage WF in CUP. Am i missing some config step here?
Regards,
Anil

Audigy 2 AudioHQ missing decoder tab for SPDIF passthro

Similar Messages

Maybe you are looking for