Audigy 2 conflict with Nor

Occasionaly when pc boots the norton utilities auto protect doesn't load. A message states that there is a known conflict with audigy 2 media go centre and norton 2005. Right click on the go centre and then click close. Sometime this works and sometime it doesn't.
Any suggestions
Win xp-sp2

Dale 5605, try what they suggested at the top of the post regarding the cleans removing of all norton and creative software from your pc go to the link suggested and print a copy od the "clean sweep un-install of sound blaster audio cards". I followed all directions and then reloaded all soundblaster item, then the norton items> my Norton utilities auto protect now loads up all the time, every time. My only problem now is I cannot get creative media organizer or player to work, it states the my music library is corrupt, even though media player plays all music files the creative palyer will not work. I have downloaded the jet item from micro soft as suggested, reinstalled the creative software but still cannot get the creative organizer or player to work, I'm waiting to hear from the mods on possible fix's.

Similar Messages

SB Audigy 2 ZS Conflict with Unreal Tournamen

Hi there, I've been able to determine that my SB Audigy 2 ZS card is creating some sort of conflict with Unreal Tournament 3.When I disable the soundcard in the device manager, the game will load. Otherwise, the game will not load. I've downloaded the latest drivers for the sound card and video card, and have tried reinstalling UT3. Anyone have any Ideas where this problem is coming from ?Here are my tech specs;Intel C2D 3Ghz @333 FSBAsus Maximus Formula MBEVGA GeForce 8800 GTS 640MB2 GB Crucial Ballistix DDR2 033SB Audigy2 ZS Platinum?WD Caviar SE6 SATAII 500GBAntec Neopower 650wWindows Vista 32 bitDirectX 0?This is a link to a discussion thread I posted on the issue in the Unreal 3 Tech Support Forums;http://utforums.epicgames.com/showth...=600409&page=2?Message Edited by odin_tyralothe on 0-26-200806:49 PM

calcal wrote:
well there was a great deal for this so i took it. This is a great card and i love it but theres a problem. Id say out of 5 cold boots or restarts, my usb mouse will not work. This happened after i installed my new sound card.Message Edited by calcal on 08-3-2005 0:57 AM
I suppose, your sound card is sharing an IRQ with your USB controller.
Try moving your mouse into another USB port(s). If this don't help, you can re-install your sound card into another PCI slot (see on your motherboard manual how IRQ's are assigned for PCI slots). PCI slot 3 or 4 (count from AGP) are normally less shared.
You can check your IRQ sharing situation from device manager - device manager -> View:resources by type -> interrupt requests (IRQ)).
You can also disable controllers/devices on device manager (right_mouse_click the item you want to disable(/enable) and select disable(/enable). Do this only if selected controller/device is not needed and it is sharing an IRQ with controller/device you need.
this so far...
.jtp

Conflicts with Lulu

With the original release of 'Pages', there is a known conflict with www.lulu.com ( a book publishing site). Apparently .pdf files created from within 'Pages' do not embed Fonts correctly and a 'work around' is published at http://www.anvilwerks.com/pages_workaround/
Does anyone know, whether the new updated version of Pages has corrected this problem?
Regards... Chas

Magnus, I appreciate your support of Apple. I'm a raving fan myself. But this isn't my problem. Consult the web. There isn't a single professional commercial ripping software (the software that printers use to parse PDFs and prepare them for their printers) that can parse these PDFs. Not one. And this problem began with the introduction of OS X. The only reason that you may not have heard about this is that most high end graphic designers on Apple platforms use Adobe products, like Pagemaker or InDesign now. And--of course--Adobe products can create PDFs that can be read. So those people don't ever encounter this problem. Because of course Adobe PDFs are compliant with Adobe's standards. (Unfortunately you can't even use the "print to" option to use the Acrobat Distiller from the Pages print dialogue. Somehow Pages overrides the settings and forces the distiller to create multiple redundant subsets.)
Where the problem got magnified is with the advent of Pages. Here's why. People see Pages as a layout and design software "for the rest of us." And rightly so. This, I believe, is Apple's intent. So a lot of people have started using it in the past two years.
Some of those people switched from Microsoft Publisher--which, while not a professional layout program--is a ton easier to navigate than InDesign. Some of these people expect to be able to print with a commercial service. So when they go to try, they use the native OS X PDF creation tool, and then discover to their horror that not all PDFs are created equal.
Now professionals know this, but your average user does not. They're just told that PDFs are a universal format. Everyone can open it and read it. They send of the doc to be printed and it won't work. I tell ya, Magnus, this problem is out there on the web a thousand times and thousand times.
Subsetting is a useful tool. It reduced PDF file sizes. That was critical when we were all using dial-up connections. It's still helpful today on large documents. But all I'm asking for, all these people need, is a switch somewhere that allows it to be turned off. That's all. Nothing more. Just a switch that allows it to be turned off. You need three basic options: (1) Embed the entire font whole, should the permission bit allow it. (2) Subset the fonts to save space. or (3) Neither embed nor subset, forcing the document to use a Multiple Master font (Arial, Times NR, etc.)
I've decided that I will have to re-layout my booklets in InDesign. I know the file will be accepted just fine. That solution works for me, but it isn't a good one. Adobe CS2 costs nearly $700.00. I own it, but most desk-top publishers do not. The people that Apple is targetting with iWork generally do not. I can invest the several hours necessary for this task. But it's too bad that I have to.
After a lot of research I learned that Apple switched to forced subsetting after they had a problem in their PDF generator with embedded graphics. Somehow this change fixed that problem. But it created--in my opinion--an even larger one. If you can't get your PDF to print with a commercial printer, what's the point?
While I've already started on my InDesign revision, I'd still like to see or hear a solution to the problem. There are a lot of people who love Pages (and I hope it will continue to grow and evolve to the point where I never have to use a Microsoft product again...) and want to use it for all their layout needs. Right now this is a roadblock that will keep this from happening.

X-fi xtreme gamer fatal1ty conflict with Asus A8N SLI Premium Mobo with Nvidia nForce chip

i have had my x-fi for a few months now and ever since installing it there have been constant system hiccups, blue-screens, and performance locku
ps.
my system was perfect running the audigy 2, but the x-fi is messing everything up.
i have read about the conflicts with the nvidia chipsets and the x-fi drivers and have yet to find a solution. i love the quality of the sound from the card but i cant deal with these issues any longer and am going to return it if there is not some sort of solution.
it seems this problem is well known and has been for quite some time, i cant understand why creative hasnt released a patch for the drivers of the card.
if anyone has any suggestions for me i would really appreciate it so i dont have to yank the card out and return it to newegg.
thanks very much.
-Art

In all seriousness, return the card. Do it NOW because you still have the chance to. Don't wait until it's too late.
Then after that, if you are curious why I say that, do some searches about other issues everyone is having and Creative not being very responsi've.
Search (either here or use Google for external websites) for "ha20x2k.sys" and "BSOD" (or a combination of both). "Crash" and "BF242" or even other games such as WoW and CoH - just be (pun not intended) creative.
Don't be like the others here (like myself), who own a very expensi've paper weight. Sure you can continue to use it for listening to music, but that's like buying a sports car and just being able to use the stereo.Message Edited by naddie on 04-2-200706:54 AM

Conflict with Linksys Wireless C

I've recently installed a Linksys Wireless Networking WMP54G card in my desktop and apparently it is conflicting with my Audigy 2 Soundblaster card (i.e. each works fine by itself, but the system keeps re-booting if they are installed together and won't boot into Windows XP at all).
I'm using Windows XP Professional with Service Pack 2 and Linksys tech support has been no help at all, simply telling me it's an OS issue and there's nothing they can do. I already tried manually assigning IRQ numbers to each of the PCI slots in the BIOS, but that doesn't seem to have done anything, since when I view "System Information" in windows, the IRQ for both the Linksys card and the Audigy are changed to IRQ 7 (instead of 0 & , as I had manually assigned in the bios).
Does anyone know if there's a way to change the IRQ setting on the Soundblaster Audigy 2 card, so that it doesn't conflict with my Linksys card? Or, alternati'vely, is anyone familiar with any XP settings that I can change to get XP to assign a different IRQ to the Soundblaster card?
At least a link to any possible information would be very much appreciated. It's been three days now of trying to get these two cards to work together and I'm about to throw the whole thing out a second story window!
Thanks!
:angry:

check your bios if the option Plug&play os is enabled.
This because Linksys is right, windows handles the irq/dma sharing automatically.
And as you experience not always the right way.
Maybe you can move one of the two cards in another pci-slot(move them as far as possible away from each other(Linksys+Creative card).
i guess you can better contact M$...(if you've a legal windows).
Or try a Linux boot cd(li've cd linux that runs from cd like knoppix). Because if you've the same problem with a linux li've cd then it must be a hardware issue, if it works fine with Linux Li'veCd then it's a Windows issue like Linksys try to explain.
knoppix li've CD: (download image and burn it to cd-r, then start computer(boot) with this cd-r in it)
http://www.knopper.net/knoppix-mirrors/index-en.html
oh "and I'm about to throw the whole thing out a second story window!" advise: throw the soundcard away!
p.s. congratulations with your Wireless Fidelity hardware...WiFi=freedom !!!(compared to commercial isp's)Message Edited by www_96KHz_tk on -4-2005 2:05 PM

Verizon Quantum Gateway has conflict with Airport Express

Does anyone have a problem with the Verizon Quantum Gateway in conflict with the Airport Express.

ranamaska wrote:
Can you tell me exactly how to do this?
Or
Should Verizon have this instruction for me to find?
Just ignore the verizon.. it really should not be a major issue.
If you are having problems fixing the channels in one router should then solve the problem by forcing the other router to use different channels.
I cannot tell you how to fix the verizon anyway as I have no idea what it is nor can i get one to play with.
Anyhow reset the Express to factory and start over.. the utility get it right most of the time.. and all you need to do is tweak the values.
I strongly recommend you use all short names, no spaces and pure alphanumerics.. password the same but 8-20 characters.
So do the setup with Express WAN port plugged into the LAN port of the Verizon router.
When you are finished.. click on the Express in the airport utility and click on Edit.. I don't have an express but the setup is identical for my Time Capsule.
When you click edit you will get the full manual setup.
Looks like this.. first tab is Base Station where you set name and password.
Go to the Network tab.. it must be bridged.
Go to the Wireless Tab. And you must Create a wireless network..
Down the bottom of that page is wireless options.. (sorry I cut it off in the screenshot).
This allows you to set a different name for 5ghz.. up to you.. I prefer doing this but it is perfectly fine not to.
At the bottom it shows wireless channels are set to automatic.
Click that and fix it ..
Here is my actual current setup.
Once you complete this setup.. you can reboot the Verizon modem router.. that will give it a chance then to reset its wireless and you should then be able to clearly see what is happening..
Use the tools apple has given you .. in Mac OS since Mountain Lion an excellent wireless survey program is built in.
About Wireless Diagnostics - Apple Support
Start the utility and do a scan and then you will see all the channels and signal levels you have available in the area.
You can also check the performance of the link you are using.

K7N2 DELTA ILSR has conflicted with ram....

K7N2 DELTA ILSR has conflicted with this ram....
http://www.kingmax.com/product/pro_superMPXB62D-383.htm
I got 2 * 256MB DDR 400 of the above ram.
Is there any conflicted with K7N2 DELTA??
amd 2500+
thank you
BIOS version 7.4

Quote
Originally posted by utada
I have already brought kingmax
These boards are very picky with RAM. As Bonz has pointed out their is an approved list near the top of the Forum but unfortunately I don't beleive Kingmax is on it. Sometimes the generic RAMS run, sometimes not. It seems to be hit or miss. If you want a recommendation of good quality RAM I would suggest MUSHKIN first and CORSAIR second. Good Luck
Rob

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

Robo 8 HTML:
Can somebody assist me in understanding how to rename a topic ID in my map.h file?
An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
#define Open    59
#define Save    60
#define Print   63
#define Cut     72
#define Copy    73
#define Paste   74
#define Clear   75
#define Status 81
#define Substructure 139
Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
Any assistance with this question is greatly appreciated.
Thanks,
robert

Hi,
Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
<u>Downgrading Firefox </u><br />
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
<u>Try Flash with Protected Mode Off</u><br/>
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
<u>Your experience in submitting troubleshooting information on the forum</u><br />
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Do I have a conflict with iTunes 7.6.2 . . or what ?

Dunno if I do or not, but . . shortly after upgrading to iTunes 7.6.2 we suffered a power "Blink" . . and when i noticed it had happened the Mac was attempting to restart . . with a blinking Mac, then a question mark in the icon . . nothing else . . In the past I've seen it once before, and a shutdown and restart was all that was necessary . . This time . . NO . . Nada, same deal, through 8 restarts . .
I finally reinstalled OSX 10.1, and followed with all the updates directly from Apple . . using the "Update" command under the apple . . It now does "funky" things . . like, one, it doesn't recognize the WD External HD on the desk top, but it does in the system profiler . . another, once in a while a dialog box comes up asking what to do with a disk, initialize, eject or ignore . . and probably what leads me to believe it could be a conflict with iTunes is during shut down, iTunes will not "Quit", even when using "Force Quit" . . it will close the desktop, go to a blue screen and then start up again . .
And . . I'd really like to install 10.4 but I can't seem to find anyone with a legal one for sale . . I called Apple a week ago and they said they might produce them in four or five weeks . . what's my options here?

None the less . . we still gots gremlins . .
And while I'm asking . . how come Safari is so fragile? The other nite, my wife and I were making reservations and one motel group's site crashed Safari just about 2/3ds the way through opening every time we tried . . went over to Explorer and it opened about twice as fast and operated smoothly . . This happens a lot at different sites . . always wants to know if I want to report it . . To Who?
Is 3.4.11 going to exorcise those gremlins or do I have to hire some IT Guy . . ? I've owned a Mac of some kind since the Mac IIx, (about 5, I think) but it's a tool, not a toy to me . . I just drive it . . run McJanitor once a month, clean out the icons in Safari's library and all the little maintenance thingies, but I'm no troubleshooter . . .

Audigy 2 conflict with Nor

Similar Messages

Maybe you are looking for