Audigy 2 drivers that w

So CL, are you planning on making drivers that work with Audigy 2 so that all of us with the Audigy 2 cards can play our games again with the same great performance we had before we installed Vista?The newest drivers you have for the Audigy 2 dont work like they did with XP. LOW SOUND, CRACKLING STATIC, NOT 5. ETC ETC. ITS NOT MY MOTHERBOARDITS NOT MY FAULT I INSTALLED VISTA
YOU NEED TO MAKE THE DRIVER WORK FOR ME
ITS FUNNY HOW IT ALL WORKED IN XP?MAKE A NEW DRIVER FOR THE AUDIGY?2 THAT WORKS

Have you checked your memory? It is quite possible that your RAM is causing the problem, despite the fact these errors only come up with the Audigy installed. Use Memtest, or search Microsoft and find the Windows Memory Diagnostic. If that is not the problem , then you?can try the following options in your BIOS:
Change the "Plug and Play OS" field to either Yes or No?and then select "Reset Configuration Data" if that option is present.<
Change the AGP Aperture Size. Usually a 256MB setting is best, but play with it to see if it makes any difference.<
Disable any onboard devices you are not using, ie. Serial Ports, parallel ports, PS/2 etc. This will free up memory and IRQ resources.<
If these options do not help, you can try changing the PCI Slot your card is plugged in.
PS:? For more information about the error read this article.
Message Edited by alexs3d2 on 03-4-20060:0 PM

Similar Messages

  • Installing Audigy Drivers on XP pro via group polic

    Hi
    We have a suite of machines in our music dept which run XP Pro and which contain Sound Blaster Audigy Cards. Our normall practice is to create an msi package from a machine which works, then use that to push drivers/software whatever out to the other machines. I can create an msi for the SD Audigy drivers and software ok, but when I try to install that on an machine via a GPO the drivers will not install.
    Has anybody else had this problem and solved it's Becuase otherwise I'll have to install the sound drivers manually. If I do this then I have to install all the music apps the same way as they will all require the drivers to install. I'd rather not do this: we have 7 now, but when we have 30 ........
    andy

    Have you asked in groups which are focused on system administration of XP, too? I think that's more likely to be fruitful than here (you should ask here as well, because someone else could indeed have direct experience with the Audigy case).
    -Dave
    [email protected]

  • Sound Blaster Audigy Drivers and Applications CD-Rom

    Does anyone know where I can get or download?the "Sound Blaster Audigy" "Drivers and applications" CD-rom?
    I have included a pic below:
    <img alt="cd-rom" src="http://www.geocities.com/pershingbpa/soundblastercd.jpg" align="left[/img] width="70" height="705">

    jay23,
    First extract the RAR file you downloaded using WinRar. During the extraction, WinRar will create an ISO file which is an image of the installation CD. If you don't want to burn that ISO file to a CD, then download and install MagicDisc from the link I gave above. MagicDisc lets you mount an ISO file as a virtual hard dri've. You should be able to install from that virtual CD just as if it were a real hard copy CD, but I've never tried that so can't say for certain.

  • Release dates of Audigy drivers for Windows 64bit Edit

    Hello,
    Just wondering if anyone has a more accurate date of when x64 drivers will become available for Audigy cards (I own a SB0090 if that is of any use.) I don't know how long I'm going to last with no sound
    Thanks!

    Hi Milstark,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand you want to know if there will be Win 8.1 drivers released.
    I will be happy to help you.
    Here is the URL for Win 8.1 32 bit drivers that are available.
    HP LaserJet Full Feature Software and Driver.
    This is a Link for the Win 8.1 64 bit drivers.
    HP LaserJet Full Feature Software and Driver.
    Please clarify if you aren't able to install the printer.
    Are you getting any error mesages?
    Printer isn't being detected?
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Non-beta audigy drivers with OpenAL support. Wh

    Is there going to be any official drivers for the audigy that supports OpenAL? The beta drivers have been out for over three months. I have had a lot of problems with audigy drivers before so I don't want to risk installing beta drivers. The latest official drivers are from March 2004 so it almost seems like the audigy drivers aren't updated any longer.

    They say beta since they don't run some of the software like EAX Console, Speaker Settings, etc. But the new Audio Console gives you all the settings for the stuff that the beta driver won't play nicely with.
    They are WHQL Microsoft certified. So they are really final's. It's possible that no final version may ever be issued, just maybe more beta's, since Creative probably doesn't want to deal with masses of folks complaining about some of the older software not running anymore. But they are final drivers and completely safe. Just uninstall the older drivers, install the new ones, then install the Audio Console. Surround Mixer, Soundfonts, the Volume Control, the EAX Control and Device Settings in AudioHQ will all work. But I would make a shortcut to Audio Console as you really will only need that and the Surround Mixer to control what you used to need all that resource hogging pretty GUI software for.
    If you already have the Audio Console installed I would uninstall that before you remove the old drivers and reinstall it after the new drivers are installed.
    The new MediaSource stuff all works with the new driver too.
    If you want this all in 2 packages (the Audigy 4 Pro UPax tweaked cd and the Creative beta driver tweaked to work with it) you can read the audio threads at driverheaven.net. Uninstall everything Creative. Then you uncheck Windows Drivers and Audio Console in the Audigy 4 cd install and after rebooting install the UPax Creative driver mod, reboot, install the Audigy Entertainment Center update only if using a Platinum breakout box, then install the latest official Creative Audio Console.
    So you have several options. I still use only the official non beta Creative stuff since I'm not using any of the newer OpenAL games. I've read that the newer beta's improve the sound somewhat, but everything sounds great as it is.

  • Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

    I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
    Or, am I just misinterpreting this?
    Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
    Daddy-O
    One should welcome adversity as an opportunity to excel.

    Hi Daddy-O,
    Thank you for contacting National Instruments.  This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable.  In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver.  This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward.  Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here.  From this installer, you should be able to select FieldPoint 6.0 and install this software.
    I hope this helps!  Let me know if there is anything else I can clarify.  Have a great day!
    Jason W.
    National Instruments
    Applications Engineer

  • How do i recover the drivers that came with the delivery? (Dolby problem after 8.1update)

    Hello there community!
    I have a burning question.
    I recently bought a thinkpad edge 540. Which came preinstalled with windows 8.
    When i updated to 8.1 I lost my dolby audio, this seems to happen a lot more, reading through this community.
    There is a solution for that, to just reinstall the audio input and output device with the drivers that came with the delivery. However, and here is my problem.
    In the solutions given, they are talking about a section on the hard drive that should contain the drivers. In most cases E:\DRIVERS.
    Unfortunately, thats not the case with me. I know there is a recovery partition, but i cant see it within windows.
    I used this to reset to the factory defaults already, but i cant find a drivers section.
    Im hesitant to update again to 8.1 now, because it gave me several issues. One of them was the intel wifi driver, which was hard to resolve in the beginning, but also now the DOLBY audio.
    Can anyone tell me, where to find the drivers? or is it just not possible?
    I dont have a drivers section, or partition on my hard drive anyway..
    Can you guys please help me out? Since i like the dolby feature, and it would be a shame to not be able to update to 8.1. (safety issues and features).
    I know there are more people encountering this problem, but the solution to just use the preinstalled driversection.. is not an option for me, sadly. Or perhaps I am wrong..
    Any help is greatly appreaciated! Thanks guys!

    You could try contacting the iTunes Music Store Customer Service and you may be able to persuade them to sanction a second free download however they are not under any obligation to do so. The policy on lost songs is that you have to pay to download them again:
    "Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage."
    You can email them from any of the links on this page: iTMS Customer Service

  • TX1120US, Windows 7 RC and drivers that work

    Is HP planning on offering Windows 7 drivers that work with the TX1120US Pavilion Laptop?  I was recently warned that my Windows 7 Beta needed to be upgraded to Windows 7 RC (by Microsoft) and so.... I forged ahead.  However, many of the devices on the TX1120US are not working?  A big for instance, I tried to use my projector with the Windows 7 OS and the projector did not recognize any signal coming fromt the VGA port.  Another is that I can't adjust the display from standard VGA!. Other items don't work either.  I tried using Vista 32 drivers and the install program for the drivers stated that the OS (Windows 7) was not recongized.  Help!
    Thanks

    I installed 7RC on my tx1120, and had similar problems, then today when I ran Windows Update there were two sets of drivers from Nvidia that clear up most of the problems I was having with drivers on the TX -- including the screen resolution problem you mentioned.  There is still one driver missing -- (i.e. one "unknown device") I keep on getting the "dingdong" sound when a USB device is inserted -- I suspect a problem with USB drivers is causing this... however, it doesn't really interfere with my usage of the TX.  The touch screen is working, to the extent that I've tried it, I never use the touch screen for entering text.
    On another thread, I noticed an HP support person chime in that HP would offer an upgrade path when Microsoft releases 7 later this year.
    /p 

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
    On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
    My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
    The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
    Can you please:
    1. Explain why this problem occurred. This is so annoying.
    2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
    3. How can I prevent similar problem with he subsequent version?
    Why Apple don't make this update standard as other update?
    Support please. Thank for response in advance

  • RAID drivers that support Windows 2003 server for Qosmio G30-153

    Hi,
    Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
    Thanks in Advance.
    Abdul Hameed

    Hi
    Windows Server 2003 should support the XP drivers.
    So try to search for the RAID XP drivers!
    regards :)

  • Drivers that are currently installed but its not familiar and theres no drivers being inserted

    please help me what should i do.. is that a virus?? cuz i been seeing this drivers in my laptop but i havnt partitioned or inserted any drivers but then i still see drivers that are not familiar with me...theres 3 drivers or more please im afraid that
    y laptop might have infected

    Hi,
    What are these drivers? and what's your problem?
    To detect misbehaving drivers, please attempt to run Driver Verifier.
    http://support.microsoft.com/kb/244617/en-us
    Andy Altmann
    TechNet Community Support

  • Mac Pro crashing with BootCamp 3.0 drivers that came with snow leopard

    I have a 2008 (early) 2.8ghz Mac Pro. Additions are 2 500gb HD for 1tb software RAID 0, and stock 320gb HD. Running boot camp with windows vista on the stock 320gb HD. No probs with bootcamp 2.1 but when upgraded to bootcamp 3.0 drivers that came with snow leopard. Computer crashes and does not boot past the windows symbol just before login prompt. Also does a crash dump and restarts.
    Reformatting drive and reinstalling Vista with 2.1 drivers have no problems.
    Please help!

    Apple technote on renaming AppleHFS.sys - the read feature for HFS volumes.
    The faulty HFS driver is a valid concern.
    It seems to happen on many systems.
    You find it in Windows/system32/drivers/AppleHFS.sys
    Renaming to AppleHFS_disabled.sys will avoid the blue screens until you have found another solution or Apple updates Bootcamp 3.0.
    If the system crashes before you can edit the name you can do it in OS X as well if you install NTFS drivers. Paragon has a test driver that will do temporarily.
    (can't find the technote - searching Apple support kb has only gotten harder in the last couple years, and typing "Apple HFS Windows" in Google is something best I can do)

  • Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

    Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
    Message was edited by: john.rm

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • The Apple drivers that are downloaded for my HP printers do not allow me to modify the settings as I could when I was running a pc.

    The Apple drivers that are downloaded for my HP printers do not allow me to modify the settings as I could when I was running a pc.  Is there someway to get a printer driver that will permit full access to printer settings?

    Perhaps you don't have the correct driver selected.
    Try to Add it again, but instead of Auto-Select, choose Select Printer Software, then make sure you have the correct printer selected.
    If the driver you have says "Gutenprint" then that isn't the HP driver and might not have all the features.
    If you have the correct driver, the only thing you can do is contact HP and ask them to add the features.

Maybe you are looking for

  • Search Help with Structure Display

    Hi, I want to create a search help which should display my output in the structure format base on the different levels. I have already written a test program which display all the values in proper structure format. But I wanna do the same in the sear

  • Customer credit card refund

    Hi everyone, I issued a credit memo to a customer because they returned some items. The invoice was originally paid by credit card and they requested to refund their card. These are the steps I took: Sales A/R> Credit memo> Enter all information>clic

  • Executing system commands and capturing results

    How do I get the result of executing a system command using Runtime? For example, if I execute "cmd /c dir", how do I get to the result of the dir command from the Process that is returned?

  • N 97 mini invalid preshared WPA key

    Hi guys, I also suffer form this bug of invalid preshared WPA key.  The WLAN worked before, but stopped working one fine day.  Have tried most of the things in these forum which I could understand.  Also did a hard reset with thanks to U tube, but st

  • Why did the "x" to close a tab disappear?

    In the past there was an "x" on the active tab to allow the tab to be closed.