Audigy 2, DTS and AC3 passthrough in Windows 7

I have this problem, see in my windows xp partition my dts and ac3 passthrough works flawlessly, but in windows 7 i can't get any kind of recognizable signal from my soundcard to my reciever.
So my short question is, is this something that is an known issue with the drivers so far?
is there som quick fix, or am i just a bit slow
it's a pain to have to boot another OS just to watch a movie... still i know my soundcard is getting a bit old and if there's no easy solution i'm thinking of getting something newer to save me the trouble.
but i think it should not be such a big problem to just shovel along the signal without decoding it!
I have the plain Audigy 2 without any extras or letters at the end.

never mind, i'm a jackass...
i didn't think to check if there was a creative console with the drivers, i thought the windows 7 nati've control panel overided all that. set the creative control panel to passthrough and voila... it works

Similar Messages

Dts and ac3 - incompatible format

I have been given some pre-encoded dts and ac3 (5.1) files that were encoded on a windows audio encoding system. DVDSP gives me the "incompatible format" message and cannot import them. I suspect the data itself is fine, and there is problem with the file headers on the windows-created files.
Anyone know of a way I can force the files to be readable to DVDSP from my mac, or any tips I can give the person doing the encoding on making the files compatible with DVDSP?
the extension on the dts files is .dtshd
I am able to open the ac3's with VLC, but not with any apple programs.
Any help would be appreciated.

One of the reasons for non-importing AC-3 file could be wrong parameters. Have you specified your requirements for AC-3 files (bit-rate, metadata, etc). Can you see the file parameters in VLC?
DTS files used to come in two flavors, before HD-DVD and Blu-Ray were invented: padded dts file (.dts) and compact dts file (.cpt). The new HD formats pushed the envelope pretty high, and extension such as dtshd could signify exactly that: DTS-HD file which is not compatible with SD DVD specs.
DVD SP can import only compact dts files with .cpt extension, and it is very finicky about parameters.
For example earlier version of Minnetonka's DTS DVD encoder, copies of which can be found on the web, have a bug that prevents DVD SP from importing the files produced by it.
You should contact the audio house and ask them about procedures and parameters used to create the problematic files

Audigy 2 ZS and Surround Mixer in Windows 7

+?
Ok, I just installed Windows 7 Enterprise on a new HP XW 4600 workstation (NL, Dutch). This is a clean install. I have a Audigy 2 ZS (SB0350) and I dont have the surround mixer. Here is what I did:
?Install Windows 7 Enterprise and take all the pathes from Microsoft.
2.
?Intall the Audigy 2 ZS soundblaster? card in the computer
3.
?After the boot up I ingnore the message ?found new hardware?
4.
?I go to the Creative website and download the following programs
SBAX_PCDRV_LB_2_8_00 and WAVESTD_PCAPP_LB_7_2_00? which are recommended for my sound card.
5.
?I cant find the surround mixer, it is even not installed
6.
?I try the ?webupdate? there are some updates and I install them all
7.
?Again no Surround Mixer.
Can someone explain what I do or did wrong ?
I realy need the Surround Mixer !!

/Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Daniel K's Drivers
<a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
[color="#000000"]
[color="#000000"]Robert McClelland's Drivers
<a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

Atv2.3 and ac3 passthrough

Just upgraded to 2.3 and now my QT files with ac3 5.1 surround audio are not being pass-through, Anyone else having this issue? Regular 2ch audio comes through fine through optical cable but no ac3 passthrough.
I have a huge video library set for streaming with these file parameters, don't tell me Apple pulled the pass-through option out with this new release!

Thanks for the heads up on this. I learned my lesson after the last update to hold off on any updates until I see what others are experiencing. I too have a great deal of content ripped from my movie and tv dvd collection. Without the ability to play this content on the AppleTV, the device is useless for me.
Apple has to realize that iTunes is not the only source of video content. I love the quality and content on iTunes, but I am not willing to buy tv shows and movies that I already own on dvd. The more locked down they make the AppleTV, the more irrelevant it becomes.
I am a loyal Apple customer and am beginning to question why. It seems like over the last year and a half I am continually displeased by their hardware/software. Apple is still the best alternative, but its frustrating when being this disappointed after spending twice as much.
Looks like I will be waiting for 2.4 before I think about updating.

Audigy 2 ZS and Windows ME: switching to VXD drivers from WDM driv

Recently changed my sound card from an Audigy 2 to Audigy 2 ZS. OS is Windows ME. I used the VXD drivers with the old card and have been having lots of sound troubles that I have never experienced with a Creative card (distortion, sound sticking, etc.) using the WDM drivers and wanted to switch to the VXD drivers to see if this might correct problems. Have tried using CTZAPXX from original Audigy 2 ZS installation CD, but VXD drivers are grayed out.

I know it must be possible to switch to the VXD drivers, because on the Creative downloads page is a driver update with fixes "after switching to VXD drivers using Driver Utility."
One other note - When I do use the WDM drivers with this card, it is listed as "SBLi've!" under Audio Properties and it fails on Creative Diagnostics.


You have selected Audigy 2 ZS and Windows Millennium.To receive support for a different product, click here.
<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=7 border=0>
Drivers TitleDate <A target=_blank>[/url]<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=3 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=58 border=0>. EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS (3.57 MB) 9 Nov 03<IMG height=8 alt="Download Now" src="http://images.americas.creative.com//images/support/downloads/download-icon.gif" width=3 border=0>Download Now<IMG height=5 alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width= border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=522 border=0>
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.Hide Details
Filename: SBA2_EAX4DRV_0303.exe
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.
Added Feature:
EAX 4.0, containing DirectSound and Open AL API extensions, to utilize the EAX 4.0 ADVANCED HD Multiple Environment feature
</LI>
Fixes:
Removes noise from analog speakers after switching to VXD drivers using Driver Utility.</LI>
Allows compressed and uncompressed AC-3 signals when using VXD drivers.</LI>

Do you have an onboard audio processor? If so disable it in the BIOS and try to install the drivers from the CD first. Then head to Creative's web site and use the Auto Update option to dowload new drivers. If this does not work try installing the drivers from?a different driver if you have more than one. Some dri'ves that are defecti've or dying only install some disc contents before failing.?Hope this works for you!

Audigy 2 ZS and

I am getting a hum (grounding issues ?) when Audigy 2 ZS is in the PC.
The hum goes away (or is very faint)?when I disconnect my TV cable,?but theAudigy 2 ZS still has a tiny hum
PC line out is connected to my Panasonic receiver using a ground-loop-isolator cable, and TV cable to VCR, which is connected to receiver (A+V).
Any ideas how to rectify this ?
Where is problem ? Audigy 2 ZS or TV Cable ... or both ?

/Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Daniel K's Drivers
<a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
[color="#000000"]
[color="#000000"]Robert McClelland's Drivers
<a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

Audigy 5 Rx and windows 7 64

I have just purchased the Audigy 5 Rx and windows 7 64 will not install this sound card , I can find in the device manager the Multimedia Audio controller card but when I try to install the drivers windows returns an error in installing them is there a trick or something I am missing , I have tried since Dec 30 with no luck even took the card out and put it back in , I am using a PCIe slot

Look on your CD for a "drivers" folder and then the WDM. You can browse to this in device manager and manually install your drivers by finding your AUDIGY 5, double clicking, then choose update driver, and then browse my computer for driver software. After installing, reboot. Retest the card. I have done this several times over the years when "setup.exe" on the CD wont work.

[Audigy 2 Zs] Dsp effects on microphone and mp3 recording on Windows 7?

Hello.
I have a SB Audigy 2 zs platinum.
Is there a way to enable dsp effects on microphone and mp3 recording under Windows 7?
I'm a musician, and I bought this soundcard for the possibility of a simple and fast recording with eax + media source.
When beta and RC of windows 7 were out it was impossible, I've just installed Windows 7 Ultimate Edition and I don't want destroy my sistem installing and installing drivers.
I've read this forum and I found some solutions: kx drivers, unofficial driver cd, and another driver.
So I'm very confused. I'm not interested about 5.. Only dsp effects on microphone and direct mp3 recording.
Is it possible or my audigy is ready for trash can?

No solution?

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Audigy 2 ZS and windows 7 only mapping a 2.1 speaker playback

=Audigy 2 ZS and windows 7 only mapping a 2. speaker playback? I have an Audigy 2 ZS and windows 7-64,?it seems to be?only? mapping a 2. speaker setup for audio playback?with regards to WMP, Mediasource player and other similar sources.
Under Xp and vista would have just selected surroundsound under the creative audio console, but now that option is unavailable and probably not supported under Win7.
I have a 5. set of speakers, 5. mapping?is working for sources that do support it such as games and DVDs.
My question is"is this a known problem with my card and win7 or a problem with my system setup/configuration"
For the time being, i'm having to boot into Vista whenever?I fancy listening to some music which is of course quite inconvenient.
Please someone let me know if there is a fix for this, creative mod or user, anyone.
Much appreciated,
Screwy.

It is no 7. support, only 5.
You can try to install this:
http://nomoregoatsoup.wordpress.com/2007/09/2/unofficial-audigy-series-software-cd-for-win2000-xp-server-2003-vista-3264-bit/
but before you do completely uninstall all Creative drivers and software from system. I recommend this method;
http://nomoregoatsoup.wordpress.com/2007/09/2/how-to-fully-uninstall-creative-vista-drivers-solve-install-problems/

DTS support with audigy 2 zs and inspire t5900

Can i have dts and dd audio with inspire 5.1 5200 or t5900 and audigy 2 zs ?
At link (http://www.creaf.com/speakers/source...rt-Speaker.pdf) inspire 5.1 5200 has no dts support with audigy 2 zs ...

sussie,
Yes. The Audigy 2 ZS sound card support DTS and Dolby Digital 5.1 decoding so it will work with the speaker.
Jason

SB Audigy 2 ZS and Windows 7 - Full Package driver?

4SB Audigy 2 ZS and Windows 7 - Full Package driver? [color="#000000"]Ok. I read some topic's where is explanation and download driver for SB Audigy 2 from Daniel K.
My question is about applications. Why offical drivers don't have applications?
"Audio Effects are high quality music enhancement efects created by the powerful audio engine in your sound device."
I need Audio Effects! Especially Advanced EQ and Graphic Equalizer.
The Sound is much better with this effects.
Please, do something because I love this sound card!

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Media Foundation Source or H264 / AC3 differences between Windows and Phone 8?

I've got a working Matroska (MKV) Media Foundation Source for a Windows Store app (PC x86). It will play several different matroska files that contain H264 encoded video and AC3-encoded audio. It even has seek support. I've written the app
as a HTML/typescript Universal app with the MF Source as a C++ dll.
The problem is that the same code will not work on Windows Phone 8. I can play videos that don't require the external MF Source (i.e. MP4 files and AVI files) just fine on both platforms through my app, but the same MKV videos that played on an x86
PC will not play on Windows Phone 8 (Lumia 920).
I looked at the specs for the Snapdragon processor and it should be able to support both H264 at 720p resolution and AC3 (2-channel only). So I don't know what else I need to do to get this to work on WP8. The audio I'm trying to play is actually
6-channel, so that made me wonder if it was failing because WP8 supports 2-channel max, but I would have thought the audio just wouldn't work and the video would play normally.
Does anyone have any suggestions?
*edit* - just to be more specific, I can parse the file and create the presentation descriptor without errors. But when I finish opening the file and call the event for that, nothing else happens. What is weird is that the javascript video player
never throws the "canplay" event, nor does it throw the "error" event.
Lee McPherson

Thanks, not a bad suggestion to try.
On my Windows machine, I tried to get the MediaEncodingProfile via the createFromFileAsyc method. With a known file type, it outputs all properties of the video and audio streams (bitrate, etc). With an MKV file (container file with H264 video
and AC3 audio), I only get the type and subtype properties. Everything else is zero or null. This is because in my MFSource, I only set the type and subtype. This still allows the video to play on my windows machine. I assume the
built-in MFTransform for H264 video-to-uncompressed video parses the stream to get the relevant information. Likewise for audio.
On Windows Phone, when querying the file's MediaEncodingProfile, I get the same result. This is telling me that my MFSource will parse the file properly and set the subtypes for video and audio correctly. Everything else is still null or zero.
However, the file does not play. There is no returned event to the video element that it even *can* play.
Perhaps, I need to fill in the video and audio stream properties on the Windows Phone version. I really don't want to because that would mean having to parse some of the underlying video and audio streams themselves, not just parsing the container
information. (More work!) But this is what I mean when I ask about the differences between Windows and Windows Phone... perhaps the WP8.1 & Windows MFTransforms are different?
*EDIT* - I do get a JavaScript Console error that I didn't notice before: AUDIO/VIDEO: unknown MIME type. (VS error code: MEDIA12899)
Lee McPherson

Different start for DTS and Dolby AC3

I can play my movie either in DTS Dolby Digital 5.1 by setting the audio track using a Audio set up sub-menu. What I would like to do is on choosing DTS in the sub menu to see a short DTS intro rather than a Dolby intro when I play the movie. Does anybody have any ideas how I can tell Encore that when I choose "play movie"
If audio track 1 then say playlist 1 or
If audio track 2 then playlist 2
Many thanks

Not to be a pedant, but please ask Dolby Labs before using their films!!
You'll need to sign a TDA with them, and agree to submit examples of your final disc for quality control by Dolby.
This is a free service, as long as your Dolby Digital 5.1 encoder is a properly licensed one, like the SurCode one in Premiere Pro.
Ditto DTS.
You'll need to sign the agreements, and they will check the suitability of your encoder before sending you the files.
The idea behind this is that those trailers are a guarantee to the end user of a certain technical quality - and Dolby Labs do prosecute people using them illegally.
One of the benefits is that both DTS and Dolby Labs will send you pristine copies of the trailers, as well as EPS logo files as well (You also cannot use the Dolby or DTS logos without permission either)

Audigy 2, DTS and AC3 passthrough in Windows 7

Similar Messages

Maybe you are looking for