Audigy 2 - No Sound after reinstall with latest drivers

I have reinstalled my harddri've and as part of that had to reinstall my soundcard (Audigy2). This is an old Dell system for the kids to play around with. However I can't get it to work. Initially the Audio console kept defaulting to Headphones. I have clicked off the sync with Windows and now both are on 5., but still no sound.
No conflicts or anything, speakers are connected (and always worked well before this), not set to digital output,
Any idea anybody?

PieterVL,
Is this a Dell OEM card? Do you have an installation CD for it's If so, did you cancel out of installing the Windows driver and install the driver from the CD?

Similar Messages

No sound after installing the latest drivers

After installing the latest drivers for X-fi xtrememusic, 2.8.003 I have no sound. Also my creative console is stuck in Entertainment Mode, it won't switch to any other mode. Help please?

Pheary wrote:
?My best guess is this is some bizarre driver/registry problem, since it mostly works perfect in XP, but barely at all in Vista.
Well, i don't have a solution for you, but if your soundcard + hub act like that even under xp after a few weeks i would suggest to get a replacement, cause there might be a hardware-error that causes your problem. A software/driver problem sounds very unlikely to me. That your having problems under Vista, isn't strange at all, cause there are still no final drivers relaesed for Vista and the support of the hub is rather barebone at the moment. Stormblade

HP Mini 110 (XP) - No sound after reinstall

Hi there! I have a problem after reinstalling my HP Mini 110, and would appreciatte any feedback on this.
I formatted the pc and installed a fresh version of XP Home edition (SP2).
Everything went very smooth and all drivers where installed (Downloaded from the HP driver support site).
Video, network, Intel chipset, Wifi, Bios, everything is working like a charm... expect for the AUDIO.
I've installed the IDT driver, but when the installation starts it says something in the lines of "your sound device is not supported by this installer" and shuts down.
I've tried with several different drivers (all from HP site) with no luck.
Another thing that caught my attention is that there are no sound devices in the "hardware management" tab of the system.... No sound card is detected! This seems really weird to me...
What could be the problem ? Any clues ? I should point that before the format the sound card worked perfectly.
My machine is an HP Mini 110 (1020 LA).
Thanks a million for any feedback!
Ale_Argentina.
This question was solved.
View Solution.

Paul,
Thanks again for your feedback.
The interesting thing is that there is no device showing on de hardware management tab... Under sound there are no "unrecognize" devices or anything.... This look weird to me!
I'm assuming i have and IDT sound device as all netbooks from this series have it, and i had the IDT software installed before formatting the pc.
It's also importanto to mention that the sound device was working until Sunday before i made the new installation of WXP.
The strange thing for me is that nothing is showing up in the hardware manager.... There should be at least an unknown device showing me a lack of drivers right ??
I will aprecciate any ideas of thins i might have to look into to solve it...
Thanks again!
Best regards.
Ale_Argentina.

After flashing with latest FW (112.101.1404, p/c:0...

Hello,
due to crash after FP1, the phone died. At service they reinstalled the latest FW package and the Microsoft App disappeared. Even after Nokia Suite reinstalling of the FW nothing has changed. Does anyone have such an experience, have you found out how to fix it?

@RossN
Don't know what happens if you try installing microsoft_apps_-_Nokia_Store_454904.sis which although now removed from Nokia Store remains in circulation.
Happy to have helped forum with a Support Ratio = 42.5

GPU Acceleration disabled even with latest drivers

I´m trying to enable GPU acceleration, but even with the latest drivers it wont enable.
Note that this is with AMDs Legacy driver for Windows 8 x64. The card is a 4870x2.
Firefox wants a higher driver number then 12.8 but in CCC it states that my driver version is 13.1.

hello, there seems to be a different technical driver naming scheme by amd for radeon HD 2/3/4000 series graphic cards (their latest driver version is 13.1 which translates to the technical version 8.97.100.7) & hd 5/6/700 cards (13.4, which translates to 12.104.0.0).
due to crashes triggered by older driver versions firefox is blocking all cards below version 9.10.8.0 for HWA - i don't think it is possible to differentiate these blocks for certain card models (since there are too many of them)...
you could try to circumvent the blocklisting like it is described at https://wiki.mozilla.org/Blocklisting/Blocked_Graphics_Drivers#How_to_force-enable_blocked_graphics_features though.

Firefox will not open on my computer, even after reinstall, with no error message or when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe" -p. Help?

I recently installed firefox so I could use an adblocker. It installed just fine, and it worked just fine for about three days. Then yesterday it stopped opening. I'm on a Toshiba running Windows 7. The icon highlights when I click on it, but then it stops and won't open the browser at all. When I try to run it with the manual command "C:\Program Files\Mozilla Firefox\firefox.exe" -p, I get the error message, "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." I installed it to that location, and I don't need a disk. I'm connected to the Internet just fine and my other browsers (Chrome and IE) work the same as always. But they're swamped with ads and I really was happy wih Firefox when it was opening...how can I fix this issue?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

[SOLVED] no sound after reinstall

**EDIT**
POST IS IRRELEVANT
My hp nc6220 laptop has an ICH6 soundchip and ac97 codec
Installing alsa-utils and running alsaconf was one of the first things I did after a reboot into the new system.
aplay /usr/share/sounds/alsa/Front_Center.wav worked. I set levels with alsamixer and did alsactl store.
Then I proceeded installing xfce4, mplayer, audacious and a whole lot of packages. When I wanted to listen to music, there was no sound. Not outside of X either. I don't remember if I rebooted inbetween. The three mediabuttons mute, lowervolume and raisevolume register, but do nothing. I see the osd come up when i press them playing video in mplayer, though.
buttons:
.Xmodmap
keycode 160 = XF86AudioMute
keycode 174 = XF86AudioLowerVolume
keycode 176 = XF86AudioRaiseVolume
Is this kernel too new? I have the 2.6.29-ARCH kernel. The modules snd_intel8x0, snd_intel8x0m and snd_ac97_codec are loaded. I'd like to go with alsa, I think it's more usable than oss. I have the same problem with debian sid and made a lengthy post about it. I finaly chose oss over alsa there.
for reference:
http://forums.debian.net/viewtopic.php?t=38112
**EDIT**
Nevermind. Sound works as expected. I think I accidentally set something wrong in a mixer.
Last edited by kanonmat (2009-05-03 09:01:19)

**EDIT**
POST IS IRRELEVANT
My hp nc6220 laptop has an ICH6 soundchip and ac97 codec
Installing alsa-utils and running alsaconf was one of the first things I did after a reboot into the new system.
aplay /usr/share/sounds/alsa/Front_Center.wav worked. I set levels with alsamixer and did alsactl store.
Then I proceeded installing xfce4, mplayer, audacious and a whole lot of packages. When I wanted to listen to music, there was no sound. Not outside of X either. I don't remember if I rebooted inbetween. The three mediabuttons mute, lowervolume and raisevolume register, but do nothing. I see the osd come up when i press them playing video in mplayer, though.
buttons:
.Xmodmap
keycode 160 = XF86AudioMute
keycode 174 = XF86AudioLowerVolume
keycode 176 = XF86AudioRaiseVolume
Is this kernel too new? I have the 2.6.29-ARCH kernel. The modules snd_intel8x0, snd_intel8x0m and snd_ac97_codec are loaded. I'd like to go with alsa, I think it's more usable than oss. I have the same problem with debian sid and made a lengthy post about it. I finaly chose oss over alsa there.
for reference:
http://forums.debian.net/viewtopic.php?t=38112
**EDIT**
Nevermind. Sound works as expected. I think I accidentally set something wrong in a mixer.
Last edited by kanonmat (2009-05-03 09:01:19)

Problems with latest drivers for Audigy 2

Here is my problem: I have tried several times to install the newest drivers. However my sound card doesn't install correctly. I dl'ed the drivers and the dvd-audio .exe thinking the dvd-audio is what I needed. It wasn't. The dvd-audio program gives me a error message saying no device is found. Going into the control panel --> sounds and audio settings, shows I have no device installed. Likewise in the device manager the little yellow "!" is there, and windows says multimedia audio controller, nothing more. However, if you try to install drivers, you will get a message saying drivers for the device are there, and will be uninstalled to continue installation. Um, what gives? Am I doing something wrong? The original drivers work and so do the beta AL drivers but the latest I can't get to work.... :smileyindifferent:

The card should have come with a CD. Did you contact your supplier or the store where you got the card, to see if they have the CD for you?
Cat

Z87 MPOWER reboots automatically after shutdown with latest BIOS

Hi!
I was having some problems with the RAM using XMP profile (CORSAIR CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9). Mainly I had some occasional reboots at windows startup and some rare random blue-screens but it all went away after updating the BIOS to version 1.7 .
But now I'm having another issue. After shutting down the PC it turns itself on after 1 second. It only started to happen after the 1.7 update. Any ideas of what it might be?
Thanks in advance!
My PC specs:
CPU: intel core i7 4770k
COOLER: Corsair H60
MOBO: MSI Z87 MPOWER
RAM: Corsair CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9
PSU: Corsair HX850
PSU: PNY GTX780 OC Enthusiast edition
SSD: Samsung 820 EVO 500GB
HDD: Seagate 7200rpm 3TB
SO: Windows 8.1 Pro x86-64

See that latest beta bios: https://forum-en.msi.com/index.php?topic=169826.msg1279904#msg1279904
Flash using the method and files to which I linked.

OneKey Recovery broke after reinstall with retail DVD

So I know this has been an issue (After reading tons of posts after the fact...) but couldnt find a straight clear resolution for my situation or I missed it somehow.
Anyway got a G530/3000 4446-23U.
Came with Vista Home Basic and the OKR button thing.
I booted off a DVD of vista and saw it had 3 partitions. 0, 1, 2.
I saw 0 & 2 was some factory type stuff and 1 was windows. So I erased 1 and created new one and had vista ultimate install.
Well of course this broke OKR button.
I didnt know this would happen, I figured it was like the dells and what not, so long as I didnt erase the other partitions I was safe... HA teach me...
Anyway I have tried to get this to boot back up to OKR and no joy. It boots to vista if I press the key. I have read that I guess the MBR got messed up and it also modified some files on that drive?
Anyway I tried setting 0 (the OKR partition) to 12 as it was 7 for the partition type and also set it to boot but no joy. Same results. 12 just seems to hide it from windows.
Anyway I found on that other partition it has two WIM files. One is drive c and one is drive s (OKR drive).
I mounted those and tried to copy of the bootmgr and other boot files from the image because the vista install modified it and still no joy.
So it seems they provide us with the original files but no simple way to restore them. The next thing is why even with original files wont it boot right? is something other than boot, and type 12 wrong with the partition?
Also one other wrench to toss in this mess is I have flashed the bios. it came with 1.05 I think, I put 1.15 on from lenovo site as it said it fixed a problem with sleep, so i figured flash it to save myself trouble later. Well that bios had a bug or was not for our exact laptop even though it said 530... I have now found some 1.07 bios that seems to not have the bug, but I guess its also possible it changed something too? It is for a MT 4446. but again it seems to run best.
Anyway any help on the OKR would be great.
I have not erased or toucheed the two factory partitions, just windows one was erased and re-made. Their is also those two image files I can take files out of if I need to restore anything, just cant seem to get her to boot to it.

okr doesn't work due to you made changes on volumes.
you need to order recovery discs from lenovo or ship it to back to reset the hdd its default. then okr will work.

My Razr HD will no longer play notification sounds after updating with 4.4.2, it also doesn't use the ringtone that I have selected.

I've tried setting different ringtones, and notification sounds, but it still doesn't work. Any other ideas?

Thanks for confirming CasMcc. Are you stating the notifications are working now? What specific notifications are you having difficulties with? You said calls, messages and media are now working. If something changed it would have to be on the device itself. This issue would not be account related.
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

ISync wont open even after reinstalling with Pacifist

I hate to revive a topic that Mr Lafferty (god bless) must have thought dead and gone, and replaced by all the Leopard iSync complaints threads, but...
I have a refusenik iSync in 10.4. I have done all of the reinstallation using Pacifist and OSX combo updates as recommended on other threads, but I still don't have a revived iSync. When launched, the logo still bounces away for a while, then sits in the Dock with no little triangle beneath - just like before I reinstalled. Still no response when I click on it except that the word iSync appears in the top corner and everything freezes until I click on Finder or some other icon.
I have used the 10.4.11 combo update. I have done it twice, and I have tried both Update and Replace when those options appear in the combo update.
Aargh. Is there another more fundamental way of getting rid of this annoying defective iSync and installing a completely new version?
As some may realise, I'm reposting - apologies. But I never get a reply to my posts- help!!!
Gareth

Where to start? Try this…
Look for an iSync crash log—iSync.crash.log—here:
Macintosh HD:Users:<username>:Library:Logs:CrashReporter
Use Technical Note TN 2123: CrashReporter to get some idea of why your copy of iSync crashes.

Does not load pictures after updating with latest version

I have windows 7 and just updated the latest version of firefox. Since I did this, none of the pictures load in my email.

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"

No Sound after Bootcamp 3.0 drivers

Just installed Bootcamp 3.0 drivers from the Snow Leopard disk, and now have no sound.
During the install process there were lots of references to Sigmatel, which is what I think the driver used to be, but in Deice Manager the sound driver is now IDT which also has a menu bar icon bottom right.
Any ideas?
Thanks

I have "solved" this by installing just the Bootcamp 2.1 sound driver from here:
http://files.geoffgarside.co.uk/bootcamp/Drivers/IDT%20SigmaTel/
The original problem is that with 3.0 there was no sound from the internal speakers on my MBP...only from the headphone jack where the optical output red light also showed. I could not find anyway of making it play through the speakers.
Would still be grateful for any proper resolution of how to make the BC 3 sound driver work.
Thanks

Cannot print-to-fax on HP Photosmart C7280 with latest drivers

This machine used to have Tiger then got leopard installed. I installed the new HP drivers yesterday and reset the print system, then added the printer which prints just fine. Haven't tried scanning yet. My problem right now however, is Faxing. I have never been able to fax from any computer on two models of HP printers.
I added the Fax printer by going to System Preferences->Print and Fax->More Printers, then selecting HP AiO Fax. It started showing as a (Fax) printer. I then went to the print options during a print and was able to add my recipient with the phone number. But after clicking "Send Fax", it got stuck in the print queue. Restarting it only flashes "Printing" for a bit then stops.
All I want is to send a couple of faxes with the Fax printer I bought.. You'd think single recipient print-to-fax would be a typical QA use case.
Anyway, I enabled debug logging on the cups daemon to reveal the following on /var/log/cups/error_log. I suspect that "unrecognized selector sent to instance" message. By the way, PrintJobMgr leaks like a sieve.
D [14/Apr/2008:21:37:55 -0700] cupsdProcessIPPRequest: 17 status_code=0 (successful-ok)
D [14/Apr/2008:21:37:55 -0700] [Job 1] sendJobProgressEvent: currentPage: 1 currentCopy: 1 currentSheet 1 percent: 100 isEndOfSheet:yes
D [14/Apr/2008:21:37:55 -0700] Discarding unused job-progress event...
D [14/Apr/2008:21:37:55 -0700] Discarding unused printer-state-changed event...
D [14/Apr/2008:21:37:55 -0700] cupsdReadClient: 14 POST / HTTP/1.1
D [14/Apr/2008:21:37:55 -0700] cupsdAuthorize: Authorized as david using AuthRef
D [14/Apr/2008:21:37:55 -0700] Get-Printer-Attributes ipp://localhost/printers/PhotosmartC7200_series__024822
D [14/Apr/2008:21:37:55 -0700] cupsdProcessIPPRequest: 14 status_code=0 (successful-ok)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.909 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x159110 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x930c92f1 0x930c935d 0x930c93b1 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.913 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x134b20 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x942dd02a 0x930c937d 0x930c93b1 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.914 PrintJobMgr[22234:10b] * -[NSCFString count]: unrecognized selector sent to instance 0x121ac0
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.915 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x12cd90 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x930c92f1 0x930c935d 0x930c93f1 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.916 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x12c580 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x942dd02a 0x930c937d 0x930c93f1 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.917 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x1348a0 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x942dd02a 0x930c9412 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.917 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x126c20 of class NSException autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x930c9442 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.918 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x162cb0 of class _NSCallStackArray autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x9432ba58 0x930c224b 0x92cfb0fb 0x930c944a 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.919 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x12cb50 of class NSCFString autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x942dd02a 0x930c21ce 0x92cfb0fb 0x930c944a 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.919 PrintJobMgr[22234:10b] * _NSAutoreleaseNoPool(): Object 0x12be30 of class NSCFData autoreleased with no pool in place - just leaking
D [14/Apr/2008:21:37:55 -0700] [Job 1] Stack: (0x943c512f 0x942d1ec2 0x942e62a5 0x942e5e81 0x930c21e2 0x92cfb0fb 0x930c944a 0x930c7a4c 0x930c7b12 0x92fd7491 0x30bb2d 0x30203b 0x2fe7 0x2e034 0x59f4 0x6066 0x7698 0x3979 0x2552)
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.920 PrintJobMgr[22234:10b] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFString count]: unrecognized selector sent to instance 0x121ac0'
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2008-04-14 21:37:55.921 PrintJobMgr[22234:10b] Stack: (
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2467045963,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2463084795,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2467075146,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2467068492,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2467068690,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 2466083985,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 3193645,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 3153979,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 12263,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 188468,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 23028,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 24678,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 30360,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 14713,
D [14/Apr/2008:21:37:55 -0700] [Job 1] 9554
D [14/Apr/2008:21:37:55 -0700] [Job 1] )
"HP Send Fax" from the device manager doesn't work either.

Hi
Can you try this.
Download this HP SW driver from HP.com
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&sw_lang=&product=4083...
This is a mountain lion installer, currently there's no support for Mavericks. Just downlaod this.
After you ahve downloaded, install the sw.
When you reach the page below, try to check everything.
Whne you reach this page,select the "Bonjour Multifunction" and in Use: select the the HP Officejet ******. Dont select AirPrint. You should see the HP Fax during this page. If dontsee the Fax, just wait for a while maybe 2mins. Update me if you dont. And continue the installation.
After the installation, click "System Preferences" in the dock. Select Printers & Scanners, on this page you should see the Printers and Faxes of your printer.
Please try it out and update me the outcome.

Audigy 2 - No Sound after reinstall with latest drivers

Similar Messages

Maybe you are looking for