Audigy 2 NX all lights flashing, not function

Hello,
For the past few days the audigy2nx has been playing up, ie randomly disconnecting from the PC and so on. Usually solved with nothing more than a restart. Tried to turn it on today though and nothing happened. None of the lights came on at all. Then all the lights started blinking about every 2 seconds. Pulling the power and reconnecting makes no difference.
Whats going on? Has this spat the dummy permanently?
Cheers,
Ben

I had the same problem come up a week ago. My audigy nx has run perfectly then suddenly this. But I followed the advice here, bought a new adaptor. It made the card work again, but I had to reinstall the MediaSource software, and now I can't get proper sound. Although MediaSource is loaded, there's no bar on my desktop and if I try to open it from Programs menu or My Computer nothing happens. It's all installed, but for some reason my pc no longer seems to acknowlege it.
I've uninstalled and reinstalled several times, gone back to a former date on System Restore, but I just can't get it to function. Really frustrating, as the card appears to be functional, and until now its worked perfectly for 2 and a half years.
Can anyone help with this?

Similar Messages

Linksys e1000 router blinking all lights steadily not functioning

Somehow in the process of researcing how to add my new laptop to the router, the router quit working and is now just blinking the blue panel lights.
I was attempting to download Cisco Connect to my flash drive and instead it began to execute and I aborted that in about 10 seconds.
Wondering if just that messed up the original setup which was working fine..
Thanks,
jim

Well go ahead and try resetting the router by pressing and holding the reset button in back for 30 seconds.

HP Officejet 6310xi won't print - keeps blinking "reset power" and all lights flashing.

I have an HP Officejet 6310xi that won't print. When you select print, the paper begins to feed then suddenly stops before any printing begins and all lights on the face of the printer begin blinking and the message "RESET POWER" blinks in the screen readout of the printer. When I turn printer off and back on, the screen indicates a used color cartridge is inserted and I hit OK, then indicates used black cartridge is inserted, then I hit OK, then it says it needs to align cartridges, I hit OK. After trying to align cartridges, it suddenly stops and goes back to all lights flashing and screen flashing "RESET POWER". I can hit cancel during cartridge alignment and printer goes to normal ready position. I can then print a test page. But as soon as I try to print anything else, even the diagnostics page, it goes back to flashing all lights and "RESET POWER". I did a semi reset (unplug, wait, plug in holding #6) and a full reset (with #9). That did nothing except wipe out the date on the screen read out of the printer. So I know the full reset executed correctly but it did not solve my problem. Please HELP! I am reposting with email me selected - I'm new at this posting to forums...

johnhp75 wrote:
how do I reload the software in the printer?
See link below for the software and driver downloads
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1120043&
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Xserve will not boot up, all lights flash rapidly

Just bought a lightly used Intel Xserve. This unit was in a business that failed, and was set up, but never used. Was powered off and unplugged for approximately 18 months. When we tried to plug it up to check it out & configure it, we noticed the following:
System will not post and won't boot
Hard drives do not appear to spin
CD Drive appears to have no power - will not grab disk
All fans do work, and run on high RPM
All lights on back of server and front of server, as well as next to SDRAM slots, and on back of main board flash / flicker (regular quick flashes, no pattern evident). The only light that does NOT come on at all is the light next to the power button.
Anyone heard of a similar condition? Is this server toast?
Thanks,
Rob Hogan

I'm sorry to say I don't have a solution, but I can commiserate.
I have a G5 and two G4's, and so far within a few days / couple of weeks of getting them home and getting them up and running, they seem to fail.
Usually spectacularily.
The G5 operates very much as yours in that power on, fans rev high, and no post or other activity; I don't get any system light status action however other than flashing. I've replaced CPU's and logic board on this.
The single CPU G4's does much the same, but this I've had up and running and then it went down when I upgraded the memory to max (very careful to make sure it was within Apple spec's), and despite swappinbg the original memory back in,nothing.
My latest, a dual core G4, was bought in working order, and I upgraded this from 10.4 to 10.5. Running nicely as a internet gateway. Went away for weekend so put it into sleep mode. Came back, power button on front panel stopped working, and one of the raid slices on the system drive failed.
Tried to repair this and system now no longer boots, but freezes on loading OS (spinning disc stops in mid spin) and it will not boot from installation disc via firewire or internal DVD drive (swapped in a replacement to ensure it works). The installation disc stops at the apple splash screen, but goes no further.
I can, helpfully, get into Open Firmware mode, so something is working on some level. Sadly, I can't seem to find a copy of the Apple Hardware Test for this machine (see my post on this) to check it out.
I can tell you that I'm getting very adept at working with Xserve hardware, if not very effectively.
My working hypothesis on this is that there is some issue with these units being used 27/7x365 for however long, and then being left 'off' for a prolonged period.
Thinking that whilst they are designed to operate reliably as constantly on and working under load, so facet of being 'off' breaks 'something'.
If really pushed to go out on a limb, I'd theorise that under load the electronics/IC's settle into position, but then when switched off things cool down, contract, and causes weaknesses in electrical connections to occur. When next used, these then start to fail, giving a pattern of initial operability followed by delayed failure with a cascade of increasingly servere symptoms until terminal failure is reached.
But that is wild, uneducated, conjecture.
So, no help, but I comiserate.
XD Andy
btw, is anyone has some useful advice for me on where to find the AHT 2.0.1 for Xserve or even just the part number ... ... ...

F4280 - All Lights on - Not Printing & I'm stumped

I have an F4280 all in one printer and it is not doing a thing. The Mrs was doing some thing the other day and since then it has not worked. There was the same item in the print queue where she has repeatedly hit print.
All the lights are on, no blinking, and the No. Copies is showing 8.
Unit has been disconnected from the pc and mains for over 24hrs but still no joy.
Any help greatly appreciated.
Cheers

If the power cable is connected to a surge protector/power strip, then connect it to a wall socket. If it's already in a wall socket, then connect it to a different wall outlet and see if the issue occurs. If all lights still turn on, then unplug the power cable from the back of the printer, then press and hold the Cancel+Paper Type buttons, and then plug the cable in. If this doesn't resolve the issue also, then call HP to get the printer serviced.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

FireFox 23 & Flash Not Functioning

Recently, FireFox started telling me that I needed to install the flash plugin - not sure why, as I had it installed earlier on...
I try to use FF to install but am told I need to it manually... so I do and it appears to install properly, as I see the completed page load properly...
But then when accessing a flash page, I get the notice again that I need to install...
Please advise...

Just tried that, unfortunately, while it appears to work as the installer completes successfully and Firefox opens to a page that says it's installed properly - the flash animation doesn't play (it is visible but that's all) as it does when IE opens...
And when I check my flash version, all I see is a grey box... also, it doesn't appear in my add-ons... I think that I mistook Shockwave Director for Flash...
Any more ideas?
Thanks!

Captivate 7 question - slide with audio and light boxes not functioning properly

I am currently working a project and cannot figure something out.
I have a slide with 9 smartshape buttons on it. When each button is clicked it brings up a lightbox. Each lightbox has it's own close button. When the lightbox is closed by the user then the user immediately sees the 9 button screen and can choose another button to view and read, and so forth. I have the lightboxes working fine.
Now, I added text to speech. It is a mere 15 seconds in length, but it contains some important content and the directions. I want the text to speech audio to stop playing if the user goes ahead and clicks on one of the 9 buttons which then brings up a lightbox. I want the audio to then resume when they close the lightbox. OK I have all of that working in a technical sense.
I've also tried this advanced action, but this stops the Audio entirely, however it does solve the autoadvance issue. so I am just trading issues.
I also have "back and next" nav buttons on the slide, so the user must click one or the other to proceed off the slide. Ok those worked.
Here is the issue. Once I added the text to speech audio, at the end of 17.3 seconds, whatever lightbox the user may be viewing and they hit the close lightbox button, captivate automatically sends the user to the next slide. No clicking "Next" or anything. I can't figure out why this is occurring.
Prior to adding audio the slide worked as it should with the user being able to click each of the 9 buttons to "read some info" then close it and click another button on the slide, etc. They could do this in any order they wanted.
When I added the audio, I set the advanced actions so if a user clicked on one of the buttons, the audio would stop playing until they came back to the main screen. Ok no problem getting that to function - except it stops functioning at the end of 17.3 seconds.
What am I missing?
Thanks for any help!!!
Michelle

Correct I have only 15 seconds of audio with the slide. no audio with any of the light boxes. Those are "read only" light boxes.
If the user clicks a shape button early, before the entire audio has played, I want the audio to stop, so the user can read the lightbox info, then as they click back to the slide away from the lightbox, I want the audio to resume playing - so they can hear the rest of the audio. But, this is where is doesn't function properly as when the audio finishes playing at 15 seconds. The next shape button the user clicks on to shows the lightbox, but when they click to close the lightbox, the lightbox closes then sends the user to the next slide. They haven't had a chance to view any of the other shape buttons and the information found in those corresponding light boxes.
I hope this clarifies.
Any thoughts?
Michelle

Hp 6500 wireless. all buttons flashing not working

i have a hp 6500 wireless, and it is not working .
all buttons are flashing and the screen reads, "to avoid damage turn off and then turn back on"
i tried that but idid not work

Turn the printer off. Hold # and 6 keys on the printer while and for a few seconds after turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

D110 printer: all lights flash after new ink installed

Need to know how to reboot printer! Have lots of work to do! Thanks!

Hi Joy47,
I see you would like to know how to reboot your D110 printer because all of the lights are flashing since changing the cartridges.
You can try leaving the printer on and unplugging the power cable for 1 full minute. This is called a hard reset.
If the issue persist, please open the following link and select the issue that best describes the symptoms you are experiencing. Errors & lights on the product.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Consolidate All Windows option not functional in Illustrator CC 2014

I just downloaded the Illustrator CC 2014 update, and I cannot for the life of me consolidate all my open documents to one window. In other words I want to dock all open documents to the top in tabs. In the regular CC version, if you have multiple documents in tabs in a floating window, you can go to Window > Arrange > Consolidate All windows, and it will dock all of those docs at the top in tabs. However in CC 2014 that option is greyed out and I can't select it. Anyone else experiencing this bug? Am I doing something wrong? (The first image is CC 2014, and the second is from regular CC, what I want it to look like.)

SUCCESS!! I figured out that you need the Application Frame option checked in order to achieve the layout I like. Silly me.

Sleep Indicator Light (SIL) not functioning

Hello,
I own a Macbook Pro 13" (Mid 2012 model).
The unit was purchased in March 2013.
However, I notice that the indicator of sleep (SIL) no longer works, and that already a long time.
Not when starting up the macbook, not when the macbook is brought into sleep mode.
This is the case both with OS X 10.8 (Mountain Lion), 10.9 (Mavericks) and 10.10 (Yosemite).
For problems with SIL Apple recommends to do an SMC reset.
I've done this, without success.
Other suggestions / tests that can help me to solve the problem?
Kind regards.

Have you tried to reset the Power Management Unit (PMU)?
http://support.apple.com/kb/HT1431?viewlocale=en_US

MY PAGE IS ALL RED , flash not working w/ chrome

when i go on a page it shows all red, no pictures work, but when i go to the adobe site it says i have the latest version installed... please help m! thanks

This forum software is very tricky; updates to forum posts sometimes need to be done three or four times until it "takes". I have been able to update your original post.
Now that it is actually readable, I will go and have a look at it.

All buttons are not functioning!

The only thing that functions on my Curve is the trackball. I've taken the battery out and put back in, but that didn't do anything. Any suggestions????

Remove the battery and place the device in a warm place for a few days, such as on top of a warm piece of stereo or electronic equipment or place the device in a bag of uncooked rice. Give it a few days to dry out and then try it again.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Officejet 5750 running on Wndows 7 PC starts to print then stops and all lights start to flash.

Printer had been working fine. Just started stopping a print after a few lines and all lights flash.Have to turn off and back on to clear. Doesn't do it every time. but does it on all programs and web printing.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PhotoSmart C7280 All-in-One Not Responding

Printer = PhotoSmart C7280
Situation #1
Printer screen displays message "Ink System Failure" with error code 0xc19a0035
Situation #2
All lights flash - printer screen is blue with symbol (power) and message b03771de in white.
Is this printer beyond saving?
The printer may have suffered from a sudden power outage prior to these problems appearing.
PC - operating system is not relevant.

The same thing happened to me ... I tried everything. If I turned it off and put it back on it would print or copy but thats it. I finally just bought a new printer. HP officejet pro 8600 e all in one. Stay away from this one if you have to buy a new printer. Its not half as nice as the C7280. No preview when you print and you can't even pick which pages you want to print. A lot of wasted paper and ink! Seems quite a few of us are getting that error message from the C7280, maybe HP did something wrong and should compensate us for the malfuncuntion! Now I wish I didn't buy another HP.

Audigy 2 NX all lights flashing, not function

Similar Messages

Maybe you are looking for