Audigy 2 NX flashing lights solut

here its is and yes it works http://metawire.org/~nomel/eax_hack/test_mode/index.htm

I have mailed the adim twice suggesting it be a sticky but no response

Similar Messages

My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

I suddenly have two flashing lights on my keyboard by the caps lock key and over the end/pg up key.

I encountered a problem waking my laptop (Pavilion dv7-1270us) this morning. At first it would not wake up and had to do a hard reboot. Now I have two flashing lights on the keyboard -the caps lock light and the one over the end/pg up keys over the number pad. I have run several diagnostics and cannot find an answer as to what this is.
This question was solved.
View Solution.

Hi,
You're welcome and it's good to hear you've got it working
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I fix Cartridge Error and flashing light message on my 4215xi all-in-one? I use windows 8.1

This equipment was working just fine after I installed a re-filled black ink cartridge. A few days later I began to get a flashing light with the message: Cartridge Error. See Product Documentation for details. Sometimes my computer said the printer was offline when it wasn't. I have also had occasional cartridge door open messages when the door was closed. I have removed the two cartrdges, cleaned them with water by using a coffee filter as a swab. I have also uninstalled and, I think, reinstalled the software printer driver, but I am not entirely certain as to that.

Hi there @donpablitosan!
Thank you for posting on the HP Forums!
I would be happy to help in regards to the flashing lights and cartridge error on the printer. You had also mentioned that the computer sometimes shows the printer offline or door open errors. I should be able to help with that as well!
The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors or have poor connection and paper feed issues.
From what I can find it looks like you have done all the troubleshooting regarding the cartridge itself. If you have tried the above suggestion and are still getting the same issue then you may need to try another cartridge to see if the issue is coming from the printers hardware or the cartridge.
Thanks again for posting on the HP Forums!
Please post back and let me know how it goes and enjoy your day!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

N95 turn flash light on,and can't turn it off- Pro...

Hi, I have N95-1 firmware v21.0.016. I didn’t decide yet to update new v30, because some reviews I thought that it’s better to skip this and wait next.
The problem I experience with my device is that some time (it’s happened few times) in ordinary use (not camera use), my flash light (camera light) turn on and wont turn off even if I turn phone off. I tried removing the battery and the light goes off. As soon I put the battery back in the light comes on again even phone is still off. When I turn camera on (by opening it), light go off but when I close it it’s turn on again. I find solution, to take any picture, and after that everything goes back to normal.
Does any one else had experience like mine? What can provoke this behavior?
Solved!
Go to Solution.

First thanks for response.
Rrangel, thanks for advice, but I can turn my flash off. It simple, taking picture (and that is the only way for that) and after that everything go in normal. I can close camera and continue to use my phone normally (no flash light on). I can turn phone off and on again, it’s will work normally and no flash light problem. However, this might happened again.
I have 4 GB takems memo card in the phone. And phone wasn’t in contact with water or steam, it never fall or had any defect.
First I thought it’s because some third part application. When it’s happened first time, phone was running Rotate Me, Flip Silent (that I was just installed and test how it’s will work), Advanced Call Manager, and I was rejecting some phone call. I thought it’s because Flip Silent, but second time, phone didn’t run any of those applications, I was just change theme and flash light turn on.
First time I find out that, removing battery and restarting of the phone will not help, so I simply take picture, like first time (delete picture immediate after), and continue to use phone normally. I’m just confused what the reason is?

Flashing light in Wrotham supply. And not working wi-fi..

Hello.
Flashing light in Wrotham supply.
And not working wi-fi, or rather does not recognize the access point.
They are not on the list .
But the access point is at hand.
Please send me the answer to email (Personal information removed by Moderator)

Hi @Game_Developer
Welcome to the HP Support Forums!
I understand that you are having trouble with wifi connectivity. What light is flashing on that supply? I assume it is the power supply.
Have you tried your notebook with a different wireless network?
Do other devices connect to your router without any trouble?
I would start with this to make sure the wireless is working properly on the notebook, or appears correctly in device manager.
Resolving Universal WLAN, Wireless, and Wi-Fi Errors
And only after verfying that all is good, would you want to look at the following steps, if you are still having troubles.
Troubleshooting wireless network and Internet (Windows 8)
Also, you can look at the power management for your wireless adapter:
Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.
Forget the network: (Windows 8)
1. Press Windows Key + C
2. Click Settings.
3. Click Change PC settings.
4. Click Network on the left.
5. Click Manage known networks.
6. Click the network name.
7. Click Forget.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
Test an ethernet connection:
Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Strange noise and flashing lights -- can this be battery/power-related?

I have had two occurrences of a very strange sound and never-before-seen flashing of a light on my TiBook. Here is what happened:
I recently got a new battery (a NewerTech Extend 4800) for my 3 year-old PowerBook. I carefully followed the directions that came with the battery and installed it, then plugged in the power adapter to charge it up. I then started the computer so I could see the battery’s progress. Upon start-up, a “whooo” sort of sound came out of the computer for a few moments and the little sleep indicator light flashed several times (as did the apple light on the back of the computer lid). Nothing appeared to be out of order and the computer started normally otherwise. I was able to monitor the battery’s progress and since everything seemed to work normally and no one I talked to seemed to think I’d damaged anything, I just used the computer normally for the next two weeks with no problems.
Then last night the computer just shut down all by itself – I did not put it to sleep and it is not set to go to sleep on its own (my power saving setting is only set to dim the screen), nor did I click “shut down.” I thought perhaps somehow the power cord had not been attached and the battery had run down, although the new battery has been warning me properly when the battery is getting low, so that doesn’t make sense. It would not wake, so I restarted it. Upon restart, the same noise and flashing light situation occurred again.
I called the company that sold me the battery and the tech guy’s suggestion there was to reset the PMU and he gave me an Apple article to instruct me on how to do that. I have done that, but there is no evidence that that has solved whatever the issue was. I am hoping that someone can identify the sound and lights pattern and advise me as to whether it is some more serious issue, or if it’s nothing to worry about. It has been suggested to me that it is possibly a power adaptor issue, but since I’ve run down and recharged the battery without incident several times in between the two occurrences, that doesn’t seem logical either. Is there a known signal a computer makes when there is some power/charging issue?
Thanks for any help you have or for at least posting if you have had a similar experience. So far, no one I’ve talked to has ever heard of this before.
15" Powerbook G4 (tiBook), 1 Ghz, 1 GB, Super Drive Mac OS X (10.4.3)

Hi ChloeB,
Your description of the "moaning" sounds at startup sounds like something I'm dealing with. I came across the following post by EWW in the "My Powerbook Won't Start Up". I recommend the link and wish to specifically credit EWW with the posting, as I found it helpful. The URL is
http://discussions.apple.com/thread.jspa?threadID=380101&tstart=0
Begin Pasted Posting
Hi, limberlingo, and welcome to Apple Discussions.
Power On Self-Test Beep Definition - Part 2 (Oct. 1999 and later Macs)
http://docs.info.apple.com/article.html?artnum=58442
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your Powerbook is not detecting any good RAM at startup. This may indicate that your RAM (all of it — do you have one module or two installed?) has gone bad, or that it isn't seated properly. The first thing to try is reseating it: remove the module(s) and then reinsert it(them). Then try starting up again. If that doesn't do the trick, and you have only one RAM module, it's probably bad and will have to be replaced. A single RAM module having intermittent problems before failing completely (as it apparently has now) would account for all your problems.
If you have two modules, it's much less likely that both of them have failed or loosened in their slots simultaneously. Post back with results of your testing.
End of Pasted Post by EWW
There's another thread I found where one of the causes of a three-tone warning was found to be a pinched ribbon cable coming off the bottom of the trackpad. You can find that in the thread titled "Solution to Freezes Caused By Ribbon Cable" - - the information provided by Marc Posner, Anthony Brade and others.
The URL is
http://discussions.apple.com/thread.jspa?threadID=228678
Hope this helps.
Paratus

Flash light is not working in camera or Torch after upgrade

Hello
My S850 Flash light is not working while I click any Picture or while turning the torch ON. It was wprking perfectly before but after Upgrade it stopped working.
baseband version is: S850.ROW.V109,2014/09/23
BUILD NUMBER: S850_ROW_211_140923
Kalpesh

Hi
Sorry...The flash isn't working when you take pictures or the torch/flashlight isn't working?
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Flash light always on

when taking photos on my N73 with the flash light off mode the flash light is working.
while in shooting video mode flash light is always on.
any solution for the above problem

18-Feb-2008 05:28 PM
nithinsbt wrote:
when taking photos on my N73 with the flash light off mode the flash light is working.
while in shooting video mode flash light is always on.
any solution for the above problem
if your camera setting is automatic, the light will come on. you will have to personalize a setting with the light off and choose that setting when taking photos. you may have to do this everytime you start the camera because this phone isn't good at remembering settings as a result it reverts to automatic settings.
hope this helps.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Camera Issues -- Flash light

All the pictures I took with the flash light were covered by a white layer. My Z1 has been updated to the most recent version. I tried to use the auto-mode or manual mode. I always get a white layer, like I am in the fog on all my picture.
Please help!

Well, me and my friends were testing this phone and out of 20 people 2 had this problem i was one of them
... we all had same model of black xperia z1.
I managed to get to the bottom of this .... i think. First of all if u have additional case cover with too small "window" around the lens or additional protective foil the problem is getting even bigger.... foil transports more light fom flash so check if the photo is better wothout additional protective foil or case cover (im not talking about original one).
Anyway....
My phone has silver border around the lens and i had same problem over and over again. Sometimes when i restarted it i managed to get few pictures of god quality.........one day i just painted this silver border with thin black marker with caution and....viola.... problem dissapered... funny thing because out of 20 same models ony 2 experienced same problem ... all looked the same, dunno maybe flash is brighen on those 2 mabe some other problem ....anyway i know its not the best solution and it but it helped me. cheers

How to stop flashing lights using Playstation DualShock 3 controller in Mavericks?

Mavericks allows the Playstation DualShock 3 controller to pair via Bluetooth very quickly, however the lights on the controller keep flashing like the controller is still in pairing mode. The controls work fine, but I worry that the flashing lights will drain the controller battery.
Does anyone have experience with this? I bought the controller specficially because I read that Mavericks supported the controller.
I'm using a 15" rMBP late 2013.

I recently purchased and paired the DualShock 3 to Mavericks 10.9.5. I'm having the exact same experience as Brian noted above: it works great, but the 4 lights blink continuously. If anyone has any thoughts or Brian if you every found a solution to this, I'd appreciate the input.
Thanks!

Weak flash light

hi
I have a simple problem with my device
I think flash light have been so weak after update to android 5
Could you please help me if there is any solution
( i doubt if the probloem was from the beginning or after update :-D )

If it's faulty and your device is within warranty (depending on your country) you should be able to get it repaired/replaced.
Best you speak to Apple directly to get this sorted out. Go to http://www.apple.com/support/contact/ to get started.
Hope you get this sorted

White flash light on Nokia N95

do enyone know trick or app to have white flash light on for a few minutes?

Hi, assuming you want to use the flash as a torch, try this
http://www.symbian-freak.com/news/007/09/freeware_the_all_in_one_torch.htm
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Green flashing light

Are you able to have your light flashing green like past Blackberries?
Solved!
Go to Solution.

Hello. The green flashing light feature alerting you about signal appears to have been removed and is not available for BlackBerry 10. At least not yet.
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Green Flashing light (BB Torch 9800)

Can someone please explain to me how to get rid of a green flashing light on a BB Torch 9800.
You assistance is appreciated
Thank you

On your homescreen, go to Options/Settings
Click on Display > Screen Display.
Scroll down to LED Coverage Indicator and UNclick that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Audigy 2 NX flashing lights solut

Similar Messages

Maybe you are looking for