Audigy 2 NX Remote Control Issues

I am unable to use the remote control bundled with the Audigy 2 NX for anything but (un)muting and changing the volume. Obviously the remote is sending the signal and the box is receiving it. I've installed the latest version of Creative MediaSource 3 and the remote control manager:
CMS_PCAPP_LB_3_30_2.exe
CMS_RMT_PCAPP_LB_2_30_02.exe
I have made sure that "Enable Creative MediaSource Remote Control" is enabled and that I have selected the proper remote model, "Creative RM-500," in the Remote Control & OSD Settings menu. Howerver, under "Select this as the remote control receiver:" there are no devices available. Yet the Audigy 2 NX is plugged in and functioning. It shows up as my acti've sound output device and I am able to play sound through it.
Any suggestions
I'm running Window's Vista 32bit with 4 GB of RAM and an Intel Core2 Duo T9400 at 2.53GHz.
Thanks!

I have a small problem of my own.
I have a setup like Laptop---> Audigy 2NX -----> Analog 7. spkr system on Windows Vista 32 bit.
I am having a hell of a time in getting the SPDIF to work.
Do you know how to get sound from the SPDIF?
I thought the new drivers I installed? would solve the problem. But with them, the SPDIF I/O controls are greyed out and there is no sound through the speakers when I set SPDIF as default speakers.
Hi ppkumar,
So do you mean that when you set SPDIF as default speakers, you do not get any sound through the analog 7. speakers system that is connected to the Audigy 2 NX? Is there any sound from the SPDIF? When default is set to SPEAKERS instead of SPDIF, does your analog 7. speakers work correctly?
If you get sound from your SPDIF but not your analog 7. speakers when default is set to SPDIF, and sound from your analog 7. speakers but not the spdif when SPEAKER is default, then I would think the Audigy 2 NX is behaving correctly since that would be what I would expect.

Similar Messages

SB Audigy 2 Platinum Remote Control Problem, Need THis Resolved quic

Hi
this is a Known issue to Symantec Support, I really really want to be able to use my Audigy 2 Remote Control with this Soundcard, but I can't, until Symantec or YOUR SLOW AS MOLASSES COMPANY UPDATES MEDIASOURCE SOFTWARE SO THESE 2 PROGRAMS DON"T CONFLICT, WITH REMOTE CENTER LOADING ON STARTUP, IT WILL NOT LOAD AUTOPROTECT FOR NORTON ANTIVIRUS 2005
FIX THIS, and quickly, is all I have to say
Or let use SB Audigy 2 Platinum Users download the newest versions of the software
Message Edited by bikeman on 0-22-2004 03:34 AM

Hi
I don't have that file on startup--SBDrvdet, All I have is Creative DVD Audio Driver Detector, CTHelper, and RCman, which is disabled so Norton's Autoprotect will work ok.
Thanks for the reply though
Here is Symantecs workaround, I guess I can li've with these, but if Norton's Autoprotect winds up disabling by this workaround, and I happen to get a trojan or virus in..then I won't be very happy
To stop Creative MediaSource Go! from running when the computer starts
On the Windows taskbar, click Start >Programs >Creative >Creative MediaSource Go!, and then click Creative MediaSource Go!</LI>
Right-click anywhere on Creative MediaSource Go!</LI>
In the new window that appears, click Close. This prevents the program from loading when the computer starts.</LI>
Do one of the following:
If you also have Creative RemoteCenter, then go on to "To stop Creative RemoteCenter from running when the computer starts."</LI>
If you do not have Creative RemoteCenter, then restart the computer and go to the next step.</LI>
</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable Creative MediaSource Go!</LI>
To stop Creative RemoteCenter from running when the computer starts
Do one of the following:
In Windows XP, on the taskbar, click Start >Control Panel >Remote Control Center.</LI>
In Windows 2000, on the taskbar, click Start >Settings >Control Panel >Remote Control Center.</LI>
</LI>
Uncheck Enable RemoteCenter.</LI>
Uncheck Show RemoteCenter icon on taskbar.</LI>
Uncheck Show RemoteCenter splash screen when RemoteCenter is started.</LI>
Restart the computer.</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable RemoteCenter. To re-enable RemoteCenter, repeat steps through 5, this time checking each entry.You must repeat these steps whenever you start the computer.</LI>
After Disabling Creative DVD Audio Detector, I reenabled the Remote Control and restarted, and so far so good last 2 days without a conflict With Norton Antivirus, if it really does solve the problem, I will email Symantec Support and let them know the solution, so they can inform other users with the same problem, since obviously creative doesn't want to assist them in finding the problem or provide help fixing it. So far Remote Control hasn't been an issue, but I'm gonna wait til end of month to send off an email to Symantec to make sure it's actually fixed. Since if it doesn't drop out of me by then, then I know it's fixed, since was only in 2 weeks before it got the internal program error before.
Message Edited by bikeman on 0-25-200404:47 AM
Message Edited by bikeman on 0-25-2004 04:47 AM
Message Edited by bikeman on 0-29-2004 04:08 AM

VMM 2013 R2 Manager - Remote Control issue

Hello Everyone,
Looks like Im having a remote control to the VMM server issue. Everytime I try to connect to console of the VM machine, I get this error:
"An authentication error has occurred Code: 0x80004005" Remote computer: servername.mydomain.com"
The VMM server has been added to our domain and I'm logged in as the Domain Admin. Is there a permissions group I might be missing or is it something else?
Please Let me know
Thank you
Devon

The 'first' VMM administrator is the domain user account of the logged on user that installed VMM.
If the domain admin performed the install of VMM, then they would be the first administrator by default. If someone else did, than that user is the first administrator and they have to add the domain admin as an SCVMM administrator within SCVMM.
Also, you cannot move an SCVMM server from one domain to another. You will end up with broken security. You have to re-install SCVMM.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Audigy Zs Platinum Remote Control Driver For windows Vist

Anybody knows when will this come out', i can't use my remote.

I miss my audigy 2 platinum remote too...... I wonder if it will control windows media center

Remote control issue with only some users

I'm having an issue that I can't seem to find any reference to anywhere.
Our client has two servers. One is Server 2003 and is running AD, the other is 2008R2 and is running terminal services.
When I create a new user in AD, if I set the option in AD to allow remote control, do not require permission and interact and I set these options before the first time the user logs into the terminal then I can remote control that user's session without
a problem.
However, if I leave the defaults in AD to allow remote control but require the user's permission and the user logs into the terminal the first time with permissions set like that then forever more I can never remote into that user's sessions. Changing the
options in AD later to not require user's permission no longer helps. When I try to remote into that user's session the user does not get a pop-up requesting permission, rather I just get an Access Denied message. If I try to shadow via an elevated command
prompt I get error 317. I haven't been able to find any differences in GP or the registry between users that I can shadow and those I can't. Some setting specific to each user is getting set on first login that can't seem to be undone by changing the settings
in AD. Where might I find this?
Thanks!

Hi,
Thank you for posting in Windows Server Forum.
Please check that you have added user under “Remote Desktop User” local group. In addition they are
added under GPO setting “Allow logon through Remote Desktop Services” and
not added under “Deny logon through Remote Desktop Services”.
You can check the setting under below mention path.
GPO_name\Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment
More information:
Allow log on through Remote Desktop Services
http://technet.microsoft.com/en-us/library/dn221985.aspx
In addition please check that you are not limiting in number of users who can connect simultaneously and also verify Remote Desktop Services Logon rights. Please check beneath article for additional details.
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176
Hope it helps!
Thanks,
Dharmesh

AUDIGY 2 PLATINUM REMOTE CONTROL SSOFTWARE QUESTION.......

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

Audigy 2 ZS Remote control (RM-1500) and DVD-player. (Need he

I've got Audigy 2 ZS platinum with remote RM-500, but software included in package allows to play only DVD-audio. Creative recomend to install InterVideo DVD 5 to play video DVD with Creative Audio-DVD program.
I've got InterVideo DVD 6 Platinum, but it doesn't controlled by RM-500 (there is no problems with my logitech Cordless keyboard with media buttons). As I found out there is differens in buttons menu: Creative use Enter for play, Spase bar for Pause, ect., but standart windows programs use Ctr+P and Ctr+Shift+P.
Does Creative have patch that solve this problem. To have remote that cann't contol DVD player (exept Audio DVD) is useless stuff.

Skeleton,
Have you added the DVD player software to the external applications listing under the remote control tab in MediaSource settings. The controls on the remote are mapped to the keys as defined by Microsoft. If the program is compliant to this then it should work.
Jeremy

ZCM 11.2.3 Remote Control Issue

I have zcm 11.2.3 MU1 installed.. I just imaged a few windows 7 64 bit computers ... installed agent and novell client.. all seems to work just fine with them (ie policies, inventory etc) BUT I cannot remote control them..I Get a failed to connect to server when I try to remote control (both Ip address and DNS name).. I turned off the firewall and that made no difference.. anyone tell me where to look for logs to see why it is failing on these computers ??.. I can remote control other computers no problem

Originally Posted by roehmdo
thanks - the remote policy if definitely applied to these workstations... looking at the tid,, would these logs exist on the workstation or the server ?
It's all in the TID
Component Name: Remote Management
Enable Debugging:
Device being remoted:
Set agent logging to debug and above with zicon.
Stop “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Windows workstation set:
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugMode
Type: DWORD
Data: 2
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugLevel
Type: DWORD
Data: decimal value 10 or hex value ' a'
Location for x64 Windows 7:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Novell\ZCM \Remote Management\Agent
After the above registry changes, Restart “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Device running the browser performing Remote Management:
In the Remote Management Dialog box, select "More Options" and check "Enable logging"
Log Locations:
Device being remoted:
Windows workstation:
%ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Windows Vista workstation:
%ZENWORKS_HOME%\logs\WinVncApp.log %ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Device running the browser performing Remote Management:
novell-zenworks-vncviewer.txt
location:
Internet Explorer 7 on W2003 or XP: Current user's desktop
Internet Explorer 7 on Vista: last directory browsed from IE 7
Firefox: Firefox directory, for example, C:\Program Files\Mozilla Firefox
From the server used for ZCC to RM:
loader-messages.log
services-messages.log
zcc.log
Thomas

Apple TV Remote COntrol Issues....

Our Apple TV remote stopped working after a few months of use...
We replaced the battery, but it still does NOT work.
Wondering if there is anyway to troubleshoot the remote itself?
Hopefully we are not out another $20 for the replacement - haven't used it that much!
Thanks in advance for any guidance.
VR,
The Ryans

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Remote Control and error 1456

We are having a Remote control issue with more and more PC's. If they are
logged in, we can remote control them. If they have bee restarted and are
waiting to log in, then we can not remote control them. We Can use
diagnostics on them though....
Zen 4.01 ir7 is where we are.
We are also having an issue where many times after imaging, the ISD is not
populated into windows, and gets associated with our Image PC's workstation
object. If we clear the ISD, delete both workstation objects, and reboot the
target PC, it does re-import correctly. The remote control issue does not
get fixed when this happens though....
I have seen that rmerrorlog.txt has been asked for in the past to help solve
this issue, so We are including that. Any help in resolving what we have set
wrong is appreciated.
Thanks,
Mark Waters, CNA
John Evans, MCNE
Systems Group
Housing and Food Services
Michigan State University
watersmd at mail dot hfs dot msu dot edu
1st attempt to remote control target PC was not Logged in. It Failed - Error
1456.
2nd attempt was when target PC was logged in. It Worked.
PC with ConsoleOne - A004686
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
returning -201
#(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
Successful!!!
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
#(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out WallPaperRequest
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
Startreceiving event
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread : Received
Startreceiving Event
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
Command
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of did->DrishtiType
sent to Agent is 1
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
Packet succesfully
#(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
reallocation
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
event
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
ReceiveData(For Header) is -1
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of StartReceiveThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
HandleRCSession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
Target PC - A003514
#(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
operations disabled.
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 0, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 1, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for master replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
server
#(768)# 11:45:47 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading boolean
attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
user:, tree:HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
'z_Global Workstation Package:General:Remote Control
Policy.WorkstationPackages.Workstations.UHsg.HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
#(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
active...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : 0
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
over...
#(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
#(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
successfully
#(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed RcAgent.DLL's
Init Proc Address
#(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
#(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
#(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
#(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
#(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote Control
session for P1.
#(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
#(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
#(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
#(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
ESC_START_VIEWING_DARPAN Successful
#(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
#(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
#(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
#(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
returned. Closed thread is = 1
#(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
session is set
#(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in send
thread
#(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window. Calling
CloseConnection().
#(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
#(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
#(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
#(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
#(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
hAcceptThread Signals
#(768)# 11:47:12 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
successfully unloaded from memory
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory ...
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory and it is forcefully unloaded...
#(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
#(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin

Delete a few test workstation objects. Delete the object that was created by
the Image PC. Run DSREPAIR. Disable windows firewall. Reboot the PCs. Check
if the Workstation objects are created and if you can remotely control
them.
"Mark Waters" <[email protected]> wrote in message
news:[email protected]...
> We are having a Remote control issue with more and more PC's. If they are
> logged in, we can remote control them. If they have bee restarted and are
> waiting to log in, then we can not remote control them. We Can use
> diagnostics on them though....
> Zen 4.01 ir7 is where we are.
> We are also having an issue where many times after imaging, the ISD is not
> populated into windows, and gets associated with our Image PC's
> workstation
> object. If we clear the ISD, delete both workstation objects, and reboot
> the
> target PC, it does re-import correctly. The remote control issue does not
> get fixed when this happens though....
> I have seen that rmerrorlog.txt has been asked for in the past to help
> solve
> this issue, so We are including that. Any help in resolving what we have
> set
> wrong is appreciated.
>
> Thanks,
> Mark Waters, CNA
> John Evans, MCNE
> Systems Group
> Housing and Food Services
> Michigan State University
> watersmd at mail dot hfs dot msu dot edu
>
>
> 1st attempt to remote control target PC was not Logged in. It Failed -
> Error
> 1456.
> 2nd attempt was when target PC was logged in. It Worked.
>
>
> PC with ConsoleOne - A004686
>
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
> returned FALSE
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
> returning -201
> #(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
>
>
>
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
> Successful!!!
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out
> WallPaperRequest
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
> Startreceiving event
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread :
> Received
> Startreceiving Event
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
> Command
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of
> did->DrishtiType
> sent to Agent is 1
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
> Packet succesfully
> #(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
> reallocation
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
> event
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
> ReceiveData(For Header) is -1
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of
> StartReceiveThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread
> terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
> HandleRCSession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
>
>
> Target PC - A003514
>
> #(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
> operations disabled.
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 0, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 1, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for master replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
> server
> #(768)# 11:45:47 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
>
>
> #(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading
> boolean
> attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
> user:, tree:HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
> 'z_Global Workstation Package:General:Remote Control
> Policy.WorkstationPackages.Workstations.UHsg.HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
> #(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
> active...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : 0
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
> over...
> #(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
> #(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
> successfully
> #(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed
> RcAgent.DLL's
> Init Proc Address
> #(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
> #(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
> #(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote
> Control
> session for P1.
> #(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
> #(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
> #(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
> #(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
> ESC_START_VIEWING_DARPAN Successful
> #(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
> #(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
> #(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
> #(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
> returned. Closed thread is = 1
> #(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
> session is set
> #(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in
> send
> thread
> #(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window.
> Calling
> CloseConnection().
> #(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
> #(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
> #(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
> hAcceptThread Signals
> #(768)# 11:47:12 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
> successfully unloaded from memory
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory ...
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory and it is forcefully unloaded...
> #(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin
>

Remote Control and Firewall WinXP SP2

Does any of you guys know how to prepare WindowsXP SP2 release which would
enable firewall settings when installed?
What is the most efficient way to handle this? I am just trying to prepare
the remote control issue before SP2 is released.
Thanks in advance for your input.
Jeff

hi,
you can open port that is need for ZENworksPORT UDP : 17611762 TCP:
21, 517,1763.
I can remote management a workstation that is a windows xp with sp2 now.
"Michael Rhoadarmer" <[email protected]> дʼ
news:Tnntc.920$[email protected]..
> 1761 1762 1763
>
> >>> Michael Rhoadarmer<[email protected]> 05/27/2004
9:58:35 AM >>>
> We open up 1761,3, & 3 TCP and use [localhost] for the field for computer
host. (inclued the brackets)
>
> >>> JS<[email protected]> 05/21/2004 4:18:35 PM >>>
> Does any of you guys know how to prepare WindowsXP SP2 release which would
> enable firewall settings when installed?
> What is the most efficient way to handle this? I am just trying to prepare
> the remote control issue before SP2 is released.
>
> Thanks in advance for your input.
>
> Jeff
>
>
>
>
>
>

Help me i cannot use my remote-control.

I was using my remote-control a while ago( I think it's been only for 5 mins) , then suddenly It didn't work, how can i fix it? do i have to bring it to mac store?
Message was edited by: BENHONG

I'm having remote control issues as well. It stops working, and the option to disable or enable the IR receiver disappears from the security pane of system preferences. If I start and restart my Mac several times, I can usually bring it back. I use the remote frequently for watching movies. The resetting procedure doesn't work. Anyone know how to deal with this?

Remote control of ipad by hand movements

I think iPad can be remote controlled by hand movements and this is especially necessary in case when you put it on the table and want to change the page of the ebook or want to shift to another song. In such cases, you don't want to handle the iPad, just lazilyyou may want to control it by hand gestures or just say, by your voice. Such control can be made by an app, I think.

Hi John, I don't suppose you got any further with your ipad remote control issue. I'm in a similar situation with an elderly relative, and wondered if Mobile Me might help? We're in the process of setting up an iPad2 from our own iTunes account (might be a different scenario to yours if your dad has his own iTunes a/c?) and as yet don't know if we can actually do what we would like to do... ie. update apps remotely when required, download software for them. I know it's a major hand holding exercise, but at present they're out of internet loop completely and miss out so much, on things like, research/browsing, on-line offers, maps to get places, e-mail etc. And in most cases once these things are set up, interconnectivity is one button push away. So if you have any advice or pointers, they would be very much appreciated.
Also this is not on wifi, as getting broadband for someone else is another story, so it's planned just to be 3G on '3' for now. facetime would be good but don't think the 3G connection would even let you near that, and also I have no idea how much data that would eat up.

Issue with KB2830477 and SCCM 2012 Remote Control Viewer

I've just rolled out Feb '13 updates for Windows 7. The update KB2830477 appears to cause
an issue when closing a remote control session using SCCM Remote Control Viewer
(2012).
The following error appears:
"ConfigMgr Remote Control Viewer has Stopped Working"
"A Problem Caused the Program to Stop Workingcorrectly. Please Close the
Program"
In the Event log, the following event is triggered in Windows Logs>Application.
Faulting application name: CmRcViewer.exe, version: 5.0.7711.0, time stamp: 0x4f42f979
Faulting module name: msxml6.dll, version: 6.30.7601.17988, time stamp: 0x5091ff29
Exception code: 0xc0000005
Fault offset: 0x00056368
Faulting process id: 0x24c0
Faulting application start time: 0x01cf2d7bf99dc96d
Faulting application path: C:\Program Files\Microsoft Configuration
Manager\RemoteControlViewer\CmRcViewer.exe
Faulting module path: C:\Windows\System32\msxml6.dll
This is with an EventID: 1000. Removing the update resolves the issue.
Report Id:
36c3642d-9970-11e3-89bd-028037ec0200

Hi,
I recommend you check the log file CMRcViewer.log:
It records details about the activity of the remote control viewer.
Located in the %temp% folder on the computer running the remote control viewer.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I don't know how to USE my remote control on my AUDIGY 2 ZS Platinum

I followed the instructions on this page: http://support.creative.com/kb/showa....aspx?sid=2965
about activating my remote control for my AUDIGY 2 ZS Platinum but mediasource did not have a remote control option tab as you can see here...
Untitled.jpg
I just changed the battery on my remote and the receiver blinks when I press a button on the remote but nothing happen no volume change or nothing.
Don't know what else I should do.

You can import the contacts from SIM.
It is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Audigy 2 NX Remote Control Issues

Similar Messages

Maybe you are looking for