Audigy 2 Platinum EX and Windows 7 :'''(

)Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
I've just tried with official driver and update.... last driver are very very bad :'''(
I've partly resolved with unofficial drivers (downloaded on this forum) but external module
still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
unusable.... how can i do? Can you help me, plz?
TXH to all.
P.S.
Excuse me for my english....

Similar Messages

Audigy 2 Platinum EX and Windows Server 2

Just upgraded from Windows SBS 2003 to Windows Server 2003. My Audigy 2 Platinum EX seems to be working properly, but my microphone now only pops and crackles. I did not have this problem on SBS 2003. I am running Server 2003 SP and have the latest drivers for the sound card. Please assist with this issue.

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

Audigy 2 Platinum sound problems (Windows XP S

Hi,
I recently formatted my computer and am having problems with my audigy 2 when listening to any sounds through my speakers-- headphones through the front panel sound fine! The best way to describe the sound is that it is 'fuzzy'... not an on-and-off fuzzy, but a constant fuzzy. I've tried playing with many of the options in Audio Console to no avail. Has anyone else experienced similar problems and found a solution? ANY help would be greatly appreciated... thanks!!

I found the solution that worked for me!
In the volume control for windows, I had to mute the microphone in playback mode, and check the box for 'Selected' in recording mode. To switch between the 2 modes, go to 'Properties' in the 'Options' menu. Hopefully this works for you like it did for me

Msi K9N2 Platinum SLI and Windows Server 2003 r2 32 bit edition

Does anyone know or have tried to get this board to work on server 2003 32 bit edition. I seem to get past the raid part but the realtek 8211bl and audio are giving me fits. Any links to good drivers would be appreciated.
Spec of system:
Amd 9950 Quad
4 gig memory
Msi K9N2 Platinum SLI
2 500 gig sata

Ok overall solution this board works awesome with Windows Server 2003 Enterprise R2 with Sp 2.
Here are a few tricks for the Co processor controller, Sm Bus, Audio and finally the networking controller.
When you finally get windows loaded. Make sure you put Service Pack 2 or 3 on before u install drivers.
The raid drivers are simple for the 32 bit version use the xp ones and load both raid drivers during setup. Requires 2 floppys or Slipstream disk.
http://global.msi.com.tw/index.php?func=driverfile&dno=7067&i=2
Once you get windows loaded and Sp 2 or better on. Stick in your windows vista driver disk in. Once there do not install anything.
Goto device manager and update drivers on all that are with the yellow ? excpet the networking drivers and just do an automatic search and boom your done. It will also ask you if you want to enable your audio at this time. Do so but do not reboot untill u finish installing all drivers but networking. Than reboot pc
Last part is for networking card. We need you to be in safe mode for this. So once u install all drivers and start reboot hit F8 and goto safe mode. Once in safe mode take out vista driver disk and put in xp driver disk. Goto device manager and update driver on network controller and let it do an automatic search and it will installl it. It will say it needs to be rebooted to work. Go ahead and reboot and your networking card will work.
Probably simpliar solution. But just wanted to give my help.

I can't hear my SPIDF IN on my Audigy 2 Platinum afer installing Windows Vista Dri

After installed the latest driver 6.03.07, i can't her me digitial coaxial in, it's recording but i can't hear anything in realtime, also i can't recieve information over my MIDI in and Out-puts at the front panel! It's also impossible to downgrade the driver to the beta versions, the problem stays the same!?Who can help?!

I have the exact same problem. Anyone have a solution?

Audigy 2 platinum eX prob

i have a audigy 2 platinum eX and my inline 2 ans makin weird noise... it only workin when i juss restarted my computer... slowly after 2 or 3 minute, the noise come, and i can use these inline anymore.
Also i cant use the headphone jack i juss cant select in the playback device.
Another thing,
my hardware is listed like (default device) to be a "SB Audigy 2 Audio [D800]"
i dont think this is normal.
i really need help
wath can i do to resolve these problem ?
(my first language is french so if u dont understanstand plz juss tell me i try to make me understand)Message Edited by bloodleak on 07-5-2005 07:20 AM

A lot of points here: first try reinserting the card, do not uninstall the drivers. Sometimes the card does not seat correctly in the PCI slot which if partially connected will cause the computer to continually verify what hardware is installed but loops off at that stage.
Take the card out (PC off) and firmly reinsert so your <EM>hear</EM> it seat fully home.
The Audigy should be in PCI slot 3.
If this does not work I think you may be looking at formatting your HDD and do a fresh install of windows. If you do decide to do this remember to install drivers in the correct order - INF chipset, windows update, video, audigy, wireless, others, rebooting twice between each.
Re which board, Intel does not boast as many features as some other boards but is more robust and everybody tests their products on a Intel board.
Re 64 bit, Creative are alpha testing 64 bit drivers now.
Re Asus should be ok, if anything Asus are suseptable to power problems.
Re RAM definitly not the problem
Re VIA not likely but possible

Audigy 2 ZS Platinum and Windows 7 problems

Hi there,
Recently upgraded to a new PC and Windows 7, and am gutted that the audio/interface card no longer seems to work. I mean, it works for simple listening duties, but the Line In/Mic, "What You Hear" etc., are all registered as "currently unavailable". I home record a radio show, so I'm in a panic to get the card working properly. I'd have to downgrade to XP.
The current drivers available are listed as working for Windows 7 on the Creative site, not sure they should be up when they don't.
Any sign of a resolution for this, or ideas what I could do?

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

Audigy 2 ZS platinum pro and msvcrt.

scard: Audigy 2 ZS Platinum Pro
OS: Windows XP SP3
msvcrt.dll: 7.0.2600.552 located only in windows\system32 and windows\ServicePackFiles\i386
I tried to update the driver. (Full uninstall of the previous one as per the FAQ plus some cleaning tools like Driver Sweeper, Driver Cleaner, regcleaners etc) I started getting MANY msgs about "different".exe - ENTRY POINT NOT FOUND "The procedure entry point _mbsnbcpy_s could not be located in dynamic link library msvcrt.dll" (the"different".exe contains eg. CTRegSvr.EXE among others).
After restart the driver works but I don't have access to any Creative tools like the mixer for example. It's just the sound working. Nothing else.
I uninstalled everything again. After the previously described cleaning proccess I tried to reinstall the old driver from the installation CD. Same thing. Many errors during the installation proccess about "ENTRY POINT NOT FOUND on msvcrt.dll".
Any Ideas?
I appreciate the help
Pan

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Audigy 2 Platinum, cracks, pops and had enough! Please he

Hi everyone, OK, I know this has been documented before, but I cannot get a resolution. I have an Audigy 2 Platinum. Most importantly, I just built one huge PC out of two perfectly working PC's. The PC the Audigy 2 Platinum was in, was working fine. Now, in my new super duper pc that has everything, it is crackling and popping all over the place, and its really driving me mad. The only time it doesn't crack and pop is when playing a sound file back through Windows Media Player, but i use multi-tracking software, so that doesn't help!
OK, I have two MARC 8 channel soundcards also in my new PC, but they do not conflict. Trust me, they don't. (I removed them and i still had the same fault) I think it is the onboard soundcard on the new Motherboard i have as I checked in MSCONFIG32 and sure enough, it shared the same IRQ. I cannot find how to disable this onboard soundcard in my BIOS which is ASUS Revision 05 (Award Medallion v6.0) Please help as it is driving me into oblivion!
The other difference this PC has over my old one is that it has 4 SCSI divices, two Hard dri'ves (one removable) one 2.2gb ORB dri've, and standard CD dri've.
Please help me!! I am going mad!
Rich

Hi guys
If your computer has any VIA chipset, and if your computer has any of the following problems, then you might need this driver.
The computer stops ("freezes", "hangs", "locks up"), or makes unusual noises when playing sounds.
The computer stops, or files are corrupted, when copying to or from an IDE DVD, CDROM, or CDRW dri've.
Sounds played by the computer are distorted or have a "crackling" noise.
The computer stops when playing 3D graphics or games, especially on an ATI Radeon series video card</LI>
There is a patch for VIA chipset and the patch WORKS for me! Try them at - http://www.georgebreese.com/net/software/ Look under "PCI Latency" patch for VIA chipsets. If you do not have a VIA chipset, you could also try the Turbo patch mention at that website.

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Audigy 5 Rx and windows 7 64

I have just purchased the Audigy 5 Rx and windows 7 64 will not install this sound card , I can find in the device manager the Multimedia Audio controller card but when I try to install the drivers windows returns an error in installing them is there a trick or something I am missing , I have tried since Dec 30 with no luck even took the card out and put it back in , I am using a PCIe slot

Look on your CD for a "drivers" folder and then the WDM. You can browse to this in device manager and manually install your drivers by finding your AUDIGY 5, double clicking, then choose update driver, and then browse my computer for driver software. After installing, reboot. Retest the card. I have done this several times over the years when "setup.exe" on the CD wont work.

Soundblaster Audigy and Windows

I've just installed Windows XP on a new hard dri've. I'm running an older computer with a 700mhz Celeron processor with an Audigy soundcard. On Windows ME it worked fine, but since upgrading, sounds work fine, but when I try playing music of any kind it locks my machine up so bad I have to shut it down manually. I've tried reinstalling Windows and the soundcard drivers, and nothing works. Is there a known issue with the Audigy and Windows XP?
I'm greatful for anything you can tell me, I'm at a loss.
Thank you

Why bother with Microsoft?
They didn't even add in 6. in Windows XP
Seriously, use Creative Speaker Settings.

Cracking and popping noise Sound Blaster x-Fi Platinum Running on Windows 7 32 Bit

Hi everyone, I am using a x-fi platinum card and it simply wont work with Windows 7 Ultimate 32 Bit. I have been using both windows 7 public beta and release candidate for last 8 months. Let me give you my PC configuration.
Intel Pentium D 3.4GHz
2GB DDR2 Memory running in Dual Channel Mode
ATI Radeon HD 4670 Video Card With 52MB DDR3
It has a built in sound on mother board (Disabled at the moment)
With the above configuration I tried using my x-fi platinum on both Windows XP and Windows Vista, and it worked perfectly without any problem. When I upgraded to windows 7 beta for the first time with the creative beta driver for windows 7, I noticed that whenever there is any on screen activity, such as minimizing and maximizing windows, switching windows, scrolling, photo or webpage transition, etc. there are cracking and popping noises. And if there are continuous or too much activity on the screen at some times the sound card completely fails and unable to provide any sound. When I took the sound card out and enabled the on board audio chip (Realtek HD Audio), the sound was fine without any cracking or popping issue. I eventually upgraded to Windows 7 RC and also currently using the latest driver for windows 7 and I am still having the same problem. As a reasult I am being forced to use the on board realtek audio solution which provides really crappy sound compared to x-fi platinum.
It appears that the problem exists only when I try to run x-fi platinum on windows 7. I really hope there is a solution for this otherwise I will have to sell my beloved sound card which I have been using for at least 3 years on ebay and stick with low quality Realtek HD sound system.

Sille wrote:
seems X-FI cards got the problem.... shud be hotfixed by creative.
Not all of them, I have none of those problems with my Xtreme Music. This won't help the guy asking about the Xtreme Audio (search the Sound Blaster section for the one for your card), but using this,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485
with this installed over the top,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Auzen-Forte-driver-2-20-000-HomeTheater-HD-RC4/td-p/53548
I don't get any of the popping and cracking that others do.

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Audigy 2 Platinum EX and Windows 7 :'''(

Similar Messages

Maybe you are looking for