Audigy 2 Platinum EX PC Not recognising the external
Audigy 2 Platinum EX - PC does not recognising the external box
Please if you have any questions feel free to ask...
thanks
---dan---
I Have just rebooted my pc also, but still no luck
When windows boots up it comes up with an error message saying
"Detection for audigy 2 External I/O Module is not connected to your audigy 2 card"
Similar Messages
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
My mac will not recognise the camera on my iphone so i cannot move my photo's
my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?
Hi Sylvia's iMac,
Welcome to the Apple Support Communities!
It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
Cheers,
Joe -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
I have recently changed lap tops and moved my itunes library successfully.
However I cannot now synce my ipod classic with the new windows pc.
The lap top is not recognising the ipod.
I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
Thank youHere is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Equium M50 will not recognise the LAN port - error: Network Cable unplugged
I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
Anyone out there with a similar experience and some advice/suggestions?
PLEASEHi
For me it doesnt show like a LAN card problem but your router is a problem.
Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
The issue has stared after installing or connecting the new Netgear modem router.
Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
I have found additionally these useful websites
http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html -
I have recently purchased a used iPhone 4, when I pulg it into my pc a skull icon appears instead of the apple. The pc also does not recognise the iPhone. The phone was originally purchased in March of this year, so it is under 12 months old. Has anybody encountered this problem and or know how I can fix the phone? Thanks
You have apparently purchased a jailbroken phone. You can try to get it into recovery mode, then restore as new, but no guarantee it will work.
http://support.apple.com/kb/ht1808 -
Windows 7 installation will not recognise the Bootcamp disc!
I have a 2008 Macbook running Snow leopard.
Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
Any ideas
Thanks in advanceIf you used your Leopard DVD then it won't work.
As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
Stefan -
I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone. How do I get rid of the old Apple ID when it comes to upgrading apps.
I have been into setting>store and signed out and signed back in and it still asks for old ID and password.Everything you've had up to now has been tied to your old Apple ID. You cannot switch it over to a new Apple ID. You should contact iTunes support to help you with this:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us -
trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem
Here are a couple links that might help
Error "The serial number is not valid for this product" | Creative Suite
Creative Cloud applications ask for serial number
And try using this cleaner
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
I am trying to connect my iPad to a canon printer and the iPad is not recognising the printer? What do I do?
There are troubleshooting suggestions at the bottom of this article:
AirPrint basics -
when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!
Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop -
I have an existing account with an iPod classic device. I now have a new nano and want to add this as a secondary device. However when I connect this my account will not recognise the new device. How do I resolve this?
I have 4 iPods all utilizing iTunes on the same computer. If you open iTunes and THEN connect the new nano, it should automatically recognize it. Does it give you an error message?
-
My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?
Welcome to the Apple Support Communities
Try resetting the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, take the Mac to an Apple Store to get it diagnosed
Maybe you are looking for
-
Cure for "501 Method Not Implemented" error at site in Firefox but not Chrome or IE?
I am receiving a "501 Method Not Implemented" error message at a site in Firefox but not in Chrome or IE. How can this be cured?
-
Assigning more than 1000 orders in one WBS
Hi Experts, I have a requirement of assigning more than 1000 Orders to one WBS element. As per SAP note, a maximum of 1000 Orders can be asssigned to one WBS otherwise system performance may get affected. But as per the client requirement, either I s
-
Using widget library for menus - BAM
Hi I am using a widget library Composition - Featured News as a BAM and although I have the background set to solid white in all states, it does not prevent the text from the various pages showing through the drop down BAM. Any solutions to this plea
-
Hi All, There is report which took long time to execute hence i scheduled that, but this report is taking very long to display the output than expected. The status of this report shows Running Query. I want to kill that scheduled workbook, is there a
-
I had my IPad 2 jailbroken and deleted Cydia from it but still have some apps that are still on my IPad and no way to delete them. I have tried to restore it several times and it just keeps giving me an error message. I have tried deisabling firewall