Audigy 2 Platinum EX Power Cord Question, pls he

I have an Audigy 2 Platinum EX with the external I/O box. I switched the room's my computers were in a while back, so I switched soundcard's to keep the I/O Box and surround sound speakers in the same room. Apparently When I switched them I did not hook up the power cord to the Audigy 2 card, and I can not find it. Is there anyplace I can get a replacement cord at? I have several brand new cord's that has Molex (power supply type end to hard dri've and cd dri'ves) on one end, and a smaller 4 pin's on the other that fit's onto the power port on the Audigy 2, is that the same type of cord or would that work? Thanks!

any FDD type power plug should work

Similar Messages

Audigy 2 Platinum EX Power Cable? Where To B

Where can I buy a Audigy 2 Platinum EX Power Cable? I tried to use a splittler last night (4 pin) and it seemed to fry my memory or memory controller somehow =P? So I need to purchase a cable that will actually work lol. Thanks!

any FDD type power plug should work

Batterie/power cord question

I got the new MacBook Pro 17" and got a question about batterie/power cord use.
I always use mine at home and almost never bring it anywhere. So is it best to
keep the power cord in all the time? Or take it out when its fully charge then run
on batteries plug it in again when the batteries almost dead and so on?
Thanks

It would be better to leave the cord in, but only run down the battery all the way about once a month or so. It would be worse to run the battery down multiple times a week.
Try to keep the machine cool, since heat can really kill a battery.
A good essay on keeping battery life long is here.

Power Cord Question

Just had my power cord replaced under warranty (with 2 days to spare!). Basically the cord was to the point that it would rotate 180 degrees by the time that I took it in. It took forever to charge and you would have to plug it in *just so* to get it finally start to charge.
The location of the cord is problematic- I would sometimes turn the cord so it strung upward (across the back of the laptop) so it wouldn't cover the USB ports when I'm using them.
So my question is, can the cord be plugged in facing either way, or is it possible that this is the reason the cord broke originally?

So to clarify, they are meant to run around the back (ie strung behind the laptop around the side with the pretty lighted apple when the laptop is open?
It just got me thinking what direction these cords were made to run so I can put as little stress on the thing as I can.

Moving Abroad - Power cord question

Hi,
I have recently moved to Spain and my lovely iMac arrived shortly after me yesterday.
And to be honest I've just realised that it won't be as simple as just changing the plug to use power outlets here.
What is my best course of action? Is it OK to continue using an adaptor? Or should I look into a new power cord that can be used here? I'm guessing I can remove the cord easily? If so can you point me in the right direction, I've tried looking on the apple store site for Spain but I can't find anything.
Muchas Gracias :0)

Modern Mac computers are equiped to handle a range of voltages, 100-240 v, and a range of frequencies, 50-60 Hz. All that is necessary is to be able to either use an adapter for the US plug for the European/other country socket, or replace the power cord. If staying for a period of time, the most elegant approach is to buy a new power cord with the correct plug. If your iMac has a detachable cord, try an Apple store and see if they have a cord they will sell you. The Apple retail stores can be found by going to the Store item in the upper bar on this page, or a specific product and then Locate Retail Store.
There is a store in Barcelona and a store in Madrid.
Hope this helps, and enjoy your stay in Spain.
Ralph
Message was edited by: Ralph Landry1

AUDIGY 2 PLATINUM REMOTE CONTROL SSOFTWARE QUESTION.......

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

Giving 60 gig iPod to someone. Power cord question.

Hey,
I have a 60 gig ipod that I am giving away to someone. Does anyone know if this will work for it? http://store.apple.com/us/product/MB352LL/B?fnode=MTY1NDA4NA&mco=MTY1OTg1Nw
Also, is this http://store.apple.com/us/product/MA591G/A?fnode=MTY1NDA0OQ&mco=MzE3MDIxMg included in the previous link?
Right now the person I am giving it to, they dont have any Apple devices. It would be their first iPod and want to make sure I am giving them everything they need.

Yes and No. You'll have to buy both of them.

I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on. I have to unplug the power cord for 10 secs and replug for it to turn on. Kindly pls advise

I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on. I have to unplug the power cord for 10 secs and replug for it to turn on. Kindly pls advise
Anyone having the same problem?

Makes no difference if anyone is having the same problem. The important thing is that it's happening to YOU!
You have 14 days to return the computer w/no questions asked.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Pls let me know cisco 2960X family switches in india which power cords is compatible?16A or 10A

pls let me know cisco 2960X family switches in india which power cords is compatible?16A or 10A

This is the compatible power card in india
CAB-IND-10A
10A Power cable for India
Regards
Irfan

Power Cord slightly Broken...Replacement Question/Ideas

Hello again everyone...
I have a question about the power cord on my 17" Powerbook G4.
I went to charge it up yesterday and the cord, while still attatched to the plug-in, is really only hanging on by wires.
I unplugged it from the computer and am still thinking about getting a replacement, even tho the Apple adaptor through the store is very low rated. I kinda don't want to buy a third party one but will if i have to.
I guess I am wondering if the power adaptor to my 2001 15" Powerbook Aluminum G4 would work on this here laptop.
I have the power cord with the round wrap around and I have two for my non-functioning second laptop.
Any help would be greatly appreciated.

Yep. Getting this error message again, looks like I have to get my 3rd cable. The cord becomes twisted, the connection at the very end bulges out (see below of my cable)
My first cable (connected to my Mac) was giving me the following error "Because a USB was drawing too much power..." I thought the issue was my new phone or my Mac - this was back in mid October, but figured out the cable broke.
Simply put - These Lightning cables are flawed, I personally never had this issue with older 30 Pin connections.

Power cord for Mac Book question...need some help

Hi...my Mom gave my niece her MacBook but kept the power cord. I bought one on eBay for her and it was a 60W MagSafe cord. She seems to be having power issues where it goes into rest mode while working on it and then takes a day or so to recover. Apple store checked it clean and installed Snow Leapord. Is it possible that she needs an 80W cable..I am not sure of the power requirements. Thanks

Have you tried a known-good Apple adapter with the machine?
I'd replace the adapter with one from Apple and see if the troubles persist.
~Lyss

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

MSI-6585 (648 MAX) instant restart issues questions pls help......

Hi, i figured after months of specualation i would try to figure out what the hell is wrong with my pc. 12months ago a bought a MS-6585 648 MAX mobo and a P4 2.53ghz with 2x Samsung DDR 333 (PC2700) ram. I play many games on my pc it seems when playing Counter-Strike + PlanetSide results in random instant restarts. Occasionaly it will just hang the system but mainly instant reset of the system. My cpu temp ranges from 35 48 max approx.
I've tried switching my ram to different slots and so on refit everything but with no luck. I just have a very unreliable computer atm. I've reformated plenty of times but with no joy, the odd thing is its random somtimes my pc will not crash or reset it self so this makes it very difficult to figure out what the hell is going on :S
If you have more questions perhaps i can answer them - and give you more info that i have forgotten.
Here are somethings that might be useful:
MS-6585 648 MAX mobo
Pentium 4 (northwood) 2,53ghz 533
Samsung DDR 333 (PC2700)
Gigabyte Maya II Radeon 9700Pro (running in agp 8x)
Sound Blaster Audigy 2 Platinum
Bios settings: (things ive changed)
Turned onboard sound off than auto
AGP Apeture size 128
I have 32bit transfer mode running for hdds
I have S.M.A.R.T. enabled
(next week end i will have another 512 ram stick to try just incase its my ram but i have done the intel ram checker and it didn't find any problems)
Any help would be greatly appreciated pls ask any things ive missed and anything else u would need to know. I really want to sort this out as you can imagine its not very nice having a pc that can randomly crash when u do not expect it.

Overclocking is typically limited by one of 3 factors, assuming you have sufficient power:
1. Memory won't operate past a certain speed, so you run at a different ratio or buy faster memory.
2. Temperature, so you need to add non-stock cooling or better case ventilation or water cooling, depending on how far you want to go
3. CPU - At some point the CPU won't run any faster.
Leave the CPU voltage at Auto. You should only need to raise it if you get into extreme overclocking.
As for the size of the power supply, if you stay with Intel Northwood with an ATX board on your next upgrade, an Enermax 465, Antec 480, or something similar (should cost around $80-100US) would get good choices. If you plan on going with a Prescott on an ATX board, I would look at going to a 550W supply.
Personally, I thing the next 12 months is shaping up to be a real headache in making upgrade decisions in the Intel world. Intel have indicated their next generation of boards will be BTX without AGP support. This looks like an upgrade could mean new case, possibly power supply, video card and possibly ram. I am hoping that companies like MSI will produce a transitional product that allows new processors and chip sets on an atx board. If that doesn't happen I see a lot of people switching to AMD.

Audigy 2ZS Platinum Pro - breakout box not work

I have an an external external breakoput box which was working fine in my old computer. I upgraded the mother board and cpu and installed the Audigy as before. The actual card works but the break out box doesn't light up. If I plug the external box firewire cable in to another firewire port on the computer the power LED lights but that's all. Any ideas anyone?

I am sorry to bump this topic but it is the same as my question and does not seem to have been answered.
I have a Audigy 2ZS Platinum Pro - my old one which I decided to use in lieu of the on-board sound. I installed the latest drivers I could find SBAX_PCDRV_LB_2_18_0017.exe (after unistalling the existing ones)
The card itself works fine but the external interface box is as dead as a doornail. The power for the interface is supposed to come from the two connectors.
No lights no nothing - obviously I have checked the leads and the seating of the card itself. Playback is fine on MP3, midi, wave files etc. I have disabled the on-board sound in the BIOS of course.
Unfortunately the jacks on the back of the card are 1/8 in. outputs only and the external interface provides the inputs which I need for recording etc. They are 1/4in proper ones - guitar lead size which are much better.
I know it is an old card but I like it. The last time I used in in my old computer it was fine. Card/drivers show up in the device manager. I have installed this both on a Win 7 partition and a Win XP partition on my 2 HDDs with the same result. :mansad:
<font color="#0000FF">Any ideas appreciated! Is there something I am doing wrong? Thanks.

Audigy 2 platinum faceplate issue

!audigy 2 platinum faceplate issue: im sorry if there has been a similar question before, i have been search for 2 or 3 hours for a solution to my problem to no avail. this problem has been going on for months i just haven't had time to look into it. i have the audigy 2 platinum model number sb0240/sb0250, and my faceplate essems to have no power, the optical ports have no light inside, i've checked my cables multiple times, tried reinstalling drivers(could not find a driver for my specific model and didn't recieve a disk with my computer), looking for broken on damaged conections on the boards, and have had no luck. it also seems as though the ports don't show up in the volume controls. is there redemtion for my face plate or should i start shopping for a replacement, and is there a way to just buy the faceplate(funds are kind of low this month)

? I guess Creative doesn't care about living up to the promise that their product is upgradeable as new technologies emerge such as VISTA. They were give plenty of warning, that it was coming out, and it has been out for some time. I guess the $700AUS I spent is down the tubes, because the lazy people at creative cannot be bothered to bring it into compatibility - AS PROMISED with "peace of mind" they said. There is no way that I will acti'vely tell people how good creative is any more. In fact I will be acti've in just the opposite.
Get of your backsides and support AS PROMISED, we deserve it, instead of giving us second rate partial compatibilities. I have wasted the best part of a week trying to get it all sorted, where do I send the bill for my time? Hvae I got sour grapes? No, I just expect decent support as promised.
I issue the challenge - ?Provide decent support and I will retract. Fair is fair. I PROMISE.

Audigy 2 Platinum EX Power Cord Question, pls he

Similar Messages

Maybe you are looking for