Audigy 2 Platinum Pro stutters when decoding from AC3 via ffds

hi all
i am playing a movie with ac3 soundtrack on it.
My Configuration:
Audigy 2 Platinum Pro->AudioHQ->Hardwarecontrol (ger?testeuerung in German)->->Digital Input->Dolby Digital/SPDIF-In-Decoding
->Decoder->use installed Decoder->all settings enabled for Digital EX and DTS ES.
ffdshow->AC3 passthrough to SPDIF and DTS passthrough to SPDIF
I have 6. Analog Speakers connected. (Creative Set)
Problem: Audio stutters like hell !!
Since i also have HTPC (HomeCinema PC) configured with a external decoder, i know the file is ok, and its with all files. on my HTPC i have AC3 Passthrough (SPDIF passthrough if you like) and the decoder (Denon AVR) shows Digital In detected and decodes properly.
Well know to my PCs configuraton where the Audigy should make the decoding. As i play the file, regardless what programm (VLC, Media Player/Classic, InterVideo WinDVD) it shows me the Dolby Digital icon in the lower right screen as i start the movie, so it realizes the Digtial Audio, but why doesnt it decode it properly??

"problem now is, repack decodes all streams as dolby even if its mp3, and very funny, it only works with normal media player, media player classic has no audio anymore".
repack ? I think you mean reclock. mmmh, your problem sounds like a really bad installation, which creates a complete mess in the filter graphs.
Since I'm one who insists on bulding his architectures around generic softwares only (mediaplayer 6.4 and 0 for example), I'll advise you to first uninstall FFDShow, every codecs and parsers installed, and every players too (except the windows integrated ones ) Allways avoid all-in-one solutions if you want a super-flexible and easy to maintain system.
When you've cleaned your system, you can install the codecs and parsers you need for each format. Be aware to configure each one to decode only its format). Avoid the codec pack which are just good to mess what should be a clean installation. Avoid AC3filter, the ac3 decoder from your installed DVD player will be sufficient if it has a good SPDIF option (powerdvd5 audio decoder for example). You might need in some case an XFormer for your ac3 streams http://inmatrix.osnn.net/ac3xform.exe . And don't forget reclock. That's all.
"well, clearly decoding on the PC is far more complex then running it through a external decoder."
Decoding with the PC is complete piece of cake, that's building a good PC with a good system that is not something everything can do with just instinct
"can i control audio buffer in ffd? (id rather be in control then repack, since repack crashes after every movie...)", I don't know, I decided years ago to avoid all-in-one solutions, and on top of all, FFDShow.
" the audigy doesnt do all the work, which is very astonishing and very disapointing..."
What do you mean ? It uses CPU when decoding ? My ZS do not.

Similar Messages

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

Audigy Platinum Pro does not work for microphone!!! CREATIVE HE

I recently bought the Audigy 2 ZS Platinum Pro mainly for guitar recording. The external unit that i plug my guitar into plays alright through the LINE IN 2 (I find it works better when you don't put a line out to your amp), though not spectacular, but does not play at all through the LINE IN which is designated mainly for a microphone (which i use for acoustic guitars). Even when I try plugging the mic in LINE IN 2 I have to scream to make it just register, and when I do it sounds fuzzy and barely audible. When I first bought it a fortnight ago it seemed to work ok, there appears nothing wrong with my sound blasters and i have tried the recording on a number of different software programs.
The recording dial is cranked and although i don't seem to have the option to use the mic boost which seems strange as it is a powerful computer, the recording level on the sound desktop does not make a difference.
Can anybody help me with this? Is CREATIVE aware that this is common complaint and are avoiding the issue?
Is it something wrong with the hardware or the operating system - Windows XP Home?
If so, should I take the soundcard back? The recording capabilities were the reason i bought this card!

Update.....
Anyway, to resolve this problem (after some discussion direct with Creative Support) I discovered that there is a trick in the Creative Surround Mixer that is not explained (at all) in the documentation, not is it very intuiti've.
In the part of the mixer with all the sliders the box on the left (ie. vol, bass, treble) is the master speaker volume, the box on the right with the single slider is the recording level (the icon above the slider selects the source) and all the sliders between the two boxes control the levels of each source going to the speakers. To ensure a pure recording and prevent any of the input sources going to the speakers you will need to mute any input devices you have connected in this section.
To put it simply, if you don't want your microphone input to go to the speakers mute them in the mixer. Only the single slider in the box on the right hand side of the mixer panel will set recording levels.
Hope this hel
ps.
<IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-happy.gif" width=6 border=0>

Mac Pro restarts when waking from sleep

Hi everyone.
I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
Thanks,
Matthew

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

My mac pro restarts when waking from sleep

Hello everyone pls help me.
I have a annoying problem and that is that my Mac Pro restarts after it has been to sleep.
Last week I updated the system with an update from Apple, safteyupdate 2013-003 version 1.0.
I have swedish OsX 10.6.8.
After this update my mac always restarts after waking from sleep.
So what may have gone wrong?
Pls help me in a simple way, and pls describe in easy steps if I have to do something.

One suggestion is to always have cloned your system ahead of time, that means before making changes or updates, early on when it is fresh and working.
And don't just restart. Use Safe Mode at least, better yet use Recovery Mode if on Lion (which I do recommend) and have a small OS Emergency drive for any maintenance - along with a clone working copy of your system.
Don't just reinstall over your system. Do a fresh install on another drive. Image it and set that for maintenance, then clone that to be a new working base for your system.
Setup Assistant does an amazing job.
Forced restarts can corrupt the filesystem and directory as the changes in memory or cache are not written out and drives are not unmounted properly and will come to bite in the rear.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-clone
http://www.bombich.com/software/updates/ccc-3.5.html
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form

Macbook Pro freezes when disconnected from Internet

I'm so frustrated, I was doing important work and now I'm about to pull my hair out, I need to finish what I was doing but I can't even turn on my computer without it freezing, I literally can't even move the mouse because it freezes right on loading screen every time I restart, here's the story.
I disconnected the Internet for just a few seconds, then the computer froze. So naturally I restarted the computer, but each time I restart, it just freezes, I can't move the mouse, I can't click on anything, it's just frozen. Let me know how frustrating that is that you don't have computer access after working on important files.
I have a 2008 non unibody Macbook pro with OS X mavericks, I knew the computer froze when I turned off wifi, but I correlated that with the app that I was running, since I wasn't running the app this time, I thought I could turn off wifi no problem.
But like I said, now I can't even restart or use it at all. I can't even use safe mode because it freezes there too. I can do the cmd+shift+ctrl+r thing and I can connect to the Internet that way, but there's nothing I can do from there. Once I restart, the Internet connection is still disconnected in the main operating system.

Okay I solved the problem. For anyone who runs across this issue in the future, here is the solution:
Step 1) Turn on the computer and hold CMD + Option + S, this will boot the computer into single user mode
Step 2) Type in "Mount -uw /"
Step 3) Type in "vi /Library/Preferences/SystemConfiguration/preferences.plist"
Step 4) Scroll down until you find this part:
<key>Interface</key>
<dict>
        <key>en1</key>
        <dict>
                <key>AirPort</key>
                <dict>
                        <key>JoinModeFallback</key>
                        <array>
                                <string>DoNothing</string>
                        </array>
                       <key>PowerEnabled</key>
                        <false/>
                        <key>RememberJoinedNetworks</key>
                        <true/>
                        <key>RequireAdminIBSS</key>
                        <false/>
                        <key>RequireAdminNetworkChange</key>
                        <false/>
                        <key>RequireAdminPowerToggle</key>
                        <false/>
                </dict>
        </dict>
</dict>
Step 5: Edit the part where it says:
<key>PowerEnabled</key>
<false/>
and change it to <true/>
Step 6: Hit Ctrl + X, hit Y for Yes, press enter.
Step 7: RESTART AND YOU HAVE YOUR COMPUTER BACK!!
I panicked by the way because as someone said earlier, it's nearly impossible to fix:
You cannot fix this problem with Safe Boot, Repair Permissions, Repair Disk, re-install Mavericks, restore from Time Machine backup, reset the SMC, reset PRAM, or boot into single-user mode. Thus far, the only solution is to boot from a (homemade) Install OS X Mavericks USB, erase the hard drive, perform a clean Mavericks install, re-install your applications, and manually restore your data.
Anyway I'm thankful for Ira Wolf 81 for figuring out, he deserves all the credit for this, I merely repeated his steps and found out he was right. Cheers.

MacBook Pro freezes when returning from sleep

I recently started using a Kensington Bluetooth mouse with my MacBook Pro and the computer freezes whenever I return the computer from sleep. Nothing happens when I press Command-Option-Esc. The mouse pointer moves on the screen and the dock magnification works, but I'm not able to open any programs.
I've confirmed that it has something to do with Bluetooth because I now turn off Bluetooth before returning it to sleep and it works fine. I just have to turn on Bluetooth using the trackpad and then I can use the mouse again. I'm thinking that this shouldn't be a requirement though.
Has anyone else had this problem? Is there anything I can do to resolve?
I appreciate any assistance!
Thank you,
Chris
Mouse: Kensington PilotMouse Mini Bluetooth
Bluetooth Version: 3.1965 (3.1965)

For those of you who are interested, I think I've isolated the issue. If I turn off the option to allow Bluetooth devices to wake the computer from sleep, my computer doesn't freeze when I return from sleep. This is a better option for me than turning off Bluetooth before I put the computer to sleep.
Let me know if you have any questions.

IMovie 13 - initial frames stuttering when played from a DVD

I've edited a short movie (my first) on iMovie 13 and saved it to file and thereafter burned it to a Verbatim 4.7 DVD+RW disc. The movie operates fine when played on QuickTime but stutters for the first 30 seconds or so when played on my TV via a DVD player. Anyone got any ideas as to what might cause this and suggestions as to how to fix it please?

Hi
Most common origin to this are:
Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
Material used - Video Codec, Photo and Audio file formats
Video-Codec: StreamingDV, AIC and HDV (I use)
Photo: .jpg - NO .bmp or other - all converted to .jpg first
Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
Yours Bengt W

Macbook Pro beeping when waking from sleep

I have just upgraded from Lion to Moutain Lion. Before upgrading I did all the usual disk check and stuff. But currently when my computer wakes up from sleep there is a loud beeping and black screen, I have to force shut down to use the notebook. This have happen twice. Once yesterday morning and today evening. I installed Moutain Lion on 2 Aug.
- Yesterday Morning
Went out left the computer on to download stuff, my notebook is always set to sleep after 1hr after I came back turn on the computer there is loud beeping had to force shut down.
Search the internet found it could be a corrupt sleep image file or ram problem. I did a memory test no problems. Therefore I accepted that it could be a once off corrupted sleep image file as I was not at home when the computer went to sleep.
After I rebooted there is this message that the computer recovered from a system problem.
- Today Evening
Went out decided to use Deep Sleep a dashboard widget for hibernation after I came back home the computer was running and there is the lound beeping. The computer was hot so it have turn on for sometime.
There is no message that the computer recovered from a system problem this time.
But there is this existing issue even with Lion. The computer will sometimes wakeup from its sleep. I have tried clicking sleep from the menu bar and the dashboard widget both have the same problem. I tried tweaking the sleep setting after searching for this issue online. But after sometime the problem returns.
But there is no loud beeping. Just a hot computer running since the lid was close. So the problem was not an issue at first.
I have also notice before upgrading to moutain lion when I was next to the notebook and while it is still sleeping it will sometimes make the usual noise when starting up or booting from sleep. But when I open the lid it is still asleep. I think the noise is from the dvd drive not too sure.
So the issue occured before upgrading and got worst after upgrading. What should I do? I have tried looking at console but don't seem to find a clue what log file shoud I be checking?

Ok I have send a request for a call back request. Hopefully I can speak to someone with a technical background and not ask me to go through a series of standard steps.
The notebook is running great no problems or issues. No kernal panic or problems booting. No traces in the log file of what went wrong. Previously in lion when the computer wakes up from sleep I could check the cause in console but as the computer now goes into beeping when waking up in moutain lion there is no traces at all.

HELP: Mac Pro restarts when waking from sleep

the problem just started a few days ago. i hadn't made any mods or installed any new software. all firmware is current.
i've reset the NVRAM and SMC with no results.
any suggestions?

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

MacBook Pro freezes when waking from deep sleep

When I plug in my Mac to charge overnight and go to unplug it in the morning, it will make the sound it does with the CD drive and then it acts like it's coming on. the first time I use it after I've unplugged it, the screen will come on like normal and show the login screen, when it does I can't move the mouse or type my password in for a minute or two. after about 20 seconds, the screen turns off...however I can turn it back on by clicking the power button but most of the time it still won't let me enter my password or move the mouse around. I'm not sure what the problem is. but it's only been doing this since I've updated to Yosemite.

Try turning off "Allow Bluetooth devices to wake this computer" under the advanced section of the Bluetooth System Preferences. Hope this helps.

Lost messages when pulling from MQ via bridge

Hi all,
          I'm using a bridge to pull messages from MQ, sort them, and republish them into one of several outbound topics. I've received word from a consumer application that they aren't seeing all the messages they expect. Sure enough, they're not in my log, either (they should be.) It's infrequent (< 1%) and doesn't appear to be load-related. I'd like some feedback on what can cause this. I can't verify that I've even received the messages, though the backend producer says it sent them. I see no error messages in any logs.
          My config is to use a bridge to connect a foreign jms queue to a local queue. The messages, queues, and topics are marked as persistent. My downstream consumers have durable subscriptions. The MQ host is v6.0 in Windows 2003 Server. I'm using the lastest fixpack of the 5.3 jms libs from IBM. My WLS is 8.1 sp4 on Red Hat Enterprise 2.4.x and JRockit 1.4.2_08. I see we've set no expiration policy. I'll change that. We typically don't fall behind in consuming messages.
          thanks

Well, when I re-opened mail it began downloading 3100 e-mails, so it looks like I solved it.

Error when purchasing from store via iTunes

Hi
I am unable to purchase anything from the store as I keep getting the following message when I press purchase & login with my Apple ID :-
"We could not complete your iTunes Store request. An unknown error occurred (2001).
There was an error in the iTunes Store. Please try again later"
The only option is to press ok & it goes no further. I know the ID works, as I've logged in here for this forum.
Any clues ? Am I an idiot & am missing out something ?

I have the exact same problem. It started last week when I upgraded to iTunes v9. I can't purchase any music. I get the same error message. I even tried the suggestion to log on first and then try to purchase. Same problem existed.
I contacted Apple via email and they had me completely uninstall v9 and reinstall from a fresh download. I did all that and I have the same problem. In addition, I now also have a problem in that some of the songs in my music are corrupted or don't start playing at the beginning of the song. I guess the real lesson is to never, ever upgrade iTunes.

Error "Can't find boot device by boot options" when boot from ISO via AMT

Hello.
When I try to boot from ISO CD via AMT I got an error message:
"Can't find boot device by boot options"
Settings are similar to what I made in HP 8100, 8200 etc - SOL/IDER/KVM, network access enabled
Where could be a problem?
Prod. name: HP Compaq Elite 8300 Microtower PC
Prod. number: B0F41EA

Just wanted to follow up with this as I got a response from HP. It looks like it is at least the 2.9 BIOS version that has this issue. I know that at least the 2.51 BIOS version is unaffected.

HELP! Hey, (Yeah YOU!) I need some HELP with an OEM Audigy 2 ZS Platinum Pro SB0360 installat

Hi Everyone.
I'm new here so I'll try to be kind and make lots of helpful friends, especially folks at CL.
Do you like a challenge?
Try this on for size.
My problem.
I'm working on a PC for a doctor friend. It's a Gateway P4 dual 3.0 gHz "Media Center" unit.
He let the antivirus proggie lapse and it was full of spybots, trojans and some missing stuff his kids (he says) had done (little kids like to click on stuff and he has 4 kids under 6 years old...).
Anyway, I needed to re-install the whole system back to the original state. GW2K docs seemed to make that a piece of cake.
Everything went well until the turkeys at GW2K threw me a curve - their CD re-install system just stinks. The CDs don't seem to AUTOSTART very well, the OS looks different than original (fo example - just plain ole XP Home instead of the neat-looking "Media Center" branding on the startup splash page), and then I got to a real problem.
The SB0360 Audigy 2 ZS (Platinum Pro, I think) driver from GW2K installed OK, but the associated apps CD keeps spitting back that it doesn't find a "Sound Blaster" card.
The Device Manager says its a Creative SB Audigy 2 ZS.
I've tried to use updates from CL but they also spit at me - "No Sound Blaster found, Exiting".
It seems that the Plug and Play only likes the GW2K driver, but the Apps CD don't like the "Creative" part, and so it balks. The CL drivers give the same message.
GW2K tells me to contact Creative Labs or (haaaa) SAM'S, the purchasing store.
Talk about the royal runaround...
Anyway, anyone got any good ideas?
I can't seem to find anything on the net to help.
I'm about Google-ed out.
Thanks in advance!
P.S.
I do have sound, Music CDs play fine and Windows sounds work OK.
I just need to install those Audigy Apps from the GW2K CD...
Message Edited by GrimWeeper on 2-02-2004 03:0 AM

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Audigy 2 Platinum Pro stutters when decoding from AC3 via ffds

Similar Messages

Maybe you are looking for