AUDIGY 2 PLATINUM REMOTE CONTROL SSOFTWARE QUESTION.......

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

Similar Messages

SB Audigy 2 Platinum Remote Control Problem, Need THis Resolved quic

Hi
this is a Known issue to Symantec Support, I really really want to be able to use my Audigy 2 Remote Control with this Soundcard, but I can't, until Symantec or YOUR SLOW AS MOLASSES COMPANY UPDATES MEDIASOURCE SOFTWARE SO THESE 2 PROGRAMS DON"T CONFLICT, WITH REMOTE CENTER LOADING ON STARTUP, IT WILL NOT LOAD AUTOPROTECT FOR NORTON ANTIVIRUS 2005
FIX THIS, and quickly, is all I have to say
Or let use SB Audigy 2 Platinum Users download the newest versions of the software
Message Edited by bikeman on 0-22-2004 03:34 AM

Hi
I don't have that file on startup--SBDrvdet, All I have is Creative DVD Audio Driver Detector, CTHelper, and RCman, which is disabled so Norton's Autoprotect will work ok.
Thanks for the reply though
Here is Symantecs workaround, I guess I can li've with these, but if Norton's Autoprotect winds up disabling by this workaround, and I happen to get a trojan or virus in..then I won't be very happy
To stop Creative MediaSource Go! from running when the computer starts
On the Windows taskbar, click Start >Programs >Creative >Creative MediaSource Go!, and then click Creative MediaSource Go!</LI>
Right-click anywhere on Creative MediaSource Go!</LI>
In the new window that appears, click Close. This prevents the program from loading when the computer starts.</LI>
Do one of the following:
If you also have Creative RemoteCenter, then go on to "To stop Creative RemoteCenter from running when the computer starts."</LI>
If you do not have Creative RemoteCenter, then restart the computer and go to the next step.</LI>
</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable Creative MediaSource Go!</LI>
To stop Creative RemoteCenter from running when the computer starts
Do one of the following:
In Windows XP, on the taskbar, click Start >Control Panel >Remote Control Center.</LI>
In Windows 2000, on the taskbar, click Start >Settings >Control Panel >Remote Control Center.</LI>
</LI>
Uncheck Enable RemoteCenter.</LI>
Uncheck Show RemoteCenter icon on taskbar.</LI>
Uncheck Show RemoteCenter splash screen when RemoteCenter is started.</LI>
Restart the computer.</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable RemoteCenter. To re-enable RemoteCenter, repeat steps through 5, this time checking each entry.You must repeat these steps whenever you start the computer.</LI>
After Disabling Creative DVD Audio Detector, I reenabled the Remote Control and restarted, and so far so good last 2 days without a conflict With Norton Antivirus, if it really does solve the problem, I will email Symantec Support and let them know the solution, so they can inform other users with the same problem, since obviously creative doesn't want to assist them in finding the problem or provide help fixing it. So far Remote Control hasn't been an issue, but I'm gonna wait til end of month to send off an email to Symantec to make sure it's actually fixed. Since if it doesn't drop out of me by then, then I know it's fixed, since was only in 2 weeks before it got the internal program error before.
Message Edited by bikeman on 0-25-200404:47 AM
Message Edited by bikeman on 0-25-2004 04:47 AM
Message Edited by bikeman on 0-29-2004 04:08 AM

Audigy Zs Platinum Remote Control Driver For windows Vist

Anybody knows when will this come out', i can't use my remote.

I miss my audigy 2 platinum remote too...... I wonder if it will control windows media center

Audigy 2 ZS Platinum - Remote Control not work

hello all.. Sorry for beating a dead horse. My installation on a P4 3.0 ghz machine of the Audigy 2 was flawless. All hardware diagnostics that have been run have been successful. Everything works. I updated all drivers. Everything is functional on the unit.....but...the remote control doesn't work.
When I got to setup the remote control and it asks to select a transmitter (rm-500) from a drop down list, it shows rm-500. but it the drop down list for the receiver is BLANK? I've tried several suggestions from the forum but it still doesn't work.
Have I missed something or is it quite possibly just a dud unit that I have to take back.
thanks for all suggestions and ideas...
sony

OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
Hope it's not a long dri've.:smileyvery-happy:
Richard
Message Edited by sf3454 on 03-3-2005 03:28 AM

Audigy 4 remote control prob

just recently switched pcs and i have lost my driver disc for my audigy 4 soundcard. i downloaded the driver off the creative site, but i can't get the remote control to work. anyone know of where i can get the drivers?

Suggest you try this: http://melloware.com/products/intelliremote/
Great little app, enables Creative remotes without needing the Creative drivers, and also works way better than Creative's junk remote software. It's shareware, but well worth the donation IMHO.

Live! 5.1 Platinum remote control *Just wont wo

I have win XP, all the latest drivers i can find, the bay is properly connected to the soundcard, the dri've is recieving power, the remotecentre program is running, the remote has batteries, the grass is green. Why isn't it working?!!!

yep, did all those things. finally got it workin tho, took a soldering iron to it and replaced what seemed to be a broken IR receiver. Screw the warranty, if I need to I'll just fix it again myself. but thanks anyway man

I don't know how to USE my remote control on my AUDIGY 2 ZS Platinum

I followed the instructions on this page: http://support.creative.com/kb/showa....aspx?sid=2965
about activating my remote control for my AUDIGY 2 ZS Platinum but mediasource did not have a remote control option tab as you can see here...
Untitled.jpg
I just changed the battery on my remote and the receiver blinks when I press a button on the remote but nothing happen no volume change or nothing.
Don't know what else I should do.

You can import the contacts from SIM.
It is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

AUDIGY 2 ZS x REMOTE CONTROL

Hi all.
A simple question: Is it possible to mak an AUDIGY 2 ZS? work with? the remote control and USB receiver that cames with
Sound Blaster Audigy 4. Thank you

OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
Hope it's not a long dri've.:smileyvery-happy:
Richard
Message Edited by sf3454 on 03-3-2005 03:28 AM

Soundblaster Audigy 2 ZS Platinum Remote prob

I have had this problem ever since I bought the Audigy 2 ZS Platinum.
My creative remote works fine but the External I/O Module accepts any sigal from any of my other remote controls. So if I want to change anything else in the room like the tvchannel or increas volume on the amplifier, the audigy thinks that i want to change someting like mute och start mediasource player.
At first i thought this was normal but now I cant find anyone else with the same problem.
Everything works fine except for the remote problem. Is this enough to get a new Audigy 2 ZS Platinum?

JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

Audigy Sound Blaster and Remotely controlled speake

I own Sound Blaster Audigy card and I would like to purchase set of Dolby surround speakers that would work flawlessly with that card. I am thinking to buy Creative speakers since they also make this card, but I need a set that could be remotely controlled, either through wire or wirelessly. Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled? Any suggestions? I wrote an email with my question to Creative sales, but nobody responded yet.
Thank you,

If it is the very first Audigy model (Audigy ) then it a 5. soundcard. So any 5. speaker system or below would work nati'vely with your soundcard. If you choose a 6. or 7. system they usually have an upmix function to make 5. sounds play over all satellites.
Also, most speaker sets (regardless of manufacturer) uses some kind of remote control (either through cable or IR).
Your question is extremely hard to answer if you are looking for tips on which speaker set to buy, but easy to answer if we take the question "Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled?" at face value as everyone with any kind of speakers should have some kind of control pod or IR remote control to their speakers.
Edit: I will try to answer your question: you can choose whatever speaker set you want as I think it is safe to say they all got either a cable remote control or an IR remote. The question then becomes what exactly you are looking for and in what price range.
Message Edited by rico0 on 07-23-2005 08:43 PM

SB Audigy 2 zs Platinum Remot

Is it posible to cofigure the remote to Windows Media Player? and Cool Edit Pro?

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

Sound blaster Audigy Remote Control / Remote Center in Windows 7

@Hey Folks,
I have an Audigy Platinum with a remote control and version .46 of the Remote Center software.
Remote center has extremely limited functioning under windows 7 - I can eject the CD player, turn on/off clock
display, everything else either displays N/A in the overlay or gets no response (hitting the remote 'start' button for instance).
Is there a newer version of Remote Center that may have more functionality in Windows 7? I know of commercial software but I'd prefer a solution via creative labs or free and open source software if available. I have searched for newer versions of Remote Center but seem to be stuck with the version that came on my CD. Any suggestions?
thanks,
jd

zac,You need to get the Vista apps for your X-fi. Either pull the ISO files off torrent or one of the other sites or pay the $7.00 shipping fee for the CD from Creative. Install the entertainment center off the CD and you'll have remote control functionality. Steve

Audigy 2 ZS Remote control (RM-1500) and DVD-player. (Need he

I've got Audigy 2 ZS platinum with remote RM-500, but software included in package allows to play only DVD-audio. Creative recomend to install InterVideo DVD 5 to play video DVD with Creative Audio-DVD program.
I've got InterVideo DVD 6 Platinum, but it doesn't controlled by RM-500 (there is no problems with my logitech Cordless keyboard with media buttons). As I found out there is differens in buttons menu: Creative use Enter for play, Spase bar for Pause, ect., but standart windows programs use Ctr+P and Ctr+Shift+P.
Does Creative have patch that solve this problem. To have remote that cann't contol DVD player (exept Audio DVD) is useless stuff.

Skeleton,
Have you added the DVD player software to the external applications listing under the remote control tab in MediaSource settings. The controls on the remote are mapped to the keys as defined by Microsoft. If the program is compliant to this then it should work.
Jeremy

Questions about remote control and infrared port Qosmio F20

Hi again,
My Toshiba Qosmio F20 comes with a remote control funcioning through a infrared device on the front of the computer.
Regarding this I have 2 questions:
1. How do I configure additonal functionality through the remote control? (Like launching and controlling Winamp?)
2. How do I connect other devices, like my cellular phone, pdas etc., to the infrared device on my computer?
Kind regards,
Vegard

Hi,
the Remote Control delivered with the Qosmio F20 is designed only for Windows XP Media Center Edition (all Remote Control's which are designed for Windows XP Media Center Edition work only with Media Center or Windows Media Player). Other program's like Winamp were not supported by these Remote Control's.
I believe, the Remote Control's are made by Microsoft and for a wide palette of product's (the Infrared Transceiver is on nearly all Media Center PC's e.g. Siemens-Fujitsu, the same). So it's a little bit tricky to support more program's then Media Center or Windows Media Player.
For other program's you need a second Remote Control like this one:
http://www.logitech.com/index.cfm/products/detailsharmony/GB/EN,CRID=2084,CONTENTID=9193
br, Ben

Design question ... Remote control and keyboard

Hey i am building a system that should support remote control input and keyboard input
the system is a addons based any user could build any addon he wishes
i have now two main input events types
KeyEventand
RemoteControlEventi wish to use only one type of event
i am thinking of 2 options.
1) Map
RemteControlEventto
KeyEventif this why is the best what happens i a situation that i mapped J key to the RECORD button
how a specific addon should know that a RECORD operation is pressed or it's just a J button
2) Write a new events that contains
KeyEventactions and
RemteControlEventactions
thanks allot

thanks for your replay
i am sharing my thoughts with you ,cause i relay want to do it the best way.
when i mention remote control i meant using a TV/VCR/MCE Remote Control.
(i am usingJLIRC ( LIRC ) )
and i have decided .
i will listen to all keyboard event using "dispatchKeyEvent"
and will map Remote control keys to keyboard keys
here is another question to make sure i understand fully .
the application that i am writing is an add-on based
every programmer that will like to create an add-on
will extend the "Screen" object for is main panel (Screen exnteds JPanel)
so i was thinking when dispatchKeyEvent called i should call dispatchKeyEvent in the current displayed screen
(if the screen dispatchKeyEvent returns false.
the main dispatchKeyEvent should continue.
case true the main dispatchKeyEvent will return true)
then in the screen implementation the user can ask if this key is an Spacial Key
if yes he can get the spacial key attached to this keyboard key
i just wrote an example of how it's suppose to be
public MP3PLayer implemants Screen {
public boolean dispatchKeyEvent(KeyEvent e){
    boolean isSpeacial = RemoteComtrolKey.getInstance().isSpeacialKey(e.getKeyCode);
    if(isSpeacial){
        int mappedKey = RemoteComtrolKey.getInstance().getSpeacialKey(e.getKeycode());
        if(mappedKey == RemoteComtrolKey.REC){
          //do the record
           return true;
    return false;
}georgemc thank you very much

AUDIGY 2 PLATINUM REMOTE CONTROL SSOFTWARE QUESTION.......

Similar Messages

Maybe you are looking for