Audigy 2 problems with mic headset and Teamsp

What settings and what are they under do I have to change to make Teamspeak work properly with my Logitech Precision PC Gaming Headset and City of Heroes? Everyone wants me to leave Teamspeak because when I go into the channel it creates this massi've noise. Or, when I played with settings to try to fix it they can barely hear me. Everyone was trying to help me with my settings but we were getting no where. I have a Soundblaster Audigy 2 and the latest drivers and programs from SB installed. What needs to be muted, not muted, what needs to selected for mic settings and not. PLEASE HELP! :-)
Terry

I have a Dell XPS Gen 2. I was using the mic/headphone jacks in the front of the computer. When I switched the mic/headphone to the back of the computer in the soundcard, everyone heard me fine. Go into both your Creative Labs Surround Mixer control panel and make sure you have your mic selected on Record to Mic. I have the following muted in there with the X: Midi Synth, CD Audio, CD-Digitial, and ALSO Microphone. Keep Line-In and Wave umuted. In your XP Sound control panel, the same thing. Also go into advanced Mic settings there and make sure the DB boost is checked. In TS under Settings/Options/Sound Devices I have it set to Wave and then both SB Audigy is selected for input/output. Settings/Options/Sound Input/Output Settings I have Push To Talk selected. I'm sure now that I have it working I can play with it some more to get Voice Activation tweaked to work well, but I'm happy that they can hear me without a giant helicopter sound coming through anymore. :-) Let em know how it goes.
Terry

Similar Messages

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • Problems with logitech headset

    Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

    Hi,
    As it has been so long I reread the topic.
    I am now confused though.
    In the first post you said
    ... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
    From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
    You then said it was the Output (incoming Audio) that you could not hear.
    I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
    You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
    I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
    Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
    Ideally iChat seems to prefer 44100
    You may also notice here that you have different controls over the volume.
    Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
    8:52 PM Tuesday; June 22, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)

  • C2-00 Problem with Bluetooth headset

    I use it for a week and have a problem with bluetooth headset.
    When I finish a call my mobile is stop working.
    The only way to get it back is remove a battery.
    I try to use other bluetooth headset but it have the same problem.
    Please help me to fix this problem.
    Thank you.

    conceivably, yes, that is how its supposed to work
    i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
    thanks,
    vasilis

  • I am having problem with mic on i pad

    hi
    i found out that i am having problem with mic on my ipad 2 16 gb  wi fi model. i tried apps like skype, yahoo messenger. i am unable to hear my voice in skype test call. can you let me know how to fix this issue as i use my i pad for skype calls
    Many Thanks,
    Raju Pusapati

    Hi Sandhya,
    Don't get disheartened  or discourged by the post of so called good for nothing mr srini.
    Do one thing give a clear picture of your requirement and we will try to give a solution for the same.
    Regards
    Abhinab Mishra

  • Problems with 1.5 and vista - audio recording

    Hello.  I have PP 1.5.  I have an Audio Techinca AT2020USB microphone.  I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio.  On the computer that runs Vista, I can not.  Is anyone aware of any patch or anything that will allow me to make this work?
    Please, advise.  Thank you.
    bobhugejunk

    YOU ARE THE MAN!!!!  It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
    Thank you!
    Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
    Date: Wed, 21 Oct 2009 19:34:20 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problems with 1.5 and vista - audio recording
    As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
    Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
    Good luck,
    Hunt
    >

  • Blackberry 8220 Flip Black problems with Bluetooth headsets/caller cannot hear me

    Problems with 3 headsets. Eralier it was working fine. but now I can hear the caller but the caller cannot hear me or anything from my side over the bluetooth headset. Otherwise without the headset the phone and the speakerphone work just fine. Any ideas????

    I am experiencing the same problem, started about 10 days ago. To date, I have reset network settings, and have restored to default without success.
    The weird thing with my issue I've noticed, after I go through a half dozen attempts at calling and recalling the person back, eventually, the problem goes away and the caller can hear me without issue after that. But then that may just be the 50% of the time occurrence.
    So, I wonder if this is signal related, although it has occurred in 3 different locations in the US. Or if there is some restricted, or privacy policy that is related to AT&T regarding my account when calling. Kind of like being on a no fly list?
    However, I can't continue with this happening, everyone says I am give Steve Jobs a bad name, so its to the genius bar or whatever they call it these days, I am heading.

  • Problems with mic on iphone4

    problem with mic on iphone4 had new mic fitted and still have this problem fonemenders wanted 200.00 euro to fix problem yet there seems to be alot of problems with this model off phone.

    Take it  to Apple Store if out of warranty you can buy a refurb exchange for less than 200 euros ( £136 in UK) if Apple can see problem and agree it is hardware
    fault

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Problems with the richTextEditor and quotes

    Hello
    I'm having problems with quote chars and the richText
    control's htmlText. When users enter quotes into the richTextEditor
    control. The quotes breaks the HTML text, meaning it's no longer
    well formatted. Is there an escape char that I need to use. Or do I
    need to force some kind of refresh on the control prior to using
    the htmlText string?

    I have been using RTE in a content management system and
    found a need to replace non-standard quote characters with proper
    UTF-8 character counterparts. Curly quotes in particular are
    problematic. Use a replace function to substitute non-standard for
    standard characters.

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

Maybe you are looking for