Audigy 2 Value Install on Vista... Is it POSSIB

Ok, the Vista drivers that are supposedly for this card, do not detect it. The ONLY way I was able to install drivers for this on Vista was to use the original CD that came with the card. I had to use the XP drivers... OK, fine and dandy. Now, I'm stuck without any software for the card, because the ones on the CD won't work with Vista, and the Vista download will not install either for whatever reason. What gives with this card?

Make sure you download updates for "Audigy 2 Value", not "Audigy 2"; also you will probably need the original installation CD since they're updates.

Similar Messages

Audigy 2 Value with Windows Vista 32-

I have a situation where I have the beta driver working for my Audigy 2 Value but Windows does not give me a choice to select a 7. setup. It only allows a mono and 2 channel setup. With the Creative program that came with the driver I was able to select 4., but that leaves 3 of my speakers in my 7. setup useless! Is there any program I can use to configure 7. with Vista, just like how Media Source had?

The DAV-BC50 appears to have only stereo analog input ( pair of L/R RCA jacks). You need a cable with a stereo miniplug on one end and 2 RCA jacks on the other. The soundcard should be set to 2-speaker mode. The DAV-BC50 does not have any way accept discrete multichannel from the soundcard nor to accept encoded AC3/DTS from the soundcard. You can use Dolby Prologic II to get all your speakers going, but you should not use processing when playing DirectSound3D games because it will dilute the intended 3D soundfield produced from 2 speakers.
-Dave
[email protected] Edited by dwh on 04-25-2005 04:56 PM

After installing the DR Driver on my Audigy 2 Value, I can no longer access the Equali

Installed the latest driver via the web update for my Audigy 2 value. When I reboot my machine and try to access the equalizer, it gives me a message saying "The audio device supported by this device is not detected etc". It worked fine before I installed this driver.
Any help appreciated.
Gyre

Can you try rolling back to the previous driver (if you have a restore point), or reinstalling this update? Does that have any effect?
If you have any onboard audio make sure that's fully disabled in the BIOS aswell.
Cat

Audigy 2 value and crash after installing and reboot

recently i bought the audigy 2 value model sb0400 sound card for the second time after i build myself a dream custom computer. Following installation i ran into a problem that reared its ugly head previously on my prior system that i eventually got so tired of trying to figure out that i returned the card. Whether i talk about the attempted installation on the old computer or the installation on the new computer there is one ever present problem of the computer crashing and not ever loading windows at all after installation. The installation of the drivers and bundled up software all appears to complete successfully prior to rebooting however when the comp is rebooted.........nothing a black screen appears instead of the windows xp loading which ends up never ever appearing. I would be very very greatful to anyone who might have a solution to this because in no way do i want to return the audigy card for the second time especially since absolutely everything i use in terms of sound is from creative 7. speakers and all.
Best regards

Say again? I have that box. I have my optical put in, but I cant get dolby. Is this card suppose to decode dolby or not? I'm talking about XP, not vista.

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Windows 7 Audigy 2 Value Equalizer?

I've had a look at the Creative support website, and installed the latest drivers. This works perfectly fine however, I only have "ALChemy" and "Audio Console" applications available.
Is there some way I can install the Equalizer application for Audigy 2 Value on Windows 7?
Thanks.

&Re: Windows 7 - Audigy 2 ZS Mic Issues? The support pack does absolutely nothing to fix the mic issues.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
and
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting

Qosmio G20 Vista drivers? Not needed to install Windows Vista

Hello,
I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
Below some pictures of my G20 Desktop screen:
http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
It is in paused mode
http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
To perform a fresh install of windows Vista:
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
2. Insert your Microsoft Windows Vista Edition Bootable DVD.
3. Power on your computer and press F12 to display the boot menu.
4. Choose the option to boot from the CD/DVD drive.
5. On the first setup screen, choose your language options then press "Next".
6. Press "Install Now".
7. Type in your Product Key then press "Next".
8. Accept the license terms by checking the box then press "Next".
9. When asked "What type of installation do you want", press "Custom (advanced)".
10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
11. Browse to the location you have copied the RAID drivers to then press "OK".
12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
13. Make sure the TOSHIBA RAID driver is selected then press "Next".
14. Continue the installation of Windows Vista as normal.
Now you will need the Toshiba drivers for your Qosmio G20:
See the Device manager info:
http://www.rabayjr.com/vista/qosmiodrivers1.jpg
Drivers:
1. SD memory controller
http://www.rabayjr.com/vista/drivers/SD_memory.rar
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
And finally the Toshiba utilities:
Toshiba Configfree
Toshiba Assist
RAID utilities
Remote control manager
Toshiba SD Memory utilities
That's it...
So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
Message was edited by: FranciscoJr

UPDATED POST: On March 08, 2007
This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
3.Download and copy the Toshiba RAID drivers to a removable media
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
4.To perform a fresh install of Windows Vista, Follow the steps below
-1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
-2. Insert your Microsoft Windows Vista Edition Bootable DVD.
-3. Power on your computer and press F12 to display the boot menu.
-4. Choose the option to boot from the CD/DVD drive.
-5. On the first setup screen, choose your language options then press "Next".
-6. Press "Install Now".
-7. Type in your Product Key then press "Next".
-8. Accept the license terms by checking the box then press "Next".
-9. When asked "What type of installation do you want", press "Custom (advanced)".
-10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
-11. Browse to the location you have copied the RAID drivers to then press "OK".
-12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
-13. Make sure the TOSHIBA RAID driver is selected then press "Next".
-14. Continue the installation of Windows Vista as normal.
5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
let Windows install all the drivers found for your Qosmio G20.
6. Reboot your machine and follow with the steps below.
DRIVERS YOU MUST INSTALL:
1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
http://www.rabayjr.com/vista/drivers/alpsdriver.rar
http://www.rabayjr.com/vista/qosmioalps.jpg
During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
But the driver posting here is the correct from the Alps for your Qosmio g20.
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
To install the nvidia 97.52, you must do it manually:
open the Device manager
look for the Video adapter/nvidia Gforce go6600
Driver update options
Look for a driver in computer
Choose a list of device drivers in computer
With disc...
Lool for the place you've extracted the nvidia 97.52.rar
Find the nvts.inf and open it
You will come to the following screen:
http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
From a list choose your video card (go6600) and install it.
If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
After the extraction, play it with Windows media Player
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
5.SoundMAX integrated digital audio. Driver 5.12.1.5410
http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
reboot the computer
Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
Continue with the installation and after finishing the process, test the functionallity of the new driver
OR
If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
link:
http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
http://www.rabayjr.com/vista/drivers/intel_wireless.rar
And for the Utilities you can download them from here:
1.Toshiba Configfree
http://www.rabayjr.com/vista/drivers/configFree.rar
2.Toshiba assist
http://www.rabayjr.com/vista/drivers/assist.rar
3.Raid utilities
http://www.rabayjr.com/vista/drivers/raidutil.rar
4.Remote control manager
http://www.rabayjr.com/vista/drivers/rcm.rar
5.Toshiba disk creator.
http://www.rabayjr.com/vista/drivers/disccreator.rar
6.Picture enhancement utilily.
http://www.rabayjr.com/vista/drivers/picenhan.rar
You can select your desired screen brightness and the monitor input settings:
monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
For using TV as monitor-in you also can switch from NTSC to PAL video system.
For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
http://www.rabayjr.com/vista/qosmiopicenh.jpg
After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
to wide screen input (16:9 aspect).
Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
The sandbox will allow you to process any audio in your system with one of three SRS technologies:
WOW HD: Provides enhanced width, bass and definition for music sources.
TruSurround XT: Virtualizes multichannel content for listening on two speakers,
with post-processing enhancements.
CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
with Circle Surround II.
link to download:
http://www.rabayjr.com/vista/drivers/srs.rar
8.Toshiba value added package:
About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
Do not install the Toshiba energy control. Designed only for the G30 model.
It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
9.Toshiba extended Tiles for Windows mobility Center.
http://www.rabayjr.com/vista/drivers/tileswmc.rar
10.Microsoft photo info.
http://www.rabayjr.com/vista/drivers/photoinfo.rar
OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
Francisco

Audigy 2 Value, hap17v2k.sys, and the B

Hello. I would like to state that if this is not the place for this question please feel free to remove it, I just figured this would be the first forum I tried for this question.
So here it is: I own a SB Audigy 2 card, and I'm trying to play this game: http://agtp.romhack.net/doukutsu.html - only when I load it, it causes my computer to crash.
Now for the long version:
I used to have an SB Audigy Gamer sound card, until I moved it into another computer and upgraded to this SB Audigy 2 Value card. I've played this game (which was built on DirectX 5, btw) with the old card and had no problems at all - though that was before I reformatted, so other settings and files may have changed. I can play other games fine - Final Fantasy 7 (uses DirectX 7), and even the newest stuff (Half-Life 2 - uses DirectX 9). This is the only game which does it.
Exactly what happens is this; when the game first loads, there is no sound (the way the game is designed). Once the title screen comes up, where there is sound, a second or two later my computer crashes with the following error, and an annoying clicking or screeching sound loop playing over the speakers (as you would normally hear if sound was playing when the computer crashes);
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Stop: 0x000000D (0x0000000, 0x00000007, 0x00000000, 0xB7C89B)
hap7v2k.sys - Address B7C89B base at B7C6A000, Datestamp 4095DD7F
Well that's some of it anyway. I'm fairly certain it's due to the sound card because (a) in the properties for that .sys file it has Creative as the manufacturer, and (b), the game comes with a seperate program for listening to the music files - running this program is fine, but as soon as you try to listen to the music - it crashes... same error.
Here's what I've done so far:
- Re-downloaded and reinstalled the game
- Uninstalled and reinstalled the sound card
- Uninstalled all PCI cards except for the sound card, and reinstalled the sound card
- Verified that Windows, all my drivers, and BIOS are up to date (including the audigy drivers)
- Verified that the sound card is not sharing an IRQ, or any other types of resources
- Tried the game with various Windows XP compatibility settings (Win95, etc.), reinstalled DirectX, messed with the sound card's hardware acceleration (all the way off and all the way on).
I think that covers it all - also I do have an open discussion with Creative's support, trying something new every day now but I'm hoping someone here can help even a little bit.
I've run all the dxdiag tests and they've all passed, but here is the output if it's any help; http://www.eaglemaint.com/link/DxDiag.txt
Lastly, my system specs at a glance:
Asus A7M266-D motherboard, Socket A chipset
Two .53 GHz AMD MP 800+ processors
256 MB nVidia GeForce 6800 GT
.5 GB PC200 DDR
250GB and 30GB HDDs
Two 52x CD-RWs
4-port Asus USB PCI card
3 Linksys 0/00 Ethernet PCI cards
550 Watt Antec PSU
I think that's all the important stuff. I've done searches here in these forums, on google (only a handful of sites even mention that .sys file, so I can't find any information on it), and in creative and microsoft's support websites. If you have any ideas at all on what might be wrong or what I could try to fix it, please let me know. My AIM name is "The Eagle Maint" if you'd prefer that, or my email is [email protected].
Thanks ahead of time for any help anyone may be able to give, and let me know if there is anything else I can provide... I'm sure I'm missing something.
-Mathew Tate

I'm not sure if the drivers are compatible between the two cards.
Recently when I uninstalled the audigy 2 and put in my old audigy card, I didn't remove the drivers first - upon restarting, the computer recognized my audigy with the audigy 2's drivers. It seemed to work ok, but I installed the normal audigy drivers anyway.
The catch is, well - the reason I really contacted support in the first place - when I had my audigy 2 card installed (with the audigy 2 drivers from the CD) I couldn't install the driver updates for my audigy 2 from the creative website. Basically, the online auto-update feature wasn't working, and when I manually downloaded the programs and ran them, they said that I didn't have an audigy 2 card installed. I got that resolved with support after they suggested that I download the audigy 2 'value' drivers - I had been trying to get the regular audigy 2 drivers (not value) before that... so basically, I think the audigy 2 can only take the drivers that I have installed now.
I suppose it is just some kind of incompatability, it just kind of baffles me because it used to work fine on my old audigy, and you said you've tried it with your audigy 2 and have no problem... computers can be such a pain.
Anyway, thanks for the help, I guess I should just be thankful everything else works ok.Message Edited by The_Eagle_Maint on 07-05-2005 04:25 AM

Error trying to run Audigy 2 Value driver inst

I recently purchased an OEM Audigy 2 value sound card that came with no driver installation CD. I have tried three times to download the drivers from the creative website and every time I have come up with this error while it is extracting:
File error CRC, 0xf3b0b7f:0xeb4fd5b
I am installing this to a brand new computer that has never had any sound card on in it. The on board sound is still running if that makes a difference.
I have looked throughout the forum with no avail. Any help on this would be very much appreciated.

I have the EXACT same problem... I can't seem to get anywhere with it either.
I've noticed a few such posts on the forum, but unforunately there have been no replies.
If anyone out there knows a workaround, please let us know!
Joe

Reset router after new clean install of vista?

I had to do a clean re-install of Vista. How do I get my router working again? I have the WRT54G. Do I reinstall the software and
go thru the whole set-up process again? I can get online with my laptop so I know it still works, but not my desktop which is
where the router is set up. Thanks for help.

Make sure that your Vista Desktop is connected to the router on Ethernet Port and the Port light should be lid.Also Check if the driver for the NIC on your computer is installed properly.
Check the IP address on the computer..Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IPV4 Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP V4' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...
If you are getting the IPV4 address as 169.254.x.x then,reduce the card speed...Click on the Start button >>> Control Panel >> Network and Sharing center >>Left hand side under task Click on manage wireless network >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK..

Audigy 2 Value left channel stopped working *complete

Sony Vaio pcv-rs530
P4 3.2 Ghz
Gb Ram
All-In-Wonder ATI Radeon 9800 Pro 28mb
Windows XP Home Edition v02' Service Pack 2
Logitech Z-5300e 5. Speaker system
I've had my audigy 2 value for about two months now. I managed to install it after a huge adventure of wiping my c: dri've after my first failed installation which ended me with no sound and no hope of restoring it back to normal, except the wipe, of course. It worked for a while, two months, but then I was having issues with my video card, possibly due to overheating because my audigy 2 value was one empty slot away from it and the circulation of air was not enough to keep it cool.
I stopped getting video related crashes after I put my sound card to the last slot, effecti'vely taking out my fax/modem, which I never used in the first place, in order to put the audigy 2 in the last slot, farthest away from my ATI AIW Radeon 9800 Pro. That little modem was blocking the last slot, making it impossible to put my sound card there. Then I noticed a few days later that my front left speaker was not working. I switched the speakers around, and everything worked except for the speaker plugged into the green line ouput, more specifically, the left front speaker never worked.
I'm currently using Logitech's z-5300e 5. speakers system, and they worked fine up until recently where the front left channel will not work. I tested it out on my xbox, and the speakers work fine. Both left and right speakers were okay. I took out my old desktop speakers that came with my vaio and plugged it into the green line output, and even then the left speaker didn't work. The same thing happened when I plugged my headphones in. The left earphone never worked. Both the old and new speakers and the headphones work properly otherwise (when not plugged into the audigy 2). I'm thinking my line output left channel has stopped working on the sound card itself.
I noticed that if I pushed the speaker plug into the outlet halfway, the front left speaker worked, but when I tested the calibration -- the voice matching said "front right" through the front left speaker. Even with all the speakers connected in any configuration, there was never a mention of a "front left" speaker. I concluded that the front left channel on the audigy 2 has stopped working.
Is this assumption correct? If so, wow. How would I go about fixing this? Does it have something to do with the slot switching? I reinstalled the drivers and programs for the audigy 2 after I switched. Although it did not seem to have a problem with me switching the slots even when I didn't uninstall anything. It detected the hardware switch, and everything worked fine. Should I try switching back to the other slot and hope my video card doesn't become one with my motherboard? The warranty has expired on my audigy 2 value, and I don't think I'll be compensated if I have no warranty, correct? All the drivers are updated, and it <EM>has</EM> worked before.
I've heard of other people's audigy 2 values that have had other channels just fizzle out in a few months. Am I one of them? Any information would be really helpful! Thanks.Message Edited by Paulie on 05-2-2005 06:30 AM

If you're sure noone was funny and turned down the left channel in advanced tab of Surround Mixer for instance, perhaps the connector loosened on the board or the soldering went bad; since your warranty expired (check with the store first!) I'd have someone who knows his way with electronics and soldering irons have a look at it.
PS I have the Audigy 2 Value as well; so far it works good but had I known it was treated like the ugly little kid in the Creative family that noone really likes to deal with i'd have gotten the ZS.Message Edited by Marco on 05-2-2005 0:2 PM

Audigy 2 value soft m

I've been using Audigy 2 value for a year and everything is still so cool.So I heard someone said I can effortless soft modify my card to Audigy 4 pro by driverhaven which sound quality will obviously be better.Of course,I'd love to do but I've no idea how can I do in the proper way if it's supposed to be.All views are appreciated.

pete99 wrote:
I've been using Audigy 2 value for a year and everything is still so cool.So I heard someone said I can effortless soft modify my card to Audigy 4 pro by driverhaven which sound quality will obviously be better.Of course,I'd love to do but I've no idea how can I do in the proper way if it's supposed to be.All views are appreciated.
"How can you replace differences on hardware (just look the component differences (ADC/DAC/...) with software only" if you meant your card would be better with this soft mod? Soft mod = ~ you can use Audigy 4 software with your Audigy 2 card. Perhaps you may get couple of new properties in use or new looking interface, nothing else.
You can use the drivers intented for A4 with A2, but these will not improve your card sound quality more than the A2 drivers would do. Wanna try? --> DL the latest Audigy 4 driverset and install it using ctzapxx -method (you can even install E-MU drivers for your card but those seem to be older than these Audigy ones).
jutapa

Audigy 2 Value Digital Output O

Hello
I recently bought an Audigy 2 Value and connected it into my expternal amplifier via the digital out connector. Is there a digital output only option hidden somewhere that would mute all the other outputs? It isn't under the advanced window of Play Control, that's where my old SBLi've used to have it. Thank you!

alright, i read the knowledge base articles and saw that the tests won't output more than left and right, but still, it's not working for my dvd's. i have my receiver set to "direct". is that right? i'm using windows media player for the dvd playback, should i try something else? do i have to install an AC3 codec? do i have to enable something in media player? anything please

Audigy 2 Value Lockup on Ins

Having major lockup problems after installing Audigy 2 Value card and software. Running 3.00ghz gig ram 95 mobo 6600 gt pci express XP sp2 - all was well with the world. Disable on board sound in bios, insert card, restart, disable Norton internet security, cancel windows found new hardware wizard, Creative Installation disc in D dri've start/run/ d:\ctrun\start.exe and.......once it gets past running installshield the whole lot locks up chronic.
The only way i could get going again was to run the 'last known good config' after F5 on boot. Have tried letting windows wizard install with the same result.
Wondering if its anything to do with the PCI express card or maybe i'm missing something.
Help.................anyone!

Hi Jason,
Had a look at the article but i am like another on this page - the whole system locks up - ie cant do anything except turn the machine off and boot in safe mode or last known good config - if you leave the card in the machine it locks up on every boot.
Any other thoughts?

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Audigy 2 Value Install on Vista... Is it POSSIB

Similar Messages

Maybe you are looking for