Audigy 2 Value is NOT an Audigy

I have had some discussions (and some copy and paste replies too) from Creative Tech Support on this issue and they actually told me that the Audigy 2 and Audigy 2 Value are using different chipsets somehow, and have different system requirements and different drivers. This is incredible, as I thought they were both Audigy 2, like an SB Li've! is the same basic thing whether it is Full/Value/5./Player etc... same APU.
So since I cannot get my Audigy 2 Value to work with Windows 98se when the OTHER Audigy 2's WILL, I'm sending it back, 'cos that policy does indeed sucketh the most. My SBLi've! will do for now, still hardware EAX which Soundstorm onboard my motherboard won't do.

The following file is standalone aswell, and can be installed without previous drivers:
EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS (3.57 MB)
Filename: SBA2_EAX4DRV_0303.exe
Requirements:
Microsoft? Windows? XP, Windows 2000, Windows Me (Millennium Edition) or Windows 98 SE (Second Edition)
Creative Sound Blaster Audigy 2 card, Audigy 2 Platinum eX card, Audigy 2 ZS card or Audigy 2 ZS Platinum Pro card installed, with or without drivers.</LI>
Cat

Similar Messages

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

GR/IR A/c Amount and Amount in local Curreny values are not matching

Hello Gurus
When we are doing MIGO for some Scheduling Agreement PO's the Amount and Amount in local currency columns are mismatching with paise (+/-), eventhough PO belongs to Local Currency (INR). Because of this GR/IR account is not cleared after MIRO through F.13. Both MIGO and MIRO amount are showing as Open items.
Why it is happening and what is the way to clear GR/IR A/C. (F.13 with Tolerance limit is also not workout).
Thanks & Regards
Venkat.P

Hi sridhar
Thanks for reply
Through MR11 also these values are not cleared.
Regards
Venkat.P

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

"Property value is not valid" when PropertyGridView tries to convert a string to a custom object type.

Hi,
I have a problem with an PropertyGrid enum property that uses a type converter.
In general it works, but when I double clicking or using the scoll wheel, an error message appears:
"Property value is not valid"
Details: "Object of type 'System.String' cannot be converted to type 'myCompany.myProject.CC_myCustomProperty."
I noticed that the CommitValue method (in PropertyGridView.cs) tries to convert a string value to a CC_myCustomProperty object.
Here is the code that causes the error (see line 33):
(Using the .net symbols from the PropertyGridView.cs file)
1
        internal bool CommitValue(GridEntry ipeCur, object value) {
2
3
            Debug.WriteLineIf(CompModSwitches.DebugGridView.TraceVerbose,  "PropertyGridView:CommitValue(" + (value==null ? "null" :value.ToString()) + ")");
4
5
            int propCount = ipeCur.ChildCount;
6
            bool capture = Edit.HookMouseDown;
7
            object originalValue = null;
8
9
            try {
10
                originalValue = ipeCur.PropertyValue;
11
12
            catch {
13
                // if the getter is failing, we still want to let
14
                // the set happen.
15
16
17
            try {
18
                try {
19
                    SetFlag(FlagInPropertySet, true);
20
21
                    //if this propentry is enumerable, then once a value is selected from the editor,
22
                    //we'll want to close the drop down (like true/false).  Otherwise, if we're
23
                    //working with Anchor for ex., then we should be able to select different values
24
                    //from the editor, without having it close every time.
25
                    if (ipeCur != null &&
26
                        ipeCur.Enumerable) {
27
                           CloseDropDown();
28
29
30
                    try {
31
                        Edit.DisableMouseHook = true;
32
/*** This Step fails because the commit method is trying to convert a string to myCustom objet ***/
33
                        ipeCur.PropertyValue = value;
34
35
                    finally {
36
                        Edit.DisableMouseHook = false;
37
                        Edit.HookMouseDown = capture;
38
39
40
                catch (Exception ex) {
41
                    SetCommitError(ERROR_THROWN);
42
                    ShowInvalidMessage(ipeCur.PropertyLabel, value, ex);
43
                    return false;
44
I'm stuck.
I was wondering is there a way to work around this? Maybe extend the string converter class to accept this?
Thanks in advance,
Eric

Hi,
Thank you for your post! I would suggest posting your question in one of the MS Forums,
MSDN Forums » Windows Forms » Windows Forms General
located here:http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=8&SiteID=1.
Have a great day!

Coulmn values is not being displayed in obiee 11g

Hi All,
Below is the sample xml generated from data structure.
++
+<DATA_DS>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331403</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140302</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD1</PRODUCT_NAME>+
+<REVENUE>3924973.97</REVENUE>+
+</G_1>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331401</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140104</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD2</PRODUCT_NAME>+
+<REVENUE>688244.58</REVENUE>+
+</G_1>+
+<G_1><LOCATION_NAME>EFGH</LOCATION_NAME>+
+<PRODUCT_ID>1011165401</PRODUCT_ID>+
+<PRODUCT_SUBID>101116540101</PRODUCT_SUBID>+
+<PRODUCT_NAME>EFGH1</PRODUCT_NAME>+
+<REVENUE>3763099.99</REVENUE>+
+</G_1>+
+</DATA_DS>+
We were unable to see the REVENUE column values in the report. We were able to see the values while creating layout, but unable to see the values in report. Report is not having any filters or parameters. This is build on two tables. Revenue in one table and details in another table.
Thanks.

Hi,
Just noticed that, able to see column values in HTML, pdf views but unable to see in interactive view.
While creating the layout checked in Interactive view, at that time able to get column values, but in the report column values are not being displayed in interactive view.
But in HTML, list option , Repeating Section is not working, so have to see in interactive view only.
I can say, in Interactive vew Aggregate functions are not working properly. We need tro use Repeating Section and List option in report. so we need interactive view only.
Any ideas..
Thanks.

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
 l_repid type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 dynpprog = l_repid
 dynpnr = '1000'
 dynprofield = 'S_FIELD-LOW' "Select options - low value
* etc

Replaced value is not getting relected in IDOC segment field

Hi,
Need your help for the below issue.
I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
Function Module which I am using is IDOC_INPUT_MBGMCR as a copy.
Here is my code given below:
SELECT
            SINGLE vbeln
              INTO lx_vbeln
              FROM lips
             WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
MOVE-CORRESPONDING e1bp2017_gm_item_create
               TO goodsmvt_item.
Then this is passed as TABLE in "BAPI_GOODSMVT_CREATE".
Please do the needful.

Hi Dheepa,
Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
Reddy

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Why the default value is not the Oracle recommended?

Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?

>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com

Field value is not getting populated in Display mode

Hello All,
I have created a custom drop down field in the DEAL component through EEWB. From the GUI, I could able to select a value form the drop down list field and save it.
In DISPLAY mode, the value is not showing but when I change the screen to EDIT mode then the value is getting populated.
Please advise.
Thanks in advance.

When debugging the set_property method I see the following code:
If ME->IS_CHANGEABLE( ) = ABAP_TRUE and "CLASS=CL_CRM_BOL_ENTITY
 LV_PROPS_OBJ->GET_PROPERTY_BY_IDX( LV_IDX ) ne IF_GENIL_OBJ_ATTR_PROPERTIES=>READ_ONLY
* change value
 <VALUE> = IV_VALUE.
In display mode none of these conditions are fulfilled, meaning value is not set.
So, is there a way of avoiding this behavior?

Values r not fetch in internal table

Hi Frds
In my report the values are not fetching in the internal table ICOSP
This is my program ,kindly correct my mistake.
DATA : WBS LIKE VBAK-PS_PSP_PNR.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS PROJECT FOR WBS.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
DATA: BEGIN OF IVBAK OCCURS 0,
      VBTYP LIKE VBAK-VBTYP, "SD document category
      AUART LIKE VBAK-AUART, "Sales Document Type
      NETWR LIKE VBAP-NETWR, "NET VALUE OF THE ORDER ITEM
      WAERK LIKE VBAK-WAERK, "SD document currency
      PS_PSP_PNR LIKE VBAP-PS_PSP_PNR, "WBS Element
      END OF IVBAK.
DATA: BEGIN OF IPRPS OCCURS 0,
      PSPNR LIKE PRPS-PSPNR, "WBS Element
      POSID LIKE PRPS-POSID, "WBS Element
      OBJNR LIKE PRPS-OBJNR, "Object number
      PSPHI LIKE PRPS-PSPHI, "Current project number
      END OF IPRPS.
DATA: BEGIN OF ICOSP OCCURS 0,
      OBJNR LIKE COSP-OBJNR,
      GJAHR LIKE COSP-GJAHR,
      WRTTP LIKE COSP-WRTTP,
      BEKNZ LIKE COSP-BEKNZ,
      WTG001 LIKE COSP-WTG001,
      WTG002 LIKE COSP-WTG002,
      WTG003 LIKE COSP-WTG003,
      WTG004 LIKE COSP-WTG004,
      WTG005 LIKE COSP-WTG005,
      WTG006 LIKE COSP-WTG006,
      WTG007 LIKE COSP-WTG007,
      WTG008 LIKE COSP-WTG008,
      WTG009 LIKE COSP-WTG009,
      WTG010 LIKE COSP-WTG010,
      WTG011 LIKE COSP-WTG011,
      WTG012 LIKE COSP-WTG012,
      WTG013 LIKE COSP-WTG013,
      WTG014 LIKE COSP-WTG014,
      WTG015 LIKE COSP-WTG015,
      WTG016 LIKE COSP-WTG016,
     SUM TYPE CURRENCY ,
      END OF ICOSP.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF ITAB OCCURS 0,
      PSPNR LIKE VBAK-PS_PSP_PNR,
      NETWR LIKE VBAP-NETWR,
      END OF ITAB.
PERFORM IVBAK.
PERFORM IPRPS.
PERFORM ICOSP.
PERFORM MOVE_COSP.
PERFORM MOVE.
PERFORM FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM ALVDISPLAY.
FORM IVBAK.
SELECT VBTYP AUART NETWR WAERK PS_PSP_PNR FROM VBAK INTO TABLE IVBAK
       WHERE PS_PSP_PNR IN PROJECT AND
             VBTYP = 'G' AND AUART = 'ZPCQ'.
CLEAR: IVBAK.
ENDFORM.                    "IVBAK
FORM IPRPS.
SELECT PSPNR POSID OBJNR PSPHI FROM PRPS INTO TABLE
         IPRPS WHERE PRPS~PSPHI IN PROJECT.
CLEAR : IPRPS.
ENDFORM.                    "IVBAP
FORM ICOSP.
LOOP AT IPRPS.
SELECT OBJNR GJAHR WRTTP BEKNZ WTG001 WTG002 WTG003 WTG004 WTG005
    WTG006 WTG007 WTG008 WTG009 WTG010 WTG011
    WTG012 WTG013 WTG014 WTG015 WTG016
    FROM COSP INTO CORRESPONDING FIELDS OF TABLE ICOSP
      WHERE OBJNR = IPRPS-OBJNR AND WRTTP = '4'.
ENDLOOP.
CLEAR:ICOSP.
ENDFORM.
Thanks
Pari

hi,
try this Code
DATA : wbs LIKE vbak-ps_psp_pnr.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS project FOR wbs.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
TYPES: BEGIN OF ivbak,
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document Type
netwr LIKE vbap-netwr, "NET VALUE OF THE ORDER ITEM
waerk LIKE vbak-waerk, "SD document currency
ps_psp_pnr LIKE vbap-ps_psp_pnr, "WBS Element
END OF ivbak.
TYPES: BEGIN OF iprps,
pspnr LIKE prps-pspnr, "WBS Element
posid LIKE prps-posid, "WBS Element
objnr LIKE prps-objnr, "Object number
psphi LIKE prps-psphi, "Current project number
END OF iprps.
TYPES: BEGIN OF icosp,
objnr LIKE cosp-objnr,
gjahr LIKE cosp-gjahr,
wrttp LIKE cosp-wrttp,
beknz LIKE cosp-beknz,
wtg001 LIKE cosp-wtg001,
wtg002 LIKE cosp-wtg002,
wtg003 LIKE cosp-wtg003,
wtg004 LIKE cosp-wtg004,
wtg005 LIKE cosp-wtg005,
wtg006 LIKE cosp-wtg006,
wtg007 LIKE cosp-wtg007,
wtg008 LIKE cosp-wtg008,
wtg009 LIKE cosp-wtg009,
wtg010 LIKE cosp-wtg010,
wtg011 LIKE cosp-wtg011,
wtg012 LIKE cosp-wtg012,
wtg013 LIKE cosp-wtg013,
wtg014 LIKE cosp-wtg014,
wtg015 LIKE cosp-wtg015,
wtg016 LIKE cosp-wtg016,
sum TYPE currency ,
END OF icosp.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF itab,
pspnr LIKE vbak-ps_psp_pnr,
netwr LIKE vbap-netwr,
END OF itab.
DATA : i_ivbak TYPE STANDARD TABLE OF ivbak,
       i_prps TYPE STANDARD TABLE OF iprps,
       i_icosp TYPE STANDARD TABLE OF icosp,
       wa_ivbak TYPE ivbak,
       wa_prps TYPE prps,
       wa_icosp TYPE icosp.
PERFORM ivbak.
PERFORM iprps.
PERFORM icosp.
*PERFORM MOVE_COSP.
*PERFORM MOVE.
*PERFORM FIELDCATALOG.
*PERFORM BUILD_LAYOUT.
*PERFORM ALVDISPLAY.
FORM ivbak.
SELECT vbtyp auart netwr waerk ps_psp_pnr FROM vbak
INTO TABLE i_ivbak
WHERE ps_psp_pnr IN project AND
vbtyp = 'G' AND auart = 'ZPCQ'.
ENDFORM. "IVBAK
*&      Form IPRPS
*       text
FORM iprps.
SELECT pspnr posid objnr psphi
FROM prps INTO TABLE
i_prps WHERE prps~psphi IN project.
ENDFORM. "IVBAP
*&      Form ICOSP
*       text
FORM icosp.
IF i_prps[] IS NOT INITIAL.
    SELECT objnr gjahr wrttp beknz wtg001 wtg002 wtg003 wtg004 wtg005
    wtg006 wtg007 wtg008 wtg009 wtg010 wtg011
    wtg012 wtg013 wtg014 wtg015 wtg016
    FROM cosp INTO CORRESPONDING FIELDS OF TABLE i_icosp
    FOR ALL ENTRIES IN i_prps
    WHERE objnr = i_prps-objnr AND wrttp = '4'.
ENDIF.
ENDFORM.                    "ICOSP
Regards
Sandipan

Value is not coming in excise invoice ..

Hi .all,
We have created one plant . For that we did STO , delivery , PGI , and billing ( commercial and excise ). But in Excise invoice , excise value is not coming ...
Pls Advc ....

hi,
pls check whether u have done relevant setting for the new plant code.
SPRO >Log general > Tax on Goods Movements > India > Basic Settings
reg
Deepak

New@SSIS - Excel Src: The value could not be converted because of a potential loss of data

Good day,
I am currently working on a SSIS package that had been built by a previous user. That Package allows me to import data from an excel source to a SQL table. The excel sheet holds multiple columns, However I am having difficulty with one
column when running the package.
The column rows hold a character and an integer (eg: N2). The data types are as follows:
SQL – varchar(3),NULL
SSIS - double-precision float [DT_R8]
I then inserted a data conversion task to change the data type. The task holds the following properties:
Input column – F6
Output Alias – Copy of F6
Data Type – string[DT_STR]
Length – 50
When I execute the package I receive the following error:”
[Excel Source Data [76]] Error: There was an error with output column "F6" (91) on output "Excel Source Output" (85). The column status returned was: "The value could not be converted because
of a potential loss of data.".
I do know that usually the message "The value could not be converted because of a potential loss of data." refers to a data type or length problem.
Further insight to this problem will be much appreciated.

Hi Zahid01,
From the error message you post, we can infer the issue is caused by the input column “F6” cannot convert to the output column in Excel Source.
Based on my test, I can reproduce the issue in my environment. The exactly cause is the data type of input column “F6” cannot convert to the data type of corresponding output column. For example, the data type of input column “F6” is [DT_STR], the data type
of corresponding output column is [DT_I4], and there are some nonnumeric values in the input column “F6”. When we execute the task, the error occurs. We can verify the issue in the Advanced Editor dialog box of Excel Source. The following screenshot is for
your reference:
To avoid this issue, please make sure the input column can convert to the output column in Excel Source, including all the values in the input column.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

Audigy 2 Value is NOT an Audigy

Similar Messages

Maybe you are looking for