Audigy 2 Value randomly pops/clicks when the computer is just idling.

EAudigy 2 Value randomly pops/clicks when the computer is just idling.; I can't figure out why the I hear random popping and clicking when I'm doing absolutely nothing to the computer. Typing this right now doesn't seem to cause any popping. It usually happens when I'm not really doing anything to my computer. This was happening with Creative's drivers and software so I switched to kX drivers, but that didn't help. When I first got my computer (Asus A7N8X-E Deluxe) and got the Audigy 2, I had no problem with Creative's software/drivers at the time, no popping had occur until I installed an SATA HD. PCI latency tool helped at the time. Then I had to go through a reformat and after the reinstallation of Windows XP, the popping started occuring randomly. After my motherboard supposely didn't want to POST anymore, I bought another one which was the Epox. And same problem occured even though I reformat and reinstalled windows.
Right now, the only thing I could think of that the SATA HD and Sound Blaster cards don't mix well together. But none of these are sharing resources. I did not want to try decrease any hardware acceleration at the moment, will there be any difference in sound or performance if I lower the acceleration?
Here are my current specs,
Windows XP Pro SP3
Amd AthlonXP 2600+ @ 2.2ghz
GB DDR Ram
ATI x800 xt AIW
Epox 8RDA3+ Pro
Running Sata HD and IDE, SATA is the master dri've.
Some other info,
The sound card is not shared by any IRQ
PCI Latency Tool didn't help when I tried to set the latency from 32 to 64
Bios is updated
Nforce2 drivers are updated
Klite codec pack 4.5.3 installed
kX drivers used instead of Creatives?
Onboard sound is disabled
Dxdiag did not find any problems
Keyboard is connected to PS/2 to USB adapter
Mouse is connected to USB

Similar Messages

Anyone else getting a random "pop" sound when the screen comes on?

It's random and doesn't seem to affect anything else, but every so often when I raise my wrist to view, a small pop sound emits from the speaker. It doesn't happen every time, and the speaker itself works fine. The only water that has come into contact so far has been from washing my hands.
Anyone else experiencing this?

I have this happen too! 42mm Stainless Steel.
I thought at first it was just the strap or strap connectors clicking when raising my wrist to view the screen, but today I isolated it to the speaker on the device. It doesn't happen every time, but enough that it's a mildly annoying quirk.
Also, if I take my watch into a very quiet room, hold the speaker slits to my ear, I can hear extremely faint white noise coming from it when the screen is lit. So for some reason when the screen turns on on the Apple Watch, the speaker wakes up too, and when the speaker wakes up, it sometimes emits an clearly audible popping noise.
Also of note, the speaker functions perfectly fine when on. Notification sounds and calls sound crisp and clear, just for some reason it pops when turning on the circuitry that controls the speaker.
My device has never touched water.

HT5625 My wireless internet connection keeps defaulting from my network to a neighbors' when the computer is left idle for a few minutes. How do I reset to my stay on my network?

My default internet connection keeps defaulting to a neighbors' network when left idle for a few minutes. How do I reset to use my network?

Likely both of you have Open networks and the Mac is just connecting to the strongest one, hopefully it's just that.
If you set a encryption and a password, then it shouldn't be doing this.
WiFi security issues, at home and WiFi hotspots
If you can't do this yourself, then have a local geek come by and set you up.
Also if you head to System Preferences > Network > Airport > Advanced, there might be a connection list, you drag your connection to the top and remove the ones your not going to use.

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time.How can I recover this data

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time. How can I recover my documents?

If you never saved, auto save does not kick in.
Peter

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

HT1338 My mac book pro has three updates ready to install. When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install.

My mac book pro has three updates ready to install. When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install. Help

Best to install them one at a time, re-booting between each one.

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

My Mac got hacked. I was working on a word document when the computer suddenly started typing meaningful sentences on its own that describes how the hacker is skillful. At the that time I was on a password protected wifi and file sharing was off.

This is the first time I get hacked this bad. I was working on a microsoft word document when the computer suddenly started typing meaningful sentences on its own that describes how skillfull the hacker is. At the that time I was on a friends wifi network that is password protected (not sure about the encyrption), the Os X Firewall was on. I was using the admin profile, however, file sharing was off. I'm very careful not to install any suspecious 3rd party software.
So far I have verified permissions and fixed some errors there, and changed passwords.
Do I have to erase/format my computer and reinstall the Os? If so is it adequte to use the internet recovery tool or will it use old and possibly infected EFI/Root files?
Would appreciate the advice of all the Mac experts out there. Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo launchctl getenv DYLD_INSERT_LIBRARIES; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; launchctl getenv DYLD_INSERT_LIBRARIES; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Preview will not print 8.5" x 14", only when the computer feels like it

This problem has gone on for too long and I don't know what else to do. I have flyers that I cannot print because preview refuses to recognize the document size correctly and consistantly, and I have no other program that can print to our copier.
This happens with any PDF that is not 8.5" x 11". Both 8.5" x 14" and 11" x 17" exhibit the same problem. First I open a PDF in Preview, then I change the document size in Page Setup to "US Legal" and scale of 100% (the scale is always wrong because it is automatically resizing the document to fit on 8.5" x 11"). Then I go to print, check under Paper Handling and under Destination Paper Size is says "Use documents paper size: US Letter". This does not change no matter how many times I visit Page Setup and no matter how many times I save and re-save the file.
At random it will recognize the document size as "US Legal", but this happens only when the computer feels like it, at least that's what it seems like because there are no other settings that are different between one file and another that would cause it to print one as Letter and the next one as Legal.
Some PDFs are created in Photoshop, while other are created in Acrobat. I cannot print directly from Acrobat because of some weird problem with our copier; I cannot print from any Adobe CS3 software.
I don't know what to do. Any help is greatly appreciated.

com.apple.print.custompapers.plist didn't exist on my machine, but com.apple.Preview.plist did. I moved it to the desktop as you suggested, opened the files in Preview and this time it worked. Thanks so much!
I tried looking at the file, but it didn't make any sense to me. Must have been something in there that caused the problem, though.

How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?

My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?

Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice.

Audio pops/clicks when changing angles in multicam clips

I am having problems with audio pops/clicks when working with angle switching in multicam clips. it always occurs when i utilize any of the "audio enhancements" features, such as the loudness or background noise removal features. Switching angles results in audible audio pops. The only way to get rid of them is to disable the audio enhancements. This occurs regardless of the audio source. Is this a known bug that is being addressed? I rely heavily on the audio editing features in my work and am hoping this will be resolved in an update soon. Thanks for any help-

Hi Brad, thanks for the reply!
That sounds like a good workaround. What I have been doing in the meantime is create a new compound clip after I finish all of my cuts, and then apply the audio edits to the new contiguous audio clip in the compound clip.
What is really strange and frustrating is that all of my new audio bugginess really began when I could no longer detach audio from my multicam clips in 10.0.9... After doing many searches here, it seems that in this most recent update of FCPX this is no longer a 'feature'... I don't know why they changed this, but in older updates of FCPX you could detach audio from original clips, compound clips, or multicam clips with no problems. I would routinely create and edit all of the angle cuts in my multicam clips in the timeline, and then if I wanted to, be able to detach the audio and do more edits if needed. Thankfully I can still apply edits to compound audio clips, but it would sure be nice if I could just correct/enhance audio without ugly-sounding artifacts in multicam edits. Thanks again-

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When I plug my ipod touch into the computer it just charges and won't appear on itunes!

when I plug my ipod touch into the computer it just charges and won't appear on itunes!

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Audigy 2 Value randomly pops/clicks when the computer is just idling.

Similar Messages

Maybe you are looking for