Audigy 2 ZS and Call of Dut

Whenever I enable CMSS 3D, there aren't any difference between Miles2D, EAX -2-3 on Call of Duty 2. Although audio mode is Miles2d, I'm playing COD with EAX Advanced HD. I don't think that I'd told my story exactly but someone may understand lol.. is this normal?..
http://img88.imageshack.us/img88/798/eax3sz.jpg

I've done web autoupdate and installed all of new drivers but still there isn't any difference between miles2d and eax-/2/3 on call of duty 2 (.3 version). what would I do?

Similar Messages

Audigy 2 ZS Call of Duty and United Offensive Logitech 55

All sounds are working fine with various games, music, DVD etc......in either Digital or Analog......impressed with Audigy 2ZS and Awesome Logitech 5500d's......
One issue in Call of Duty and also in the Expansion pack........
With any EAX version enabled......the Voices and Music no longer play.....but all the other Game noises play and sounds amazing in 24bit resolution using latest EAX3......
If I revert to Miles 2D then all music and voices also return to the game.
I have .5 on CoD and .5 on CoDUO......Used Creative Update to patch all Drivers to latest......Direct 9C installed........XP SP2.......everything patched....
Any ideas? Anyone else have this same problem? Is the Audigy defecti've? Wouldn't think so, because it sounds amazing in Half Life 2.........oh well........back to the complaining board ;-)
/NEP007

YEah it runs fine in "Miles Fast 2D positional"... there is a problem with EAX and CoD that Creative doesn't seem to have a fix for unless there is something i missed.
Message Edited by bootcamp on <SPAN class=date_text>06-02-2005 <SPAN class=time_text>04:23 PM
Message Edited by bootcamp on <SPAN class=date_text>06-02-2005 <SPAN class=time_text>04:23 PM
Message Edited by bootcamp on 06-02-2005 04:24 PM

Iphone 5s bad réception 3g and 4g signal and call

Hi, my iphone 5s very bad network reception in my home and my calls is very bad quality same outdoor.
Ios 7.0.2.
Sim card ok
All settings by defaut.

Hello there Kevkev5s,
It sounds like your call quality and reception are low both inside, and outside. I want to recommend a couple of articles to help troubleshoot the cellular connection quality. The first is named:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Increase the volume during the call.
Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
Make sure nothing is plugged into the headphone jack or the dock connector.
Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
Restart the iPhone.
Make sure your device is up to date.
If the issue is not resolved after restoring the iPhone software, contact Apple Support.
If the issue is not resolved, or the above does not help I would next try the troubleshooting in this article named:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thank you for using Apple Support Communities.
All the best,
Sterling

I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up.

I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?

dam122577 wrote:
but wont restoring as new delete all my info on my phone
Yes. That is why I added...
it will disappear over time due to non-use.

Dropped calls and "Call failed" on edge

My experience has been the opposite from others on the forum with the new 2.0.2 software. I can get 3G in town and I can place and receive calls just fine. At home, I only have an edge connection with usually 2-3 bars. 9 out of 10 calls I try to make from home fail. I get the three beeps and "Call failed" message on the screen. Usually it is a split second after I hit the call button. It's not even trying to make the call. I have restored it, restarted, etc. and it still happens! I cannot make a phone call at all. This is my business phone, and it is affecting my response to clients. Anyone have any suggestions? I will probably go to the genius bar tomorrow, but if I don't have to go through the hassle, I won't.

tigerarch,
Does this happen in all locations, or just your home?
What does the AT&T coverage map show for your home?
I live in a moderate area, and AT&T's disclaimer on the coverage map says that Good and Moderate may not have in building coverage. Not only does my iPhone sometimes not pick up a signal or complete calls, the same applies to other AT&T phones there.
My home is also made of stucco, which along with brick and cement block, is one of the worst materials for blocking signals.
If this only happens in one location, I would recommend contact AT&T and see if they will open a ticket. The probably won't open a ticket if your coverage is listed as "Moderate"
Hope this helps,
Nathan C.

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

Creating parameters dynamically and calling a procedure but strange issue

Okay I have the following program that is calling a procedure(data_compare_utility)[pasted below] and data_compare_table_setup table definition and data(isert scripts) are pasted below :
DECLARE
--FP_OLD_TABLE VARCHAR2(200);
--FP_NEW_TABLE VARCHAR2(200);
--FP_DATA_COMPARE_ID NUMBER(10) := 1;
--FP_RESTRICTION_CLAUSE VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')';
--FP_RESTRICTION_CLAUSE_4_INS VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')';
cursor c_data_compare_table_setup
is
select table_name, old_schema_name, new_schema_name, data_compare_id, restriction_clause, restriction_clause_ins from DATA_COMPARE_TABLE_SETUP;
r_of_data_compare_table_setup c_data_compare_table_setup%rowtype;
Lv_args_4_data_compare_utility varchar2(500);
BEGIN
--FP_OLD_TABLE := 'BIAPPS_11.RAHUL_EMPLOYEES';
--FP_NEW_TABLE := 'RAHULKALRA.RAHUL_EMPLOYEES';
open c_data_compare_table_setup;
Loop
fetch c_data_compare_table_setup into r_of_data_compare_table_setup;
exit when c_data_compare_table_setup%NOTFOUND;
--exec RAHULKALRA.P_COMPARE_DATA_UTILITY
Lv_args_4_data_compare_utility := ''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''';
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
commit;
End Loop;
dbms_output.put_line('rahul');
dbms_output.put_line(''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
close c_data_compare_table_setup;
END;
Procedure : compare_data_utility:
CREATE OR REPLACE procedure RAHULKALRA.p_compare_data_utility(fp1_old_table in varchar2, fp2_new_table in varchar2, fp3_data_compare_id in number, fp4_restriction_clause in varchar2, fp5_recrtiction_clause_4_ins in varchar2)
as
Lv_common_column_names varchar2(2000);
Lv_primary_column_name varchar2(50);
Lv_insert_data_compare_log varchar2(2000);
--Lv_counter number(10);
Lv_row_id_for_data_compare_log number(10);
Lv_old_table_record_count number(10);
Lv_old_table_rec_cnt_query varchar2(200);
Lv_new_table_record_count number(10);
Lv_new_table_rec_cnt_query varchar2(200);
begin
select max(row_id) into Lv_row_id_for_data_compare_log from data_compare_log;
Lv_old_table_rec_cnt_query := 'Select count(*) from '||fp1_old_table||' '||fp4_restriction_clause;
dbms_output.put_line(Lv_old_table_rec_cnt_query);
execute immediate Lv_old_table_rec_cnt_query into Lv_old_table_record_count;
Lv_new_table_rec_cnt_query := 'Select count(*) from '||fp2_new_table||' '||fp4_restriction_clause;
execute immediate Lv_new_table_rec_cnt_query into Lv_new_table_record_count;
dbms_output.put_line(fp5_recrtiction_clause_4_ins);
if (Lv_row_id_for_data_compare_log is null)
then
Lv_row_id_for_data_compare_log := 1;
else
Lv_row_id_for_data_compare_log := Lv_row_id_for_data_compare_log + 1;
end if;
Lv_insert_data_compare_log := 'insert into data_compare_log values('||Lv_row_id_for_data_compare_log||',''comparing data for '||fp1_old_table||' and '||fp2_new_table||''','''||fp1_old_table||''','''||fp2_new_table||''',TO_DATE('''||to_char(sysdate,'DD-MON-YY HH24:MI:SS')||''',''DD-MON-YY HH24:MI:SS''),'||fp3_data_compare_id||','||Lv_old_table_record_count||','''||'Select count(*) from '||fp1_old_table||' '||fp5_recrtiction_clause_4_ins||''','||Lv_new_table_record_count||','''||'Select count(*) from '||fp2_new_table||' '||fp5_recrtiction_clause_4_ins||''')';
dbms_output.put_line(Lv_insert_data_compare_log);
execute immediate Lv_insert_data_compare_log;
commit;
-- tested : dbms_output.put_line(Lv_insert_data_compare_log);
Lv_common_column_names := f_fetch_common_column_names(fp1_old_table,fp2_new_table,fp3_data_compare_id);
-- tested : dbms_output.put_line(Lv_common_column_names);
Lv_primary_column_name := f_extract_pkey_column_names(fp1_old_table, fp2_new_table);
dbms_output.put_line(Lv_primary_column_name);
p_compare_data(fp1_old_table,fp2_new_table,Lv_common_column_names,Lv_primary_column_name,fp4_restriction_clause,fp3_data_compare_id);
end;
CREATE TABLE RAHULKALRA.DATA_COMPARE_TABLE_SETUP
TABLE_ID NUMBER(10),
TABLE_NAME VARCHAR2(100 BYTE),
OLD_SCHEMA_NAME VARCHAR2(100 BYTE),
NEW_SCHEMA_NAME VARCHAR2(100 BYTE),
RESTRICTION_CLAUSE VARCHAR2(500 BYTE),
RESTRICTION_CLAUSE_INS VARCHAR2(500 BYTE),
DATA_COMPARE_ID NUMBER(10)
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('W_CHNL_TYPE_D', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('RAHUL_EMPLOYEES', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
I am facing the following error for this command when I call P_compre_data_utility procedure from my anonymous block:
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility); -- the error is pasted below
if I do a dbms_output.put_line(Lv_args_4_data_compare_utility) and then copy paste its output and call P_COMPARE_DATA_UTILITY, the procedure is getting executed, here is that command :
P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
Error:
ORA-06550: line 27, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_COMPARE_DATA_UTILITY'
ORA-06550: line 27, column 7:
PL/SQL: Statement ignored
Question : just want to know whats wrong with : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
please help me.
Regards
Rahul

Mac_Freak_Rahul wrote:
Hi All,
I am really sorry, my head is so aching since I am not a regular plsql coder and to save my life I need to write this code for data comparison between 2 tables .. further sorry about calling p_data_compare utility stupidly : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
I am calling it now using :
execute immediate 'exec P_COMPARE_DATA_UTILITY('||Lv_args_4_data_compare_utility||')';If you are sure the call works then, exec would not work since it is a SQLPLUS command.
try
execute immediate 'BEGIN P_COMPARE_DATA_UTILITY(''||Lv_args_4_data_compare_utility||''); END;';
PS: I can manually give table names to my utility , just need 60 tables to compare but would be great if I can work it out this eay.
2) I can sound very stupid since my head is aching I am not a regular plsql coder but from now on I would be one, please helpJust for your sake, to Compare 60 tables (Supposing you just want to verify count of records), you are writing an entire procedure; You might have completed this activity by now doing the manual way. By taking this way, you are investing time to generate a correct code (as you just mentioned not being a regular plsql developer) you are stuck with some un-identifiable issues.
As an alternate way, I would suggest you to export the data, after ordering, into a spreadsheet and then validate. Also, since it looks like you are comparing the data in the same database between schemas, you can also use the SQL Navigators Data Compare utility and there are many more readily available in market.
I would wish you the best if you still prefer taking the approach.

Simply way to make sub vi and call it form main vi

I'm a beginner and have major problems to make a sub vi and call it from main vi. I'm going to do a save dialog where is extra info for my saving and want to call dialog from main vi and after that save info to a file or database. I want that save dialog appears after i press button. I attach sub vi where is no functionality yet.
Attachments:
save_dialogsub.vi ‏21 KB

The first step is to connect the controls and indicators that you want to pass information to and from your main vi.
You right-click on the icon at the top right corner of the Front Panel and select "Show Connector". Typically put inputs at the left and outputs at the right side of the connector pane. Save it.
Open the main vi. Go to the block diagram. Click on "Select a vi" inside the Functions Palette. And choose the sub vi you prepared. Then wire it up inside your main vi.
-JLV-

How do I block messages and calls on the iPhone 5?

Hey people, how do I block irritating message and calls on the iPhone?

I'm having the same issue. It had the feature before and worked beautifully, and now when I try I do the same pinching/stretching method and nothing happens. I don't have an option to zoom anywhere in photo or video.

Session method and call transaction methos which one is the sap recomonded

hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0

Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL.

Calendar and call not showing in Notification Centre in iOS 6.0.1 in iPhone 4S

After i updated my 4S to iOS 6.0.1,Calendar Events and Call wont show up in the Notification Centre. I need to personally edit the Calendar Events fr them to show up. P

you can see the rest of the story at.....
http://m.youtube.com/watch?v=9Kbj-IVMxoU
Web Address (URL):
http://m.youtube.com/watch?v=9Kbj-IVMxoU

Problem with ALV_GRID and CALL TRANSACTION.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Question about Audigy 4 and bug report regarding the THX-cons

Will there be a non-pro version of the Audigy 4 and when?
The THX-console doesn't remember its settings when I switch from one speaker config to another. This is pretty annoying since I use both a hi-fi system and headphones.
Could you fix this please?
Thanks!

thanks for info. Sorry I didn't post this earlier but the slider has corrected itself. Also the is probably being used by the os

Audigy 2 ZS and Call of Dut

Similar Messages

Maybe you are looking for