Audigy 2 ZS and Live drive II ext. Is it posible to work togeth

I've got Audigy 2 zs. Friend of mine give me Li've dri've II, but with out any cables. Is it posible to work together an what is nesesery to do about?

I'm afraid not, those two aren't compatible. Audigy 2 (and onwards) dri'ves are compatible with that card.
Cat

Similar Messages

What is the difference between Icloud and Live Drive?

I had purchased for me seperate storage space where by i could download music/pictures to my cyper drive and my Ipad would pick it up. Is this Icloud or Live Drive?

That is livedrive. You cannot use icloud to keep your files online unless the files are generated using iworks. But, icloud is free from apple, 5 gb worth of space. Currently usage is pretty limited, cannot compare wth livedrive, dropbox or sugarsync.

Audigy 2 card with Audigy 2 ZS drivers and Live Driv

I recently bought a Li've!Dri'veII bay for my system. To use this I plugged it into my Audigy 2 Value card which I have had for about 2 years. The bay came bundled with a SoundBlaster Li've! Platinum.
I tried to install my drivers, but as a Platinum, but the Bay still did not respond, didnt send anything out or receive a signal in. There is definitely power because when I plug in the headphones you can hear some white noise, but thats it.
I searched round for a solution and one was to install the Audigy 2 ZS drivers. I did this by following the following instructions:
http://driverheaven.net/showthread.php?s&threadid=45004
This allowed me to also enable lots of extras such as the THX console and other stuff previously unused as my Audigy 2 drivers didnt have them.
Now I have 2 problems:
) my Li've!Dri'veII Bay isn't working and
2) In games I get sound glitches such as random noises that shouldnt be there, Missing noises such as gunshots are not heard or parts of the noise are missing.
So what do I need to do to sort this out, because I do wish to be able to use my system to its full potential.
Thanks in advance to anyone who can help.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

Audigy 1 and live drive II is

HI
I have just bought a li've dri've II to partner with my Audigy SB0090 after plugging it in and installing fresh drivers there is no response from the li've dri've, no matter what i do i can't get the dri've to work. Is this a fault with the dri've or is it something i have missed ? I wonder if it's a compatibility issue as i have a x-fi extreme audio in my computer to listen to music as well as the Audigy to record instruments with. But as both cards work fine it seems theres not and issue.
Many thanks JoshMessage Edited by landyman on 05-9-20070:2 AM

I'm afraid not, those two aren't compatible. Audigy 2 (and onwards) dri'ves are compatible with that card.
Cat

Audigy 2 ZS plat live drive prob

Hey everyone, I've had this problem for several months now (since I first got this card and li'vedri've, actually). The deal is that when I plug my headphones + mic into the li'vedri've in front and set the Creative Surround Mixer settings to Line 2/Mic 2, it works fine for awhile. Everyone can hear me in Ventrilo, Teamspeak, on CS, or whatever... but after awhile the settings get changed in the Creative program. I'll have to alt-tab out and see that instead of it being set on Line 2/Mic 2, its changed to the Microphone input...Has anyone experienced this problem? I gave up on it with my old headphones, cause the mic went out. Now I have some Sennheiser PC-50s and I want to be able to talk in my games again! Please help me figure out what could be causing the software to change inputs on me! You would think there would be an option to "save" your settings, but I don't see one, so I'm looking for some advice on here!Thanks in advance!-Nick-

Well, I just searched the forums here and found that this is a common problem in Counter-Strike, not the Creative software. I will try the solutions the other users have tried, and hope it works. If anyone still has a helpful comment, please post!

Audigy 2 ZS Platnum Live drive (or whatever you call it)Probl

My problem is that the Li've dri've(Thing that goes in 5 /4" dri'vebay) is not working correctly. First of all It is not detected in the remote options and the remote does not work with it, second the microphone jack and headphone jack won't work at all, The only thing that I noticed might be ali've was the opical port which still made a red light and i
tested the sp/dif ports in/out and they both work so whats up with this? Only half of the Dri've works please help!

To summarise everything worked ok for a period of time, then, when attempting to use the headphones (which had worked prevoiusly) there was no sound. Further investigation revealed that the remote, mic 2 and aux in 2 (which also worked previously?) also did not work but a red light still shows in optical out. You have tested these using the surround mixer to select the appropriate inputs.
The red light in optical out shows you have power and connectivity to the card also they appear in the mixer ( if I understand your initial post correctly) which shows the card detects the front bay.
This is difficult to comment on as everything seems to be as it should be. Please confirm in detail that my understanding is correct.
PS. it would help if you call things by their correct names.

Lightroom 5 and Google Earth-Pro? How to make them work together in Lightroom???

Please help me: I have a Mac, Lightroom 5 and Google Earth-Pro. Is there any possibility to change the ****** Lightroom-Maps to Google Pro Maps???? Would be great. Thanks for answering in advance!

Thank you anyway!!
Let's wait for a cooperation of both of them!...... or at least for a little improvement of the Lightroom-Map

Could EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 work together

Good day,
We are going to start a new project, where the client already has EPM add in for Microsoft 7.5. We need to migrate this system to EPM add in for Net Weaver 10.0. When we would testing systems we need to have on the one local PC 2 products :EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 to compare results. Is it possible to use them parallel? Is there any SAP documents or official materials where is information about this situation.
Many Thanks for the answear!

Hi Natalia,
I have the same problem to migrate project, you can' t have both of them logged on at the same time
I solve my problem with a virtual machine, i use VMWare with BPC 7.5 version and host machine with BPC 10 Version.
I hope this will help you.
Regards,
Maycon Franco.

Is there any way to get around the issue of AE7 and Lion OS not working together?

I use AE7 for graduate studies and business and just can't understand why it won't work together.

Why? Because Adobe has other priorities, in simplest terms. As with most commercial software producers, Adobe is looking to maximize their profits while their software developers are constrained to operate and optimize within their available development budgets, and also while delivering the corporate plans and schedules set by Adobe management.
What to do for this case? Migrate off of the Adobe software, migrate off of Mac OS X, deploy a virtual machine or Boot Camp (with Snow Leopard) and Adobe After Effects, or wait for Adobe to sort this out. For sufficiently large-scale customers of Adobe, they can chat directly with Adobe management around whether a bounty will expedite the work. (These are the usual answers, of course.)

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 2 ZS and Windows ME: switching to VXD drivers from WDM driv

Recently changed my sound card from an Audigy 2 to Audigy 2 ZS. OS is Windows ME. I used the VXD drivers with the old card and have been having lots of sound troubles that I have never experienced with a Creative card (distortion, sound sticking, etc.) using the WDM drivers and wanted to switch to the VXD drivers to see if this might correct problems. Have tried using CTZAPXX from original Audigy 2 ZS installation CD, but VXD drivers are grayed out.

I know it must be possible to switch to the VXD drivers, because on the Creative downloads page is a driver update with fixes "after switching to VXD drivers using Driver Utility."
One other note - When I do use the WDM drivers with this card, it is listed as "SBLi've!" under Audio Properties and it fails on Creative Diagnostics.


You have selected Audigy 2 ZS and Windows Millennium.To receive support for a different product, click here.
<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=7 border=0>
Drivers TitleDate <A target=_blank>[/url]<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=3 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=58 border=0>. EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS (3.57 MB) 9 Nov 03<IMG height=8 alt="Download Now" src="http://images.americas.creative.com//images/support/downloads/download-icon.gif" width=3 border=0>Download Now<IMG height=5 alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width= border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=522 border=0>
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.Hide Details
Filename: SBA2_EAX4DRV_0303.exe
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.
Added Feature:
EAX 4.0, containing DirectSound and Open AL API extensions, to utilize the EAX 4.0 ADVANCED HD Multiple Environment feature
</LI>
Fixes:
Removes noise from analog speakers after switching to VXD drivers using Driver Utility.</LI>
Allows compressed and uncompressed AC-3 signals when using VXD drivers.</LI>

Do you have an onboard audio processor? If so disable it in the BIOS and try to install the drivers from the CD first. Then head to Creative's web site and use the Auto Update option to dowload new drivers. If this does not work try installing the drivers from?a different driver if you have more than one. Some dri'ves that are defecti've or dying only install some disc contents before failing.?Hope this works for you!

Audigy SE,LS and SB Live!24 bit the newest drivers! read th

hello! sry for my english i'am from poland so i have a good news! msi has a motherboard k8n diamond plus with audigy se integrated and guess what? drivers are the same for audigy se pci! and are working !here is the link
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=70&kind=
enjoy!

here is the link to the 2000/xp driver for audigy se, ls and li've!24bit ( the same chipset CA006-DAT) http://66.96.84.4/support/dvr_exe/mbd_dvr/Creative_Audigy_Drivers.zip
the bass is greater on this driver! cool thank you MSI

SB Audigy 2 ZS and Windows 7 - Full Package driver?

4SB Audigy 2 ZS and Windows 7 - Full Package driver? [color="#000000"]Ok. I read some topic's where is explanation and download driver for SB Audigy 2 from Daniel K.
My question is about applications. Why offical drivers don't have applications?
"Audio Effects are high quality music enhancement efects created by the powerful audio engine in your sound device."
I need Audio Effects! Especially Advanced EQ and Graphic Equalizer.
The Sound is much better with this effects.
Please, do something because I love this sound card!

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 5 Rx and windows 7 64

I have just purchased the Audigy 5 Rx and windows 7 64 will not install this sound card , I can find in the device manager the Multimedia Audio controller card but when I try to install the drivers windows returns an error in installing them is there a trick or something I am missing , I have tried since Dec 30 with no luck even took the card out and put it back in , I am using a PCIe slot

Look on your CD for a "drivers" folder and then the WDM. You can browse to this in device manager and manually install your drivers by finding your AUDIGY 5, double clicking, then choose update driver, and then browse my computer for driver software. After installing, reboot. Retest the card. I have done this several times over the years when "setup.exe" on the CD wont work.

Audigy 2 ZS and Live drive II ext. Is it posible to work togeth

Similar Messages

Maybe you are looking for