Audigy 2 ZS and THERMALTAKE XASER VA8000BWS RT connectors. He

http://img28.exs.cx/img28/776/sbaudigy2zs8nx.th.jpg[/img] alt="Free Image Hosting at www. ImageShack.us" >
Click Picture for Larger View
Problem: Can I, &/or how do I, connect the PC Case's Top panel Microphone IN and Headphone Out jacks to the Audigy 2 ZS Gamer soundcard?
The link above should show the basic outline of what I'm dealing with, the connector in the upper left corner of the picture is undocumented from what I have been able to find in all of my searches and I don't know if it has anything to do with what I want to accomplish.
What I have shown in the blue box of the linked Pic is a crude representation of the leads from the jacks ON the CASE, that I wish to enable.Message Edited by Lahru on 03-04-2005 :47 PM

so i tried to disable onboard sound through device manager and there doesn't even seem to be that option? (again, i'm really not very savvy with all this, this is the first time i've ever had to deal with this since getting my original machine almost 5 years ago)? i took a screen cap to help illustrate:
<img width="687" src="http://i42.photobucket.com/albums/e32/punkpipe/nodisable.jpg" alt="" height="526">?
?the only items listed with the option to disable are the two Creatives; Creative Game Port and Creative SB Audigy 2 ZS (WDM)

Similar Messages

Need help: front audio w/ P55-GD55 and thermaltake armor

Hey guys,
I am trying to connect the front panel audio on my thermaltake armor(VA8000BWS) case to my msi p55-gd55 motherboard. My case has 1 wire coming from the front panel with 2 connections on the end that connects to the mobo. The ear mic chart for my case lists as follows:
1-EAR R
2-Return R
3-EAR L
4-Return L
5-MIC IN
6-MIC VCC or MICBIAS
7-Ground
The chart for my motherboard lists as follows:
1-MIC L
2-Ground
3-MIC R
4-PRESENCE#
5-HEAD PHONE R
6-MIC DETECTION
7-SENSE_SEND
8-NO PIN
9-HEAD PHONE L
10-HEAD PHONE DETECTION
Do I simply plug in my cable as is or do I have to move around some of the wires? Any help would be greatly appreciated!

Quote from: XFM on 14-November-13, 07:56:50
That is a pretty old case and front panel audio in it is for AL'97 not the HD audio that the MB has. You need to get a front panel audio module for HD audio from somewhere.
So i can't connect the front panel audio on the MB? It was nice if i could, but no problems then.
Thx for the help

Audigy 5 Rx and windows 7 64

I have just purchased the Audigy 5 Rx and windows 7 64 will not install this sound card , I can find in the device manager the Multimedia Audio controller card but when I try to install the drivers windows returns an error in installing them is there a trick or something I am missing , I have tried since Dec 30 with no luck even took the card out and put it back in , I am using a PCIe slot

Look on your CD for a "drivers" folder and then the WDM. You can browse to this in device manager and manually install your drivers by finding your AUDIGY 5, double clicking, then choose update driver, and then browse my computer for driver software. After installing, reboot. Retest the card. I have done this several times over the years when "setup.exe" on the CD wont work.

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 2 ZS and Halo 2 in Vista 64-bit

I just purchased Halo 2. In Vista 64-bit, it sounds horrible using an Audigy 2 ZS. The problems come when the action picks up. The sound comes in and out. Sometimes, it cuts out all together. Come on Creative Labs, get us some decent drivers!!

Hmm, odd. I play Halo 2 on XP x64 using an Audigy 2 ZS and I have no odd sound issues. So, I'm surprised it would be any different in Vista with x64 vs x86. I mean even in XP there are a few little tricks to getting it to work in x64 over x86 (not going into that here) but none of them involve sound issues.
However, when I did have Vista x64, I didn't have any problems (I was using the Audigy at the time) in any of my games. Although Halo had a weird sound issue that was resolved by turing Vsync on (or off I can't remember - whichever is not the default) and that resolved it (it was a sort of popping noise every now and again). Creative really needs to get their butt in gear on releasing a new Audigy driver for Vista. Their unreleased timetable is completely unacceptable from a consumer and OEM standpoint.Message Edited by devguy on 08-04-2007:04 PM

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Audigy 2 ZS and Surround Mixer in Windows 7

+?
Ok, I just installed Windows 7 Enterprise on a new HP XW 4600 workstation (NL, Dutch). This is a clean install. I have a Audigy 2 ZS (SB0350) and I dont have the surround mixer. Here is what I did:
?Install Windows 7 Enterprise and take all the pathes from Microsoft.
2.
?Intall the Audigy 2 ZS soundblaster? card in the computer
3.
?After the boot up I ingnore the message ?found new hardware?
4.
?I go to the Creative website and download the following programs
SBAX_PCDRV_LB_2_8_00 and WAVESTD_PCAPP_LB_7_2_00? which are recommended for my sound card.
5.
?I cant find the surround mixer, it is even not installed
6.
?I try the ?webupdate? there are some updates and I install them all
7.
?Again no Surround Mixer.
Can someone explain what I do or did wrong ?
I realy need the Surround Mixer !!

/Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Daniel K's Drivers
<a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
[color="#000000"]
[color="#000000"]Robert McClelland's Drivers
<a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

Audigy 2 ZS and inspire T7700 no 7.1 with mov

Hello. Maybe you can help me:
I was trying to watch Episode one (with Dolby sourround EX) with power DVD 6 an Windvd 6 plat but i'm having problems with my 8 channel output because when i start the THX optimizer, the sound that is supoused to be heard on my side speakers, comes from the rear speakers and the sound from channels 6 & 7 (Rear center) its also coming from those speakers. This Failure also happens with the Windvd Channel test: side speakers doesn't work and in power DVD 6, CLMEI II technology does not work with side speakers. The only way to get sound from my side speakers is with CMMS.
The tests for the THX console for audigy 2 complete succesfully altough it keeps me saying that my side speaker and sub aren't wired correctly (polarization test). The channel and noise testing goes ok besides that.
This problem is exclusi've to DVD watching beacause with EAX HD 3.0 or 4.0 games, i'm not having any problem.
is Dolby digital EX in episode really works with 7. configurations (region 4)?
How do i need to configure this players to work with the installed decoders?
Are my speaker set defecti've?
Can i buy some kind of monster cable to imrpove my sound?
It's that all right that the sound from 5. tracks (DD or DTS) is played from the front and rear speaker and not in the side ones?
Note:
The supoused wiring problems repeats itself even if i change the connector of the the side speakers with the rear ones (that are soppoused to work fine). That means (i think) this problem isn't caused by the speakers wiring (i think i made it ok) could it be that the 7. cable is deffecti've?
What to do? Please Help me
Creative Staff: where i can go to check this on Mexico city? is there any sopport center where i can go and get some help?
My config:
Audigy 2 ZS and Creative inspire 7. T7700

My guess is that your PowerDVD and WinDVD versions don't have ES support and you're using the programs to decode. This might be the case if you are configuring the programs for multiple speakers. If you are, try configuring them for SPDIF output, then make sure the soundcard is configured to decode AC3/DTS (it probably is). Does that help?
-Dave
[email protected]

Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So

Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PM

Turn on CMSS if you have not done so.
Jason

Best EAX Effects with SB Audigy 2 ZS and Headset?

Best EAX Effects with SB Audigy 2 ZS and Headset?Hi,
I have reinstalled Windows XP SP3 lately and installed just the Audigy_SupportPack_3_8 as driver for my Audigy2 ZS. I have a Sennheiser PC50 headset.
Now I can't get EAX to work.
The EAX setting in game is enabled and it sounds different than without it but I can only distinguish left from right but not top from bottom and front from rear.
Am I lacking any driver component?
How do I setup the audio device in Windows? Headphones or 4 speakers?
Do I need CMSS 3D? CMSS or CMSS2? Even if the game supports EAX?
What about optimize 3D-Effects for headsets? I use a headset, so I should enable it's
And also I can't find the suround mixer, is this not included in this support pack?
I mean this one:
Best Regards
sanni

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 2 ZS and Windows ME: switching to VXD drivers from WDM driv

Recently changed my sound card from an Audigy 2 to Audigy 2 ZS. OS is Windows ME. I used the VXD drivers with the old card and have been having lots of sound troubles that I have never experienced with a Creative card (distortion, sound sticking, etc.) using the WDM drivers and wanted to switch to the VXD drivers to see if this might correct problems. Have tried using CTZAPXX from original Audigy 2 ZS installation CD, but VXD drivers are grayed out.

I know it must be possible to switch to the VXD drivers, because on the Creative downloads page is a driver update with fixes "after switching to VXD drivers using Driver Utility."
One other note - When I do use the WDM drivers with this card, it is listed as "SBLi've!" under Audio Properties and it fails on Creative Diagnostics.


You have selected Audigy 2 ZS and Windows Millennium.To receive support for a different product, click here.
<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=7 border=0>
Drivers TitleDate <A target=_blank>[/url]<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=3 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=58 border=0>. EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS (3.57 MB) 9 Nov 03<IMG height=8 alt="Download Now" src="http://images.americas.creative.com//images/support/downloads/download-icon.gif" width=3 border=0>Download Now<IMG height=5 alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width= border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=522 border=0>
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.Hide Details
Filename: SBA2_EAX4DRV_0303.exe
This driver update contains enhancements and fixes to improve the performance of your Creative Sound Blaster Audigy 2 or Creative Sound Blaster Audigy 2 ZS product.
Added Feature:
EAX 4.0, containing DirectSound and Open AL API extensions, to utilize the EAX 4.0 ADVANCED HD Multiple Environment feature
</LI>
Fixes:
Removes noise from analog speakers after switching to VXD drivers using Driver Utility.</LI>
Allows compressed and uncompressed AC-3 signals when using VXD drivers.</LI>

Do you have an onboard audio processor? If so disable it in the BIOS and try to install the drivers from the CD first. Then head to Creative's web site and use the Auto Update option to dowload new drivers. If this does not work try installing the drivers from?a different driver if you have more than one. Some dri'ves that are defecti've or dying only install some disc contents before failing.?Hope this works for you!

Audigy 2 ZS and external digital mixer and digital cd pla

Guru's,
I've got a problem getting a sound from my Audigy 2 ZS card in combination with an external digital mixer and a digital cd player. One channel of the mixer receives data from the PC (Audigy 2 ZS) and one channel receives data from the CD player. The mixer is connected to a dolby surround system- dvd player that connected to the speakers. When I try the digital out I don't get any sound, when I use one of the analog ports I do get a sound. What is here the ideal set-up and why can't I use the digital out ?
Here's also a picture:<IMG src="http://www.delier.demon.nl/Conf.bmp">

Dmob wrote:
Guru's,I've got a problem getting a sound from my Audigy 2 ZS card in combination with an external digital mixer and a digital cd player. One channel of the mixer receives data from the PC (Audigy 2 ZS) and one channel receives data from the CD player. The mixer is connected to a dolby surround system- dvd player that connected to the speakers. When I try the digital out I don't get any sound, when I use one of the analog ports I do get a sound. What is here the ideal set-up and why can't I use the digital out ?Here's also a picture:<IMG src="http://www.delier.demon.nl/Conf.bmp">
Do you mean, you do not get digital out from Audigy?
If yes, then have you set Audigy for digital output?
See Audigy User's Guide for options (if you don't have one, you can download it herefrom.
.jtp

Audigy 2 ZS and Digital I/O module compatibili

Hi,?Looking to build a HTPC and thinking about using the Audigy 2 ZS as my sound card. I have a question about it though. Accourding to this- - http://us.creative.com/local//produc...es/sbchart.asp?the Digital I/O module is not compatible with the 2 ZS. I downloaded the manual for the Audigy 2 ZS and it says to use a 3.50 mm (/8-inch) mono-to-RCA cable and I cannot find one of those anywhere, and it appears to me that the Digital I/O module does basically the same thing. So will the Digital I/O work with the 2 ZS or does anyone know where I can get that 3.5 mm mono to RCA cable, it has to be a coaxil digital cable though.
My goal is to have Dolby Digital sound just my my DVD player I have now only with my PC so I can have one media hub, my HTPC. Also if anyone has built a HTPC and has a good setup please reccomend Im open to all suggestions,? Thanks for anyhelp at all.

sprint_9,
Yes, you're right. The Digital I/O module isn't compatible with the Audigy 2 ZS soundcard.
You should be able to find a 3.5mm mono to RCA cable easily from your local audio/electronic stores if not, you can also get a 3.5mm stereo to dual RCA cable for the same purpose. Take note, only one end of the RCA cable has the audio signal(Sorry, can't remember whether it's the white or the red end).
You can also find such cable from online stores like this.
http://www.ramelectronics.net/html/RCA-mini-spdif.html
Jason

Audigy 2 ZS and

I am getting a hum (grounding issues ?) when Audigy 2 ZS is in the PC.
The hum goes away (or is very faint)?when I disconnect my TV cable,?but theAudigy 2 ZS still has a tiny hum
PC line out is connected to my Panasonic receiver using a ground-loop-isolator cable, and TV cable to VCR, which is connected to receiver (A+V).
Any ideas how to rectify this ?
Where is problem ? Audigy 2 ZS or TV Cable ... or both ?

/Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Daniel K's Drivers
<a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
[color="#000000"]
[color="#000000"]Robert McClelland's Drivers
<a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

Audigy 2 ZS and ASIO 24/96

I have seen several posts about how to use ASIO 24/96 driver for Audigy 2 ZS but they are pretty old now and the problem I have experienced is just a few years old.
I used the driver on my old XP 32 bit computer for critical recordings for highest possible quality though it was only possible in Wavelab for single track recording/playback. Running multitrack was too heavy for my computer. I then had a long break from music making and started again a year ago. I couldn?t get that driver work again but didn?t bother much as I didn?t have to record any external audio yet.
Last weekend I upgraded my computer to a quadcore cpu with 6 gig RAM and Windows 7 Pro 64 bit. I can now use ASIO 24/96 and it runs smooth and free from glitches - but it only works for playback. Whatever input I choose all I get is silence. The other two ASIO drivers works though but they cannot record in 24 bit/96 kHz. In worst case I could have used the WDM drivers only for the recording part but those does not work at all at any rate - I get so much dropouts that the recordings are full of "holes".
Has the drivers been changed during the years so actually can't record when using ASIO 24/96 driver? If it wasn?t for the fact that it didn?t work on my XP?system either I would have thought it was a Windows 7 issue.

Gorilla wrote:
For some reason I have an error message in ADIC Pro 5.
I have an Audigy Platimum Pro and I changed the audio devie type in the Preferences to SB Audigy 2 ZS ASIO 24/96 (FF40), but when I try to record and check the little monitor bar, I can see the levels, but I hear no sound. If I uncheck it, I see no levels, but I hear sound. I cannot record because of this sicne when I hear the sound nothing is getting recorder. I doublechecket everything but I cannot solve the problem. Please help me if you can
Thanks
Peter
Hmmm.. What the error message says?
Which input source you have selected to record from?
Have you selected the output port(s)?
Are project samplerate and bit-depth set to 24/96?
Does this issue occur when ASIO res is set to 16-bit/48 kHZ?
Is tehere a setting for monitoring on ACID audio/global properties (other than the ON/OFF found on every track)?
jutapa

Audigy 2 ZS and THERMALTAKE XASER VA8000BWS RT connectors. He

Similar Messages

Maybe you are looking for