Audigy 2 ZS - Break out Box/Rem

I was wondering about this, is there any other application that can take advantage of the breakout-box and remote other then what Creative supplies? I find that most of the Creative applications tend to be too. memory heavy, so I was wondering does anyone know any programs that can take use of the Remote/IR?

Since no one else replied, I'll mention that the proprietary white connector (toward the front of the card) has L&R headphone outputs. You'd have to hack it, which mostly isn't recommended, but that's your choice. I haven't tried to use this jack myself, and I'd proceed with great care in trying this if I were you. There is some info on it here:
http://www.devhardware.com/forums/multimedia-73/audigy-2-zs-front-of-case-audio-mic-connectors-5584-2.htmlMessageMessage Edited by Katman on 2-25-2005 :09 PM

Similar Messages

  • Audigy 2 ZS Notebook + Audigy 2 ZS Platinum Pro Break-Out-Box?

    > Hi,
    i run an Audigy 2 ZS Platinum Pro on my Desktop. Now i'm thinking about buying the Audigy 2 ZS Notebook for my ThinkPad to be more flexible. Is it possible to run the Break-Out-Box from my Platinum Pro with the Audigy 2 ZS Notebook. On photos i've seen something like an Ad-Link cable for the Audigy 2 ZS Notebook.
    I run Ubuntu Studio on both, my desktop and my notebook.

    Did you set the encoding to be done by an?external device and also try by enabling the bit-accurate playback?jutapaMessage Edited by jutapa on 02-02-20080:0 PM

  • How can I use Pinnacle break-out box to capture in CS5

    A colleague uses Pinnacle's break-out box to capture analog video directly through CS4, bypassing Studio.
    I have CS5, and bought Pinnacle Studio 14.
    But when I open CAPTURE in CS5, I get a "capture device offline" statement. Anyone got any ideas?
    CL

    Or...
    Old forum message, message now gone, but here's the summary - I have not used, only made note of the product "Matt with Grass Valley
    Canopus in their tech support department stated that the 110 will suffice for most hobbyist. If a person has a lot of tapes that were
    played often the tape stretches and the magnetic coding diminishes. If your goal is to encode tapes in good shape buy the 110, if you
    will be encoding old tapes of poor quality buy the 300"
    http://www.grassvalley.com/products/advc55 One Way Only to Computer
    http://www.grassvalley.com/products/advc110 for good tapes, or
    http://www.grassvalley.com/products/advc300 better with OLD tapes
    Or ADS Pyro http://www.adstechnologies.com
    ADS Pyro $120 http://www.bhphotovideo.com/c/product/462759-REG/ADS_Technologies_API_557_EFS_PYRO_A_V_Lin k_with.html
    Pyro has low rating @Newegg and low at BHPV
    Below said... I have the ADS Pyro AV Link and it works flawlessly and it bypasses MacroVision
    http://forum.videohelp.com/threads/275966-Is-Canopus-50-55-100-110-REALLY-god-s-gift-to-th e-VHS-capture-universe
    ADVC55 $159 http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Analog_to_Dig ital.html
    ADVC55 has higher ratings at BHPV with very few low ratings and also high rating @Newegg
    Next Article said Liked the ADVC55's picture quality the best
    http://www.macworld.com/reviews/product/406056/review/advc55.html

  • Break out box question

    Is there a break out box that works with Premier CS6 and has a fire wire input? I have a Panasonic psgv320 mini dv camera and need material from the tape imported into Adobe. It uses a dv to fire wire cable.

    If your camera is digital tape, you connect the camera to a Firewire port and it should be recognized by P-Pro
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
    -and more about Windows http://forums.adobe.com/message/4708997
    If you have an ANALOG camera or tape player, you need a converter between your device and Firewire port
    Such as http://www.grassvalley.com/products/converters

  • Break-out-box does not respond, but is powered on

    Hey!?Big Problem... my break-out-box doesn't work any more. There is no possibility to use the mute function, IR-control, CMSS-Control or to do anything else with it... simply dead, although it is powered on. LED is green and at the optical out i have a red one shining. I tried cleansweap and reinstall drivers, nothing changed the situation. Cable are correctly connected, i didn't change the last years. I'm also missing the extended connection possibilitys in my "sound and speakers" options... formerly there where a lot more, now there are only?fi've or six controller bars. WHAT HAS HAPPEND? Is it normal that there are three steps with the CMSS options like: CMSS, CMSS2 and STEREO SOUND? I remember that formerly there was also CMSS3... correct? MAybe this is another wrong thing... Any hints regarding this box and controller problem?Thanks a lot in advance,Alabaster

    Try doing a clean reinstall (i.e. backup data, format and reinstall) of Windows yet? Sounds like something else apart from the drivers got corrupted.

  • Audigy 2ZS Platinum Pro - breakout box not work

    I have an an external external breakoput box which was working fine in my old computer. I upgraded the mother board and cpu and installed the Audigy as before. The actual card works but the break out box doesn't light up. If I plug the external box firewire cable in to another firewire port on the computer the power LED lights but that's all. Any ideas anyone?

    I am sorry to bump this topic but it is the same as my question and does not seem to have been answered.
    I have a Audigy 2ZS Platinum Pro - my old one which I decided to use in lieu of the on-board sound. I installed the latest drivers I could find SBAX_PCDRV_LB_2_18_0017.exe (after unistalling the existing ones)
    The card itself works fine but the external interface box is as dead as a doornail. The power for the interface is supposed to come from the two connectors.
    No lights no nothing - obviously I have checked the leads and the seating of the card itself. Playback is fine on MP3, midi, wave files etc. I have disabled the on-board sound in the BIOS of course.
    Unfortunately the jacks on the back of the card are 1/8 in. outputs only and the external interface provides the inputs which I need for recording etc. They are 1/4in proper ones - guitar lead size which are much better.
    I know it is an old card but I like it. The last time I used in in my old computer it was fine. Card/drivers show up in the device manager. I have installed this both on a Win 7 partition and a Win XP partition on my 2 HDDs with the same result. :mansad:
    <font color="#0000FF">Any ideas appreciated! Is there something I am doing wrong? Thanks.

  • 3.5mm break out to optical and analog

    I got a new iMac with the mini jack combo output (so you can plug in headphones / speakers or use it as an optical output).
    I'd like to hook up a set of optical speakers and a set of analog speakers. I was wondering since the headphone jack on the back of the iMac has BOTH but combined into one, is there a break out box or adapter that will allow you to use both digital and analog?
    I've searched around online for a while but cannot find anything, does anyone know of this type of adapter?
    Thanks
    -Steve

    Hi Steve,
    the audio-port on the iMac (and the other Macs as well) has a small micro-switch in it which is used to determine whether an analog or a digital connecter is inserted.
    So in essence you cannot get both analog and digital out of the combined port.
    Sorry
    Stefan

  • Break out iPad iworks apps?

    Is it possible for the hosts to break out the iPad iworks programs like the desktop iWork is? Many of us are experts in one area, not so much in others and I cannot seem to get a link to just the one area I typically help in. I have to manually refine the group down each and every time I visit the pages. I forgot recently and was answering a question that was worded in a ay it could have been for any of the three apps.
    I would have gone back and edited my response, but was forced to post another response to my own post due to the fact that I am on an iPad. Go figure iPad supporters working from iPads.but we can't edit posts.. Go figure. I know beating a dead horse. :)
    Jason

    How often do people use the tags though? I don't because I don't know what the available tas are. Do you just make them up? The few times I posted, there was no selection drop down or check boxes.
    Tags are a nice way of filtering subjects. They will eventually become a great, and also a primary, way of searching for subjects and related subjects.
    Yes, you do just make them up (if, when you're posting, you don't see a related tag, or you want to add further context to your post after selecting available tags). If you are going to creat a tag with multiple words, use an underscore between the words to keep them grouped together, i.e., tags_question.
    When you start a topic, choose from available tags at the bottom of the text field, just above the Post Message button:
    You can edit, change or add tags during the fifteen minute editing period following your original post.

  • Breaking out of a for-in-a-for-in-a-for

    I have a question about how the break statement works. Take this:
    for (int i = 0; i < 10; i++) {
         for (int j = 0; j < 10; j++) {
              for (int k = 0; k < 10; k++) {
                   if (something) {
                        break;
    }Am I right in saying this will only break out of the very inner for loop? What I want is a way to break out the very inner and second inner for loops, but NOT the outer. Is there a way to do this? Thanks!

    Darryl.Burke wrote:
    I would prefer to factor that out into its own method.private void method() {
    for (int i = 0; i < 10; i++) {
    for (int j = 0; j < 10; j++) {
    for (int k = 0; k < 10; k++) {
    if (something) {
    return;
    }db(Being not bright enough to think in three dimensions concurrently, let alone four) I hate deep-nested-loops.
    class Cube ....
      private boolean contains(T target) {
        for (int y=0; y<NUM_ROWS; y++) {
          if (rowContains(target, y)) return true;
      private boolean rowContains(T target, int y) {
        for (int x=0; x<NUM_COLS; x++) {
          if (colContains(target, y, x)) return true;
        return false;
      private boolean colContains(T target, int y, int x) {
        for (int z=0; z<CELL_SIZE; z++) {
          if (cube[y][x][z].equals(target)) return true;
        return false;
      }... and hows about a CellVisitor to encapsulate all that nasty repeated for-x-for-y-for-z code.... a tad slower but (unless you're algoracing) who really gives a flying toss.
    Just another alternative.
    ;-) Keith.

  • Why is my preview area showing only greyed out boxes instead of photos?

    I am unable to import my photos so they can be seen.  Whether I try to import them from the hard drive, camera card, or my desktop (following the tutorial), I do not see photographs in the preview area, only greyed out boxes instead of photos.  If I imported 6 photos, I have six greyed out (photo-sized) boxes.  The specific photos are there somehow, becuase they are properly named when I scroll the mouse over them, but I see only flat grey, no pictures.  As I said, this happens even when I follow the tutorial and import from my desktop.

    George,
    I appreciate you responding to my inquiry.  We (that would be the "royal" we, which would be my husband) finally determined that the monitor was not configured properly.  "We" discovered this out after uninstalling and reinstalling Lightroom several times.
    To answer your question, I was trying to import both photos taken in JPEG, as well as RAW, both were problematic.  I could import no images.  It was interesting that I could tell all of the data was coming over (when I floated the cursor over a grayed-out box I could read the data), just not the images. 
    I have a Nikon D5100.  I purchased Lightroom 5.0 just before now(two days ago), and was trying to install and play with it.  I upgraded to 5.2 as I was going into it for the first time (it is an automatic question).  I knew there was obviously a problem when I couldn't see any images.  Particularly when I went into the tutorials -- it just reemphasized that something was wrong.  Who ever thinks of how their monitor is configured?????
    Thank you for following up.  I was very frustrated for many, many hours. 
    Kelly

  • Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

    I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
    They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
    I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
    plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

    You are correct. The SIM Tray of iPhone 5 does not have the Serial #  printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

  • I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only

    I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.

    The serial number will be on the disc case, not the outer box.  Find your serial number quickly

  • How do I stop iTunes from breaking out all the songs in one album into multiple albums?

    How do I stop iTunes from breaking out all the songs in one album into multiple albums when the artist has many collaborators on the different songs, for example Timbaland?  I want to just listen to the full album with all the songs, instead of having to play every song separately.

    For your solution, see Steve MacGuire's helpful article:  http://samsoft.org.uk/iTunes/grouping.asp

  • My wife has iCloud on our computer and I want to break out and create my own account. Once I build the account how do I copy the address book from her account into mine?

    my wife has icloud on our computer and I want to break out and create my own icloud account. I've built the account but can't figure out how to COPY our joint address book onto my account so I can then weed out my own addresses. Please help!

    Welcome to the Apple Community.
    When you log out of the joint account, you should be asked if you want to keep the contacts, you do. When you log into your new account you should be asked if you want to merge contacts, you do.
    If you have already signed into your new account and not taken these options, the simplest thing to do might be to add your wife's account back as a secondary account in system preferences > mail, contacts & calendars. In groups in address book you can drag contacts from your wife's contacts onto your contact group to copy them.

  • How do I change the text color in a call out box?

    How do I change the text color in a call out box?

    See http://help.adobe.com/en_US/acrobat/X/standard/using/WS58a04a822e3e50102bd615109794195ff-7 e5a.w.html
    Also http://helpx.adobe.com/acrobat/kb/unable-edit-properties-text-box.html

Maybe you are looking for