Audigy 2 ZS/Creative Inspire 7.1 issues, please he

<FONT face="verdana, arial, helvetica" size=2>Ok guys, I just put together my new Creative Inspire 7. speaker set (already had an Audigy 2 ZS) and none of my games are recognizing the speakers as 3d. The control panel is set, I double checked my wire connections. What have I missed?

Justcrash,
What games are giving you this problem? Also make sure you are set to 7. in both creative speaker settings and in the Advanced Section for speakers that is in the Sounds and Audio Devices section of Control Panel.
Jeremy

Similar Messages

Creative inspire 5300 poping help please help

HI all i have had the Creative inspire 5300 for 2 years now on the same pc nothing changed and worked perfectly until now.
now the last 4 weeks i am getting poping thud sounds from all speckers at diffrent times it looks like a interferance problem. I think
I have a surge protector which did not help so i was woundering if my 5300 are broken as thay should have a protector built into the sub for sound interferance i would of thought.
is this a comon problem with these 5300 over time ?
thay still work and sound great but the poping thud is making me mad and not only that thay do this when the pc is turned off so its the speackers that are doing it
i have a asus motherboard this one
http://uk.asus.com/products4.aspx?l=...=58&modelmenu=
also would the Creative inspire T7900 work on this motherboard as it has an onboard sound card which has High Definition Audio Enjoy high-end sound system on your PC! The onboard 8-channel HD audio (High Definition Audio, previously codenamed Azalia) CODEC enables high-quality 92KHz/24-bit audio output, jack-sensing feature, retasking functions and multi-streaming technology that simultaneously sends different audio streams to different destinations. You can now talk to your partners on the headphone while playing a multi-channel network games. All of these are done on one computer. The Dolby Digital Live technology from Dolby Lab encodes the multi-channel audio source into AC-3 bit-stream and outputs it to S/PDIF port in real time.
thanks for any help

Hi,
I have the same problem, I also have a Asus motherboard. Recently they did a massive pop sound and turned off, then all i got was a lot of feedback noise. Is this a problem with the mboard rather than the speakers?
Dan

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Audigy Platinum Ex and Inspire Digital 5500 Speak

Having li'ved with my old Cambridge speakers now for about 3 years years I have recently noticed a sound similar to a distant rumble of thunder on the speakers, the longer they are left on the lounder and more frequent the rumble becomes. So, as they are getting on a bit I have decided to invest in a new set of speakers - Creative Inspire Digital 5500's, but they have yet to arri've.
Have I made a mistake in ordering these speakers? I have read several threads that intimate there may be a number of problems/incompatibility issues.
From what I can gather I either have to plug the speakers directly into the Audigy card outputs to retain the software advantages (5. speakers, base, treble and EAX) and then lose the manual ability to control the volume from the supplied Inspire Amp/mixer OR plug the speakers into the Amp/mixer and lose the software control.
My main use for the speakers is listening to music, not really interested in Dolby output or watching DVDs, screen and study too small, but I do occasionally watch a film or TV episode on the PC.
If anyone can either confirm or deny my percieved error in ordering these speakers it would be most appreciated.
Dave McCreath

Hi All
Answering my own question for others to find should they have any qualms.
New speakers arri'ved and installed. Connected to PC via coaxial input and work fine on both stereo (front left and right speakers only) and Dolby Pro Logic (all speakers - WOW!!).
Using Audio HQ, supplied with my Audigy software, I can test the speakers but only the front right and left work with the test. However, all work fine with the speaker test from the inspire 5500 remote - so verdict:
I am impressed with the quality, easy set up and sound manipulation. EAX also works fine!
Dave Mac

Audigy 2 ZS Platinum- Inspire 4.1 don't see each other after computer move

?? Running: Windows XP Pro
Sound Card: SB Audigy 2 ZS Platinum? Driver Version 2.8
? Speakers: Creative Inspire 4. 4400
? Software: Creative Media Source 3.30
I moved my computer to another room and started having sound problems. I removed Creative Media Source 5 ( I had it when I used the creative zen mp3 player ) because I thought it was redundant on my system. My sound is now hollow and tinny. But the truth is I don't know what caused the problem to begin with since the Holidays were involved and many people were at my computer. I only want the sound to be as great as it was before.
These are my problems:
. No matter how many times I set the audio properties through the volume control icon on the taskbar, the configuration always resets to desktop stereo speakers instead of surround sound.
2. Using the Creative Speaker Settings results in information showing that there are only 2 speakers attached and they are synchronized with control panel. Under speaker calibrator it reads that there is a generic speaker system.
3. Using the calibrator Wizard, only 2 speakers show up.
4. Normally in the EAX console, the Effects tab shows many settings - but now there is nothing inside the box.
5. On the CMSS3D tab, the slider for the speakers is grayed out
6. The THX setup console on the Speaker selection tab there is nothing under the speaker selection tab - There is an analog output and a digital 48khz under digital sampling.
7. Under calibration there are only left and right front speakers the subwoofer and rear speakers are grayed out
This is what I have done to troubleshoot my problems:
. Used Auto update of card which reads that everything is updated. There are no drivers for the speakers, so that is ok.
2. Through the Creative Organizer I enabled CMSS
3. Through the Creative Audio console on the Decoder tab, I have checked use built in decoder and under speaker mapping for 4./5 using side channels
4. Under Dolby digital settings Dynamic Range is Full - Dolby Pro Logic is ON - Dolby Digital EX is ON --- DTS for Es is ON
5. Made certain all connections are secure and verified the placement of the green and black wires coming from the subwoofer are connected to my computer in the correct place, namely that the black wire is in the second hole from the firewire port and the green wire is in the third hole
Please help me if you can. I'm ready to throw in the towel, I would even buy digital speakers but don't know which way to turn. I don't know if it's the card or the speakers or the fact that I removed the Media source 5 (for which I can't find the disk.)
Thanks in advance for reading this and taking the time to troubleshoot with me.
Jane

Hello KokChoy-CL.
Many thanks for your support!
I've been reinstalled the drivers and changed the options of your link, now the DTS 5. effects are quite working on my xbox.
Again, thank you!
Lucio.

Connecting Creative Inspire 5.1 speakers to DVD player

Hi,
I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
Plz reply back to [email protected]
Thanks,Sambath

Creative offers many speaker systems that will fit your needs, without decoder.
You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative inspire t6300 5.1 surround on mac pro 1.1, optical out to 5.1 audio gear (digital sound decoder).

Hi there,
Been searching and trying a lot but no luck so far. I have a surroundset Creative Inspire t6300
to be able to add some more fun to movies and a few games on my mac.
I own an upgraded Mac Pro 1.1 under Snow leopard, 2.33 gHz, dual processor, 8 core, 8 gb memory.
Even though it`s a piece for the museum, it works very well for designwork I do for work. No real need
to update for me, so....
As I understand, the optical out is standard 5.1. (By the way, the only other ports are the basic sound ports out
and in on the Mac). So after some research I found and got the 5.1 audio gear decoder. I connected this with
an opticle cable and used the 3,5 jackets from the surroundset to connect to (from left to right) cen/sw, (yellow
jacket) fl/fr (green jacket), sl/sr (black jacket) on the decoder. All perfectly understandable and it seemed to work well.
But when I tested with some of the testfile you find when googling on that, I think there is something wrong,
the typical surround effect is not there, it rather sounds more like stereo or even 5 mono`s.
I`ve tried Soundflower and JackPilot, but couldn`t get it right. With Soundflower I was able to choose 5.1 setting
(was not possible before) but testing it didn`t work.
There is an extensive test of the decoder on the net by someone who really is deep into the technics of it all but
no luck there either.
Back to basics: is it right that the optical out is truely 5.1 on the mac? With several tests the unit SFE does not react.
But when I play some music with iTunes, it works (loud and clearly :-)). Maybe I need a visit to the audiologist ;-) ?
Anyone?
tested with: http://www.youtube.com/watch?v=eL9-sIZRDHg&channel=alexnosenko
http://www.youtube.com/watch?v=sMh_zvCw6us
https://www2.iis.fraunhofer.de/AAC/multichannel.html

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Probelm with Creative Inspire T6100

Hello everyone, I'll really appreciate it if someone could help here. Just bought a new PC with sound card on board.Motherboard is: GB P35-DS3 /P35/LGA775The sound card is Realtek High Definition Audio. Along wiht the PC I got a 5.1 channel speaker system - Creative Inspire T1600. I installed the latest drivers for the sound card, also made sure the speaker system is plugged into the sound card slots as per the user guide and yet there is no sound coming out at all from the speakers. I also tried plugging out the speaker system and plugging in a normal pair of headphones, still no sound?.... I have re-installed the sound drivers a few times and there is no indication the issue is with the driver. Please help. Thanks a lot

Hey, thanks for your reply but I've figured it out. It was a problem with the sound card driver... It works now and it's great!

Audigy 2 ZS and inspire T7700 no 7.1 with mov

Hello. Maybe you can help me:
I was trying to watch Episode one (with Dolby sourround EX) with power DVD 6 an Windvd 6 plat but i'm having problems with my 8 channel output because when i start the THX optimizer, the sound that is supoused to be heard on my side speakers, comes from the rear speakers and the sound from channels 6 & 7 (Rear center) its also coming from those speakers. This Failure also happens with the Windvd Channel test: side speakers doesn't work and in power DVD 6, CLMEI II technology does not work with side speakers. The only way to get sound from my side speakers is with CMMS.
The tests for the THX console for audigy 2 complete succesfully altough it keeps me saying that my side speaker and sub aren't wired correctly (polarization test). The channel and noise testing goes ok besides that.
This problem is exclusi've to DVD watching beacause with EAX HD 3.0 or 4.0 games, i'm not having any problem.
is Dolby digital EX in episode really works with 7. configurations (region 4)?
How do i need to configure this players to work with the installed decoders?
Are my speaker set defecti've?
Can i buy some kind of monster cable to imrpove my sound?
It's that all right that the sound from 5. tracks (DD or DTS) is played from the front and rear speaker and not in the side ones?
Note:
The supoused wiring problems repeats itself even if i change the connector of the the side speakers with the rear ones (that are soppoused to work fine). That means (i think) this problem isn't caused by the speakers wiring (i think i made it ok) could it be that the 7. cable is deffecti've?
What to do? Please Help me
Creative Staff: where i can go to check this on Mexico city? is there any sopport center where i can go and get some help?
My config:
Audigy 2 ZS and Creative inspire 7. T7700

My guess is that your PowerDVD and WinDVD versions don't have ES support and you're using the programs to decode. This might be the case if you are configuring the programs for multiple speakers. If you are, try configuring them for SPDIF output, then make sure the soundcard is configured to decode AC3/DTS (it probably is). Does that help?
-Dave
[email protected]

Creative inspire T12 sound quality

Hi everyone,
I bouth the Creative inspire T2 bluetooth laptop speaker?a few weeks ago?and after using it, I started to notice anoyingly too present [ch] and [sh] in the videos, almost like if they were whistlings. I first believed It was the video or the wiring, but i did the test again, in different location and compared it with several of my other speakers and it still stand out.
Is it my speakers who are faulty or is it a generic issue?
Should I ask a replacement? If yes where do I send it, the package tells me that it was send from Dublin and I live in France.

Tyalis,
Please write to Customer Support, they will advise what to do and where to send the speakers to.

Sound Card for Creative Inspire T7700

What sound card do I need to have for the Creative Inspire T7700 and how do I find out what I have.
Message Edited by amzngbac on 12-18-2004 09:09 PM

amzngbac,
In order to fully optimize the 7.1 speaker you have, you will need to get a sound card that support 7.1 speaker system. The Audigy 2 ZS series range support this.
http://us.creative.com/products/prod...04&product=495
Jason

Creative Inspire T6100 - I got a problem, pls help me!

I just bought a creative Inspire T6100 system, but I got a strange problem.
I can hear just from the rear left and center speakers, all the others are muted. Every wire is perfectly connected to my phase 22 with 3 jack connectors. I tried to disable the basic soundblaster in the motherboard(I got an asus P5K), but it's the same... nothing changed...
Can someone help me pls?

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire 6.1 6600 Sound Problem

I have a Creative Audigy Audio Processor (WDM) (Audigy 2) and the speakers are Creative Inspire 6.1 6600. The sound goes down when the selector of volumen is between 3 and 4. I need to increase the volume to make it sound again, but it goes down again. What`s going on?

Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

Creative inspire T7

Hi,
I have creative inspire t7700 speakers and I'm having issues with them.
Are there still trouble shooting help on these type of speakers on the creative site?

Hi,
You could try our Knowledge Base and see if the issue in your speaker is listed down there. If not, try to post back more details on it and possibly other user/s have some workaround solution for you.
Best of luck.

Audigy 2 ZS/Creative Inspire 7.1 issues, please he

Similar Messages

Maybe you are looking for