AUDIGY 2 ZS doesnt works with vista ultimate

The problem is, when i try to install the drivers SBAX_PCDVTBETA_US_2_2_000, this message below appear to me:?"Setup is unable to detect a supported product on your system.Please ensure that your product is properly installed beforerunning this Setup program.Setup will exit."?The point is before this, Vista tries to find the driver to my Audigy 2 ZS without any success... So, any body knows some solution for this?ThanksByron

I have the same problem with Vista home premium. I've tried every driver possibilities, I reinstalled the original disks and then the Vista beta drivers and my card still isn't being recognized. My computer can play sound but all of the advanced features of my sound card are unavailable.

Similar Messages

Shortcut [ALT]+[SHIFT]+[P] doesnt work with Vista ultimate??!

hello
when i try to create a new position key frame in the time line, i always used the shortcut [ALT]+[SHIFT]+[P]. on other versions before Vista it was working perfectly.
on the Vista ultimate though, instead of creating a key frame, i get the windows "mediaplayer" loading up, every time i use this shortcut.
i looked for this shortcut to change within media player, but couldn't find it.
is there a way to change the shortcut inside after effects?
i am using after effect CS3.
all other shortcuts (like [ALT]+[SHIFT]+[J] or [ALT]+[SHIFT]+[S]) are working fine...
thank you
R Sting

Go to the start/Windows button, click and in the search box type "Windows Media Player." DON'T select the icon (thereby opening the application).
INSTEAD, right click the icon for the media player and choose "Properties." You will see a box for shortcut...just delete the one that's there and it will now show as "None."

Will any Creative MP3/Video Players Work With Vista Ultimate/Yahoo Music Out of the B

i've had a heck of a time getting my zen touch to work with my new vista ultimate dell pc, almost ready to give up. why i'm even thinking of getting another creative device given the above i'm not sure, but if i was, do any of the current devices (20gb or greater, mostly for music but want video capabilities) work with vista and yahoo music correctly and without a huge amount of heartache? and if not, any other devices i should look at? i really like the yahoo music service so don't want to go the apple route. thx!

iTunes is only intended for iPods and iPhones. In recent releases, Apple has instituted changes that prevent it from being used with other devices, e.g. release 8.2.1 deliberately broke the ability to sync with the Palm Pre.
Since you will be using multiple platforms, make sure that all music that your rip or purchase is in MP3 format. Then your music can be used in iTunes, Creative, or any other player or program, without conversion or compatibility problems.
Per the problem with Zen and Vista, you may wish to try the question on a Zen discussion.

XML Publisher Enterprise 5.6.2 doesnt work with Vista ultima and IE 7

XML pub enterprise edition latest was installed on vista ultimate successfully.
trying to access the server using all host names (local , mypc name , 127 address,,,,etc) using IE 7 and opera and firefox ,,,ALL without being able to see the the first screen of the publisher.
unable to find the host "http://myserver:15101/xmlpserver" is always the message i got.
any one to help me to make it working
thanks in advance
ali azizeh

Note:418234.1
At the time of writing this note Internet Explorer version 7 running on Windows Vista is not certified for use with Oracle AS. This certification is planned.

Flash in Firefox with Vista Ultimate Works a while then stops working until restart

I recently got a new computer with Vista Ultimate. I
downloaded all the patches and installed the latest versions of
Firefox (2.0.0.4) & Flash Player (9.0.45.0). I have the
following add-ons loaded in Firefox: Firebug 1.05, Greasemonkey
0.7.20070607.0), Tab Mix Plus (0.3.6), Talkback (2.0.0.4), DOM
Inspector (1.8.1.4). This is the process that happens.
1) Connect to the computer in questoin using RDP
2) Launch Firefox and go to a site like Youtube or MySpace.
It works great. Everything plays that I click on.
3) Disconnect from RDP and reconnect.
4) The Flash plays never work again. They will typically
start a show for 2-10 seconds and then just "halt". This is every
movie I view off of either YouTube or MySpace. Even if I close the
Myspace & YouTube tabs and open them in a new clean tab.
If I close Firefox and reopen it everything starts working
again. Again this appears to work until I disconnect from RDP
again.
What is going wrong here? What can I do to fix this or upload
data dumps so this can get fixed?

hallo
I have a photosmart C148x. It stops while printering. In the mean time on the display of the machine it says printing.....

Audigy 2 ZS Platunum Pro (working with vista x64 beta

Just posting to let all you people know the Audigy 2 ZS does actualy work with vista beta 2 64bit the drivers them self do not work nor do any of the others but if you play around with them for a few hours (not using this work around which sucks) you can get them to work.
All I used was the drivers for XP 64bit and the Beta drivers with the XP drivers in first then uninstalled then put the new drivers in after.
Problem is for now they only work in stereo, though the breakout box does work with the voilume and such.
So dont give up sound will come from your audigy 2 zs just not very easly :P
EDIT: Well it seems that most people know this now, anyone got a sound way to get 5. working?Message Edited by Cafuddled on 06--2006 :2 AM

I would like to add my two cents to this. I had an RM-500 which stopped working after a while. My MCE IR receiver seemed to pick up an infra-red signal from the thing but the dri've bay didn't respond.
I then tried an older RM-900 from an old Audigy installation and that worked perfectly with the dri've bay. So in my case, the RM-500 was dead ( the battery was ok ).

Audigy 4 Pro Problems in Vista Ultimate 64

Hello,?I have Problems with the Recording Source Line in / Mic and What you Hear on my Soundblaster Audigy 4 Pro in Windows Vista Ultimate 64bit. I use the Beta Drivers 2.2.0002When i record over Line in / mic or What you hear sometimes the recording iss?distorted.When i restart my System sometimes it works sometimes not.

I have not had that issue with an Audigy 4 with 32bit Vista. Don't expect to get many answers from Creative here though. I would use your onboard sound untill they get decent drivers out for Vista 64. Are u from Ohio Good luck, Diseaseboy

Can't get coldfusion to work on Vista Ultimate

Need help, tried other stuff on other postings trying to edit
jrundll file that doesn't seem to exist
I'll look at so many places to try and get coldfusion 7 or 8
to work with IIS or Apache on Windows Vista Ultimate which came
pre-loaded with the new laptop.
It just gives me a 404 error complaining about the MIME
types.
I saw one forum that I need to edit the wcnfiguration.config
files (some name similar to that) in the system 32 interdel folder,
but I get an access denied error when trying to edit in
notepad....even though I am logged in as the administrator.
The index page for coldfusion works afte the install as well
as IIS 7.0 is working fine, but when trying to execute a .cfm fikle
it just gives that 404 error and doesn't seem to recognise the .cfm
file. I tried adding the CFM in MIME types in IIS admin and
selected coldfusion/application but it didn't work. I then changed
the CFM descrip to text/html (something like that) and it then
launched the cfm file and showed the html part of it, but didn't
process the coldfusion. It may be a simple MIME configuiration
problem in IIS, but I don't know what types should be there and
what the type descriptions need to be.
If anyone can help me with this, I really need the help to
get this to work with Vista. If you have instructions, can you
really spell it out for me please with as much step by step
instructions as possible please, I want to be sure to do it right.
Thank you so much for your help, I really need it!
David

David,
ColdFusion 8 should work with Vista on IIS 7without any
tweaks.
Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"davepevans" <[email protected]> wrote in
message news:fcqb86$k45$[email protected]..
> Need help, tried other stuff on other postings trying to
edit jrundll file that
> doesn't seem to exist
>
> I'll look at so many places to try and get coldfusion 7
or 8 to work with IIS
> or Apache on Windows Vista Ultimate which came
pre-loaded with the new laptop.
>
> It just gives me a 404 error complaining about the MIME
types.
> I saw one forum that I need to edit the
wcnfiguration.config files (some name
> similar to that) in the system 32 interdel folder, but I
get an access denied
> error when trying to edit in notepad....even though I am
logged in as the
> administrator.
>
> The index page for coldfusion works afte the install as
well as IIS 7.0 is
> working fine, but when trying to execute a .cfm fikle it
just gives that 404
> error and doesn't seem to recognise the .cfm file. I
tried adding the CFM in
> MIME types in IIS admin and selected
coldfusion/application but it didn't work.
> I then changed the CFM descrip to text/html (something
like that) and it then
> launched the cfm file and showed the html part of it,
but didn't process the
> coldfusion. It may be a simple MIME configuiration
problem in IIS, but I don't
> know what types should be there and what the type
descriptions need to be.
>
> If anyone can help me with this, I really need the help
to get this to work
> with Vista. If you have instructions, can you really
spell it out for me please
> with as much step by step instructions as possible
please, I want to be sure to
> do it right.
>
> Thank you so much for your help, I really need it!
>
> David
>

Making the WMB54G work with Vista (Service Pack 1) - it does work.

I posted this in response to a thread, thought it could use its own topic.
There is hope and potential success for Vista users!   I got the WMB54G 2 days ago. I spent 6 hours with it and nearly threw the product AND my computer out the window the first night. I scoured this forum for the past two days, and by putting pieces together from various threads, I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan, it worked perfectly the first time I tried the new approach. I will try to write a step by step process of what I did in the next few days but for now.....
1. Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
2. You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum.
3. Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later.
4. Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
5. Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup. i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase.
6. Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
7. In your Program Files directory, find \Linksys\wmb54g\wmb54g.exe, \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files, right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.
THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
8. I'd suggest restarting the computer now.
9. You might get a "WMB54G.exe has stopped running error" on restart... that's ok
10. Start the following files in this order:
cmas2ds.exe
cmflywav.exe
wmb54g.exe
11. The utility should start, and then you can connect to the bridge via the system tray icon. - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
12. Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart.
I hope this works for you.
Solved!
Go to Solution.

I finally got my WMB54G to work with Vista SR1. It took me 4 hours of struggling to figure it out though.
What I did was:
1. Download the latest utility and firmware from the linksys support site.
2. To set up the device, preferably use http://192.168.1.210. There are http setup instructions on the linksys customer service site. Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can. If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
4. Install the latest utility from the support site but do not run the main setup. Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME. Walk Away and let the installer finish and close. Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
5. Restart the computer
Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device. Keep in mind I do not have WEP or anything -- just unsecured wireless.
Good luck.
Mike
Message Edited by jmfife on 01-17-2009 10:51 AM
Message Edited by jmfife on 01-17-2009 10:54 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-17-2009 11:05 AM

W500: using the switchable graphics with vista ultimate without the power manager software?

seriously, invest in a new hitachi travelstar 320gb for 49 bucks from that tiger place online and a usb hard drive caddy, pop in your free clonezilla cd and your rescue and recovery problems will be over!
after reading all the problems with that software i figured my data was too valuble to get caught in that mess so for under 75 bucks problem solved and i rid my w500 of that bloatware. even cheaper then ordering the recovery disks from lenovo.
working on getting rid of the rest of the useless software now.
hey question, how do you use the switchable graphics on the w500 with vista ultimate without the power manager software? if you can thats next!!
Moderator note: Question added to subject line for clarity.
Message Edited by Agotthelf on 28-04-2009 08:45 AM

That's because you are asking a T500/W500 question in the Thinkvantage forum. Anyway, the answer to your question is in this thread.
ATI recently started packaging their switchable graphics driver together with their regular Catalyst. So downloading their latest driver Catalyst 9.4 from the ATI/AMD site and then modifying it with the Mobility Modder will allow you to use switchable graphics without the power manager. The little problem is just that the released version of the Mobility Modder stopped working with Catalyst 9.2 and you are on your own getting a modified Modder working on 9.4, see here.
So I decided not to make more work for myself staying on a modded Catalyst 9.1 and for the time being living without switchable graphics.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Adobe Photoshop 6.0 - will it work with Vista?

Hey there -
I bought Photoshop, Illustrator, InDesign, etc in 2001 (I don't know if that is relevant or not), and have Photoshop 6.0, for example.
My laptop with Windows XP is dying very soon. I may be forced to get a computer that has Vista.
Will my software work with Vista?
I appreciate you help!
Alex

I sent myself an email back when I upgraded to Vista, I just looked back and found the email. It had some links in it (which are no longer good), but there was some useful information and troubleshooting guides on there on how to get various older versions to work on Vista machines. I was thinking there was a "trick" on there about setting the date back on the computer or something while reinstalling Illustrator in order to get it to work. I have AI 10 at home as well, but I have not yet installed it on the Vista Machine as I got CS3 and use it on my XP machine just fine.
If I were you I would hold off as long as you can, like Marian said, and maybe by then CS5 will be out too.

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

AUDIGY 2 ZS doesnt works with vista ultimate

Similar Messages

Maybe you are looking for