[Audigy 2 Zs] Dsp effects on microphone and mp3 recording on Windows 7?

Hello.
I have a SB Audigy 2 zs platinum.
Is there a way to enable dsp effects on microphone and mp3 recording under Windows 7?
I'm a musician, and I bought this soundcard for the possibility of a simple and fast recording with eax + media source.
When beta and RC of windows 7 were out it was impossible, I've just installed Windows 7 Ultimate Edition and I don't want destroy my sistem installing and installing drivers.
I've read this forum and I found some solutions: kx drivers, unofficial driver cd, and another driver.
So I'm very confused. I'm not interested about 5.. Only dsp effects on microphone and direct mp3 recording.
Is it possible or my audigy is ready for trash can?

No solution?

Similar Messages

  • Transconding - Mixing in live streaming Microphone and MP3

    Hello,
    We intend to develop a Flex client application the user to send audio from your microphone and mp3 at the same time to a server that Flash Media Server.
    It would be a mix of microphone and music in mp3 that is playing in the application at the same time transmitted to the listeners.
    What will be the version of Flash Media Server that enables this mixing of audio from microphone and music played on the client in flex? Which version of Flash Media Server that can best meet my needs?

    As of now you won't be able to publish any local content say like mp3 from Flash Client to FMS. You would have to have mp3 file stored on server and then write some kind of logic where your audio content from microphone and mp3 playback is synced. There is no direct way that you can mix two contents and playback it as one stream. And you will need Flash Media Interactive Editon if you plan to write any server-side logic for sync.

  • Mixing in live streaming Microphone and MP3

    Hello,
    We intend to develop a Flex client application the user to send audio from your microphone and mp3 at the same time to a server that Flash Media Server.
    It would be a mix of microphone and music in mp3 that is playing in the application at the same time transmitted to the listeners.
    What will be the version of Flash Media Server that enables this mixing of audio from microphone and music played on the client in flex? Which version of Flash Media Server that can best meet my needs?

    As of now you won't be able to publish any local content say like mp3 from Flash Client to FMS. You would have to have mp3 file stored on server and then write some kind of logic where your audio content from microphone and mp3 playback is synced. There is no direct way that you can mix two contents and playback it as one stream. And you will need Flash Media Interactive Editon if you plan to write any server-side logic for sync.

  • Adobe After Effects CS5 Crash and compatibility problems with Windows 7 64-bit

    Hello,
    I get a lot of crashes of After Effects CS5. I get the message thar Monitor Kernel program stopped responding and recovered.
    I also did a compatibility test and found that After Effects CS5 is not compatible with Windows 7 Premium 64-bit.
    Could you suggest a solution please?
    Thank you
    Giannis Stravolaimos

    I solved the problem by myself.... as usual

  • How to turn off iMac 27inch Microphone and still record audio

    Yea I know big brothers trying to listen in
    How to turn of the microphone iMac 27inch
    yea am using Windows XP on bootcamp partitioned drive
    yea its offical XP Home sp2
    I am trying to record some audio, playing from a mp4 video,
    using Nero wave editor
    so i can save the recorded audio as mp3,
    but when i play back the sample,
    i hear its picked up all the sound from the microphone,
    how do i turn it off, so i can record direct from the soundcard and not the microphone.
    but even when i turn off the microphone from the speaker icon in the task bar
    no sound is streaming through Nero's record console
    even if i have a video clip playing in the background
    its as if the microphone is the sound card...
    extreamely frustrating
    any help would be great...
    Nero
    Device settings
    input device: Cirrus Logic HD Audio
    Output device: Cirrus Logic HD Audio

    Hi
    I have the same problem exactly on my 20 in imac with windows 7 . I have spent hours trying to disable this mic . If you find a solution will you please send it to me and I will do likewise .
    Regards
    Ray
    Dublin

  • Audigy 2 NX: EAX effects with MIDI playb

    Is the Audigy 2 NX capabable of having the EAX audio effects work with MIDI playback? That is, when I "Enable Audio Effects" in the EAX console, I can hear the effects with wav and mp3 files but midi files sound no different. Is this a limitation of this product? I'm pretty sure I was able to do this with older sound blaster (pci) products. I've always connected my keyboards to sound blasters to make use of the sound font technology. If I could make use of the EAX effects, it would make everything sound much better.
    If this is not possible, I'm curious as to why.
    -Thanks

    Hello
    I have exactly the same error with my Audigy Player. I can remember, having used MIDI EAX effects with my old Soundblaster Li've!. However CD, Line and everything else works fine with EAX, why not MIDI? I think it's a bug and I am using the newest Advanced HD 4.0 drivers. If you turn your speakers VERY loud you can even HEAR a small amout of chorus and reverb. But the Sources are up to 0.0 db and 00 %. So there has to be much more of it!
    I don't know of any solution, yet. It's really frustrating, because MIDI playback is one of the primary things I had in mind when buying this junk audio card.

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Need help with Emu 0404 and DSP Effects

    Hi,
    This might be a bit of a noob question, but I'm completely new to the world of recording and effects. I have the Emu 0404 PCI soundcard and I'm trying to record sth with the DSP effects. I used the standard settings with ASIO send (PCI Card in L) and added effects, but when I use a recording program only the clean signal is recorded. I tried moving the send insert at the end of the list, but that didn't help. So how can I record sth with the DSP effects? I couldn't really find anythinguseful in the help file.

    I have the same issue, anyone know a way around this? I have
    a image i wish to grow onmouse over, then using the same behavior
    but shrink with mouseout, it gets some wierd issues, like if you
    put the mouse in between it oscillates back and forth, its not
    smooth.

  • Audigy 2 ZS and Surround Mixer in Windows 7

    +?
    Ok, I just installed Windows 7 Enterprise on a new HP XW 4600 workstation (NL, Dutch). This is a clean install. I have a Audigy 2 ZS (SB0350) and I dont have the surround mixer. Here is what I did:
    ?Install Windows 7 Enterprise and take all the pathes from Microsoft.
    2.
    ?Intall the Audigy 2 ZS soundblaster? card in the computer
    3.
    ?After the boot up I ingnore the message ?found new hardware?
    4.
    ?I go to the Creative website and download the following programs
    SBAX_PCDRV_LB_2_8_00 and WAVESTD_PCAPP_LB_7_2_00? which are recommended for my sound card.
    5.
    ?I cant find the surround mixer, it is even not installed
    6.
    ?I try the ?webupdate? there are some updates and I install them all
    7.
    ?Again no Surround Mixer.
    Can someone explain what I do or did wrong ?
    I realy need the Surround Mixer !!

    /Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
    i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
    There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
    The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
    Workarounds:
    - install the 32-bit (x86) version of Windows XP.
    - limit to less than 4GB the amount of RAM available to Windows.
    - enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
    Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
    Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
    Workarounds:
    - install the 32-bit (x86) version of Windows
    - limit the RAM available to Windows to less than 4GB
    - enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
    Daniel K's Drivers
    <a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
    [color="#000000"]
    [color="#000000"]Robert McClelland's Drivers
    <a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

  • [SB Audigy 2] Enabling Audio Effects in EAX Console No Sound in Games.

    K[SB Audigy 2] Enabling Audio Effects in EAX Console > No Sound in Games.7 Subject says it all.
    Got an SB Audigy 2 from a friend, installed the latest drivers. Enabled the Audio Effects in the EAX Console ('Advanced EQ > Pop' to be more specific) Music sounds great and all, but most games I play will have no sound. Disabling the effects returns the sound. Only happens with games that use EAX btw, obviously. I would really like to be able to play games with the improved sound.
    Is this suppose to happen? I've tried the unnoficial drivers as well, no difference.
    Thanks in advance.

    ORe: [SB Audigy 2] Enabling Audio Effects in EAX Console > No Sound in Games.g Man oh man, why didn't I try that myself.. It works, I will now sculpt a small statue of JRosenfeld<span class="lia-user-name UserName">, place it in my garden and pray there before each gaming session.. Thanks!! =)

  • Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

    if you can help me please alguin
    Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

    Without proper system info and otehr technical details nobody can tell you anything.
    Mylenium

  • Can I record sound using a microphone and then upload it to server?

    Hello guys I thank you in advance for reading this. What I want to know is if it is possible to record a sound clip using a microphone and then upload it to the server using a swf applet in a webpage. Im an experienced java/javascript programmer but just starting out with flash/action script. What technologies will I need to do this? Can I do this simply using simply an swf file and an apache/php or jsp page? Again, thanks alot for your help.
    -BeWilled

    You can Microphone class in Flash to record the sound and it will directly upload to FMS server .
    Use the Microphone class to capture audio from a microphone attached to a computer . Use the Microphone class to monitor the audio locally. Use the NetConnection and NetStream classes to transmit the audio to Flash Media Server. Flash Media Server can send the audio to other servers and broadcast it to other clients running Swf files .
    Below link might help you in doing this : http://www.adobe.com/devnet/air/flex/articles/using_mic_api.html

  • Can Adobe Illustrator match inner bevel effects of inDesign and Photoshop?

    Can Adobe Illustrator match or simulate inner bevel effects of inDesign and Photoshop? If it is possible, please explain how to get a soft inner bevel on type or vector shape in Adobe Illustrator CS4 that can be set up to be identical (or, at least, very close) to the layer styles of PS and the type/fill/stroke/object effects of ID. So far, I have not been able to achieve the same look with 3D extrude and bevel in AI. I want a solid red object with a soft 16 point white-tint highlight and a soft 16 point black tint shadow. If it is not something that is possible with 3D extrude and bevel settings, this something that must or could be done manually with the gradient mesh tool?

    I’ve vectorized everything except the 3D red portion.

  • I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

    I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

    David Boroditsky wrote:
    The problem is that the mac chokes on having 2 identical mics attached at the same time.
    Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
    The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

  • Is there a sound card with a Microphone AND Line In jack on the boa

    I have been looking through Creative's cards and it seems like they all share the Microphone and Line In on one jack. I need 2 separate jacks because I need to use both at the same time. I do not have a free dri've bay for a bay device either, so I need the jacks to be on the card itself.
    Does Creative make a sound card like this? Or should I look somewhere else?

    ya, creative emu0k audio processor (wdm) has....

Maybe you are looking for