Audigy 2 ZS & Front of case audio/mic por

I have the Audigy 2 ZS. I would like to hook it up to the Front of the Case Mic and Head Phone ports! Anyone know how to do it's Will any sound card allow this?

I don't need to do that, I just need to know which connectors to stick in which pins : \?I've read up on this and itll work by just stickin' em in the proper pins:?[IMG"]http://img444.imageshack.us/img444/4284/connectorwv6.jpg[/IMG]?The 6 Circles are the connectors at the back of my card, and the two squares on the right are representing the pci connector (pheer my 337 paint skills!!!). Anyway, just a lil diagram for some orientation. Anyone know which connectors I need to fit into which number pin?

Similar Messages

How do I connect the front-of-case audio inputs to my x-fi extreme mus

Pretty much as it says in the title! I want to connect the microphone and headphone connectors to my extreme music, but i can't work out which pins to connect them to. Is there a diagram showing what each pin is for? I've been googling for ages and can't fine one.

You can go here http://www.devhardware.com/forums/multimedia-73/audigy-2-zs-front-of-case-audio-mic-connectors-5584-8.html
and to make an adaptor so that the pins fit firmly, you can click here
http://audigy2zshowto.blogspot.com/
There is a white connector in the top left of the sound card.
Here is the pin layout for that connector (I did not make this. The headphone and mic jacks seem correct; But other pins may not be, as I have not confirmed them all yet):
pin 0 is closest to the back panel of the card. See this http://www.devhardware.com/forums/attachment.php?attachmentid=983
for a picture submitted by Davidl9999 in the above devhardware link.
- Analog Ground
2 - Analog Headphone Out Left
3 - Audio Backpanel Mute -- short to ground to mute the backpanel (when headphones are plugged in)
4 - Analog Headphone Out Right
5 - same as #3
6 - Mic input from front panel
7 - key pin (shouldn't be there)
8 - VREF out -- voltage reference for Mic
9 - MIC IN MUTE -- ground when mic isn't plugged in, +2VDC when mic is plugged in
0 - Audio cable detect -- will be ground when headphones are plugged in (not normally used)
*Note: If you connect pin 3 with pin , the back panel on the sound card becomes muted.
*I know Creative does not give any support about doing this, as they will just tell you it can't be done without ordering the platinum version of their sound card. But that is a fib. I think they are just trying to get more money out of the unsuspecting customer, which is not right. I wonder if this thread will get deleted for me posting this.Message Edited by potatopopper on 0-05-2006 0:03 PMMessage Edited by potatopopper on 0-05-2006 0:07 PM

Audigy 2 Value connecting Front-of-case USB/Mic Inp

Hey guys,
I've been searching all day for some info on how to connect my Audigy 2 Value card to the front of case audio and mic connectors on my new case that i just bought:
It's an NZXT Trinity Classic Series, you can find it on the NZXT website.
The creative manuals and tech support are utterly useless with helping me, so hopefully one of you can!!! One of the main reasons i bought this case was for the front usb and audio ports because i am SO sick of having to go to the back of my comp and plug/unplug my mic.
Anyway, like i said before, I have an Audigy 2 Value card (similar to a ZS apparently).
In my new case, I have the following connectors for my mic and headphone jack at the front of the case:
Mic-In
L-Ret
Ground
R-Ret
Mic-Power
L-Out
R-Out
Again, I have an AUDIGY 2 VALUE, not a ZS :\. On the opposite side of the PCI slot connector I have the following:
A white bar with 0 pins, of which I tried to connect my connectors to. However, the connectors are too big and don't fit onto the pins.
Next to the white bar, i've got 2 black connectors each with 4 pins but i'm pretty sure they are not what i'm looking for )TAD and Aux_in).
Anyway, any help is appreciated : \

I don't need to do that, I just need to know which connectors to stick in which pins : \?I've read up on this and itll work by just stickin' em in the proper pins:?[IMG"]http://img444.imageshack.us/img444/4284/connectorwv6.jpg[/IMG]?The 6 Circles are the connectors at the back of my card, and the two squares on the right are representing the pci connector (pheer my 337 paint skills!!!). Anyway, just a lil diagram for some orientation. Anyone know which connectors I need to fit into which number pin?

Audigy2 and case audio connect

I've searched the site, and still haven't found any constructi've information regarding the connection of front-of-case audio connectors to an Audigy2 card. I have both a Mic in and a headphone jack on the front of my case, and I'd really like to get them to work. If someone can get me any information on how I can connect them to my Audigy2 (Model SB0240). Thanks!

Did your search turn up this thread:
<a href=http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3949#M394 9 target=_blank>http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3949#M394 9[/url]
-Dave
[email protected]

Front and Rear Audio Through only one Socket - Sound Blaster Live! 24

<p class="MsoNormal">PLEASE HELP ?
<p class="MsoNormal">I'm getting Front and Rear Audio through the front speakers (Front Socket), and nothing out of the back.
All cables are set up correctly; I have reinstalled drivers, updated drivers etc. and the software.
What?s going on ? :S

I'll answer you here, as I believe it may be helpful to other users as well... You will need to download the latest drivers for Li've! 24-bit under Vista, which are available [url="http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+Vista+32-bit&region=&Product_Name=Li've%2+24-bit&Product_ID=035&modelnumber=&driverlang=033&OS= 26&drivertype=0&x=29&y=0">here[/url]. These add AudioConsole, which allows you to select CMSS options for your soundcard.
amm44 wrote:
On Windows XP this was never the case, for surround sound I would leave it in Dolby mode.
This is indeed strange... In ProLogic mode, as I already said, it'sproduces?surround sound from the 2 front channels but this is not the same as discrete sound, which is eventually 6-channel analog or Dolby Digital. It really all depends on the content you are playing. Also note, that a lot of the Dolby movies available on the web, may use AC-3 format, but may still be stereo only. On this content ProLogig will produce nice surround sound. (Media Player Classic states clearly how many channels are actually available)?If you however playback a true 6-channel AC-3 movie and you have ProLogic enabled, you will most probably not hear any dialogue, or just its echoe... (Assuming that you leave the AC-3 decoding to happen on the soundcard, which will then send the signal through the 6 analog channels)?How is your soundcard connected to the receiver? SPDIF/Optical or only analog??

Computer Case Audio Pan

Hey people. I've got two questions?to ask, slightly off from each other but anyway... Firstly the reason I started this post. I was wondering how I can connect my soundcard (SoundBlaster X-Fi Fatality)?to the case audio jacks (headphone and microphone jacks). The reason I ask is because I want to be able to plug my monitor speakers into the back of my computer and my headphones into the case frontal panel (NOT the X-Fi console). Where would I connect the jumpers onto the soundcard if this is possible? Otherwise (and this is my second question) am I able to use the X-Fi jacks for my headphones and the AC'97 onboard sound for my monitor speakers? I remember reading in the past that there can be conflicts from having two different sound devices so I disabled my AC'97 so that I can use the SoundBlaster effecti'vely. Thanks

it is posable to use the case conectores. but not directly. it requires aditional parts.
some were around here i've got a mag that teles ya what parts and were to get them at.
and radioshack does not carry the primary parts so dont bother gooing thir. ill se if i can locate the mag. cause im wantting to use my case front conectors to.
ok i found the mag. this may get expenci've cause u will want to get more than of each part in case u make a mistake.
im not posting the required info here. if u wish to give this a try please email me and i will provide the details then.Message Edited by clamo on 2-0-20060:22 AM

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

M30 - Front Mode and Audio/Video Control buttons don't work

Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
Thanks

Hi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye

Front Row .mov - audio only

Hi guys, i've been trying to watch some .MOV files in Front Row and it has issues with some only playing audio.
As far as i can deduce, with basically nil knowledge about computing, the common theme with files played in Front Row, playing audio only, is that they have been filmed on iphone with the iPhone upright and hence the format described by QTime Inspector as the video's 'normal size' is 720x1280 but the displayed/played format is 1280x 720.
I've played with all settings in Movie Properties (there were only a small handful of links to discussions with folks experiencing similar issues) to no avail.
It isn't essential that i can see these movies in Front Row, but i would like to be able to.
any help would be ace, thank you.

Hi.
Have you tried loading Perian (www.perian.org)? That will provide you with many additional CODECs which SHOULD solve the problem...

Front Row - distorted audio

Since installing Leopard, the new Front Row plays audio in a distorted manor. The track timing is fine just the sound is hideous. I fear it has insulted my Bowers and Wilkins somewhat I noticed iTunes had an enhanced audio mode, not sure how long that one has been there, but have turned it off. Although now Front Row seems independent of iTunes, unlike before where you could switch between a iTunes and Front Row and the track would remain playing. So this suggests there must be some audio settings for Front Row? But where are they?
I hope someone would be as kind to have a look into this for me.
Something not strictly unrelated...I have noticed when plugging a USB device or my MBP into TV, I get really bad interference on the audio. It's not like any of the cables are touching. I have tried with the power cable unplugged too but it's still there.

Thanks for your diligence. I'm going to go ahead and mark this resolved because I think the answer was pretty much obvious from the beginning, viz., that Front Row is lost to us now. I was hoping there would be some kind of fix, but that was just wishful thinking.
Maybe if I had taken precautions the same way you did, maybe then I would be able to restore iTunes 10 and would be able to use Front Row a little while longer. But in over 20 years of being a Mac user, I've never felt it necessary to take such precautions before an update/upgrade of Apple software in the event I would be truly dissatisfied with the new version or would actually lose functionality. So even if I had backups, I've never downgraded software before and don't even know how.
The truth is, if it hadn't been iTunes 11 that broke Front Row for me, it would have been something else eventually. And since Snow Leopard is now 2 generations behind and I'm going to have to trade up at some point, I might as well admit defeat and forget about Front Row.
Apple wins this round, but I'll be more prepared next time so I don't get screwed out of a perfectly good application.

PCI Express X-FI Xtreme Audio - Mic and mixer problems

6PCI Express X-FI Xtreme Audio - Mic and mixer problems' Trouble started two days ago when I updated to the latest X-FI drivers. Now I have no mixer and I can't figure out how to get my mic to work. The only thing that has changed is the updating of drivers. I am using senheiser headphones with mic for use on ventrillo. In the old set up I could go into the mixer and tell the software that the Line-In was a mic and it would work perfectly. Now I can't get the mic to work at all since there is no creative mixer. The windows mixer doesn't allow you to do anything worth wild.
I don't have the old software so I can't go back to the old setup. I am using Vista 64. What the heck am I doing wrong? Why won't the software now recognize that I am plugging in a mic!?!?!?
BAH!!!!
PLEASE HELP!

Doesn't Vista have some sort of automatic checkpointing feature that gives you a way to back up to a point before you updated the drivers?
-Dave
?[email protected]

Audigy 2 Front Drive in Audigy 2

Hi:
I have an Audigy 2 ZS Sound Card and an Audigy 2 Front Dri've. I want to know if I can connect the Audigy 2 Front Dri've to the Audigy 2 ZS Sound Card.
Thank you.

Both are Audigy 2 cards so, ...
(As stated here many times alraedy, Audigy I/O Dri've won't work w/ Audigy 2 cards.)
jutapa

I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine. The audio disappears

I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine. The audio disappears with both programs. Does anyone know what is happening with my audio capture?

Update, I took the webcam home over the weekend and tried on my home network and the outcome was the same video fine - audio delayed, is this a Skype for desktop issue?

Tactic3D Rage USB [WITH] 3.5MM Audio/Mic Splitter

I'm wondering if the 3.5MM 4-pole audio cable can split back to legacy Mic/Headphone jacks
using the Audio/Mic Splitter
Link: http://us.creative.com/p/gaming-head...litter-adapter
with the Tactic3D Rage USB Headset
http://us.creative.com/p/gaming-head...tic3d-rage-usb
I do not see it listed in the compatibility list,
and I was wonder why it works with Fury, but not Rage.
or if does, and if not. why it doesn't
Thanks for any replies, really appreciate it.

The Microphone does not work very good with 3.5MM,
I had to boost the mic & Level both to 100%, and still it's not good.
Sound was only coming from left speaker from the mic.

Dual 1.25 MDD audio/mic input jack broken--Need replacement parts??

Hello. I'm in need of the audio input/output 1/4" jacks on the rear of the logic board of my Mac dual 1.25 Mirror Door Drive tower. They appear to be assembled in one unit. It has "312HB" markings on it. Somehow the Mic input has physically broken and will not keep the 1/4" mic plugged in. Apple told me that I need to replace the entire board. I know that's not true. Everything works fine. I just don't have any audio/mic input. Does anyone know where I might find a replacement part or maybe even a junk logic board that I can grab the jack from and solder it onto my board? I've torn apart all my ancient PCs out in the shed and they don't have the same type units. Any help or tips would be great.
Thanks much,
Robert

I had started this quest when I found out that I could get several other brands of webcams other than the iSight. The problem is that most of the ones that I saw that did have a built in mic, needed to still be input into the audio in. I think I solved it tho. I finally won an iSight on ebay whch is supposed to have an internal mic and runs thru the firewire. I probably spent way too much but I know it's worth it to not have to deal with the headaches. The plug still bugs the heck out of me tho. I just always have to have everything in tip top shape.

Audigy 2 ZS & Front of case audio/mic por

Similar Messages

Maybe you are looking for